INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
A SCHEDULE - INTERIOR FIXED ASSETS
WORKS
GENERAL NOTES: -
PARTITIONS / PANELLING
General Specification for partition :-
Finishing :-
SKIN: -12mm Exterior Grade Particle Board shall be screwed to frame work on both sides with
joints as shown or directed.
Make: Associate / Action Tesa / Eco boards/ Archid / Willson.
SKIRTING : In the same alignment, 3" high in 12mm thk Particle Board with a groove finished
with laminate / veneer as the case maybe, or as directed by the Architect.
VENEER:- 4mm thk natural venner with matching superior approved grade to be fixed to the
plywood having joints as shown or directed complete with melamine polish finish.
Make: Century / Durian / Archid or equivalent approved make
INTERIOR RENOVATION WORK FOR STATE BANK OF INDIA, SME
BRANCH MULUND (W) MULUND MUMBAI. (PRICE BID)
1. The plywood considered in this estimate shall be of Archid/Duro/Green/Century or
equivalant approved make commerical Plywood/Block board (as per sample approved by the
Architect/SBIIMS) for all the items of Interior & Furniture works.
2. The rate shall be inclusive of anti termite coating on all sides to plywood, teak wood & all the
other wooden components of Asian paints or equivalent approved make.
3. All internal woodwork / Plywood shall be treated with antitermite preservative.
4. All internal framework shall be of Aluminium unless otherwise specified as Teakwood.
5. AII exposed edges of Plywood shall be fixed with C.P. Teak Lipping of size as directed by
Architect.
6. The skinning shall be in 12 mm thk Exterior Grade Particle Board unless otherwise
specified.
7. All exposed veneer surfaces shall be finished with melamine polish . The thickness of the
veneer shall be 4.0mm & that of laminate shall be 1.0mm thk. However if the same shall vary,
no extra charges are payable for the additional thickness. The approved veneer shall be
finished with natural melamine polish of minimum 2 coats to have desired matt melamine finish
where ever specified.
8. Rate for full height partitions to include the cost of framework above false ceiling as required
to fix the same to the ceiling slab for which no extra payment shall be made and the rate
quoted shall be inclusive of the same.
9. Measurement of Partition & Panelling shall be limited upto 6" above False ceiling & no
separate payment shall be made for the work above 6".
10. Additional item if executed for AC purpose shall be measured in the relevant item.
11. The rate shall be also inclusive of pattas & bands, grooves at any level, any design in
veneer, textures etc including the necessary framing/ openings for Electrical, Telephone & AC
outlets.
Main frame - Aluminium sections of 16 Gauge mentioned are out of size 2"x2". Aluminium
section verticals at minimum 1' 6" - 2'-0" Centre-Centre spacing approx. and 2" X 1" size
Aluminium sections horizontal at 1' 6"-2-'0" Centre-Centre spacing approx. Extra frame below
slab soffit for conduit to run above. All verticals shall be secured to the ceiling.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/ 12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/ 12RFt.)
Make: Jindal / Hindalco / MAAN
PRICE BID CIVIL,INTERIOR EL. Page1 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
1 Providing and fixing Full ht. double skin
Partitions as per specifications and finishes
including skirting, complete as per the drawings
and instructions complete in all respects as under:
Main frame - Consisting of 2" x 2" Vertical 16
Gauge Aluminium sections placed at approx. 1'-
6" to 2'-0" Centre to Centre and horizontal
members of sectional size (16G) 2" X 1" placed
at 1'-6" to 2'-0" C/C including necessary extra
framing below slab soffit for conduits to run
above. All verticals to be secured to ceiling/beams
bottom/sides in approved style using anchor
fastners as directed at site.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/
12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/
12RFt.)
Make: Jindal / Hindalco / MAAN
Skin:- Providing and fixing 12mm thk Exterior
Grade Particle Boards on Both sides using MS
screw to frame work with joints as shown or
directed.
Make: Action Tesa / Eco boards/ Archid / Willson
or equivalent as per sample approved.
SKIRTING : In the same alignment, 3" high in
12mm thk Exterior grade approved quality and
make Particle Board with a groove finished with
laminate / veneer as the case maybe, or as
directed by the Architect.
A --do--- as above but providing both sides of the
Partitions finished with 1.00 mm thk approved
quality and shade Laminate in the pattern &
design as shown in the drawing or as directed by
Architect including necessary grooves, skirting etc
complete.
Laminate Make :Royale touche / Century / Green
lam / Merino or equivalent approved.
Adhessive: Fevicol.
390 Sft
LAMINATE:- Approved laminate shall be of 1.00mm thick.
Make: Royale touche/Century/Green lam/ Merino or equivalent approved make
PRICE BID CIVIL,INTERIOR EL. Page2 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
B --do--- as above but providing Partitions with 1.00
mm thick approved quality and shade Laminate
on One side & other side with 6mm thk Calcium
Silicate Board finished with 2 coats of approved
acryllic emulsion paint including POP punning for
surface preparation including necessary grooves,
skirting etc complete as shown or directed by
Architect.
128 Sft
C --do--- as above but providing Partitions finished
with approved quality and shade 1.0mm thk
laminate on one side & other side of the partition
to be finished with approved quality and make
4mm thk veneer finished with 2 or coats of
melamine polish includining applying
primer/preparation of surface as per sample
approved and as directed by Architect, including
necessary grooves, skirting etc complete.
Venner Make: Century / Durian / Archid or
equivalent approved make
80 Sft
D --do--- as above but providing partitions to be
provided with approved make Exterior Grade
Partical board on one side of the main frame
finished with 1.0mm thk approved laminate and
the other side of the main frame to be provided
with 12mm thick Gypsum board finished with 2
coats of approved acryllic emulsion paint as
shown and as directed by the Architect/SBIIMS
including necessary grooves, skirting etc
complete.
30 Sft
E --do--- as above but providing partitions to be
provided with approved make 12mm thick MDF
Board on both sides of the Aluminium framework
including finishing both sides with PU machine
polish as per sample approved including
necessary surface preparations, final finish etc
complete of approved shade, colour & texture as
shown in the drawing and as directed by the
Architect, including necessary grooves, skirting
etc complete.
205 Sft
F Finishing : Both side finished in 4.0 mm thk
approved Veneer including melamine polish of
desired finish, shade, texture etc complete as
shown in drawing or as directed by Architect,
including necessary grooves, skirting etc
complete.
124 Sft
PRICE BID CIVIL,INTERIOR EL. Page3 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
G Finishing : Both side 6mm thk Calcium Silicate
Board finished with 2 coats of approved acryllic
emulsion paint including POP punning for surface
preparation including necessary grooves, skirting
etc complete as shown or directed by Architect.
80 Sft
2 Providing & Fixing in position full height Semi-
Glazed partition with folowing specifications:
Main frame - Consisting of 2" x 2" Vertical 16
Gauge Aluminium sections placed at approx. 1'-
6" to 2'-0" Centre to Centre and horizontal
members of sectional size (16G) 2" X 1" placed
at Floor/skirting level, 3'0" height level, door
height at 7'0" level for remaining spacing@1'-6" to
2'-0" C/C to be maintained including necessary
extra framing below slab soffit for conduits to run
above. All verticals to be secured to ceiling/beams
bottom/sides in approved style using anchor
fastners as directed at site.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/
12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/
12RFt.)
Make: Jindal / Hindalco / MAAN
Skin:- Both sides of the main frame shall be
finished with 12mm thk approved quality and
make exterior grade Partical board screewed to
the frame with joints as directed upto 3'0" level
and from 7'0" level to the top upto false ceiling
level including providing and fixing 8 mm thk.
clear glass of Saintgobin or equivalant approved
fixed with teak wood moulded beading duly
melamine polished/painted as directed by the
Architects/SBIIMS complete. The rate should
include providing and pasting frosted Polyster film
of Garware or equivalant approved make &
design and as per drawing and as directed by
Architect.
Particle board Make: Eco boards/ Archid /
Willson/Bhutan or equivalant as per sample
approved.
SKIRTING : In the same alignment, 3" high in
12mm thk Particle Board with a groove finished
with laminate / veneer as the case maybe, or as
directed by the Architect.
PRICE BID CIVIL,INTERIOR EL. Page4 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
a --do--- as above but providing Partitions with 1.00
mm thick approved quality and shade Laminate
on One side & other side with 6mm thk Calcium
Silicate Board finished with 2 coats of approved
acryllic emulsion paint including POP punning for
surface preparation including necessary grooves,
skirting etc complete as shown or directed by
Architect.
20 Sft
3 Providing & Fixing in position about 4'-0" high
Low height Partition made out of 16 Gauge
hollow Aluminium section framing (Minimum
standard weigh as mentioned in this item). All
Vertical members to be of sectional size 2" X 2" 1
erected at 1' 6" to 2' 0" centres and Horizontal
members of size 2" X 1" to be placed at floor level
/ skirting ht. level as well as intermediate member
at 3'-0" level. Rate to include providing additional
members as per site requirement without extra
cost. The scope of work includes:
(i) 12mm. thk approved quality Exterior grade
Partical Board skin on both sides of the frame to
be screwed to the frame with joints as directed
upto 3'-0" height
(ii) Providing 8mm thk clear float glass of 1' 6"
height above 3'-0" level. The glass shall have a
height of 1'-0" on sides and 1'-6" in the centre
fixed with SS Studs / D brackets of approved
quality.
(iii) Including providing Polyster frosted film of
approved make & design on the glass.
(iv) The rate should include providing soft board
panel with felt cloth of approved texture, shade &
design, white board / white laminate in the centre
with a small shelf of 1'-0" projection with bevelled
edges in the centre of the soft board panels on
both sides.
(v) Rate includes sealing all the joints, beading for
the glass, grooves in laminate, melamine polish to
the moulding, beading & t.w members, complete
as per the directions of Architect. All Aluminium
sections shall be smooth, rust free, straight,
mitred and jointed mechanically. All works shall
be carried out as per Architectural drawings and
the directions of Engineer-in-charge.
PRICE BID CIVIL,INTERIOR EL. Page5 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Minimum Weight and makes of Aluminium
sections to be as under:
-Section 2" X 2" 16 Gauge = weighing @(3.200
kg/ 12RFt.)
-Sections 2" X 1" 16 Gauge = weighing (2.100 kg/
12RFt.)
Make of Aluminium sections: Jindal / Hindalco /
MAAN
Particle board Make: Eco boards/ Archid / Bhutan
/ Willson.
A --do-- as above but providing and fixing Partition
using Both side finished in 1.0 mm thk Laminate
as shown in drawing or as directed by Architect.
Laminate Make : Royale
touche/Century/Greenlam/ Merino or equivalent
approved make
415 Sft
B Partition using Both side finished in with 4.0 mm
thk approved veneer finished with melamine
polish as shown in drawing or as directed by
Architect.
Make: Century / Durian / Archid or equivalent
approved mak
40 Sft
4 Full Height Fully Glazed partition
A Providing and erecting in position full height
12mm thick Toughened Glass partiton fixed on
Patch fittings of Dorma/Hefle/Ozone of equivalant
approved by SBIIMS including 12mm thick
Toughned Glass door fixed on Heavy duty Dorma
or equivalant approved make Floor spring, 30mm
dia. & 600mm long S.S handle and locking
assembly from Dorma/Ozone complete.
The rate includes providing and pasting frosted
polyster film or bank's approved advertising film of
3M with computer aided design & cutting in
various colors & shade on the glass partitions &
Doors.
The scope of work includes cutting chases to the
floor and reinstating the same to its original
position without any extra cost including the cost
of other fittings & fixtures & hardware such as
spider panels, glass to glass contactors etc
complete, making necessary holes, joints to be
sealed with silicone sealant on all sides complete
in all respects etc as per directions of Architect.
The rate shall be inclusive of bent curved glass
panels wherever the partition is curved in profile
as shown in the layout plan.
320 Sft
B Same as above A….providing and fixing BACK
PAINTED 12MM THK. Toughned GLASS.
Make: Modi float Glass, Triveni Glass Ltd., Indo
Asahi Glass Co.Ltd./ Saint Gobain
50 Sft
PRICE BID CIVIL,INTERIOR EL. Page6 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
5 Partitions above False Ceiling
Providing and extending frame works of full height
partitions wherever directed and finishing with 12
mm thk Exterior Grade Particle Board on both
sides and finishing the same with approved paint
including insulating with approved insulating
material upto soffit of beam or ceiling including
properly anchoring the same using Anchor
Fasteners etc. complete making necessary cut-
outs for AC ducts etc. complete wherever
directed.
100 Sft
6 PANELLING : -
(a) Providing and fixing in position wall/column
panelling made out of :
(i) Main frame comprising of 2" X 1" size
Aluminium sections (weighing 2.10 kg/ 12 Rft) of
Jindal / Hindalco / Maan or equivalant approved
make fixed to wall at 1'-6" to 2'-0" C/C in both
horizontal as well vertical direction including
providing extra frame/members as required as per
site condition below beam/slab soffit for running
conduit etc.
(ii) Providing 12mm thk exterior grade approved
quality and make Partical board to the framing.
(iii) Providing and pasting 4mm thk Veneer of
Archid, Green, Duro, Centure or equivalant
approved make including 3 coats of melamine
polish over approved base sealer coat including
contrast skirting & band at top in the same
alignment with a groove, teakwood moulding of
approved size complete as shown in the detailed
drawing or as directed by Architect.
335 Sft
(b) --do-- as above in item No.6(a) but Top finish of
the Column/Wall panelling with 1.0 mm thk
laminate of Century / Durian / Archid or equivalent
approved make including skirting & band at top
complete as shown in detailed drawing or as
directed by Architect
310 Sft
(c ) --do-- as above in item No.6(a) but Top finish of
the panelling with Interior Grade ACP of Aluco
bond/ ALU Decor/ Alstrong / Alstone or equivalent
approved make including skirting & band at top
complete as shown in detailed drawing or as
directed by Architect.
Rate to include cost of necessary partical board /
ply backing to match the level of other finishes
such as veneer /laminate etc. in required areas.
310 Sft
PRICE BID CIVIL,INTERIOR EL. Page7 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
D --do-- as above but providing approved Fabric
over 9 mm thk commercial ply backing over
aluminium frame of specified makes. All around
the panelling, decorative teak wood mouldings
shall be provided and shall be finished with
melamine polish complete as per the instructions
of Architect.(Basic Price of fabric Rs.200/- to Rs.
275/- per meter).
85 Sft
E --do-- as above but providing wall panelling using
12mm thk IS:303 Commerical ply of
Green/Duro/Centure or equivalant approved
makes backing over aluminium framing finished
with 3mm thick designer, decorative MDF board
finished with two or more coats of Duco paint of
approved make, shade, colour & texture including
teakwood moulding of 3mm size all around the
periphery as directed by Architect.
180 Sft
F Providing & Fixing Soft Board panelling over
framework of 25 mm x 18 mm T.W. Frame at 600
mm c/c with 6mm IS:303 Commercial ply skining
on top & 12mm thk. soft board with fabric finishing
over ply complete as per drawings & directions of
the Architect/Engineer-in-charge, 25 mm x 12 mm
T. W.Moulding on edges (Basic Price of fabric
Rs.250/- meter).
55 Sft
G Providing & Fixing in position Mirror Panelling
using 6 mm thick Mirror of approved make over
19mm thick Archid/Green/Duro/Century or
equivalant approved make commercial board
backing. The mirror to be fixed with T.W beading
of size 12.5mm X 19mm, finished including
melamine polish complete as per the instructions
of Architects/SBIIMS.
50 Sft
H --do-- as above in Item No. 6(a) but providing and
fixing column/wall panelling finished with 6mm thk
Corian approved shade, colour & texture over
12mm thk particle board / 9mm thk plywood over
Aluminium frame including teakwood moulding of
3mm size all around the periphery as directed by
Architect
300 Sft
I --do-- as above but providing and fixing Wall &
Column Panelling finished with approved quality
and make 12mm thick MDF board and finished
with PU machine polish including necessary
surface preparations, etc complete in approved
shade, colour & texture including necessary
teakwood moulding of 3mm size all around the
periphery as directed by Architect
260 Sft
PRICE BID CIVIL,INTERIOR EL. Page8 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
7 Flush doors
a Providing and fixing in position 32/35mm thk
factory make water proof Solid Core Flush door
shutters for Toilets, cabins, ancillary areas
specified to match the solid partitions including
2nd class BTC ( Berma Teak Wood ) frame of
100 X 50mm finished with 1.0 mm thk approved
laminate on both sides including providing 6mm
thick seasoned Teak wood lipping to edges duly
polished/painted in matching shade,
Dorma/Dorset/Hefle make door closure,
cylinderical mortise lock of Doset /Godrej with
computerised key, SS handles, 3 Nos. S.S.Butt
hinges (125x32x2mm), S.S.tower bolt 150 mm
etc. complete as per the directions of Architect.
Samples of all Hardware fittings to be got
approved from the SBIIMS/Architect prior to its
use at site.
(i) For Toilets (Without Mortice Lock) 21 Sft
(ii) For Cabins and other ancillary areas. 42 Sft
8 FULLY GLAZED DOOR :
Providing and fixing in position 12mm thick
toughened glass door including fixed side panel.
The door to be fixed with heavy duty Dorma make
floor spring, providing 300mm long 30mm dia SS
pipe handle and door lock of Ozone/Dorma or
equivalent make with necessary cutting chases in
floor and restoring the same to its original position
complete. Rate to include providing suitable
wooden Top and bottom rail, frosted Polyster film
as per detailed Architectural drawing complete.
84 Sft
9 FALSE CEILING
A Gypsum Board Ceiling: Providing, fabrication
and fixing in position of false ceiling at a hight of
10'0" from floor (or the hight will be desided on
spot as per the site conditions) by fixing 12 mm
Th. Gypsum Board sheets on frame work of GI
sheet section. The main runners of 22 gauge GI
sheet and cross runners of 24 gauge GI sheet
must be framed to form a mesh of 2'0"x2'0" c/c.
The Gypsum Board must be fixed to the GI frame
and joints must be properly filled in with POP
paste and paper tape, supplied by the
manufacturer, to get a leveled smooth ceiling,
including acrylic paint three or more coats.
Recessing of the Gypsum Board for light fixtures
must be done alongwith extra frame work of GI
sheet section to hold the consealed light fixtures.
1950 Sft
B False Ceiling ( Armstrong )
PRICE BID CIVIL,INTERIOR EL. Page9 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and erecting false ceiling of Mineral
Fiber ceiling Board Armstrong or equivalent
approved make with framework, runners, cross
runners & suspenders from the existing ceiling as
per the manufacturers details and specification
and 600X 600mmX 15mm thk tiles of approved
design, texture & in microlook pattern including
the grids in black / white silhoutte pattern, 15mm
as per manufacturers specifications complete
including making necessary cut-outs for electrical
fixtures, AC diffusers, access etc as per the
instructions of the Architect.
Approved preminum Tile in Dune RH Microlook
category with black silhouette locking supporting
system, 15 mm grid.
Make: Armstrong /Indian Gypsum Board/Gypro.
600 Sft
C Providing and erecting false ceiling in veneer with
12 mm thk marine ply backing on teak wood
frame to be anchored to the main ceiling with
cross runners tongued and grooved. The ply to be
finished with approved 4mm thk veneer &
melamine polish etc. complete as per directions of
the Architect.
Venner Make: Century / Durian / Archid or
equivalent approved make
80 Sft
D Providing and erecting false ceiling in ACP with
12 mm thk marine ply backing on teak wood
frame to be anchored to the main ceiling with
cross runners tongued and grooved. The ply to be
finished with approved 3mm thk interior grade
ACP complete as per directions of the Architect.
50 Sft
E Providing and erecting false ceiling in colored
Corian with 6mm thk Corian over 12mm thk
marine plywood backing on teak wood frame to
be anchored to the main ceiling with cross
runners tongued and grooved, finishing the same
with corian of approved shade, colour & texture as
directed by Architect & complete as per drawings
& details.
50 Sft
10 Providing & Applying Plaster of Paris Punning up
to average thickness of 12 mm thk. on existing
walls to proper level & plumb, including Groove
Complete as per site conditions & directions of
the Architect.
250 Sft
PRICE BID CIVIL,INTERIOR EL. Page10 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
11 Providing and erecting in position Plaster of Paris
Cornices 3" x 3" in size to the false ceiling.
Including filling the gaps with POP & painting the
same with Acryllic Emulsion paint of approved
colour and texture as per instruction of Architect.
100 Rft
12 Same as above but Roller Blinds of approved
make with supporting framework etc. of approved
make, shade & colour complete in working order
with triple spring arrangement as per
manufacturers specifications & drawings &
directions of the Competent Authority.
Make: Vista / MAC / DACK / Hunter & Douglas
150 Sft.
13 Providing and fixing Full height Storage of ht. 7'-
0" and depth as specified in the drawings as per
specification below.
Skeleton - made out of 19 mm. thk Commercial
ply at end verticals, top and bottom and verticals
450mm to 600mm Centres as shown in drawing
and 6 mm thk back marine ply.
SHELVES - 19mm Thk. Plywood top and edges
finished in 0.8mm thk. Laminate to accommodate
file height removable and supported on pins.
SHUTTERS-made out of 19mm thk. commerical
ply externally finished in 4.0mm thk. Veneer with
melamine polish or 1.0 mm thk laminate and
internally finished in 0.8 mm thk. laminate as
shown or directed.
HINGES - Each shutter shall have 100mm long
oxidised brass butt hinges. Mimimum 4 nos.
hinges for each of the shutter for Full height
Storage and 3 Nos. Brass hinges for each of the
shutter for Low Height Storage to be provided.
BOLTS - Flush tower bolts from inside at top and
bottom to the shutters and magnetic catch fixed
top and bottom.
LOCKS - of approved make 4 -lever brass body
dead lock with S.S. Key.
HANDLES - 100mm wide handles of C.P.. brass
as approved by the Architect.
SKIRTING -As instructed by Architect, in marine
plywood finished in Laminate.
BACK - Back side of storage to have 6mm thk.
Commerical ply with polish finish.
Finishing :- All external surface finish with 1.0mm
thk approved laminate. All the exposed wood
surfaces shall be finished in melamine polish. In
side visible surface complete with 0.8mm thk
Laminate. Top to have Teek wood moulding as
instructed. All internal wood-work to have coat of
anti termite of approved make before polishing.
80 Sft
PRICE BID CIVIL,INTERIOR EL. Page11 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
SUM TOTAL OF SCHEDULES - INTERIOR
FIXED ASSETS WORKS
B SCHEDULE - FURNITURE WORKS
N.B: - The plywood considered in this estimate
shall be IS: 303 grade commerical Plywood for all
the items of Interior & Furniture works. The rate
shall be inclusive of anti termite coating on all
sides to plywood, teak wood & all the other
wooden components of Asian paints or equivalent
approved make.
1 Providing and fixing Low height Storage of ht. 2'-
6" or 4'-0" as desired and depth of 18" as
specified in the drawings as per specification
below.
Skeleton - made out of 19 mm. Thk IS:303 Grade
commerical Plywood (IS:303) at end verticals, top
and bottom and verticals 450mm to 600mm
Centres as shown in drawing and 6 mm thk back
ply.
SHELVES - 19mm Thk. IS:303 Grade commerical
Plywood finished with approved quality 0.8mm
thk. Laminate on both faces including edges to
accommodate file height removable and
supported on pins.
SHUTTERS-made out of 19mm thk. IS:303
commerical Plywood externally finished in MDF
with PU or 1.5mm thk laminate or 3.0mm thk.
Veneer with melamine polish and Internally
finished in 0.8 mm thk. Laminate as shown or
directed.
HINGES - Each shutter shall have 100mm long
oxidised brass butt hinges. Mimimum 4 nos.
hinges for each of the shutter for Full height
Storage and 3 Nos. hinges for each of the shutter
for Low Height Storage to be provided.
BOLTS - Flush tower bolts from inside at top and
bottom to the shutters and magnetic catch fixed
top and bottom.
LOCKS - of approved make 4 -lever brass body
dead lock with S.S. Key.
HANDLES - 100mm wide handles of C.P brass as
approved by the Architect.
SKIRTING -As instructed by Architect, in plywood
finished in approved 1.0 mm thk laminate or 4.0
mm thk veneer with melamine polish.
BACK - Unexposed back side of storage to have
6mm thk 303 commerical Plywood with polish.
However exposed back of the storage shall be
finished with 1.0 mm thk laminate finish.
TOP - To be finished with 12mm thk Corian top
duly finished.
PRICE BID CIVIL,INTERIOR EL. Page12 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
A Finishing :- All external surface finish with 1.0 mm
thk approved laminate. Exposed top to be finished
in 12mm thk designer Corian and shutters in MDF
board with PU including necessary surface
preparation, finishing the same etc complete. All
exposed surfaces shall have beading patti in
laminate. Inside visible surface complete with
0.8mm thk Laminate. Rate shall also include tw
moulding for the top duly polished wherever
instructed.
105 Sft
C Finishing :- All external surface finish with 4.0 mm
thk approved veneer with polycoat polish.
Exposed top to be finished in 12mm thk designer
Corian and shutters in MDF board with PU
including necessary surface preparation, finishing
the same etc complete. All exposed surfaces shall
have beading patti in laminate. Inside visible
surface complete with 0.8mm thk Laminate. Rate
shall also include tw moulding for the top duly
polished wherever instructed.
32 Sft
D Finishing: - Do - Same specifications & including
all items as mentioned above, but Overhead
storage of 2'-0" height and length as desired for
the server room, UPS room & Pantry to be
finished with approved 1.0mm thk approved
laminate. The top of this storage shall also be
finished with approved 1.0 mm thk laminate.
30 Sft
2 Providing and erecting in position Side Credenza
for the tables, 2'6" height and 18" deep to be
made out of 19mm thk 303 commerical Plywood
. All exposed surfaces shall have beading patti in
laminate / veneer with melamine polish. Rate shall
also include tw moulding for the top duly polished
wherever instructed with 2 nos of drawers on top
and openable shutters below. The openable
shutters to be made out of 19mm thk. 303
commerical Plywood with all internal surfaces to
be finished in 0.8 mm thk approved laminate and
externally with 1.0 mm thk laminate or 4.0mm thk
veneer with melamine or polycoat polish including
brass hinges, ball catches, 100mm brass handles,
brass locks etc complete as per the instruction of
the Architect.
A All exposed surfaces to be finished with approved
veneer, 4 mm externally with polycoat polish as
directed.
Make: Century / Durian / Archid or equivalent
approved make
8.75 Sft
B All exposed surfaces to be finished with approved
1.0 mm thk laminate externally as directed.
Make: Royale touche/Century/Green lam/ Merino
or equivalent approved make
44 Sft
PRICE BID CIVIL,INTERIOR EL. Page13 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
C Finishing :- All external surface finish with 4.0 mm
thk approved veneer with polycoat polish.
Exposed top to be finished in 12mm thk designer
Corian and shutters in MDF board with PU
including necessary surface preparation, finishing
the same etc complete. All exposed surfaces shall
have beading patti in laminate. Inside visible
surface complete with 0.8mm thk Laminate. Rate
shall also include tw moulding for the top duly
polished wherever instructed.
18 Sft
3 Table for B.M (Maximum 6'-6" X 3'-0")
Providing and supplying table for the B.M to be
made out of 19mm thk. IS: 303 Grade commerical
Plywood finished with approved 4.0mm thk high
end veneer with polycoat polish for the top & 4.0
mm thk veneer with melamine polish for all other
exposed areas. The top of the table to have t.w.
moulding all around. The rate shall be inclusive of
providing a keyboard tray on sliding telescopic
channels & a pedestal drawer unit made out of
16mm thk IS: 303 commerical Plywood on side
with 2 nos of equal sized drawers on sliding
channels & openable shutter below. The side
credenza shall be on the other side & shall be
paid for seperately under the relevant item. All
internal surfaces to be finished in approved
0.8mm thk laminate. All the external surfaces
shall be finished with 4.0mm thk approved high
end veneer with melamine polish including the
pedestal drawer unit.
1 Nos
The table shall have 6mm thk clear glass on top
with bevelled edges. The rate shall also include
CPU trolley of reputed manufacturer, keyboard
tray as per the approved makes which shall be
heavy duty. The necessary hardware such as
automatic locking, ball catches, wire managers
etc. to be provided as per the instructions of the
Architect. The Elevation of the table shall be as
directed by Architect on site.
4 OfficersTable (5'-0" X 2'-6")
PRICE BID CIVIL,INTERIOR EL. Page14 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and supplying table for the Senior
Officer / Manager to be made out of 19mm thk
IS:303 Grade commerical Plywood finished with
approved 12mm thk Corian for top including 1.0
mm thk laminate for all other exposed areas. The
top of the table to have corian moulding all
around. The rate shall be inclusive of providing a
keyboard tray on sliding telescopic channels & a
pedestal drawer unit made out of 16mm thk IS :
303 Grade commerical Plywood on side with 2
nos of equal sized drawers on sliding channels &
openable shutter below finished in 1.0 mm thk
laminate. The side credenza shall be on the other
side & shall be paid for seperately under the
relevant item. All internal surfaces to be finished
in approved 0.8mm thk laminate.
5 Nos
All the external surfaces shall be finished with
1.0mm thk approved laminate including the
pedestal drawer unit. The rate shall also include
CPU trolley of reputed manufacturer, keyboard
tray as per the approved makes which shall be
heavy duty. The necessary hardware such as
automatic locking, ball catches, wire managers
etc. to be provided as per the instructions of the
Architect. The Elevation of the table shall be as
directed by Architect on site.
5 Linear Work Stations for Staff
Providing and erecting in position linear work
station of 3'-0" in length and 2'-0" in width as per
the instructions to be made out of 19mm thk. ply
for work top with the top to be finished with 3.0mm
thk approved veneer with melamine polish for the
top surface with front part of it in t.w moluding out
of 1 1/2" X 1 1/2" t.w section to be finished with
veneer and melamine polish & 0.8mm thk
approved laminate for the bottom portion of the
work top to be supported on the adjacent low
height partitions. (The partitions shall be paid for
seperately under the relevant item). The rate shall
be inclusive of necessary fittings, supporting
arrangements to the partitions, heavy duty
keyboard tray of standard make, CPU trolleys of
approved make & a pedestal drawer unit with
castors to be made out of 16mm 303 commerical
Plywood with 3 nos of equal sized drawers on
telescopic channels.
2 Nos
PRICE BID CIVIL,INTERIOR EL. Page15 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
The external exposed surface of the drawer unit
shall be finished with 4.0mm thk approved veneer
with melamine polish. The unit shall have locks,
handles, hinges, channels, necessary fittings,
fixtures, hardware, automatic locking
arrangement, wire managers etc. The internal
surfaces of the drawer unit shall have polish and
the internal surfaces of individual drawers shall be
finished with 0.8mm thk approved laminate
including providing the necessary openings for
electrical/computer wiring complete as per the
instructions of Architect. The rate shall also
include providing stand-alone foot rest to the table
of projection width as directed to be finished with
approved veneer with melamine polish etc
complete for the entire length of the table.
Elevation of the table shall be as directed by
Architect on site.
The unit shall have heavy duty locks, handles,
hinges, channels, necessary fittings, fixtures,
hardware, automatic locking arrangement, wire
managers etc. The internal surfaces of the drawer
unit shall have polish and the internal surfaces of
individual drawers shall be finished with 0.8mm
thk approved laminate including providing the
necessary openings for electrical/computer wiring
complete as per the instructions of Architect.
Elevation of the table shall be as directed by
Architect on site.
6 WORKSTATION FOR SWO's & CASH ( 5'-0" x
2'-9" )
Providing and erecting in position linear work
station of maximum of 5'-0" length and 2'-9" width
as per the instructions and drawings to be made
out of 19mm thk. 303 commerical Plywood for
work top and verticals finished with 1.0mm thk
approved laminate externally for all the exposed
surfaces except the top, which shall be finished
with 12mm thk Corian top including necessary
surface preparation, finishing the same etc
complete & 0.8mm thk approved laminate
internally. The top of the table to have Corian
nosing mould all around. The rate shall be
inclusive of providing a keyboard tray on sliding
channels & a drawer unit on side with 2 nos of
equal sized drawers on channels with internal
seperations in ply for keeping temporary cash &
openable shutter below.
5 Nos
PRICE BID CIVIL,INTERIOR EL. Page16 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
The side credenza however shall be paid for
seperately in the relevant item. The rate shall be
inclusive of CPU trolley of approved make,
necessary fittings, fixtures, hardware such as
channels, hinges, ball catches, automatic locking
arrangament, wire managers etc including
providing the necessary openings for
electrical/computer wiring complete as per the
instructions of Architect. Elevation of the table
shall be as directed by Architect on site.
7 Providing & Errecting in position, bevelled Glass
dividers out of 10mm thk glass between the two
workstations admeasuring approx 2''-3" X 1'-6" to
be placed in position with the D-brackets including
bevelled edging of the glass, etching / frosted film
etc complete
4 Nos
8 Grahak Mitra counter
Providing and supplying Grahak Mitra counter of
size 6'-0" in curvature and 2'-6" height with
chamfer edge glass 12mm thk for top on stainless
steel hollow pipes 75mm dia & height below 1'-0".
The table below the pipe to be made out of 19mm
thk IS:303 grade commerical Plywood with front
apron to have 19mm thk IS:303 grade
commerical Plywood hollow box to be finished
with approved 18mm thk onyx italian marble
including provision of coloured lighting behind the
onyx for glowing effect. The top of the table shall
be provided with approved 12mm thk Corian
including necessary surface preparation, finishing
the same etc complete with a cut out for Monitor
with 12mm thk glass on the top of the table with
pedestal drawer unit with castors comprising of 3
nos of drawers on side to be finished with
approved 3.0mm thk approved veneer with
melamine polish, CPU trolley of standard make
and a shelf for keeping the Monitor below the
glass top with heavy duty keyboard tray on sliding
channels of standard make including s curved in
profile as shown in the layout plan.
1 No
All exposed surfaces of the counter shall be
finished with approved 18mm thk italian marble
except for the top in Corian & drawer unit which
shall be finished with 4.0mm thk veneer with
melamine polish & internal surfaces shall be
finished with 0.8mm thk laminate including
making the necessary openings for wires of
telephone boards, PC, grooves, mouldings, etc
complete.
9 DINING TABLE
PRICE BID CIVIL,INTERIOR EL. Page17 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and supplying 5'-0" rectangular dining
tables made out of 10mm thk Glass top with
design etching pattern with bevelled edges. The
table to have Stainless steel stand of 4" dia. Pipe
in the centre with 4 flange supports in a cross
pattern at top & bottom etc. complete as per
instructions and drawings.
1 No.
10 Computer Counter
Providing and erecting computer counter (2'-3")
wide to made out of 19mm thk. 303 commerical
Plywood . The counter to have lockable heavy
duty keyboard trays with a pedestal drawer unit
with 3 nos of equal sized drawers at regular
intervals as per the plan in 19mm thk. IS: 303
commerical Plywood with necessary opening for
electrical wiring & sockets. The counter shall be
finished with approved 1.0mm thk laminate for all
the external exposed areas and polish internally
etc complete as per design & instructions. The
rate shall be inclusive of CPU trolleys, foot rest,
wire manager, provision for electrical sockets etc
complete.
5 Rft.
11 Corner Table ( 2'-0" x 2'-0" )
Providing and supplying in position corner table to
be made out of 2" x 2" t.w. frame with 12mm thk.
clear glass top with bevelled edges and etching
with melamine polish etc. complete.
1 No.
12 Center Table (3'-0" X 2'-0" Oval / Rectangular)
Providing and supplying in position oval center
table to be made out of 2" x 2" t.w. frame with
12mm thk. clear glass top with bevelled edges
and etching with melamine polish etc. complete
as instructed by Architect.
1 No.
13 WRITING DESK
Writing desk at entrance area in 19mm 303
comm. Ply and 1mm laminate finish surface 12
mm clear glass on top with shelves/partation in
glass to keep sleep books including acid etching /
frosting of approved design and exposed edges in
machine polished.and bank’s printed broachers
for public complete as per Architect’s design and
instructions. Size: 3’-0” x 1’-6” x 1 no.
1 No.
14 Planter Boxes (18" Dia)
Providing and supplying 14" dia planter boxes to
be made out of 19mm thk. 303 commercial ply to
be with approved veneer,4mm thk externally &
painted from inside including G.I. Tray for the
base as per the drawing and instructions of the
Architect etc. complete.
5 Nos.
PRICE BID CIVIL,INTERIOR EL. Page18 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
15 Artificial Plants
A Providing and supplying artificial plants approved
by Architect such as moss and including
necessary stand for holding the plants as per the
approved sample.
5 Nos.
B Same as above but medium size 8 Nos.
16 Trap Door
Providing and erecting in position trap door in
12mm thk 303 commerical Plywood to house,
A.C. ductable units to be made out of 2" x 11/2"
t.w. frame with openable shutter in ply with
necessary hinges, tower bolts, locks, painting etc.
finished as per the instructions and design.
30 Sft
17 Sun Control film
Providing and fixing designer etching frosted film
of approved make and shade (3M, Llumar or
approved equivalent make by the Bank) to the
glass complete as instructed by Architect
130 Sft.
18 PELMETS:
Providing and fixing 5" wide Pelmet with 18mm
thk IS:303 commerical Plywood including t.w
lippings on all edges of the plywood and finished
on both sides etc complete as per the
instructions.
Finished in 1.0mm thk approved laminate on both
sides100 Sft
Finished in 4.0mm thk approved veneer with
melamine polish on both sides60 Sft
19 Collapsible Gate
Providing and fixing in position collapsible steel
shutters with vertical channels 20x10x2mm and
braced with flat iron diagonals 20x5mm size, with
top and bottom rail of T-iron 40x40x6mm, with
40mm dia steel pulleys, complete with bolts, nuts,
locking arrangement, stoppers, handles, including
applying a priming coat of approved steel primer
and 2 or more coates of approved synthetic
enamel paint of approve shade and make to give
and even shade.
90 Sft
20 NOTICE BOARD:
Providing and Supplying Notice Boards 8 cm
deep made out of BTC T.W framing 8cm X 24mm
with 12mm thick Soft Board covered with cloth felt
on 6mm IS:303 Commerical grade Ply back and
glass shutters openable on pivot hinges complete
with lock and handle. Size-1.20 m X 60 cm
complete as per the drawings, details &
instructions of Architect.
1 Nos
21 WHITE BOARD WITH CERAMIC COATING:
PRICE BID CIVIL,INTERIOR EL. Page19 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and fixing White board(magnetic) with
ceramic coating including soft board with fabric of
approved shade and design complete as per the
drawing & specification given by Architect .
20 Sft
22 PATTA & BANDS:
Providing and fixing 75mm wide Patta on the wall
with 12mm thk IS:303 Grade commerical
Plywood including 12 mm t.w beading with
polishing etc complete as per the instructions.
aFinished in 4.0mm thk approved Veneer with
melamine polish30 Sft
b Finished in 1.0mm thk approved laminate. 40 Sft
cFinished in 4mm thk MDF with melamine polish /
acryllic emulsion paint 80 Sft
23 KEY HIVE:
Providing & Fixing Key hive of size 600 X 900mm
made out of 12mm thk IS:303 grade commerical
Plywood backing with openable type shutter to be
made out of 19 X 75mm outer frame with 6mm thk
glass. All exposed surfaces to be finished with
1.0mm thk approved laminate and all internal
surfaces to be finished with 0.8mm thk approved
laminate including 75mm handle, 2 nos of 75mm
hinges for the shutter, locks etc complete as per
the drawing.
1 Nos
SUM TOTAL OF SCHEDULES - FURNITURE
WORKS
C SCHEDULE - CIVIL WORKS
1 Demolition / dismantaling
A Demolishing brick work manually/ by
mechanical means on Ground floor level and all
floors up to 6th floor including stacking of
serviceable material and disposal of
unserviceable material within 50 metres lead.
Including carting away the unserviceable material
to dumping ground Location as approved by
Municipal Corporation of Navi Mumbai
immediately at intervals
Cu.ft. 120
B Demolishing R.C.C. work,flooring, precast
concrete jalli manually/ by mechanical means
on Ground floor level and all floors up to 6th floor;
including stacking of steel bars and disposal of
unserviceable material within 50 metres lead.
Including carting away the unserviceable material
to dumping ground Location as approved by
Municipal Corporation of Greater Mumbai
immediately at intervals
Cu.ft. 160
PRICE BID CIVIL,INTERIOR EL. Page20 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
C Demolishing/dismantaling loose furniture,
false ceiling, electrical fixture etc. of all type of
existing , partitions, false ceiling, loose
equipments, doors, windows & fixed glazing,
fans, lighting fixtures, electrical assessories of all
types, gadgets, cables & wires, AC ducts & grills,
All type of AC assessories, Fire pipes, Sprinklers,
All other type of Electrical Assessories, table &
credenzas, storage units of all types, all types of
furniture & fixtures, workstations, Interior items,
fixed & loose items, as per directions etc and any
other material required for working on site &
compliance of all the activities on site
L.S
The quoted amount shall also include the removal
of debris from site on day to day basis including
removing the same with utmost care to ensure no
damage in case of reusable fixtures, fittings,
assessories & materials of all types including
handing over the same to the State Bank or
shifting the same to a new desired place and re-
fixing the same if desired under the instructions
and directions of the Consultant or Bank's
Engineer-in-charge.
2 PAINTING :
Note : The Rates for the Painting works shall be
inclusive of three coats. The paint should be free
from lead and Arsenic.
A Painting of wall with minimum of 3 coats of Flat
Oil Paint of approved shade & make on the wall,
plywood or gypboard including all necessary
surfaces preparation. The wall shall be cleaned,
filled with putty & applied with one coat of primer
so as to achieve a even surface to apply paint. As
per the directions / to the satisfaction of the
Architect / Engineer in charge.
Make: Asian/Nerolac/ Berger/Dulex.
100 Sft
B Providing and applying acrylic aggregate textured
wall coating in oikos pigmented Ornaplast finish in
any shade spray coat bubble or compact or rustik
shade, maintaining material consumption rate of
average 2.25 Kg. Per sq.mt. and 1.5mm thickness
on walls. The rate shall include POP punning to
the wall up to average thickness of 12 mm to
proper level & plumb, including grooves etc,
scrapping, base coats etc, cleaning of the walls
etc complete.
Make:Sandtex Matt/ Dulux/Berger.
80 Sft
PRICE BID CIVIL,INTERIOR EL. Page21 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
C Providing and applying Acrylic Emulsion Paint in
minimum of three coats of approved make and
shade on Walls, Ceiling, plywood, gypsum board,
surfaces etc including all the necessary surfaces
preparation, POP punning to the wall up to
average thickness of 12 mm to proper level &
plumb, including grooves etc scrapping, base
coats etc to receive 3 coats of paint. The wall
shall be cleaned, filled with putty & applied with
one coat of primer so as to achieve a even
surface to apply paint. As per the directions / to
the satisfaction of the Architect.
Make: Asian/Nerolac/ Berger/Dulex
3500 Sft
3 FLOORING :
a Providing and laying 9mm thk Mirror finish super-
premium range, digital and high gloss Vitrified
Tiles of approved makes of size 600 x 600 x
9mm thk (Min) laid in required pattern on an avg.
25 to 30mm thk. bed of 1:4 cement mortar (1
cement : 4 coarse sand) including inlay design
work in 18mm thk Granite stone and contrast dark
coloured Vitrified tiles approved by the Architects
and approved design in proper line and level
including neat white cement float, filling joints with
neat cement slurry, of appropriate colour, curing
and cleaning complete.Tiles shall be free of any
variation in colour or texture, and laying plastic
sheet & 18mm thk. POP protective cover on
flooring and removing when directed.
The cost to include sealer treatment of approved
brand. The rate shall be inclusive of application
chemicals and Roffe and levelling with min 3"
PCC wherever level difference is observed to
attain a uniform level all throughout the premises.
The rate shall also include providing and fixing
heavy duty brass patti of desired length, width for
the areas of the inlay works etc complete as
directed by the Architects.
Make: Kajaria/ Somany / H.R.Johnson/ Nitco /
Simpolo
2471 Sft
b Providing and laying Laminated Wooden flooring
of approved make on floor in a design
combination of two different colours as per the
drawing & instructions on levelled floor including
levelling the surface of application area with
P.C.C, insulating the areas, surface preparation,
bedding, finishing, polishing, cleaning including
skirting patti as per manufacturers specifications,
moulding etc complete as per the directions and
instructions of the Consultant. The rate shall be
inclusive of edge moulding & end strips at the
junction between the floor and the vertical
surfaces and mouldings, T grooves etc complete.
(Basic rate of tiles = Rs. 180 / Sq Fts.)
Make: Pergo/Tiles/ Xylos/Armstrong/Vista.
170 Sft
PRICE BID CIVIL,INTERIOR EL. Page22 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
c Providing and laying wall tiles toilet premium
quality textured design digital series ceramic tiles
of approved size such as 12" X 18" or 12" X 24"
etc or appropriate size matching the floor grooves
of approved make and shade in dado in
combination with black granite skirting, blach
granite patta as wash basin level and at 7'-0" level
including designer tiles in combination in a
required pattern and design including Cement
Mortar 1:4 ( 1 Cement : 4 Coarse sand ) in proper
line and level including neat white cement float,
filling joints with neat cement slurry, of appropriate
colour, curing and cleaning complete.Tiles shall
be free of any variation in colour or texture. (Basic
Rate of Tile shall be Rs. 80/- S.Ft)
210 Sft
e Providing and laying flooring tiles toilet premium
quality textured design digital series ceramic tiles
of approved size such as 12" X 12" or 24" X 24"
etc or appropriate size matching the grooves of
wall tiles of approved make and shade laid in
required pattern on an avg. 25 to 30mm thk. bed
of 1:4 cement mortar (1 cement : 4 coarse sand)
in proper line and level including neat white
cement float, filling joints with neat cement slurry,
of appropriate colour, curing and cleaning
complete.Tiles shall be free of any variation in
colour or textureetc complete. (Basic Rate of Tile
shall be Rs. 80/- S.Ft)
42 Sft
f Providing and fixing approved Mirror polished
approved Granite slab flooring (Raw Silk Granite /
Lakha Red Granite) with inlay work in jet black
granite wherever instructed for treads, risers,
landings, toilet floors, pantry, bunds, entrance
areas, waiting lounge, cills, urinal partitions,
counters of any type, jambs, strips & frames of
18mm thk. and size upto 8' x 6' as shown over
and including avg. 25 to 30mm thk. 1:4 (1 cement
: 4 coarse sand) bedding in proper line & level
including the joints to be finished flushed in
matching colour cement, curing, washing,
cleaning and rate to include for chipping and
levelling existing floor and laying plastic sheet &
18mm thk. POP protective cover on flooring and
removing when directed as req., including
moulding and 1/8" grooves complete as per
drawings & details, and as directed. Basic rate of
Granite shall be With rate dubble patti Rs. 200 /
sq fts.
90 Sft.
4 Pantry Counter
PRICE BID CIVIL,INTERIOR EL. Page23 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and erecting pantry counter 2'-0" wide
in kadappa undercarriage of 11/2" thk. one side
polished and top to be in 20mm thk Raw silk
granite of the desired shape & size. The counter
to be supported with sandwitch cadappa verticals.
The granite facia 4" & 6" to be fixed to verticals
and top with edge polish and cutting for sink etc.
complete as per instructions of the Architect
including required nos of S.S service trolleys
below with sliding standard sections as per
manufacturers specifications, S.S Sink of nirali
make of size 24" X 17"X 8" and necessary piping,
plumbing fittings, fixtures of jaguar make etc
complete.
6 Rft
4 Providing and Fixing Synthetic Door matting
system from LG or Nomad as per manufacturers
specifications to match the finished floor level in
the adjoining areas
20 Sft
4 Providing and placing ready made SS'dust bins'
of diameter not less than 300 mm made out of
perforated SS sheet with edges rounded, the
base shall be of SS plate of thickness not less
than 2.00 mm
9 Nos
5
ALUMINIUM COMPOSITE PANELS &
STRUCTURAL GLAZING CLADDING ON
EXTERNAL FRONTAGE WALLS
Supplying and errecting in position combination of
Exterior Grade Aluminium Composite Panels and
Structural coloured Glass of approved make
including 4 mm thick comprising of polyethylene
core between two skins of Aluminium with exterior
surface coated with DVDF resins as per ASTM or
BS standards including Aluminium wall brackets.
Aluminium runners horizontal and vertical as per
the Manufacturers standard errection including
filling of the gaps etc finish. Detailed technical
annexure of manufacturer will be approved by the
Architects.
200 Sft
6 MISCELLANOUS CIVIL WORK
A Plumbing work
PRICE BID CIVIL,INTERIOR EL. Page24 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and fixing in position internal and
external damaged Sanitary and Water supply
pipelines to be PVC and / or c-PVC concealed in
wall / floor with bitumen treatment and covered
with hessain cloth. All joints to be water tight and
properly sealed. Drainage pipes shall be heavy
duty ISI marked including all necessary high
quality fitting such as bends, tees, flanges,
elbows, coupling, reducer, unions, checknuts etc.
joining with taflon tapes, excavation, refilling,
consolidating where ever required. Note: - since
all the pipelines are already covered under the
respective items of WC's and Wash basins, the
said item shall be operated and items quntified
only as per the directions of the Architect or Client
and whenever any additional pipelines are
required to be laid within the toilets or any other
area, within the premises and on the floor.
L.S
B Sanitary Ware
Providig and fixing of white coloured sanitaryware
of approved make and shape.
I Wall mounted EWC (36X34.5X54.5cms) including
its complete set of assessories such as flushing
cistern - flush tank, water jet arrangement,
telephone jet arrangement for WC, M.S.chair -
PVC seat cover, bends, other assessories,
fittings, fixtures etc complete. The rate shall also
be inclusive of concealed flush tank or with
provision for flush valve including necessary
supply line from external point source upto the
flush valve / flush tank, water jet and telephone jet
etc complete as per approved makes.
2 Nos.
C Sanitary Fittings & Fixtures
Providing and fixing CP sanitary fittings of Jaquar
make as follows.
I Angle Cock 3 No.
ii Stop Cock 4 No.
iii Bib Cock 2 No.
iv Soap Holder 4 No.
v Towel Rod 3 No.
vi Coat Hooks 2 No.
vii Nahani Trap jali 3 No.
viii Pillar cock 3 No.
ix CP brass Liquid Soap containers of Askon or
equivalent make 3 No.
xi Mirror panelling on ply 2 X 2 3 No.
xii Frames for Exhaust Fans in t.w frame 2" X 11/2"
incl painting3 No.
PRICE BID CIVIL,INTERIOR EL. Page25 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
xiii Providing & fixing Oval shaped over mounted
wash basin over granite counter (Granite counter
shall be paid seperately under relevant item) with
moulding below the basin including heavy duty
bottle trap, waste coupling, pillar cock, stop cock
and necessary fittings and fixtures etc. complete
in all respects as per manufacturers
specifications, standard fittings & fixtures etc
complete.
2 No.
SUM TOTAL OF SCHEDULES - CIVIL WORKS
S.N. PARTICULARS QTY UNIT RATE AMOUNT
A MAIN LT PANEL / DB'S
1
Supply, installation, testing & commissioning of
125A IC TPN SFU with 125A HRC fuses (L&T /
EE make) 440 V 3 phase & neutral 50 c/s AC23
duty on MS angle iron frame fabricated out of
40 mm. x 40 mm. x 5 mm MS angle duly painted
with cable end boxes, earthing, name plate
danger board fixing accessories etc.
1 Set
2 MAIN ELECTRICAL LT PANEL - Supply and
Installation of main LT panel, floor mounted, front
operated, dead back, totally enclosed vermin
proof, indoor, non-drawout, cubicle type power
dist. panel fabricated out of 2mm thick CRCA
sheet having gasketed hinged door on each
cubicle, fully powder coated / enamel painted after
seven tank treatment, incorporating horizontal and
vertical sleeved copper / aluminium busbars
'complete with all internal wiring, danger board,
two earthing lugs, cable chamber etc. as required
'housing below mentioned switchgears / meters.
Note :- GA & Control Drawing of the panel
shall be approved by the Client / Consultant
before fabrication. (Panel shall be
manufactured from CPRI approved
manufacturer only.) All test certificates for
Panel shall be submitted alongwith the
delivery of Panel at site.
2.1 (MAIN LT PANEL)
INCOMER:
1 no., 125A, (36kA) 415V 50Hz FP MCCB
complete with neutral & accessories as incomer
with O/L, S/C protections
1 no. 4P Voltage Surge Protector / Arrestor
including LED indicators alongwith necessary
accessories.
OUTGOINGS:
1 Nos.,100A,TPN, MCCB as outgoing complete
with neutral & accessories (MAIN AC DB)
INDICATIVE PRICE FOR ELECTRICAL & ALLIED WORKS
PRICE BID CIVIL,INTERIOR EL. Page26 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
5 Nos., 63/40A,TPN, MCB as outgoing complete
with neutral & accessories. (For UPS I/P - 1
no.s, LDB - 1 no.s, RPDB- 1 no.s, ATM - 1 no.s,
Spare - 2 no.s)
3 Nos., 40/32A,DP, MCB as outgoing complete
with neutral & accessories (For Signage - 1 no.s,
Spare - 2 no.s)
BUSBAR:
1 Set of 200A TPN tinned Copper busbar with
PVC sleeving & accessories
INDICATORS:
1 Set, RYB, indicating lamps with resistors and
fuses
METERING:
Load Manager with RS 485 port indicating Pf,
KW, KVA, KVAr with class A CT- 1 no
2.2
INBUILT APFC PANEL - With inbuilt solid state
automatic power factor correction arrangement
having microprocessor based control circuit and
thyristor switching power circuit having a required
capacity of 30KVAR having capacitor bank in
steps of [(1 x 10 KVAR) + (3 x 5 KVAR)+ (1 x 3
KVAR) + (1 x 2 KVAR)], including main MCCB,
MCB's, APFC relay, contactors, capacitors,
indicating lamps, etc. complete with all necessary
hardware & accessories as mentioned below :-
a INCOMER
1 No. 80A, FP, 36kA, MCCB with Thermal
Magnetic release, of approved make with built in
over load (O/L), short circuit (S/C) protection. The
Breaker shall be suitable for 415 Volts 50 Hz., AC
supply. The breaker shall have breaking capacity
of 25 KA for 1 Sec. (For APFC Panel Main
Incomer - 1 no.)
b BUSBARS
1 Set of 150 Amps uniformly rated, continuous
duty, 415V AC, 3-Phase & Neutral electrolytic
grade 99.95% Purity Tinned Copper bus-bars with
colour coded heat sink sleeves supported on
SMC type grip supports. The Horizontal / Vertical
sections of the busbars should all be uniformly
rated for 150 Amps.
1 Set of 25 x 5 mm copper busbars of high
conductivity electrolytic quality shall be provided
throught out the panel for its earthing.
c INSTRUMENTS
1 no. 0-500V Digital Voltmeter of suitable size & 1
no. suitable size Digital Ammeter
1 Set of phase indicating lamps, LED type, RYB.
1 Set of 2A 10kA C curve SP control MCB
1 no. 6 stage microprocessor based digital type
APFC relay
1 set overvoltage, undervoltage, phase protection
relay.PRICE BID CIVIL,INTERIOR EL. Page27 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
6 set On, Off push button, auto manual selector
switch.
6 set On, Off LED type indication lamp
d OUTGOING
1 Nos. 63A, TPN, D curve, MCB
3 Nos. 32/40A, TPN, D curve, MCB
2 Nos. 25A, TPN, D curve, MCB
1 No. 2 kVAR MPP heavy duty capacitor with
capacitor duty contactor & 7% detuned harmonic
filter.
1 No. 3 kVAR MPP heavy duty capacitor with
capacitor duty contactor & 7% detuned harmonic
filter.
3 No. 5 kVAR MPP heavy duty capacitor with
capacitor duty contactor & 7% detuned harmonic
filter.
1 Nos. 10 kVAR MPP heavy duty capacitor with
capacitor duty contactor & 7% detuned harmonic
filter.
The panel shall be provided with required nos of
louvers in the capacitor chamber for its cooling.
Also required nos of ventillation fans with auto
sensing thermostat shall be provided in the panel.
The switching of capacitors shall take place at
zero crossing level to reduce harmonics and
improve capacitor life.
Full Set as above 1 NOS
3
Suply and installation of 4-way, VTPN, Double
door, (MCCB DB) Emergency Main Power
Distribution Board (EMG MPDB), having vertical
fishbone busbar type, factory
a INCOMER
1 No. 100A, FP, 36kA / 25kA, MCCB with
Thermal Magnetic release, of approved make with
over load (O/L), short circuit (S/C) & Earth Fault
(E/F) protection. The Breaker shall
b OUTGOINT
4 Nos., 63/40A, TP, MCB, "C" curve type as
outgoings (3P AC M/C-no,s-1, AC M/C- no,s-2,
AC M/C-no,s-3, 4W TPN ACDB)
Full Set as above 1 Nos
4 Suply and installation of 4-way, PPI TPN, Double
Door, Metal type, with Plain / Transperant Door
(As approved by client / consultant / architect),
Lighting Distribution Board (LDB), surface / flush
mounted on wall, interconnected wiring complete
with earthing lugs, including DB wiring dressing
with ferruling, termination of circuits with ping type
copper lugs, blank plates, etc. housing following
switchgears : (Schneider / Hager / Siemens /
Legrand make as approved by client / consultant)
PRICE BID CIVIL,INTERIOR EL. Page28 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
(Note :- DB size & type selection shall be done
with reference to the total number of modules
/ poles available in the DB which shall be
suitable for housing of below mentioned
switchgears & components forming a
complete set.)
a
1 no.,40A, FP MCB, "C" curve type as incomer
with 230V AC, 1M x 3 no.s overvoltage release
protection module.
3 no.s, 32A, DP RCBO with sensitivity of 100mA,
as sub-incomer.
b
9 nos, 10/16A, SP, MCB, "C" curve type as
outgoings + 3 no.s 1M-RYB indicators / lamps
each.
Full Set as above - (For Item No.A-5) 1 Nos
5 Suply and installation of 6-way, TPN, Raw Power
Distribution Board (RPDB), flush mounted on wall,
interconnected wiring complete with earthing lugs
housing following switchgears:
(Similar to MDS / equivalent approved make)
a 1 no., 63A, TP MCB as incomer
b 18 nos, 16/25A, SP, MCB outgoing
Full Set as above 1 Nos
6 Suply and installation of 4-way, TPN, AC
Distribution Board (ACDB), flush mounted on wall,
interconnected wiring complete with earthing lugs
housing following switchgears:
(Similar to MDS / equivalent approved make)
a 1 no., 63A, TP MCB+ELCB as incomer
b 12 nos, 20/25A, SP, MCB outgoing
Full Set as above 1 Nos
7 Suply and installation of 8-way, SPN, Main UPS /
RAW Power Distribution Board ( MAIN UPSDB),
flush mounted on wall, interconnected wiring
complete with earthing lugs housing following
switchgears:
(Similar to MDS / equivalent approved make)
a 1 no., 40/63A, DP MCB as incomer
b2 no.s 63/40A DP MCB's + 2 nos, 16/20A, SP,
MCB's, "D" curve type as outgoings
Full Set as above 1 Nos
8 Suply and installation of 8-way, SPN, Main UPS /
RAW Power Distribution Board (server room
UPSDB), flush mounted on wall, interconnected
wiring complete with earthing lugs housing
following switchgears:
(Similar to MDS / equivalent approved make)
a 1 no., 40/63A, DP MCB as incomer
b 6 nos, 16/25A, SP, MCB outgoing
Full Set as above 1 Nos
9 Suply and installation of 12-way, SPN, UPS
Power Distribution Board (workstation UPSDB),
flush mounted on wall, interconnected wiring
complete with earthing lugs housing following
switchgears:
(Similar to MDS / equivalent approved make) PRICE BID CIVIL,INTERIOR EL. Page29 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
a 1 no., 40/63A, DP MCB as incomer
b 10 nos, 16/25A, SP, MCB outgoing
Full Set as above 1 Nos
10 Supply & Installation of 20A, SP, MCB, box with
20A, metal clad / modular plug-socket including
power circuit of (2x4 + 1x2.5) sq. mm wires
directly taken from the relevant DB through PVC
conduits for room A/C including all necessary
hardware & accessories, etc.
8 Nos
11 Supply & Installation of 20/32A, DP, MCB, box
with 20A, metal clad plug-socket including power
circuit of (2x4 + 1x4) sq. mm FRLS copper flexible
wires directly taken from the relevant DB through
PVC conduits for termination of strong room main
electrical power supply into 20A metal clad plug
socket mounted / installed outside near strong
room entrance door alongwith 3C x 4 Sq.mm Cu.
flexible cable laid through flexible metal conduit
for connection into the strong room main switch
board / DB including all necessary hardware &
accessories, etc. (Schneider / Hager / Legrand /
Siemens / L&T make)
1 Nos
12 Supply & Installation of 20A, timer switch with 2
no.s of 20A DP MCB's alongwith suitable size
enclosure box for switching for A.C.'s, etc.
alongwith 2NO 63A 1M contactor in the same
enclosure box for controlling 2 no.s of AC power
circuit through Timer including power circuits of
(2x4 + 1x4) sq. mm FRLS copper flexible wires
directly taken from the relevant DB through PVC
conduits for room A/C's through timer & contactor
including all necessary hardware & accessories,
etc. complete as required. (Schneider / Hager /
Legrand / Siemens / L&T make)
2 Nos
13 Supply & Installation of 20A, timer switch for
signage, etc. including power circuit wiring of
(2x4 + 1x2.5 Sq.mm) wires laid through PVC
conduit directly taken from Panel
1 Nos
14 Supply & Installation of 63/40A, TPN, MCB with
box for terminating supply to AHU's, Pump
machines, etc. as required.
1 Nos
15 Supply & Installation of 63A, TPN MCB with
RYB Indicator Lamps with Enclosure for
terminating supply to UPS i/p - o/p alongwith all
necessary hardware & accessories, etc. complete
as required. (Schneider / Hager / Legrand /
Siemens / L&T make)
1 Nos
16 Supply & Installation of 63/40A, DP, MCB with box
for terminating supply to UPS i/p - o/p etc. as
required.
1 Nos
PRICE BID CIVIL,INTERIOR EL. Page30 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
17 Lumpsum charges for arranging temporary power
supply and lighting for all the contractor at site
including the required number of tubelight fittings,
suffficient number of plug points with plug tops
and including all the necessary safety devices like
ELCB etc. to ensure SAFE & CONTINUED supply
at site.
LS
TOTAL of SECTION (A) Rs.
B CABLES / MAINS
1
Supply & Installation of 1100V grade armoured
cable having sector / circular shaped aluminium /
copper conductor PVC insulated cores, laid up,
PVC tape wrappe d inner sheathed, GI strip / wire
armoured and overall extruded PVC sheathed
confirming to IS: 1554, laid on wall / ceiling using
GI clamps & spacers as per route shown at site
and further as directed by Consultant at site in the
following sizes :-
NOTE :- All Armoured cables shall be provided
with temporary labelling at every 5mtrs & then
finally with metal indentification tags showing
the size & the location from/to the respective
Panel / DB, at both the ends.
1.13 1/2 C x 120 Sq.mm Aluminium (Main cable from
Meter Room to SFU at meter room)25 Mtrs
1.23 1/2 C x 95 Sq.mm Aluminium (Main cable from
SFU to Main Electrical LT Panel)50 Mtrs
1.33 1/2 C x 50 Sq.mm Aluminium (Main Electrical
LT Panel to Main HVAC VTPN DB)20 Mtrs
1.4 4C x 16 Sq.mm Copper 20 Mtrs
1.5 4C x 10 Sq.mm Copper 40 Mtrs
1.6 4C x 6 Sq.mm Copper 30 Mtrs
1.7 2C x 16 Sq.mm Copper 18 Mtrs
1.8 2C x 10 Sq.mm Copper 5 Mtrs
1.9 3C x 2.5 Sq.mm Copper 10 Mtrs
### 3C x 1.5 Sq.mm Copper 5 Mtrs
###25 Sq.mm Copper flexible lead wire through
flexible PVC conduit10
Mtrs
###16 Sq.mm Copper flexible lead wire through
flexible PVC conduit40
Mtrs
###10 Sq.mm Copper flexible lead wire through
flexible PVC conduit10 Mtrs
2
Supply & Installation of end termination of above
mentioned cables including compressed type
brass glands, crimping type copper lugs,
insulation tape etc. as 'required complete with
earthing of glands in following sizes
2.13 1/2 C x 120 Sq.mm Aluminium (Main cable from
Meter Room to SFU at meter room)2 Nos
2.23 1/2 C x 95 Sq.mm Aluminium (Main cable from
SFU to Main Electrical LT Panel)2 Nos
2.33 1/2 C x 50 Sq.mm Aluminium (Main Electrical
LT Panel to Main HVAC VTPN DB)2 Nos
2.4 4C x 16 Sq.mm Copper 4 NosPRICE BID CIVIL,INTERIOR EL. Page31 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
2.5 4C x 10 Sq.mm Copper 6 Nos
2.6 4C x 6 Sq.mm Copper 2 Nos
2.7 2C x 16 Sq.mm Copper 2 Nos
2.8 2C x 10 Sq.mm Copper 2 Nos
2.9 3C x 2.5 Sq.mm Copper 2 Nos
### 3C x 1.5 Sq.mm Copper 2 Nos
###25 Sq.mm Copper flexible lead wire through
flexible PVC conduit2
Nos
###16 Sq.mm Copper flexible lead wire through
flexible PVC conduit6
Nos
###10 Sq.mm Copper flexible lead wire through
flexible PVC conduit2
Nos
TOTAL of SECTION (B) Rs.
CLIGHTING & POWER WIRING WITH FRLS
WIRES
1
Supply & Installation of concealed point wiring
using 600v grade 1.5 sqmm copper conductor
PVC insulated wires (with proper R,Y,B color
code ) pulled through heavy gauge PVC conduits
laid concealed over false ceiling or in wall chases
or on the ceiling in case of an open ceiling
including 2.5 sqmm circuit wires from the relevant
DB and also including 2.5 sqmm green color
copper earth wire and switch plate, switches, etc.
as approved by the consultant. (Each circuit shall
not feed more than 8 points OR 800 watts as per
following configuration.)
1.1Primary light points including the cost of 5A switch
55 Nos
1.2Secondary light points looped from the above
point45 Nos
1.3
Fan Point including 120W Electronic type step
regulator, anchor fastner & 'S' type fan hook in
ceiling to suspend ceiling fan by cutting / chiesling
/ painting as required
3 Nos
1.45A plug point as primary point (UPS / RAW
Power)8 Nos
1.5Secondary 5A Plug point on switch board (UPS /
RAW Power)25 Nos
1.6Exhaust fan point consisting of 5A socket near fan
and switch on light switch board3 Nos
2
Supply & installation of 5/15A Plug Point directly
taken from DB for Pantry / geyser / zerox / printer /
fridge, etc. including 2 x 2.5 sqmm circuit wires
directly taken from the relevant DB and also
including 2.5 sqmm green color copper earth wire
all laid through PVC conduit with all necessary
hardware& accessories, etc. (UPS/Raw
PowerONLY FOUR tables served by one circiut
from DB))
10 Nos
PRICE BID CIVIL,INTERIOR EL. Page32 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
3
Supply & Installation of point wiring for UPS or
stabilized power plug points on workstations /
table for computers using 3C X2.5 Sqmm copper
conductor PVC sheathed white color flexible
cable pulled through already laid floor raceways
and taken upto table top using PVC rigid or
flexible conduits run within wooden/metal
partitions. Each point consisting of 4 nos of 5A
, 2/3 pin sockets & 1 No., 15A Switch , wired
together forming one point. The earth wire of 3
core flexible cable to be of yellow-green color
only. (ONLY FOUR tables served by one
circiut from DB)
6 Nos
4
Supply & Installation of point wiring for UPS or
stabilized power plug points on workstations /
table for computers using 3C X2.5 Sqmm copper
conductor PVC sheathed white color flexible
cable pulled through already laid floor raceways
and taken upto table top using PVC rigid or
flexible conduits run within wooden/metal
partitions. Each point consisting of 3 nos of 5A
, 2/3 pin sockets & 1 No., 15A Switch , wired
together forming one point. The earth wire of 3
core flexible cable to be of yellow-green color
only. (ONLY FOUR tables served by one
circiut from DB)
11 Nos
5
Supply & Installation of point wiring for UPS or
stabilized power plug points on workstations /
table for computers using 3C X2.5 Sqmm copper
conductor PVC sheathed white color flexible
cable pulled through already laid floor raceways
and taken upto table top using PVC rigid or
flexible conduits run within wooden/metal
partitions. Each point consisting of 2 nos of 5A
, 2/3 pin sockets & 1 No., 15A Switch , wired
together forming one point. The earth wire of 3
core flexible cable to be of yellow-green color
only. (ONLY FOUR tables served by one
circiut from DB)
3 Nos
6Supply & installation of T.V. outlet point including
all necessary hardware, accessories, etc.1 Nos
7
Supply & laying of RG-6 TV cable through heavy
guage PVC conduit including all necessary
hardware, accessories, etc.
55 Rmt
TOTAL of SECTION (C) Rs.
D TRENCHING / FLOOR -RACEWAYS:
1
Supply and installation of extruded aluminium
raceway of 1.6 mm minimum thickness and
complete with all clamping or Fixing accessories
& Interconnecting earthing strip / wire for earthing
continuity complete with all necessary hardware &
accessories, etc.
1.1 100 mm X 40 mm 8 Mtrs
1.2 80 mm X 40 mm 8 MtrsPRICE BID CIVIL,INTERIOR EL. Page33 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
1.3 60 mm X 40 mm 52 Mtrs
2Supply & Installation of 32mm heavy guage PVC
conduit (FRLS)150 Mtrs
3Supply & Installation of 25mm heavy guage PVC
conduit (FRLS)120 Mtrs
4
Supply & Installation of floor junction boxes with
top cover for above raceways, of size 250mm x
250mm x 50mm x 2.5mm thick , fabricated out
of M.S. sheetsfully powder coated with removable
screwed cover plates on all four sides for blocking
the entry. One side cover plate having 4 nos. 1'
dia knockouts for flexible conduit outlets as per
the requirement. All the junction boxes to be (with
stud) 'properly earth - bonded with the raceways
pipe using 12 SWG Copper bare wire as directed
at site.
10 Nos
5
Supply & Installation of floor junction boxes with
top cover for above raceways, of size 300mm x
300mm x 50mm x 2.5mm thick , fabricated out
of M.S. sheetsfully powder coated with removable
screwed cover plates on all four sides for blocking
the entry. One side cover plate having 4 nos. 1'
dia knockouts for flexible conduit outlets as per
the requirement. All the junction boxes to be (with
stud) 'properly earth - bonded with the raceways
pipe using 12 SWG Copper bare wire as directed
at site.
4 Nos
6
Supply & Installation of floor junction boxes with
top cover for above raceways, of size 350mm x
350mm x 50mm x 2.5mm thick , fabricated out
of M.S. sheetsfully powder coated with removable
screwed cover plates on all four sides for blocking
the entry. One side cover plate having 4 nos. 1'
dia knockouts for flexible conduit outlets as per
the requirement. All the junction boxes to be (with
stud) 'properly earth - bonded with the raceways
pipe using 12 SWG Copper bare wire as directed
at site.
1 Nos
7
Supply & Installation of floor junction boxes with
top cover for above raceways, of size 400mm x
400mm x 50mm x 2.5mm thick , fabricated out
of M.S. sheetsfully powder coated with removable
screwed cover plates on all four sides for blocking
the entry. One side cover plate having 4 nos. 1'
dia knockouts for flexible conduit outlets as per
the requirement. All the junction boxes to be (with
stud) 'properly earth - bonded with the raceways
pipe using 12 SWG Copper bare wire as directed
at site.
1 Nos
8
Chesling of flooring including tile cutting &
recementing the flooring surface uniformly for
underfloor trenching as per required sizes along
with necessary hardware & acessories, etc.
100 Mtrs
TOTAL of SECTION (D) Rs.
PRICE BID CIVIL,INTERIOR EL. Page34 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
E EARTHING
1
Supply & Installation of earth pit comprising of
600mm x 600mm x 3mm thick copper plate buried
at a minimum depth of 2.5 meter including
necessary materials like charcoal,salt etc as
required conforming to BIS standards having brick
masonary chamber with hinged cover and
watering arrangement. (Earth Pit - 1) (Dedicated
UPS Earthing Pit)
1 Nos
2
Supply & Installation of earth pit comprising of
600mm x 600mm x 3mm thick GI plate buried at a
minimum depth of 2.5 meter including necessary
materials like charcoal,salt etc as required
conforming to BIS standards having brick
masonary chamber with hinged cover and
watering arrangement. (Earth Pit - 2) (Electrical
Earthing Pit)
1 Nos
3
Supply & Installation of copper /GI earthing
wires/strips in following sizes including all
necessary hardware & accessories, etc.:-
3.1
8 SWG copper bare wire (From Main Electrical
Earthing Busbar to LDB, RPDB, ACPDB, UPSDB,
A.C. m/c's i/p MCB boxes etc.)
250 Mtrs
3.2
12 SWG copper bare wire (From Main Electrical
Earthing Busbar to A.C. m/c's i/p MCB boxes,
etc.)
50 Mtrs
3.3 25 x 3 Cu. Strip (Electrical Earthing) 5 Mtrs
3.4 8 SWG GI bare wire (External Lighting Earthing) 5 Mtrs
3.5 12 SWG GI bare wire (External Lighting Earthing) 5 Mtrs
3.6
32 x 6 GI. Strip (Electrical Earthing) (From
Electrical Earthing Pit to Main Electrical Earthing
Busbar)
69 Mtrs
3.71C x 16 sq.mm flexible Cu. Wire through heavy
guage PVC conduit (Dedicated UPS Earthing)5 Mtrs
3.81C x 10 sq.mm flexible Cu. Wire through heavy
guage PVC conduit (Dedicated UPS Earthing)70 Mtrs
4
Supply & Installation of (32 x 6) mm of 300mm
length Cu. earthing bus with enclouser with
sufficient no. of hole for connecting earthing wire
with necessary accessories, hardware, etc.
1 Nos
5
Supply & Installation of (32 x 6) mm of 300mm
length GI. earthing bus with enclouser with
sufficient no. of hole for connecting earthing wire
with necessary accessories, hardware, etc.
1 Nos
TOTAL of SECTION (E) Rs.
F VOICE NETWORKING (38V)
1Supply & laying of 2-pair telephone wire through
already laid pvc conduits.450 Rmt.
2
Supply & installation of RJ-11 1M telephone
socket outlet point including PVC back box
alongwith necessary hardware & accessories, etc.20 Nos.
PRICE BID CIVIL,INTERIOR EL. Page35 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
3Supply & Installation of 50 pair MDF with Krone
module 1 Nos.
4 Supply & Installation of Data point outlet PVC back box20 Nos.
5Termination, Testing and Documentation of
Telephone Points20 Nos.
6Supply & Laying of 10 pair telephone cable
through PVC conduit30 Rmt
TOTAL of SECTION (F) Rs.
G MUSIC CUM PUBLIC ADDRESS SYSTEM
1
Supply, Installation, Testing, Commisioning of
point wiring for music - cum PA system
comprising of 2x 1.0 sqmm stranded , copper
conductor , flexible PVC insulated and PVC
Sheathed wire pulled through 20 mm dia. PVC
heavy gauge conduits and looped from one
speaker to other and to the volume control switch
wherever applicable and finally terminated an
tagblock
7 Nos
2
Supply, Installation, Testing, Commisioning of of
6" dia music speakers to be flushed mounted on
false ceiling similer to BOSCH / approved
equivalent make.All speakers to be equipped with
matching transformer for direct connection to
100v output line
7 Nos
3
Supply, Installation, Testing, Commisioning of
volume control - cum - ON - OFF switch flush
mounted on wall along with other electrical
switches .The size and plate of the regulating
knob should match with other switches nearby.
2 Nos
4Supply, Installation & Testing of Microphone of
Ahuja / approved equivalent make1 Nos
5
Supply, Installation & Testing of Amplifier for
Public Address System suitable to operate on
230V A.C. / 12V D.C. supply with two low
impedence microphone input, tone control,
protection circuit complete for the speakers output
lines.(Ahuja / approved equivalent make)
1 Nos
6
Supply, Installation & Testing of Music system
(but cost of the player not more than Rs. 6500/-),
the system to be of Philips/Sony or equivalent
approved make. The system to comprise of MP3
compatible discs, FM radio, Audio casette, etc.
complete with all neccessary hardware &
accessories, etc.
1 Nos
TOTAL of SECTION (G) Rs.
HBUY - BACK OF REMOVED ELECTRICAL
MATERIAL
PRICE BID CIVIL,INTERIOR EL. Page36 of 37
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
1
Removing, storing & Buy -Back of all removed un-
useable electrical materials including wires, pvc
conduits, casing caping, switchs, sockets, tube
lights, light fittngs, MCB's, DB's, Panel, etc. as per
instructions given & approved by the Client /
Branch Manager / Consultant at site. Contractor
shall take approval & official permission before
dispatching the buy-back material from site. (Item
to be quoted as one JOB on Lumpsum basis.)
1 LS
NOTE :- Client reserves final authority / right to
allow buy back's scope into contractor's scope of
work or not. And contractor shall take final
approval from Bank's Branch Manager / Engineer
for buy-back's final approval before taking away
buy-back material from the site.
TOTAL Electrical works Rs.
No. Description Qty. Unit Rate Amount
ATOTAL OF INTERIOR FIXED ASSET
WORKSRs.
B TOTAL OF FURNITURE WORKS Rs.
C TOTAL OF CIVIL WORKS Rs.
D TOTAL OF ELECTRICAL WORKS Rs.
TOTAL COST OF INTERIOR RENOVATION
& FURNISHING AND ELECTRICAL
WORKS (A+B+C+D)
Rs.
GRAND TOTAL
(GST will be paid extra as per actual )
SUMMARY STATEMENT
PRICE BID CIVIL,INTERIOR EL. Page37 of 37