Date post: | 14-Oct-2014 |
Category: |
Documents |
Upload: | lawrence-monteiro |
View: | 168 times |
Download: | 1 times |
Interface for CATIA V5 with Associative Topology Bus™ (ATB)
June 2011Creo 1.0 - Rev H
2
Licensed module– Separately Licensed Module
• Locked (CPT-3232-L)• Floating (PTN-3232-F)
Installation– No CATIA V5 installation or
licensing required
Import and Export processor– CATProduct
• Assembly format– CATPart
• Part format– CGR
• Facet format
Interface for CATIA V5 with ATB
© 2011 PTC
3
Entity Support– Supports 3D geometry and topology– ATB-enabled
• Config option “topobus_enable” yes | no*– Visibility support
• Show / No Show• Layers• Hidden
– Facet import/export via CGR format• Config “intf3d_in_import_as_facets” yes | no | default*
– Default value for CATIA V5 is “no”– Replaces “c5_import_as_faceted” yes | no* in
Pro/ENGINEER Wildfire 4.0 (M030 and later)• Export transparency and edge color
– Pro/ENGINEER Wildfire 4.0 M090 and later– Exact Rep Face Color
• Config option “c5_color_import” yes | no*– Drawings and applications data (cabling, piping, CAE data)
are NOT supported
Interface for CATIA V5
© 2011 PTC
4
CGR Import– Import *.CGR files (parts or assemblies)– Import CATPart and/or CATProduct as faceted (extract
CGR only)– Config “intf3d_import_as_faceted_heal” yes* | no
5 times faster than exact import!
Good for Space Claim and Design-In-Context activities
CGR Export – Export Exact data as CGR (faceted)– CATPart as CGR, CATProduct
with CGR components– Exports mixed part models
(exact and facet features) as CATProductwith separate CATPart and CGR components
Interface for CATIA V5
© 2011 PTC
187 Componentsas Exact20 min
187 Componentsas CGR Healed
7 min
187 Componentsas CGR Quick
4 min
5
Operations– Mass Properties Calculation– Measurement between Faceted & Exact– Pairs Clearance– Cross Section Creation– Datum Feature Creation
Formats– Import STL, VRML, STEP Faceted, CATIA SOLM – DXF 3D & ProductView OL/ED– CATIA CGR Design-in-Context– JT
Faceted Models for “Design-in-Context”
© 2011 PTC
6
Product Structure Support– Support import and export of assemblies
containing mixed source components, i.e. CATProduct containing
• CATProduct• CATPart• CGR
– Additional support for import of assemblies containing mixed source components
• V4 *.model• Must have Interface for CATIA II license for V4
support
Distributed Pro/BATCH Support– Export and Import TTDs for
• CATPart• CATProduct• CGR
Interface for CATIA V5
© 2011 PTC
7
Associative– One-directional associativity
• CATIA V5 to Pro/ENGINEER– Creo Translated Image Model (TIM)
• Contains link to Source (CATIA V5) object
Topology– Maps geometry IDs from CATIA V5 to Creo– Maintains geometry IDs as changes are made
Bus– Checks for changes in the CATIA V5 (Source) object– Update import geometry based on changes in Source object– Change Link, Make Independent
Associative Topology Bus
© 2011 PTC
8
Cables as geometry– Export and Import
• Intf3d_out_cables yes | no*• Facet and exact representation
Updated Facet Export Controls– New in Pro/ENGINEER Wildfire
4.0 M120 and Creo Elements/Pro 5.0 M020– New Step Size
• Intf3d_out_use_step_size yes | no*• Defines uniform size for triangles
– Chord Height and Step Size calculated per part• Intf3d_out_diff_chord_heights yes | no*• Intf3d_out_diff_step_sizes yes | no*• Facet assembly formats only: CATProduct with CGR, JT
Cables as Geometry & Facet Export Controls
New in Pro/ENGINEER Wildfire 4.0
© 2011 PTC
w/o Step Size
with Step Size
9
Long Names (up to 80 characters) supported– Special Characters replaced
– ATB Mode• in Model Tree• without Truncation
– Non-ATB Mode• Truncated in Model Tree
– With Duplicates Indexed• Full Names Available
Support for CATIA Long Names
© 2011 PTC
10
Heterogeneous Design-In-Context (HDIC)– Multi-CAD (Pro/ENGINEER, UG, CATIA V5) support in Windchill PDMLink
• Represent complete mixed CAD product structure in Pro/ENGINEER and Windchill.– One WT Part – one source CAD Document – multiple image CAD Documents
• Open CATIA V5 CAD Documents in Pro/ENGINEER to create ATB “image” CAD Documents.– CATIA V4 supported in the context of a CATIA V5 assembly.
– ATB enables: Check Status, Unlink, Re-link, and Associative Updates on Pro/ENGINEER TIM (image) models
– Required Components• Pro/ENGINEER Wildfire 4.0 M060 or later• CATIA V5 R16 (R17 supported in M080 or later)• Windchill Workgroup Manager for CATIA V5• PDMLink 9.1 F000 or later
New in Pro/ENGINEER Wildfire 4.0 and PDMLink 9.1
© 2011 PTC
Part
SourceDerived
TIM
11
New in Creo Elements/Pro 5.0
Shared Memory– Limited to GPI-based processors
• CATIA V5, CGR, JT, ProductView, UG, Autodesk Inventor, and CADDS5
– Introduced in Pro/ENGINEER Wildfire 4.0 (M080)
– Benefits• Reduced processing time• Reduced memory (RAM) usage
© 2011 PTC
Import model (65 MB)
1000% 600%Faster lessRAM
Before Now
01020304050
Minutes GB
M070
M080
Wildfire 4.0
Shared Memory Performance & Resource
12
New Import Wizards– Greater transparency of data
exchange options– Improved workflow– Finer control of settings
Updated import log files– XML format (*.xml)– Log Options
• Generate on Import– Short, Long or None
• Dynamically generate– Info > Data Exchange > Import Log
– Status Indicator
New in Creo Elements/Pro 5.0
© 2011 PTC
13
Relevant Config.pro to Profile Mappings
© 2011 PTC
Pro/ENGINEER Wildfire 4.0 Creo Elements/Pro 5.0Config.pro Value Profile Setting
topobus_enable yes | no* Model tab – Enable ATB
intf3d_in_import_as_facetsand
c5_import_as_faceted
yes | no | default*
yes | no*
Model tab – Import as facet model
c5_color_import yes | no* Misc tab – Include Colors
14
Allow users to choose the amount of data to import
– Leverage layers, the search tool, and rules to improve the selection process
Three levels of data– Structure
• Fastest to load, no graphics– Graphics
• Quick to load, lightweight graphics• Meta data
– Master• Full geometric definition
Upgrade from– Structure > Graphics or Master– Graphics > Master
New in Creo 1.0
Selective Assembly Import
© 2011PTC
Structure
Graphics
Master
15
(1) Pro/ENGINEER Wildfire 4.0 Platform Support Matrix
(2) Creo Elemensts/Pro 5.0 Platform Support Matrix
(3) Creo 1.0 Platform Support Matrix
Platform Support
© 2011 PTC
Interface for CATIA V5 with ATB
Platforms Pro/ENGINEER Wildfire 4.0(1)
Creo Elements/Pro 5.0(2) Creo 1.0(3)
OS Processor 32 bit 64 bit 32 bit 64 bit 32 bit 64 bitWindows XP Pentium/Xeon
Windows Vista Pentium/Xeon – –
Windows 7 Pentium/Xeon
HP-UX PA8000 – – – – –
SUN Solaris Ultra SPARC II – – – – –
SUN Solaris AMD & Intel – – –
Legend Platform and processor supported Platform supported, but processor not supported– Platform not supported
16
Interface for CATIA V5 - Version Support
CATIA V5 Versions SupportPro/ENGINEER
Wildfire 4.0Creo
Elements/Pro 5.0 Creo 1.0
Import Export(1) Import Export(1) Import Export(1)
CAT
IA V
5 Ve
rsio
n 10
14, 15, 16(a)
17 (2)
18, 19 (3)
20 (4)
© 2011PTC
(1) Export format specified via config.pro option “intf3d_out_catia_v5_version” introduced in Pro/ENGINEER Wildfire 4.0 (M030) set to defaultt of “10”a) As of Pro/ENGINEER Wildfire 4.0 (M120) and Creo Elements/Pro 5.0 (M010) default became 16
(2) Support introduced in in Pro/ENGINEER Wildfire 4.0 (M080)(3) Support introduced in in Pro/ENGINEER Wildfire 4.0 (M120) and Creo Elements/Pro 5.0 (M010)(4) Support introduced in in Pro/ENGINEER Wildfire 4.0 (M180) and Creo Elements/Pro 5.0 (M080)(5) TPI 144061 details CATIA V5 support in previous releases.
Legend Supported Not supported– Not yet available for support