+ All Categories
Home > Documents > Intelligent Vibration Analysis Sensor | IVAS (Prototype) · 2019-07-10 · Digital interfaces for...

Intelligent Vibration Analysis Sensor | IVAS (Prototype) · 2019-07-10 · Digital interfaces for...

Date post: 09-Jul-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
Bosch Connected Devices and Solutions GmbH | Flyer Intelligent Vibration Analysis Sensor | IVAS (Prototype) Sensor Solution for Predictive Maintenance and Process Monitoring The Intelligent Vibration Analysis Sensor (IVAS) enables predictive maintenance through vibration-based condition monitoring and so contributes to significant cost reductions. By analyzing the vibrations, created by machines and other moving equipment e.g. in pumps, motors, linear drives or ventilation systems, it is possible to assess the wear condition in a very early stage. This effectively allows a precocious warning and the prevention of unplanned standstills and secondary damages. For process monitoring, IVAS enables an integrated continuous quality control and gives the information that is necessary, to set the optimal process parameters. Thus, IVAS allows to increase efficiency, machine usage and quality. BENEFITS Enables the prediction of wear in bearings, drives, machines and other moving parts A robust and compact stainless steel housing, enables IoT applications in harsh industrial environ- ments Digital interfaces for integration into existing systems - no further data acquisition equipment necessary Easy to install, two bores (for standard M6 screws) allow a flexible sensor orientation Allows the integration of intelligent data pre-process- ing and analysis, to ensure cost efficient deployment, without additional measurement equipment Increases efficiency by delivering crucial data for the optimization of maintenance processes With algorithms that can be implemented on the sen- sor device the optimization of stress on machines, unplanned downtimes, and spoilage production is possible Integrates easily into a wide range of gateways and clouds YOUR POTENTIAL USE CASES Predictive Maintenance Condition Monitoring Process Monitoring Process and Quality Optimization THE VIBRATION SPECIALIST 3kHz Accelerometer 20kHz Accelerometer GET IN CONTACT WITH US! E-Mail: [email protected] Website: www.bosch-connectivity.com/IVAS BUILT-IN SENSORS
Transcript
Page 1: Intelligent Vibration Analysis Sensor | IVAS (Prototype) · 2019-07-10 · Digital interfaces for integration into existing systems - no further data acquisition equipment necessary

Bosch Connected Devices and Solutions GmbH | Flyer

Intelligent Vibration Analysis Sensor | IVAS (Prototype)

Sensor Solution for Predictive Maintenance and Process Monitoring

The Intelligent Vibration Analysis Sensor (IVAS) enables predictive maintenance through vibration-based condition monitoring and

so contributes to significant cost reductions. By analyzing the vibrations, created by machines and other moving equipment e.g. in

pumps, motors, linear drives or ventilation systems, it is possible to assess the wear condition in a very early stage. This effectively

allows a precocious warning and the prevention of unplanned standstills and secondary damages. For process monitoring, IVAS

enables an integrated continuous quality control and gives the information that is necessary, to set the optimal process parameters.

Thus, IVAS allows to increase efficiency, machine usage and quality.

BENEFITS ▶ Enables the prediction of wear in bearings, drives,

machines and other moving parts ▶ A robust and compact stainless steel housing,

enables IoT applications in harsh industrial environ-ments

▶ Digital interfaces for integration into existing systems - no further data acquisition equipment necessary

▶ Easy to install, two bores (for standard M6 screws) allow a flexible sensor orientation

▶ Allows the integration of intelligent data pre-process-ing and analysis, to ensure cost efficient deployment, without additional measurement equipment

▶ Increases efficiency by delivering crucial data for the optimization of maintenance processes

▶ With algorithms that can be implemented on the sen-sor device the optimization of stress on machines, unplanned downtimes, and spoilage production is possible

▶ Integrates easily into a wide range of gateways and clouds

YOUR POTENTIAL USE CASES

Predictive MaintenanceCondition Monitoring Process Monitoring Process and QualityOptimization

THE VIBRATION SPECIALIST

3kHz Accelerometer

20kHz Accelerometer

GET IN CONTACT WITH US! E-Mail: [email protected] Website: www.bosch-connectivity.com/IVAS

BUILT-IN SENSORS

Recommended