Internal Hex. Product Catalog, 2016 - English

MAKE IT S I M P LE

Internal HexagonProduct Catalog, 2016

Learn more about MIS Implants

visit our website: www.mis-implants.com

or scan the QR Code

Internal Hexagon Product C

atalog, 2016

MC-CIH06 Rev.13

© MIS Corporation. All rights reserved. * Additional information may be added to the product descriptions without prior notice.

Established in 1995,

MIS Implants Technologies Ltd. is a global

leader in the development and production of advanced

products and innovative solutions aimed to simplify dental

implantology. Through our state-of-the-art production facilities, MIS

offers a comprehensive range of high quality dental implants,

superstructures, tools and kits, as well as extensive

solutions for oral restoration and health.









1.

PROSTHETICS

90 - 91 Analog and Impression Coping92 - 92 Temporary Restoration93 - 101 Cemented Restoration102 - 106 Screw Retained Restoration107 - 117 Overdenture

IMPLANTS

6 - 37 Implant Systems38 - 58 Tools59 - 86 Kits

TABLE OF CONTENTS

3.

ADDITIONAL INFORMATION

i2 - i55

MCENTER (DIGITAL DENTISTRY)

132 - 143 MGUIDE144 - 147 MLAB

REGENERATIVE SOLUTIONS

120 - 123 Bone Grafting Materials124 - 126 Barrier Membranes127 - 128 Collagen Wound Dressings

INDEX

MIS proudly offers a wide range of implant systems, providing simple solutions for a wide variety of clinical scenarios, from basic to complex. Each and every implant design is based on a long history of advanced R&D. MIS implants are made of biocompatible, medical grade Titanium Alloy, with a surface of the highest quality; treated by both sand blasting and acid-etching, to promote long-lasting osseointegration. MIS adheres to the most stringent international quality standards, complying with ISO 2003 :13485 Quality Management System for Medical Devices. Products that appear in this catalog are CE approved and FDA cleared for marketing.

IMPLANT SYSTEMS.

All products shown in this catalog are sold subject to individual regulatory certification only.

SEVEN Internal Hex. Ø3.30

Ø 2.40

Ø 3.30

L

Ø 2.10


Implant Systems

6.

Final drill For bone type 1&2

Final drill

Final drill For bonetype 1&2

1200-1500

Ø2.40 Ø3.30Ø1.90

900-1200

15-25

Ø2.20 Ø3.20

200-400

Ø2.40

Drilling Speed (RPM)

Diameter

Do not use the final drillfor bone types 3&4.

The drilling sequence is demonstrated with a 13mm implant.

Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.

MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330

MC1-00330

MH-52330MH-53330MH-54330MH-55330MH-56330

Implant cover screw & healing caps

Ø4

Ø4.3


Cat. No. Dimension Description Material Item includes Additional info.

MF7-10330 Ø3.30mmL=10mm SEVEN internal hex. implant Titanium Alloy

Ti 6Al 4V ELICover ScrewFinal Drill

See p. no. i2-5

MF7-11330 Ø3.30mmL=11.5mm SEVEN internal hex. implant Titanium Alloy


See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

7.


Ø 3.10

Ø 3.75

L

Ø 2.45


Implant Systems

8.

Final drill

OR

For bone type 3&4

CountersinkMT-GDN33

For bone type 1&2

MT-GDN33

Final drillFor bone type 1&2

For bonetype 3&4

CountersinkMT GDN33

1200-1500

900-1200

Ø1.90 Ø2.80 Ø3.75Ø2.40 Ø2.40

500-700 15-25

Ø2.80 Ø3.60

Ø3.75

200-400

200-500

Ø2.80


Diameter




MC1-00375


MH-03375MH-04375MH-05375MH-06375

Ø4

MH-53375MH-54375MH-55375MH-56375

Ø5.5

Ø 4.8

MH-A3375MH-A4375MH-A5375MH-A6375





See p. no. i2-5



See p. no. i2-5



See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

9.


Ø 3.70

Ø 4.20

Ø 3.75

L

Ø 2.45

0.4mm


Implant Systems

10.

For bone type 3&4

For bone type 1&2

Final drill CountersinkMT-GDN33

1200-1500

900-1200

Ø2.40 Ø2.80Ø1.90 Ø2.40

500-700

Ø3.20 Ø3.20

400-700

Ø3.30Ø4.10 Ø4.20

200-400

200-500

Ø4.20

15-25

OR

For bonetype 1&2

Final drill

For bone type 3&4

CountersinkMT-GDN33 MC1-00375


MH-03375MH-04375MH-05375MH-06375

Ø4

MH-53375MH-54375MH-55375MH-56375

Ø5.5

Ø 4.8

MH-A3375MH-A4375MH-A5375MH-A6375


Diameter








See p. no. i2-5



See p. no. i2-5



See p. no. i2-5



See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

11.

SEVEN Internal Hex. Ø5

Ø 4.50

Ø 5

Ø 4.5

0.4mm

L

Ø 2.45


Implant Systems

12.


Diameter




Ø4.10 Ø 4.90

Ø5

200-400

200-500

Ø5

15-25

Ø4

300-500

1200-1500

900-1200

Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90

500-700

400-700

Ø4

OR

For bone type 3&4

For bone type 1&2


MH-W3500MH-W4500MH-W5500

MC1-00470

MH-W3630MH-W4630MH-W5630


Ø5

Ø6.5



MF7-06500 Ø5mmL=6mm SEVEN internal hex. implant Titanium Alloy


See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

MF7-11500 Ø5mmL=11.5mm SEVEN internal hex. implant Titanium Alloy


See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

13.


Ø 5.50

Ø 6

Ø 4.5

0.4mm

L

Ø 2.45


Implant Systems

14.


Diameter




Ø5.10 Ø 5.90

Ø6

200-400

200-500

Ø6

15-25

Ø4 Ø4.5

300-500

300-500

300-500

1200-1500

900-1200

Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90

500-700

400-700

Ø5 Ø5

Ø2.40

Ø4.5

300-500

300-500

Ø5

For bone type 3&4

For bone type 1&2


OR

Ø5





See p. no. i2-5



See p. no. i2-5



See p. no. i2-5

MF7-11600 Ø6mmL=11.5mm SEVEN internal hex. implant Titanium Alloy


See p. no. i2-5



See p. no. i2-5

15.

MIS MULTIFIXFixed Restoration for Atrophic Ridges

MIS MULTIFIX 18 and 20mm Implants



Ti 6Al 4V ELICover ScrewFinal Drill See p. no. i6








Implant Systems

17.

MIS MULTIFIX Drilling Set for 18 and 20mm


MT-ETD24 Ø2.4mmL=39mm Extra-long twist drill Stainless steel - See p. no. i7




MT-LBT24 Ø2.4mmL=34mm Long body try-in Stainless steel - See p. no. i7


Implant Systems

MK-0058

18.

For bone type 3&4

For bone type 1&2


1200-1500

900-1200

Ø2.40 Ø2.80Ø1.90 Ø2.40

500-700

Ø3.20Ø3.50

Ø3.20

400-700

Ø3.20Ø4.20

200-400

200-500

Ø4.20

15-25

OR

For bone type 3&4

For boneFinal drill

CountersinkMT-GDN33

type 3&4

For bonetype 1&2


Diameter


The drilling sequence isdemonstrated with a 18mm, Ø4.20mm implant.






19.

MIS MULTIFIX Bone Profiler Kit


MT-BP320 Ø3.2mm Bone profiler, internal hex., NP Stainless steel - See p. no. i8-9

MT-BP370 Ø3.7mm Bone profiler, internal hex., SP Stainless steel - See p. no. i8-9

MT-BP460 Ø4.6mm Bone profiler, internal hex., WP Stainless steel - See p. no. i8-9

MT-BGP32 Ø3.2mm Bone profiler guide pin, internal hex., NP Stainless steel - See p. no.

i8-9

MT-BGP37 Ø3.7mm Bone profiler guide pin, internal hex., SP Stainless steel - See p. no.

i8-9

MT-BGP46 Ø4.6mm Bone profiler guide pin, internal hex., WP Stainless steel - See p. no.

i8-9


Implant Systems

MK-0059

20.

MIS MULTIFIX 18 AND 20MM IMPLANTSMIS MULTIFIX

MIS MULTIFIX BONE PROFILER KITMIS MULTIFIX DRILLING SET FOR 18 AND 20MM

M4 Internal Hex. Ø3.30

Ø 2.65

Ø 3.30

L

Ø 2.10


Implant Systems

22.

1200-1500

900-1200

Ø1.90 Ø2.4Ø2.80

500-700

200-500

Ø3.30

15-25Ø3.00Ø3.30

For bone type 3&4

CountersinkMT-CSN33For bone

type 1&2

OR

type 3&4

type 1&2

MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330

MC1-00330

MH-52330MH-53330MH-54330MH-55330MH-56330


Ø4

Ø4.3


Diameter






MF4-10330 Ø3.30mmL=10mm M4 internal hex. implant Titanium Alloy

Ti 6Al 4V ELI Cover Screw See p. no. i2-5

MF4-11330 Ø3.30mmL=11.5mm M4 internal hex. implant Titanium Alloy






23.


Ø 3

Ø 3.75

L

Ø 2.45


Implant Systems

24.

1200-1500

900-1200

Ø1.90 Ø2.80Ø2.40

500-700

400-700

15-25Ø3.20

Ø3.75

200-500

Ø3.75

For bone type 3&4

CountersinkMT-GDN33For bone

type 1&2

OR

yp

MC1-00375

MH-53375MH-54375MH-55375MH-56375


MH-03375MH-04375MH-05375MH-06375

Ø4

Ø5.5

Ø 4.8

MH-A3375MH-A4375MH-A5375MH-A6375


Diameter
















25.


Ø 3.65

Ø 4.20

Ø 3.75

L

Ø 2.45

0.4mm


Implant Systems

26.


Diameter




MH-03375MH-04375MH-05375MH-06375

MC1-00375

MH-53375MH-54375MH-55375MH-56375


Ø4

Ø5.5

Ø 4.8

MH-A3375MH-A4375MH-A5375MH-A6375

1200-1500

900-1200

Ø1.90 Ø2.80Ø2.4

500-700

400-700

400-600

15-25

Ø3.20Ø3.80

Ø4.20

200-500

Ø4.20

For bone type 3&4


type 1&2For bone type 3&4

CountersinkMT-GDN33

OR















27.

M4 Internal Hex. Ø5

Ø 4.35

Ø 4.5

Ø 5

L

0.4mm

Ø 2.45


Implant Systems

28.


Diameter




1200-1500

900-1200

Ø1.90 Ø2.80Ø2.40

500-700

400-700

400-600

400-600

15-25

Ø3.20 Ø3.80Ø4.50

Ø5

200-500

Ø5

For bone type 3&4



CountersinkMT-GDN50

OR

MH-W3500MH-W4500MH-W5500

MC1-00470

MH-W3630MH-W4630MH-W5630


Ø5

Ø6.5



MF4-06500 Ø5mmL=6mm M4 internal hex. implant Titanium Alloy






MF4-11500 Ø5mmL=11.5mm M4 internal hex. implant Titanium Alloy






29.


Ø 5.35

Ø 4.5

Ø 6

0.4mm

L

Ø 2.45


Implant Systems

30.

1200-1500

900-1200

Ø1.90 Ø2.80Ø2.4

500-700

400-700

400-600

400-600

Ø3.20 Ø3.80 Ø4.50

15-25

Ø6

300-500300-

500

200-500

Ø5.50Ø5

Ø6.00

For bone type 3&4



CountersinkMT-GDN50

OR

type 1&2





Diameter

MH-W3500MH-W4500MH-W5500

MC1-00470

MH-W3630MH-W4630MH-W5630


Ø5

Ø6.5









MF4-11600 Ø6mmL=11.5mm M4 internal hex. implant Titanium Alloy




31.

UNO One-Piece Implant Ø3

Ø 3

L

2.7mm

6.3mm


Implant Systems

32.

Ø2.40

700-900

Ø2.40Ø2

15-25

Ø3

900-1200

Ø2

1200-1500

Ø1.90


Diameter






MO1-10300 Ø3mmL=10mm UNO One-Piece implant Titanium Alloy

Ti 6Al 4V ELI - See p. no. i2-5

MO1-11300 Ø3mmL=11.5mm UNO One-Piece implant Titanium Alloy






33.

UNO One-Piece Implant Ø3.50

Ø 3.50

L

2.7mm

6.3mm


Implant Systems

34.

Ø3

900-1200

Ø2 Ø2

700-900

Ø2.40

500-700

Ø3

15-25

Ø3.50

1200-1500

Ø1.90


Diameter






MO1-10350 Ø3.50mmL=10mm UNO One-Piece implant Titanium Alloy


MO1-11350 Ø3.50mmL=11.5mm UNO One-Piece implant Titanium Alloy






35.

LINK - Orthodontic Anchor Screw

L

Ø 2.75

2.5

2.5mm

1mm


Implant Systems

36.



MG2-06160 Ø1.6mmL=6mm

LINK - Orthodontic anchor screw

Titanium Alloy Ti 6Al 4V ELI - -

MG2-08160 Ø1.6mmL=8mm



MG2-10160 Ø1.6mmL=10mm



MG2-12160 Ø1.6mmL=12mm



MT-TDO01 Ø1mmL=28mm

LINK - Orthodontic anchor pilot drill Stainless steel - -

MT-SCD20 L=28mm Short cross driver for orthodontic screws Stainless steel - -

MT-LCD20 L=54mm Long cross driver for orthodontic screws Stainless steel - -

MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum - -

37.

Pilot Drills - External Irrigation

Cat. No. Dimension Description Material Placement Additional info.

MT-TDN20 Ø2mmL=37.3mm Pilot drill, external irrigation Stainless steel See p. no. i10 STAND

ALONE

MT-P2406 Ø2.40mmL=31.8mm

Pilot drill with built-in stopper, height 6mm Stainless steel See p. no. i10 STAND

ALONEINSIDE

KIT

MT-P2408 Ø2.40mmL=31.8mm


ALONEINSIDE

KIT

MT-P2410 Ø2.40mmL=31.8mm


ALONEINSIDE

KIT


Tools

38.

6 DepthMarks

6mm8mm

10mm11.50mm

13mm

16mm

0mm

16mm




MT-P2411 Ø2.40mmL=31.8mm

Pilot drill with built-in stopper, height 11.50mm Stainless steel See p. no. i10 STAND

ALONEINSIDE

KIT

MT-P2413 Ø2.40mmL=31.8mm


ALONEINSIDE

KIT

MT-P2416 Ø2.40mmL=37.5mm Pilot drill, height 16mm Stainless steel See p. no. i10 STAND

ALONEINSIDE

KIT

39.

SEVEN - Twist Drills External Irrigation


MT-TDT28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND

ALONEINSIDE

KIT


ALONEINSIDE

KIT

MT-TDT40 Ø4mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND

ALONEINSIDE

KIT


ALONEINSIDE

KIT

MT-TDT50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND

ALONEINSIDE

KIT

SEVEN - Twist Drills External Irrigation

Tools

40.


M4 - Twist Drills External Irrigation


MT-TDN28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND

ALONEINSIDE

KIT


ALONEINSIDE

KIT


ALONEINSIDE

KIT


ALONEINSIDE

KIT

MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND

ALONEINSIDE

KIT


ALONEINSIDE

KIT

M4 - Twist Drills External Irrigation

Tools

41.

SEVEN and M4 - Short Twist Drills

External Irrigation


MT-TDI28 Ø2.80mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND

ALONE


ALONE


ALONE


ALONE


External Irrigation

Tools

42.

7Drilling Diameter Options

Ø 2

.80

Ø 3

.20

Ø 3

.80

Ø 4

Ø 4

.50

Ø 5

Ø 5

.50



External Irrigation



ALONE


ALONE


ALONE

43.

SEVEN and M4 - Twist Drills Internal

Irrigation


MT-TD280 Ø2.80mmL=37.5mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND

ALONE


ALONE


ALONE

MT-TD400 Ø4mmL=37.8mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND

ALONE

SEVEN and M4 - Twist Drills Internal Irrigation

Tools

44.

7Internal Irrigation Drills


SEVEN and M4 - Twist Drills

Internal Irrigation



ALONE

MT-TD500 Ø5mmL=38.2mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND

ALONE


ALONE

45.

Marking Drills and Countersinks


MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel - STAND

ALONEINSIDE

KIT

MT-TD110 Ø1.90mmL=34mm Marking drill, internal irrigation Stainless steel - STAND

ALONE

MT-SMD10 L=30mm Spade marking drill Stainless steel - STANDALONE

INSIDEKIT

MT-PD440 Ø4mmL=32.7mm Position drill Stainless steel - STAND

ALONE


Tools

46.

5 CountersinksDepth Marksaaaaaaa

Narrow Platform

Ø3.30

Ø3.75

Ø4.20

Standard Platform

Ø5

Ø6

Wide Platform




MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel - STAND

ALONEINSIDE

KIT

MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel - STAND

ALONEINSIDE

KIT

MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel - STAND

ALONEINSIDE

KIT

47.

Ceramic Drills


MT-CRD21 Ø2.10mmL=28.5mm Ceramic marking drill Ceramic - STAND

ALONE

MT-CRD20 Ø2mmL=33.5mm Ceramic pilot drill Ceramic - STAND

ALONE

MT-CRD28 Ø2.80mmL=35mm Ceramic twist drill Ceramic - STAND

ALONE

Ceramic Drills

Tools

48.


Trephine Burrs


MT-00400 Ø4/5mmL=37mm Trephine burr Stainless steel - STAND

ALONE


ALONE


ALONE

Trephine Burrs

Tools

49.

Ratchets


MT-RI030 L=84mm Monoblock Ratchet - See p. no. i15 STANDALONE

INSIDEKIT

MT-RI040 L=95mm Torque Ratchet for prosthetic screws - See p. no. i15 STAND

ALONEINSIDE

KIT

MT-RT070 L=95mm Torque Ratchet for implant placement - See p. no. i15 STAND

ALONEINSIDE

KIT

Ratchets

Tools

50.


Surgical Tools


MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel - STANDALONE

INSIDEKIT

MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel - STANDALONE

INSIDEKIT

MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel - STANDALONE

INSIDEKIT

MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel - STANDALONE

INSIDEKIT

MT-MRH10 L=19mm Hex. ratchet short adapter, internal hex. Stainless steel - STAND

ALONE

MT-MRH20 L=25mm Hex. ratchet long adapter, internal hex. Stainless steel - STAND

ALONE

Surgical Tools

Tools

51.

Surgical Tools


MT-NRH10 L=25mm Long ratchet adapter, internal hex., NP Stainless steel - STAND

ALONEINSIDE

KIT

MT-NRH20 L=25mm Hex. ratchet long adapter, internal hex., NP Stainless steel - STAND

ALONE

MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE

INSIDEKIT

MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE

INSIDEKIT

MT-RB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE

INSIDEKIT

MT-MUR02 L=18.7mm Angulated Multi-Unit key Stainless steel - STANDALONE

INSIDEKIT

MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel - STAND

ALONE

MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel - STAND

ALONEINSIDE

KIT

MT-HDS30 L=16mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE

MT-HDL30 L=22mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE

MT-RMR05 L=27.5mm Short direct hand and ratchet key Stainless steel - STAND

ALONE

52.


Surgical Tools


MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel - STAND

ALONEINSIDE

KIT

MT-HMR05 L=20.5mm Short direct hand and ratchet hex. key Stainless steel - STAND

ALONE

MT-HMR10 L=25mm Long direct hand and ratchet hex.key Stainless steel - STAND

ALONE

MT-SRA10 L=15.50mm Square connection to ratchet adapter Stainless steel - STAND

ALONEINSIDE

KIT

MT-PP001 Ø2.0/3.20mmL=24mm Parallel pin Stainless steel - STAND

ALONEINSIDE

KIT

MT-DE001 L=24mm Drill extender Stainless steel - STANDALONE

INSIDEKIT

MT-HW001 L=13mm Hand wrench Stainless steel - STANDALONE

INSIDEKIT

MT-TP500 Ø4.5mmL=28mm Tissue punch Stainless steel - STAND

ALONE

MT-DI001 L=17mm Implant direction indicator Stainless steel - STANDALONE

INSIDEKIT

MT-RKS15 L=13.5mm UNO One-Piece implant short key Stainless steel - STAND

ALONEINSIDE

KIT

MT-RKL21 L=18mm UNO One-Piece implant long key Stainless steel - STAND

ALONEINSIDE

KIT

53.

7 Connection Types

Surgical Tools


MT-HKS15 L=12mm UNO One-Piece implant short key Stainless steel - STAND

ALONE

MT-HKL21 L=17mm UNO One-Piece implant long key Stainless steel - STAND

ALONEINSIDE

KIT

MT-HKO21 L=18.8mm UNO One-Piece implant insertion tool Stainless steel - STAND

ALONEINSIDE

KIT

MT-UMS21 L=22mm UNO One-Piece implant short motor adapter Stainless steel - STAND

ALONE

MT-UML21 L=30mm UNO One-Piece implant long motor adapter Stainless steel - STAND

ALONEINSIDE

KIT

MT-RT070 L=95mm Torque Ratchet for implant placement - - STAND

ALONEINSIDE

KIT

MT-RA480 - Ratchet to hex. adapter Stainless steel - STANDALONE

54.


Prosthetic Instruments


MT-AL005 L=72mm Allen key for 0.05 inch hex. Stainless steel - STANDALONE

MT-TSD10 L=50mm Screw driver for titanium ball cap Stainless steel - STAND

ALONE

MT-IT100 L=16.5mm Closed tray impression coping key Stainless steel - STAND

ALONE

MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel - STAND

ALONE

MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel - STAND

ALONEINSIDE

KIT

MT-NB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE


Tools

55.



MT-HHR07 L=22mm Short screwdriver for 0.05 inch hex. Stainless steel - STAND

ALONE

MT-HHR13 L=28mm Hand driver for 0.05 inch hex. Stainless steel - STANDALONE

INSIDEKIT

MT-HDS30 L=16mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE

MT-HDL30 L=22mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE

MT-IE172 L=27mm Int. connection abutment extractor Titanium - STAND

ALONEINSIDE

KIT

MT-IE160 L=27mm Int. connection abutment extractor, NP Titanium - STAND

ALONEINSIDE

KIT

MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum - STAND

ALONEINSIDE

KIT

MT-URA10 L=27mm Universal hand driver ratchet head adapter Stainless steel - STAND

ALONEINSIDE

KIT

MT-UN002 L=24mm Implant analog for universal hand driver, Internal hex., NP Stainless steel - STAND

ALONEINSIDE

KIT

MT-US002 L=24mm Implant analog for universal hand driver, internal hex., SP Stainless steel - STAND

ALONEINSIDE

KIT

MT-UW002 L=24mm Implant analog for universal hand driver, internal hex., WP Stainless steel - STAND

ALONEINSIDE

KIT

56.




MT-CS450 - Shoulders reamer Stainless steel - STANDALONE

MT-HTS10 L=142.5mm Technical hex. screwdriver Stainless steel+ plastic - STAND

ALONEINSIDE

KIT

MT-GDM01 Ø2/4/6/8mm Gingival depth measuring instrument Stainless steel - STAND

ALONE

MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti - STAND

ALONEINSIDE

KIT

MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel - STAND

ALONEINSIDE

KIT

MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel - STAND

ALONEINSIDE

KIT

MT-RB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE

INSIDEKIT

MT-RDM30 L=11.50mm Extra-short driver for 0.05 inch hex. Stainless steel - STAND

ALONE

MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE

INSIDEKIT

MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE

INSIDEKIT

MT-RDE30 L=32mm Extra-long driver for 0.05 inch hex. Stainless steel - STAND

ALONE

57.

Ratchet / Hand Connection

Motor Connection

2 Key Types



MT-RE172 L=28.5mm Int. connection abutment extractor Titanium - STAND

ALONEINSIDE

KIT

MT-RE160 L=28.5mm Int. connection abutment extractor, NP Titanium - STAND

ALONEINSIDE

KIT

MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel - STAND

ALONEINSIDE

KIT

MT-MUR02 L=18.7mm Angulated Multi-Unit key Stainless steel - STANDALONE

INSIDEKIT

MT-RI040 L=95mm Torque Ratchet for prosthetic screws - - STAND

ALONEINSIDE

KIT

ET-IT001 - OT-Equator handling tools - - STANDALONE

INSIDEKIT

58.


SEVEN Advanced Surgical Kit


MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-SMD10 L=30mm Spade marking drill Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-P2406 Ø2.40mmL=31.8mm

Pilot drill with built-in stopper, height 6mm Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-P2408 Ø2.40mmL=31.8mm


i16-17 STANDALONE

INSIDEKIT

MT-P2410 Ø2.40mmL=31.8mm


i16-17 STANDALONE

INSIDEKIT

MT-P2411 Ø2.40mmL=31.8mm

Pilot drill with built-in stopper, height 11.50mm Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT


Kits

MK-EI48

59.



MT-P2413 Ø2.40mmL=31.8mm


i16-17 STANDALONE

INSIDEKIT

MT-P2416 Ø2.40mmL=37.5mm Pilot drill, height 16mm Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-TDT28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT

MT-TDT40 Ø4mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT

MT-BTT24 Ø2.40mmL=28.5mm Body try-in Titanium See p. no.

i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT

MT-BTT40 Ø4mmL=28.5mm Body try-in Titanium See p. no.

i16-17 STANDALONE

INSIDEKIT

60.





i16-17 STANDALONE

INSIDEKIT


i16-17 STANDALONE

INSIDEKIT

MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-PP240 Ø2.40mmL=24mm Parallel pin Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-DE001 L=24mm Drill extender Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-RT070 L=95mm Torque Ratchet for implant placement - See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

61.

Procedures5

Ø3.30mm

Ø2.80 Ø3.20 Ø4 Ø4.50 Ø5

Ø3.75mm Ø4.20mm Ø5mm Ø6mm



MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel See p. no. i16-17

STANDALONE

INSIDEKIT

MT-NRH10 L=25mm Long ratchet adapter, internal hex., NP Stainless steel See p. no.

i16-17 STANDALONE

INSIDEKIT

MN-PF330MD-PF375

H=11mmH=11mm Direct press fit for closed tray Titanium See p. no.

i16-17 STANDALONE

INSIDEKIT

NPSP

62.


M4 Advanced Surgical Kit



STANDALONE

INSIDEKIT

MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT


i18-19 STANDALONE

INSIDEKIT

MT-TDN28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT


i18-19 STANDALONE

INSIDEKIT


i18-19 STANDALONE

INSIDEKIT


Kits

MK-0016

63.




i18-19 STANDALONE

INSIDEKIT

MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT


i18-19 STANDALONE

INSIDEKIT

MT-DE001 L=24mm Drill extender Stainless steel See p. no. i18-19

STANDALONE

INSIDEKIT


i18-19 STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT

MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT

MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT

MT-PP240 Ø2.40mmL=24mm Parallel pin Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT

64.

5Procedures

Ø3.30

Ø3.75 Ø4.20

Ø5

Ø6




MT-RI030 L=84mm Monoblock Ratchet - See p. no. i18-19

STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel See p. no.

i18-19 STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

65.

M4 Drilling Set



ALONEINSIDE

KIT


ALONEINSIDE

KIT


ALONEINSIDE

KIT


ALONEINSIDE

KIT

MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND

ALONEINSIDE

KIT


ALONEINSIDE

KIT

M4 Drilling Set

Kits

MK-0014

66.

6Depth Options

6mm

8mm

10m

m

11.5

mm

13m

m

16m

m


M4 Drilling Set


MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel See p. no. i20 STAND

ALONEINSIDE

KIT

MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no. i20 STAND

ALONEINSIDE

KIT

MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no. i20 STAND

ALONEINSIDE

KIT

67.

UNO Implant Surgical Kit



STANDALONE

INSIDEKIT


i24-25 STANDALONE

INSIDEKIT

MT-TDN20 Ø2mmL=37.3mm Pilot drill, external irrigation Stainless steel See p. no.

i24-25 STANDALONE


i24-25 STANDALONE

INSIDEKIT


i24-25 STANDALONE

INSIDEKIT

MT-UML21 L=30mm UNO One-Piece implant long motor adapter Stainless steel See p. no.

i24-25 STANDALONE

INSIDEKIT


Kits

MK-0036

68.

KeyHeights2 13.5mm

18mm




MT-PP001 Ø2.0/3.20mmL=24mm Parallel pin Stainless steel See p. no.

i24-25 STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

MT-RKL21 L=18mm UNO One-Piece implant long key Stainless steel See p. no.

i24-25 STANDALONE

INSIDEKIT

MT-RKS15 L=13.5mm UNO One-Piece implant short key Stainless steel See p. no.

i24-25 STANDALONE

INSIDEKIT

69.

SEVEN Standard Platform Drill Stoppers

Kit


Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Drill Stoppers Kit ensures drilling to the exact depth desired. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.

For more info see p. no. i28

SEVEN Standard Platform

Drill Stoppers Kit

Kits

MK-BS001

70.


SEVEN Drill Stopper Kits - Depth Based


MK-SDS06 L=6mm Drill stoppers kit for 6mm SEVEN implants Stainless steel See p. no. i29



MK-SDS11 L=11.5mm Drill stoppers kit for 11.5mm SEVEN implants Stainless steel See p. no. i29


SEVEN Drill Stopper Kits - Depth Based

Kits

MK-SDS##

71.

Bone Compression Kit


MO-CO160 Ø1.80-2.90mmL=25mm Convex compress screw Stainless steel See p. no.

i22-23INSIDE

KIT


i22-23INSIDE

KIT


i22-23INSIDE

KIT


i22-23INSIDE

KIT

MO-SO300 Ø3mmL=25mm Concave sinus screw Stainless steel See p. no.

i22-23INSIDE

KIT

MO-SO350 Ø3.50mmL=25mm Concave sinus screw Stainless steel See p. no.

i22-23INSIDE

KIT


Kits

MK-0020

72.

SurgicalProcedures2

Sinus LiftingBone Compression




MO-SO400 Ø4mmL=25mm Concave sinus screw Stainless steel See p. no.

i22-23INSIDE

KIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

73.

Sinus Lift Osteotomes Set


The MIS Sinus Lift Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet concave tools. All tools are laser marked for depths of: 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.

Sinus Lift Osteotomes Set

Kits

MK-0023

74.


Convex Osteotome Set


The MIS Convex Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet convex tools. All tools are laser marked for depths of: 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.

Convex Osteotome Set

Kits

MK-0024

75.

Abrahami Drill Guide Kit


The Abrahami Drill Guide Kit was designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.

For more info see p. no. i30


Kits

MK-0011

76.


Yeung Bone Harvest Kit


MT-BC280 Ø2.80mm Bone harvest drill Stainless steel See p. no. i21 STANDALONE

INSIDEKIT


INSIDEKIT


INSIDEKIT


INSIDEKIT


Kits

MK-BH26

77.

Prosthetic Tools Kit


MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti

See p. no. i26-27

STANDALONE

INSIDEKIT

MT-MUR02 L=18.7mm Angulated Multi-Unit key Stainless steel See p. no. i26-27

STANDALONE

INSIDEKIT

MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-RB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i26-27

STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel See p. no. i26-27

STANDALONE

INSIDEKIT


Kits

MK-0039

78.




MT-RE160 L=28.5mm Int. connection abutment extractor, NP Titanium See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-RE172 L=28.5mm Int. connection abutment extractor Titanium See p. no.

i26-27 STANDALONE

INSIDEKIT

MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel See p. no.

i26-27 STANDALONE


i26-27 STANDALONE

INSIDEKIT

MT-UN002 L=24mm Implant analog for universal hand driver, Internal hex., NP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-US002 L=24mm Implant analog for universal hand driver, internal hex., SP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-UW002 L=24mm Implant analog for universal hand driver, internal hex., WP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum

See p. no. i26-27

STANDALONE

INSIDEKIT

MT-URA10 L=27mm Universal hand driver ratchet head adapter Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

79.

Hex.Connection

ConicalConnection

Prosthetic Options 2 Implant

Connections4



ET-IT001 - OT-Equator handling tools - See p. no. i26-27

STANDALONE

INSIDEKIT

CT-UN001 L=24mm Implant analog for universal hand driver, conical conn., NP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

CT-US001 L=24mm Implant analog for universal hand driver, conical conn., SP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

CT-UW001 L=24mm Implant analog for universal hand driver, conical conn., WP Stainless steel See p. no.

i26-27 STANDALONE

INSIDEKIT

MT-RT070 L=95mm Torque Ratchet for implant placement - See p. no.

i26-27 STANDALONE

INSIDEKIT

80.


Prosthetic Planning Kit


The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient's mouth or on implant-level master models. The titanium superstructures are color-coded in accordance with MIS platforms: purple for Standard and green for Wide.

For more info see p. no. i32-33


Kits

MK-0040

81.

Abutment Holding System Kit


The Abutment Holding System enables the convenient grip of prosthetic components to allow simple and easy preparation of ceramic and titanium ae kit includes inserts for all MIS implants connections and platforms.

Abutment Holding System Kit

Kits

MK-0001

82.


Crown Set


The MIS Crown Set is a delivery system comprised of an auto-mix, easy-to-use dispensing syringe and disposable dispensing tips. The resin-based cement combines high retention properties along with the ability to remove a restoration if needed. The cement sets within 90 seconds and allows easy removal of excess material. Note: Abutments should be sand-blasted prior to cementation to achieve maximum retention.

Crown Set

Kits

MK-0022

83.

Zircon Diamond Burr Set


MT-A4022 - Diamond burr, 2.20mm - See p. no. i31INSIDEKIT

MT-B4018 - Diamond burr, 1.80mm - See p. no. i31INSIDEKIT

MT-F2121 - Diamond burr, 2.10mm - See p. no. i31INSIDEKIT

MT-K2023 - Diamond burr, 2.30mm - See p. no. i31INSIDEKIT

MT-C3125 - Diamond burr, 2.50mm - See p. no. i31INSIDEKIT


Kits

MK-DB01

84.


Prosthetic Introduction Case


MIS Prosthetic Introduction Case offers a wide variety of MIS prosthetic options. The kit includes stone models representative of common clinical cases, the MIS Prosthetic Planning Kit, with a wide variety of cement retained prosthetic options for use on the models, and the MIS Abutment Holding System Kit.



Kits

MK-PIC01

85.

Control Unit


MWH-M0131 - Control Unit 70Ncm(230v) - See p. no.

i34-35

MWH-M0132 - Control Unit 70Ncm(115v) - See p. no.

i34-35

MWH-2STUB - Irrigation system 1/2 way - See p. no. i34-35

MWH-MMOTR - Micro motor and cord kit - See p. no. i34-35

MWH-M7559 - Surgical contra-angle 20:1 - See p. no. i34-35

MWH-CAL59 - Surgical contra-angle LED 20:1 - See p. no. i34-35

Control Unit

Kits

MWH-M0131 / 132

86.

LINK

IMPLANT SYSTEMS

KITS

UNO ONE-PIECE

MIS MULTIFIXSEVEN

TOOLS

M4

MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions for both screw retained and cement retained restorations.

MIS temporary plastic abutments are made of PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up to 6 months.

MIS also offers Titanium Base abutments, compatible with most CAD/CAM systems' software. These abutments meet the specific requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options, the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and esthetic implant supported restorations.

PROSTHETIC OPTIONS.

Analog and Impression Coping

Cat. No. Dimension Description Material Platform Additional info.

MN-IT100MD-IT100MW-IT100

H=9mmH=9mmH=9mm

Direct impression coping for closed tray, internal hex. Stainless steel -WPSPNP

NPSPWP

MN-GP100MD-GP100MD-GP100

L=16.5mmL=16.5mmL=16.5mm

Direct impression coping guide pin, internal hex. Titanium -WPSPNP

NPSPWP

MN-I0330MD-I0375MW-I0470

H=11mmH=11mmH=11mm

Direct impression coping for open tray, internal hex. Stainless steel -WPSPNP

NPSPWP

MN-G0160MD-G0213MD-G0213

L=21mmL=21.3mmL=21.3mm

Direct impression coping guide pin for open tray Titanium -WPSPNP

NPSPWP

MN-IT300MD-IT300MW-IT300

H=7.8mmH=8mmH=8mm

Direct impression coping for closed tray, internal hex. Titanium -WPSPNP

NPSPWP


Analog and Impression

Coping

90.

Standard

Wide

Narrow

3Platforms

WP

SP

NP




MN-PF330MD-PF375

H=11mmH=11mm Direct press fit for closed tray Titanium -SPNP

NPSP

MW-PF550 H=11mm Direct press fit for closed tray, WP Titanium -WP

WP

MN-RSM10MD-RSM10MW-RSM10

L=12mmL=12mmL=12mm

Implant analog, internal hex. Stainless steel -WPSPNP

NPSPWP

91.

Temporary Restoration Options


MN-TPA10MD-TPA10MW-TPA10

Ø4mm, H=11mmØ4.75mm, H=11mmØ5.5mm, H=11mm

Temporary plastic abutment, Internal hex. PEEK -WPSPNP

NPSPWP

MN-TPA12MD-TPA12MW-TPA12

Ø3.5, H=11mmØ3.75, H=11mmØ4.5, H=11mm

Narrow profile temporary plastic abutment, internal hex. PEEK -WPSPNP

NPSPWP

MD-TPH50MW-TPH50

Ø5mm, H=12mmØ5.50mm, H=12mm

Direct temporary plastic cylinder, internal hex. PEEK -WPSP

SPWP

MN-TC013MD-TC013MW-TC013


Direct temporary free rotation cylinder, internal hex. Titanium -WPSPNP

NPSPWP

MN-TCH13MD-TCH13MW-TCH13


Direct temporary anti-rotation cylinder, internal hex. Titanium -WPSPNP

NPSPWP

Temporary Restoration Options

Temporary Restoration

92.


Esthetic Cemented Restoration Options


MD-A0010MW-P0010

H=9mmH=9mm

Esthetic 1mm abutment, internal hex. Titanium See p. no. i38WPSP

SPWP

MD-P0030 H=11mm Esthetic 3mm abutment, internal hex. Titanium See p. no. i38SP

SP

MD-A1510MW-P1510

H=9mmH=9mm

Esthetic 15° 1mm angulated abutment, internal hex. Titanium See p. no. i38WPSP

SPWP

MN-AN020 H=8mm 20° Angulated abutment, internal hex. Titanium See p. no. i38NP

NP

MD-AN151MW-AN151

H=9mmH=9mm

15° 1mm Angulated abutment, internal hex. Titanium See p. no. i38WPSP

SPWP

MD-P1530 H=11mm Esthetic 15° 3mm angulated abutment, internal hex. Titanium See p. no. i38SP

SP


Cemented Restoration

93.



MD-A2510 H=9mm Esthetic 25° 1mm angulated abutment, internal hex. Titanium See p. no. i38SP

SP

MD-AN251 H=8.5mm 25° 1mm Angulated abutment, internal hex. Titanium See p. no. i38SP

SP

MD-P2530 H=11mm Esthetic 25° 3mm angulated abutment, internal hex. Titanium See p. no. i38SP

SP

MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP

SPWP

MN-S0160MD-S0220MD-S0220

L=7.6mmL=7.6mmL=7.6mm

Direct prosthetic screw, 30 Ncm Titanium See p. no. i38WPSPNP

NPSPWP

MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s See p. no. i38WPSP

SPWP

MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP

SPWP

MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP

SPWP

94.


Standard Cemented Restoration Options


MN-MAC10MD-MAC10MW-MAC10


Cementing post Titanium -WPSPNP

NPSPWP

MD-WMAC1MW-WMAC1

Ø5.5mm, H=11mmØ6.5mm, H=11mm Wide profile cementing post Titanium -WPSP

SPWP

MD-MACF1 Ø4.75mm, H=11mm Friction fit cementing post with platform switching Titanium -SP

SP

MD-CTP10MW-CTP10

Ø3.75mm, H=8.5mmØ5.5mm, H=8.5mm Narrow profile cementing post Titanium -WPSP

SPWP

MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

MN-S0160MD-S0220MD-S0220


Direct prosthetic screw, 30 Ncm Titanium -WPSPNP

NPSPWP



95.

4Screw Height Options

6.9mm 7.6mm

12mm

14mm



MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s -WPSP

SPWP

96.


CPK - Complete Prosthetic Kit


MK-NPK41MK-CPK41MK-WPK41

H=1mm, C=4mmH=1mm, C=4mmH=1mm, C=4mm

Complete prosthetic kit Titanium See p. no. i39WPSPNP

NPSPWP




NPSPWP




NPSPWP




NPSPWP




NPSPWP




NPSPWP



C=4,6,8mm

H=1,2,3,4mm

97.






NPSPWP




NPSPWP

MK-CPK81MK-WPK81

H=1mm, C=8mmH=1mm, C=8mm Complete prosthetic kit Titanium See p. no. i39WPSP

SPWP

MK-CPK82MK-WPK82


SPWP

MK-CPK83MK-WPK83


SPWP

MK-CPK84MK-WPK84


SPWP

MN-CPK41MD-CPK41MW-CPK41


Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP

NPSPWP




NPSPWP




NPSPWP




NPSPWP




NPSPWP

98.

Gingival Heights 2 3Crown

HeightsCrown Heights4

H C

12

34

46

8

Standard & Wide PlatformNarrow Platform







NPSPWP




NPSPWP




NPSPWP

MD-CPK81MW-CPK81

H=1mm, C=8mmH=1mm, C=8mm

Transgingival abutment, internal hex. Titanium See p. no. i39WPSP

SPWP

MD-CPK82MW-CPK82



SPWP

MD-CPK83MW-CPK83



SPWP

MD-CPK84MW-CPK84



SPWP

99.

Zirconia Incisor Abutment Set


MK-NIC6MK-SIC6

H=8.5mmH=8.5mm

Zirconia pre-cemented incisor 15º abutment set, internal hex. Titanium/Zirconia -SPNP

NPSP

MK-NIZ6MK-SIZ6

H=8.5mmH=8.5mm

Zirconia non-cemented incisor 15º abutment set, internal hex. Titanium/Zirconia -SPNP

NPSP

Zirconia Incisor Abutment Set


8.5mm

2mmH1mm

100.


Zirconia Premolar Abutment Set


MK-SPC4MK-WPC4

H=8.4mmH=8.4mm

Zirconia pre-cemented premolar abutment set, internal hex. Titanium/Zirconia -WPSP

SPWP

MK-SPZ4MK-WPZ4

H=8.4mmH=8.4mm

Zirconia non-cemented premolar abutment set, internal hex., SP

Titanium/Zirconia -WPSP

SPWP

Zirconia Premolar Abutment Set


8.4mm

2.7mm1.8mm

H

101.

Screw Retained Restoration Options


MN-CPH13MD-CPH13MW-CPH13

Ø3.50mm, H=11mmØ3.75mm, H=11mmØ4.50mm, H=11mm

Direct plastic cylinder with hex., internal hex. Burnout Plastic -WPSPNP

NPSPWP

MN-CP013MD-CP013MW-CP013

Ø3.50mm, H=11mmØ 3.75mm, H=11mmØ4.50mm, H=11mm

Direct plastic cylinder without hex., internal hex. Burnout Plastic -WPSPNP

NPSPWP

MD-CPH50MW-CPH60


Wide profile direct plastic cylinder with hex., Internal hex. Burnout Plastic -WPSP

SPWP

MD-CP050MW-CP060


Wide profile direct plastic cylinder without hex. Burnout Plastic -WPSP

SPWP

MN-GPC10MD-GPC10MW-GPC10

Ø4.50mm, H=15.5mmØ5mm, H=15mmØ5.50mm, H=15mm

Direct gold plastic cylinder with hex.

Burnout Plastic + gold-a -WPSPNP

NPSPWP

MN-GP010MD-GP010MW-GP010


Direct gold plastic cylinder without hex.

Burnout Plastic + gold -a -WPSPNP

NPSPWP


Screw Retained

Restoration

102.

2 Types of Connections

Free Rotational Connection Anti-Rotational Connection




MN-CCI10MD-CCI10MW-CCI10


Direct anti-rotation CoCr plastic cylinder, Internal hex. Cobalt-Chrome -WPSPNP

NPSPWP

MN-CC010MD-CC010MW-CC010


Direct free rotation CoCr plastic cylinder Cobalt-Chrome -WPSPNP

NPSPWP

MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s -WPSP

SPWP

MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

MN-S0160MD-S0220MD-S0220



NPSPWP

MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium -WPSP

SPWP

103.

Multi-Unit System


MA-N1480MA-S1480MA-W1480

H=1mmH=1mmH=1mm

Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42WPSPNP

NPSPWP

MA-N2480MA-S2480

H=2mmH=2mm

Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42SPNP

NPSP

MA-N3480MA-S3480MA-W3480

H=3mmH=3mmH=3mm


NPSPWP

MA-N4480MA-S4480

H=4mmH=4mm

Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42SPNP

NPSP

MA-N5480MA-S5480MA-W5480

H=5mmH=5mmH=5mm


NPSPWP

MA-SA171MA-WA171

H=1mmH=1mm

Multi-Unit 17° angulated abutment, Internal hex., 20Ncm Titanium See p. no. i42WPSP

SPWP

Multi-Unit System

Screw Retained

Restoration

21°

17°

2.1mm

21°

30°

3.3mm2.75mm

1mm1mm

2.1mm

HH

104.


Multi-Unit System


MA-SA301MA-WA301

H=1mmH=1mm

Multi-Unit 30° angulated abutment, internal hex., 20Ncm Titanium See p. no. i42WPSP

SPWP

MU-RSM48 L=12mm Analog for Multi-Unit Titanium See p. no. i42

MU-H4480 L=3.3mm Healing cap for Multi-Unit Titanium See p. no. i42

MU-I0480 L=22mm Impression coping, open tray, for Multi-Unit Titanium See p. no. i42

MU-IT480 L=8mm Impression coping, closed tray, for Multi-Unit Titanium See p. no. i42

MU-T0480 L=10mm Titanium temporary cylinder for Multi-Unit Titanium See p. no. i42

MU-S0220 L=3.8mm Prosthetic screw for Multi-Unit, 25Ncm Titanium See p. no. i42

MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium See p. no. i42

MU-CP048 L=10mm Plastic cylinder for Multi-Unit Burnout plastic See p. no. i42

MU-MG480 L=14.5mm Direct gold for Multi-Unit Burnout plastic+gold-a See p. no. i42

MU-BGC48 L=3.3mm Gold bar coping abutmentfor Multi-Unit Gold-e See p. no. i42

105.

Multi-Unit System


MU-CC480 L=3.3mm CAD/CAM cementing cap for Multi-Unit Titanium See p. no. i42

MU-G0220 L=3.8mm Prosthetic gold screw for Multi-Unit, 20Ncm Gold S See p. no. i42

MT-NMK02 L=22mm Multi-Unit key Stainless steel See p. no. i42

MT-MUR02 L=18.7mm Angulated Multi-Unit key Stainless steel See p. no. i42

MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel See p. no. i42

MT-MURS2 L=16mm Straight Multi-Unit short ratchet key Stainless steel See p. no. i42

MT-MUML2 L=31mm Straight Multi-Unit long motor key Stainless steel See p. no. i42

MT-MUMS2 L=24mm Straight Multi-Unit short motor key Stainless steel See p. no. i42

106.


OT-Equator Kits



1.7mm

1-5mmH

OT-Equator Kits

Overdenture

107.

OT-Equator Kits


MK-NOE1MK-SOE1MK-WOE1

H=1mmH=1mmH=1mm

OT-Equator kit, internal hex. - See p. no. i40-41

WPSPNP

NPSPWP

MK-NOE2MK-SOE2

H=2mmH=2mm OT-Equator kit, internal hex. - See p. no.

i40-41SPNP

NPSP


H=3mmH=3mmH=3mm


WPSPNP

NPSPWP

MK-NOE4MK-SOE4

H=4mmH=4mm OT-Equator kit, internal hex. - See p. no.

i40-41SPNP

NPSP


H=5mmH=5mmH=5mm


WPSPNP

NPSPWP

ET-IT001 - OT-Equator handling tools - See p. no. i40-41

OE-IC002 - OT-Equator impression coping cap - See p. no.

i40-41

OE-IC001 - OT-Equator impressiontransfer cap - See p. no.

i40-41


MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel See p. no. i40-41

OE-RCP01 - OT-Equator soft retentive cap (pink) - See p. no.

i40-41

108.

4 Retention Cap Options

Extra Soft

Soft

Standard

High


OT-Equator Kits


OE-RCW01 - OT-Equator standard retentive cap (white) - See p. no.

i40-41

OE-RCV01 - OT-Equator rigid retentive cap (violet) - See p. no.

i40-41

OE-RCY01 - OT-Equator extra soft retentive cap (yellow) - See p. no.

i40-41

OE-RCB01 - OT-Equator laboratory retentive cap (black) - See p. no.

i40-41

OE-MH001 - OT-Equator metal housing - See p. no. i40-41

109.

Ball Attachment System


MB-N1375MW-B1500

H=1mmH=1mm

Ball attachment anchor, internal hex.

Titanium Nitridecoated Ti See p. no. i43WPSP

SPWP

MB-N2330MB-N2375

H=2mmH=2mm


Titanium Nitridecoated Ti See p. no. i43SPNP

NPSP

MB-N3330MB-N3375MW-B3500

H=3mmH=3mmH=3mm


Titanium Nitridecoated Ti See p. no. i43WPSPNP

NPSPWP

MB-N4330MB-N4375

H=4mmH=4mm


Titanium Nitridecoated Ti See p. no. i43SPNP

NPSP

MB-N5375MW-B5500

H=5mmH=5mm


Titanium Nitridecoated Ti See p. no. i43WPSP

SPWP

MB-AN152 H=2mm Ball anchor 15° angulated abutment, internal hex. Titanium See p. no. i43SP

SP


Overdenture

Gingival height 1,2,3,4,5mm

0.55mm

2.6mm

Ø2.25mm

H

110.




MB-AN252 H=2mm Ball anchor 25° angulated abutment, internal hex. Titanium See p. no. i43SP

SP

MB-RS375 L=15.1mm Ball attachment analog, internal hex. Stainless steel See p. no. i43

MB-SF200 L=3.5mm Plastic ball cap Plastic See p. no. i43

MB-GPS10 L=2.4mm Gold ball cap Gold-e See p. no. i43

MB-TTP10 L=3.1mm Titanium ball cap Titanium See p. no. i43

MB-PR010 Ø3.8mmL=2mm Plastic mounting sleeve Plastic See p. no. i43

MB-TBS10 Ø2.50mm Titanium ball cap spring, standard Steel See p. no. i43

MB-TBS20 Ø2.60mm Titanium ball cap spring, soft Steel See p. no. i43

MB-DMH10 - Double metal housing - See p. no. i43

MB-PPC10 L=2.6mm Standard plastic cap for metal housing Plastic See p. no. i43

MB-PPR10 L=2.6mm Soft plastic cap for metal housing retention 800-950g Plastic See p. no. i43

111.

2

Soft Retention

Standard Retention

Plastic Caps Retention Options



MB-DB235 Ø15mmL=2.6mm Plastic disc for ball attachment Plastic See p. no. i43

MT-NB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i43

MT-RB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i43

112.


Locator Attachment System


MB-NZL00MB-SZL00MB-WZL00

H=0mmH=0mmH=0mm

Locator abutment Titanium Nitride coated Ti -WPSPNP

NPSPWP


H=1mmH=1mmH=1mm


NPSPWP


H=2mmH=2mmH=2mm


NPSPWP


H=3mmH=3mmH=3mm


NPSPWP


H=4mmH=4mmH=4mm


NPSPWP


H=5mmH=5mmH=5mm


NPSPWP


Overdenture

1.78mm

Gingival height 0-6mm

*Note: Locator selection should be based on gingival height

H

113.




H=6mmH=6mmH=6mm


NPSPWP

MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti -

MM-LMP02 L=1.80mm Locator male processing package (2 pack) Steel / Nylon -

MM-LIC10 Ø4.70mmL=4.50mm

Locator impression coping(4 pack)

Aluminum polyethylene -

MM-LFA40MM-LFA50

Ø4mm, L=10.40mmØ5mm, L=10.40mm Locator female analog (4 pack) Aluminum

polyethylene -WPSPNP

NPSPWP

MM-LRM10 Ø4.70mmL=1.80mm

Locator replacement male clear(4 pack) Nylon -

MM-LLR10 Ø4.70mmL=1.80mm

Locator light extended(4 pack) Nylon pink -

MM-LEL10 Ø4.70mmL=1.80mm

Locator extra light retention(4 pack) Nylon blue -

MM-LER10 Ø4.70mmL=1.80mm

Locator extended range(4 pack) Nylon green -

MM-LELE1 Ø4.70mmL=1.80mm

Locator extra light extended(4 pack) Nylon red -

MM-LPP10 Ø4.60mmL=15mm

Locator parallel post(4 pack)

Polyethylene black -

114.

1.36-1.82 kg

2.27 kg

1.36 kg

0.68 kg

0.68 kg

5RetentionOptions

Ø4.70mm Ø4.70mm Ø4.70mm Ø4.70mm Ø4.70mm




MM-LBP10 Ø4.60mmL=1.80mm

Locator black processing(4 pack)

Polyethylene black -

MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel -

MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel -

MM-LSD15 L=15mm Locator square drive torque wrench driver Stainless steel -

MM-LSD21 L=21mm Locator square drive torque wrench driver Stainless steel -

115.

Bars


MM-TRU10 L=50mmH=2.6mm Titanium rider Titanium -

MM-GRU10 L=50mmH=2.75mm Gold rider Gold-e -

MM-PBU10 L=80mmH=2.3mm Plastic bar Plastic -

MM-GBU10 L=50mmH=2.3mm Gold bar Gold-e -

Bars

Overdenture

116.

3MaterialOptions

TiTitanium PlasticGold

Au POM


Bars


MM-TC100 L=3.5mmH=2.5mm Gold rider Gold-e -

MM-PC100 Ø1.9mmL=85mm Plastic round bar Burnout plastic -

MM-GB100 Ø1.9mmL=50mm Gold bar Gold-e -

117.

Flexibility is a key feature of the MIS expanded 4BONETM product range. The name 4BONE represents an entire family of quality regenerative biomaterial solutions consisting of bovine, porcine and synthetic based products that offer solutions for a wide range of bone regeneration procedures.

REGENERATIVE SOLUTIONS

120.



4BONE™ BCH - Synthetic Bone

Substitute

Bone Grafting Materials

BS-4BS01 4BONE BCH syringe 0.5cc, granule size: 0.5-1mm

BS-4BS1S 4BONE BCH tube 1cc, granule size: 0.5-1mm

BS-4BS25 4BONE BCH tube 2.5cc, granule size: 1-2mm

4BONE BCH is a fully synthetic bone graft material made of HA (60%) and �-TCP (40%). Its osteoconductive structure, featuring 70% interconnected macro-porosity and micro-porosity, promotes colonization of osteogenic cells and allows the diffusion of biological fluids. Combined with its optimized morphology. The 4BONE BCH resorption properties enable predictable treatment outcomes.


121.



4BONE™ XBM - Anorganic Bovine

Bone Matrix


4B-X2505 4BONE XBM vial 0.5cc, granule size: 0.25-1mm




4B-X1010 4BONE XBM vial 1.0cc, granule size: 1-2mm

4B-X1025 4BONE XBM vial 2.5cc, granule size: 1-2mm

4BONE XBM is an anorganic bovine bone mineral matrix for use in guided bone regeneration procedures and is recommended for use as a bone void filler or augmentation material in periodontal defects and dental implant procedures. 4BONE XBM is produced by the removal of all organic components from bovine bone, leaving the natural mineral component for use as an osteoconductive material to support bone regeneration.

122.



BONDBONE® - Bonding Graft Material


BS-BB005 BONDBONE 0.5cc, 3 drivers

BS-BB010 BONDBONE 1cc, 3 drivers

BONDBONE is a novel synthetic bone graft material that can be used as an excellent binder or as a stand-alone graft. BONDBONE is composed of biphasic calcium sulfate, well-established and widely documented for its biocompatibility, osteoconductivity and bioresorbability. It is fast setting, with physical properties not affected by the presence of blood and saliva.


123.


4MATRIX - Bone Graft Cement


BS-4MX10 4MATRIX Bone Graft Cement, 1cc

4MATRIX Bone Graft Cement is an innovative synthetic bone grafting product developed to simplify dental bone grafting procedures. Composed of pure biphasic calcium sulfate and hydroxyapatite and characterized by a predetermined setting time, strength, and resorption rate, 4MATRIX is the preferred augmentation product for a wide variety of dental bone grafting procedures.

124.



4BONE™ RCM - Resorbable

Collagen Membrane

Barrier Membranes

BR-C1525 4BONE RCM membrane 15x25mm

BR-C2030 4BONE RCM Membrane 20x30mm

BR-C3040 4BONE RCM Membrane 30x40mm

4BONE RCM is engineered from porcine collagen. Due to its biocompatibility and low immunogenicity, porcine collagen has been successfully used in medical and dental procedures. 4BONE RCM is easy to trim, shape and adapt to the osseous defect and provides prolonged protection to enable sufficient quantity of bone to regenerate.


125.



4BONE™ RSB - Resorbable Collagen

Barrier Membrane

Barrier Membranes

4B-S1520 4BONE RSB membrane 15X20mm



4BONE RSB Resorbable Collagen Barrier Membrane, is a bioresorbable, cell occlusive membrane engineered from highly purified Type I bovine collagen. Due to its optimal initial rigidity and defined stability, 4BONE RSB prevents soft tissue ingrowth during healing in defects that lack bony wall support.

126.



4BONE™ RCB - Resorbable Conforming

Barrier Membrane

Barrier Membranes

4B-C1520 4BONE RCB membrane 15X20mm



4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. It is a versatile resorbable barrier membrane. Upon hydration, the barrier membrane easily adapts and conforms to all surgical sites.


127.



4BONE™ TAPE

Collagen Wound

Dressings

4B-T0010 4BONE TAPE Resorbable Collagen Tape

4BONE TAPE 10/box. Size: 2.5cm x 7.5cm, 1mm thick

4BONE TAPE is used following oral surgical procedures to aid in wound healing. The Tape is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.

128.



4BONE™ PLUG

Collagen Wound

Dressings

4B-P0010 4BONE PLUG Resorbable Collagen Plug

4BONE PLUG 10/box. Size: 1cm x 2cm

4BONE PLUG is used following oral surgical procedures to aid in wound healing. The plug is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.

BONE GRAFTING MATERIALS

COLLAGEN WOUND DRESSINGSBARRIER MEMBRANES

MIS MCENTER facilities offer a wide range of quality digital dentistry services, assisting doctors worldwide to increase both efficiency and quality of treatments they can offer their patients.

The MSOFT program creates a highly accurate preliminary implant placement plan, taking into consideration all aspects of the patient anatomy. Flexible prosthetic-driven planning can be done either by the clinician, or through our worldwide network of MCENTERs.

The MGUIDE surgical template open wire-frame design allows an open field of view during surgery, where anesthesia and irrigation are accessible from all angles without removing the template. MGUIDE surgical kits simplify the implantology process by eliminating the need for traditional guidance keys. Specially designed sleeves and drills stop at the precisely planned position and depth, freeing-up hands and saving valuable time.

MLAB CAD/CAM technology provides customized abutments, crowns, bridges and bars, in a range of materials such as Zirconia, Temp, Chrome Cobalt and Titanium.

MCENTER DIGITAL DENTISTRY.

132.

MGUIDE Custom Surgical Template


MGUIDE Custom Surgical Template

MGUIDE

MG-TMP20 MGUIDE individual surgical template for edentulous

MG-TMP10 MGUIDE individual surgical template

The guided surgical procedure is done using a highly accurate 3D printed template. The unique open wire-frame template design allows anesthesia and irrigation from all angles. In addition, raised flap surgery can more easily be performed.

132.

133.


MGUIDE Set for SEVEN Implant

Procedure



MGUIDE Set for SEVEN Implant Procedure

MGUIDE

MG-K001

MG-K001 MGUIDE set for SEVEN implant

The MGUIDE Set for SEVEN implants is designed for use with the MGUIDE surgical templates. The vides enhanced accuracy and safety for a smoother implant placement procedure. Drills are designed with built-in stoppers to allow correct preparation to the planned depth and position and no drill guidance keys are required. The ergonomic drill layout provides an easy to follow preparatory guideline for either hard or soft bone conditions.

133.

134.

MGUIDE SEVEN Set


MG-TP047 Ø4.7mmL=26mm MGUIDE tissue punch Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-TP055 Ø5.5mmL=26mm MGUIDE tissue punch Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-BM047 Ø4.7mmL=24.5mm MGUIDE bone mill Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-BM055 Ø5.5mmL=24.5mm MGUIDE bone mill Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-D0624 Ø2.4mmL=6mm MGUIDE pilot drill Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT


i46-49 STANDALONE

INSIDEKIT

MGUIDE SEVEN Set

MGUIDE

MG-K001

134.

135.


MGUIDE SEVEN Set



i46-49 STANDALONE

INSIDEKIT

MG-D1124 Ø2.4mmL=11.5mm MGUIDE pilot drill Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT


i46-49 STANDALONE

INSIDEKIT

MG-D0633 Ø2.2-3.2mmL=6mm

MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-D0833 Ø2.2-3.2mmL=8mm


i46-49 STANDALONE

INSIDEKIT

MG-D1033 Ø2.2-3.2mmL=10mm


i46-49 STANDALONE

INSIDEKIT

MG-D1133 Ø2.2-3.2mmL=11.5mm


i46-49 STANDALONE

INSIDEKIT

MG-D1333 Ø2.2-3.2mmL=13mm


i46-49 STANDALONE

INSIDEKIT

MG-D0637 Ø2.8-3.6mmL=6mm


i46-49 STANDALONE

INSIDEKIT

MG-D0837 Ø2.8-3.6mmL=8mm


i46-49 STANDALONE

INSIDEKIT

MG-D1037 Ø2.8-3.6mmL=10mm


i46-49 STANDALONE

INSIDEKIT

135.

136.

MGUIDE SEVEN Set


MG-D1137 Ø2.8-3.6mmL=11.5mm


i46-49 STANDALONE

INSIDEKIT

MG-D1337 Ø2.8-3.6mmL=13mm


i46-49 STANDALONE

INSIDEKIT

MG-D0642 Ø3.3-4.1mmL=6mm


i46-49 STANDALONE

INSIDEKIT

MG-D0842 Ø3.3-4.1mmL=8mm


i46-49 STANDALONE

INSIDEKIT

MG-D1042 Ø3.3-4.1mmL=10mm


i46-49 STANDALONE

INSIDEKIT

MG-D1142 Ø3.3-4.1mmL=11.5mm


i46-49 STANDALONE

INSIDEKIT

MG-D1342 Ø3.3-4.1mmL=13mm


i46-49 STANDALONE

INSIDEKIT

MG-D0650 Ø4.1-4.9mmL=6mm

MGUIDE conical drill for Ø5 implant Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-D0850 Ø4.1-4.9mmL=8mm


i46-49 STANDALONE

INSIDEKIT

MG-D1050 Ø4.1-4.9mmL=10mm


i46-49 STANDALONE

INSIDEKIT

MG-D1150 Ø4.1-4.9mmL=11.5mm


i46-49 STANDALONE

INSIDEKIT

136.

137.


MGUIDE SEVEN Set


MG-D1350 Ø4.1-4.9mmL=13mm


i46-49 STANDALONE

INSIDEKIT

MG-DLG55 Ø9.9mmL=55mm MGUIDE drill length gauge Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-GRI01 Ø7mmL=29.7mm

MGUIDE direct ratchet insertion tool, internal hex. Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-GRN01 Ø7mmL=29.7mm

MGUIDE direct ratchet insertion tool, internal hex., NP Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-GMI10 L=28.9mm MGUIDE motor insertion tool, internal hex. Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-GRI10 Ø7mmL=24.5mm

MGUIDE ratchet insertion tool, internal hex. Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

MT-HHR13 L=28mm Hand driver for 0.05 inch hex. Stainless steel See p. no. i46-49

STANDALONE

INSIDEKIT

MG-IE172 L=32.7mm MGUIDE insertion tool extractor, internal hex. Titanium See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-IE160 L=32.7mm MGUIDE insertion tool extractor, internal hex., NP Titanium See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-DFP20 Ø2mmL=35.3mm MGUIDE drill for fixation pin Stainless steel See p. no.

i46-49 STANDALONE

INSIDEKIT

137.

4Diameters

3.303.754.20

5

138.

MGUIDE SEVEN Set


MG-FP020 Ø2mmL=29mm MGUIDE fixation pin Titanium See p. no.

i46-49 STANDALONE

INSIDEKIT

MG-TAS55 Ø5.5mmL=24mm

MGUIDE template anchoring screw Titanium See p. no.

i46-49 STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

138.

139.


MGUIDE Kit for SEVEN Implant Narrow Sleeve


MG-N0624 Ø2.4mmL=6mm MGUIDE narrow pilot drill Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-N0633 Ø2.2-3.2mmL=6mm

MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-N0637 Ø2.8-3.6mmL=6mm


i50-51 STANDALONE

INSIDEKIT


i50-51 STANDALONE

INSIDEKIT

MG-N0833 Ø2.2-3.2mmL=8mm


i50-51 STANDALONE

INSIDEKIT

MG-N0837 Ø2.8-3.6mmL=8mm


i50-51 STANDALONE

INSIDEKIT


MGUIDE

MG-K002

Pending regulatory approvals

*

139.

140.




i50-51 STANDALONE

INSIDEKIT

MG-N1033 Ø2.2-3.2mmL=10mm


i50-51 STANDALONE

INSIDEKIT

MG-N1037 Ø2.8-3.6mmL=10mm


i50-51 STANDALONE

INSIDEKIT

MG-N1124 Ø2.4mmL=11.5mm MGUIDE narrow pilot drill Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-N1133 Ø2.2-3.2mmL=11.5mm


i50-51 STANDALONE

INSIDEKIT

MG-N1137 Ø2.8-3.6mmL=11.5mm


i50-51 STANDALONE

INSIDEKIT


i50-51 STANDALONE

INSIDEKIT

MG-N1333 Ø2.2-3.2mmL=13mm


i50-51 STANDALONE

INSIDEKIT

MG-N1337 Ø2.8-3.6mmL=13mm


i50-51 STANDALONE

INSIDEKIT

MG-NBM40 Ø4mm MGUIDE narrow bone mill Stainless steel See p. no. i50-51

STANDALONE

INSIDEKIT

MG-NTP40 Ø4mmL=26mm MGUIDE narrow tissue punch Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

140.

141.




MG-NLG40 Ø4mm MGUIDE narrow drill length gauge Titanium See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NMN10 Ø5mmL=30.4mm

MGUIDE narrow motor insertion tool, internal hex., NP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NMS10 Ø5mmL=28.9mm

MGUIDE narrow motor insertion tool, internal hex., SP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NRN01 Ø5.3mmL=29.5mm

MGUIDE narrow direct ratchet insertion tool, internal hex., NP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NRS01 Ø5.3mmL=24.7mm

MGUIDE narrow direct insertion tool, internal hex., SP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NRN10 Ø5.3mmL=25mm

MGUIDE narrow ratchet insertion tool, internal hex., NP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NRS10 Ø5.3mmL=24.5mm

MGUIDE narrow ratchet insertion tool, internal hex., SP Stainless steel See p. no.

i50-51 STANDALONE

INSIDEKIT

MG-NTAS0 Ø5.3mmL=24mm

MGUIDE narrow template anchoring screw Titanium See p. no.

i50-51 STANDALONE

INSIDEKIT

141.

142.

MGUIDE Kit for Universal Pilot Drills


MG-PBM24 Ø2.40mmL=24.5mm

MGUIDE universal pilot bone mill Stainless Steel See p. no.

i52-53 STANDALONE

INSIDEKIT

MG-P0624 Ø2.40mmL=6mm MGUIDE universal pilot drill Stainless Steel See p. no.

i52-53 STANDALONE

INSIDEKIT


i52-53 STANDALONE

INSIDEKIT


i52-53 STANDALONE

INSIDEKIT

MG-P1124 Ø2.40mmL=11.5mm MGUIDE universal pilot drill Stainless Steel See p. no.

i52-53 STANDALONE

INSIDEKIT


i52-53 STANDALONE

INSIDEKIT


MGUIDE

MG-K003

142.

0mm

13mm

Pilot Drills

13mm11.5mm

10mm8mm

6mm

5

143.




MG-FP020 Ø2mmL=29mm MGUIDE fixation pin Titanium See p. no.

i52-53 STANDALONE

INSIDEKIT

MG-DFP20 Ø2mmL=35.3mm MGUIDE drill for fixation pin Stainless steel See p. no.

i52-53 STANDALONE

INSIDEKIT

MG-PTAS0 Ø5.30mmL=25mm

MGUIDE universal template anchoring screw, Ø2.40mm Titanium See p. no.

i52-53 STANDALONE

INSIDEKIT


STANDALONE

INSIDEKIT

MT-RA480 - Ratchet to hex. adapter Stainless steel See p. no. i52-53

STANDALONE

143.

144.

CAD-CAM Ti-Base Single Tooth

Restoration


MN-TB001MD-TB001MW-TB001

H=4mmH=4mmH=4mm

Ti-Base, anti-rotation, internal hex. Titanium -WPSPNP

NPSPWP

MN-IN060MD-IN060

L=8.4mmL=8.6mm

Incisor esthetic Ti-Base, internal hex. Titanium -SPNP

NPSP

MN-SP102MD-SP102MW-SP102

H=10mmH=10mmH=10mm

Scan post, internal hex. Titanium -WPSPNP

NPSPWP

MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium -

MN-S0160MD-S0220MD-S0220



NPSPWP

GI-SCH11GI-SCH11GI-WCH11

- Burnout anti-rotation plastic cap for Ti-Base - -WPSPNP

NPSPWP

CAD-CAM Ti-Base Single

Tooth Restoration

MLAB

144.

145.


CAD-CAM Ti-Base Multiple Unit

Restoration


MN-TB002MD-TB002MW-TB002

H=4mmH=4mmH=4mm

Ti-Base, free rotation, internal hex. Titanium -WPSPNP

NPSPWP


H=10mmH=10mmH=10mm

Scan post, internal hex. Titanium -WPSPNP

NPSPWP

MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium -

MN-S0160MD-S0220MD-S0220



NPSPWP

CAD-CAM Ti-Base Multiple Unit Restoration

MLAB

145.

146.

Scan Post Internal Hex. Kit


MK-0056 - Scan post kit, internal hex. - See p. no. i54


H=10mmH=10mmH=10mm

Scan post, internal hex. Titanium See p. no. i54WPSPNP

NPSPWP

MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium See p. no. i54


MLAB

MK-0056

146.

147.


Titanium Blanks


MN-IB091MD-IB091MW-IB091

Ø9mmØ9mmØ9mm

Titanium Blank, anti-rotation, internal hex. Titanium See p. no. i55WPSPNP

NPSPWP


Ø12mmØ12mmØ12mm

Titanium Blank, anti-rotation, internal hex. Titanium See p. no. i55WPSPNP

NPSPWP

Titanium Blanks

MLAB

147.

For your convenience, the following section provides an added resource about products and processes that may require expanded explanations in the form of visuals, schematics, technical information or documentation.

ADDITIONAL INFORMATION.

For your convenience, the following section provides an addedresource about products and processes that may require expandedexplanations in the form of visuals, schematics, technical information or documentation.

ADDITIONAL INFORMATION.

MT-HLI10

MT-RKL21 MT-RKS15

MT-HSI10

MT-SRH20MT-LRH20

MT-NRH10

MT-RMR10

MC1-00330 MH-52330MH-53330MH-54330MH-55330MH-56330

2/3/4/5/6

Ø 4.3mm MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330

2/3/4/6/8mm

Ø 4mm

3/4/5mm

Ø 6.5mm

MH-W3500MH-W4500MH-W5500

3/4/5mm

Ø 5mm

MC1-00470

MH-03375MH-04375MH-05375MH-06375

3/4/5/6mm

Ø 4mm MH-53375MH-54375MH-55375MH-56375

3/4/5/6mm

Ø 5.5mm MC1-00375

3/4/5/6mm

Ø 4.8mm MH-A3375MH-A4375MH-A5375MH-A6375

MH-W3630MH-W4630MH-W5630

All Platforms

Surgical tools

Narrow Platform

Standard Platform

Wide Platform

Implant cover screws and healing caps

Long insertion tool, internal hex.

UNO One-Piece implant long key

UNO One-Piece implant short key

Short insertion tool, internal hex.

Short insertion tool,internal hex.


Long ratchet adapter, internal hex., NP

Long direct hand and ratchet key

*Anodized for SEVEN (The note is relevant for all screws)



i2

Refer to p: 6-37

1

2

3

1 3

2

1

2

3

Insertion tool and hand key adapter

Insertion tool for motor

Insertion tool in ratchet adapter

i3

Refer to p: 6-37

The innovative MIS packaging system is designed for simple and easy use. All of our implant boxes feature distinctive colors, large typeface, clear data labels and a pull tab for quick opening. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.

Packaging

Quick identification markings signify: implant diameter (top), implant length (middle) and implant platform (bottom).

Implant identification markings

Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.

Pull tab

Convenient pull tab facilitates easy, quick opening of the box during surgery.

i4

Refer to p: 6-37

Implant Label Colors:

Light Gray

Gray

Yellow

Red

Blue

Green

White

UNO One-Piece Ø3

UNO One-Piece Ø3.50

(Narrow) SEVEN, M4 Ø3.30

(Standard) SEVEN, M4 Ø3.75

(Standard) SEVEN, M4 Ø4.20

(Wide) SEVEN, M4 Ø5

(Wide) SEVEN, M4 Ø6

i5

Refer to p: 6-37


MIS MULTIFIXFixed Restoration for Atrophic Ridges

The system provides a comprehensive treatment plan of full-arch screw retained immediate restoration for edentulous patients.

Clinical SummaryMIS MULTIFIX procedure is performed by anterior straight placement of two implants and posterior tilted placement of two (long) implants. All four implants gain high stability from the denser bone at the anterior part of the jaw. The implants are immediately restored by Multi-Unit abutments, straight and 17o angulated, for optimal distribution of force and compensation of up to 30o angulation of the posterior implants, thanks to the unique insertion tool.

i6

Refer to p: 6-37

MK-0058

MIS MULTIFIX Drilling Set

for 18 and 20mm

MIS MULTIFIX Long Implants Drilling Set enables a full drilling procedure followed by placement of 18mm or 20mm Standard platform implants. Long implant placement is recommended for the posterior tilted implants when performing Fixed Restoration for Atrophic Ridges.

Kit Contents:MT-LBT24Long body try-in Ø2.40mm

MT-LBT28

MT-LBT32

MT-LBT38

Long body try-in Ø2.80mm



MT-ETD24Extra-long twist drill Ø2.4mm




i7

Refer to p: 6-37

MK-0059

Kit Contents:MT-BP320Bone profiler Ø3.2mm, internal hex., NP

MT-BGP32Bone profiler guide pin Ø3.2mm, internal hex., NP

MT-BP460Bone profiler Ø4.6mm, internal hex., WP

MT-BGP46MT BGP46Bone profiler guide pin Ø4.6mm, internal hex., WP

MT-BP370Bone profiler Ø3.7mm, internal hex., SP

MT-BGP37Bone profiler guide pin Ø3.7mm, internal hex., SP


Surgery may be followed by bone milling around the posterior tilted implants, for a uniform surface of the hard tissue, allowing an easy, an easy path of insertion and acuurate connection of the angulated Multi-Units. MIS Bone Profiler Kit provides a solution for all platforms.

i8

Refer to p: 6-37

D. E. F.

C.A. B.

MIS MULTIFIX Step-by-Step(Preparation of tilted implant site)

Connect the bone profiler to the hand-piece and place over the guided pin.

Prepare the osteotomy according to MIS drilling sequence. The posterior tilted long implants require the use of the long drilling set or the long final drill (for hard bone only), that supplied with each one of MIS implants.

Following the tilted implant placement, connect the bone profiler guided pin manually into the implant. A maximum torque of 10Ncm is recommended.

Perform milling of the bone surface sur-rounding the tilted implant. A maximum cutting speed of 200RPM is recommended.

Achieve an ultimate path of insertion for the angulated Multi-Unit abutment.

Connect the 17o Multi-Unit abutment to the tilted implant for immediate restoration.

i9

Refer to p: 6-37

MT-P2406

MT-P2416

MT-P2413

MT-P2411

MT-P2410

MT-P2408

Pilot Drills External Irrigation

6mm Depth

8mm Depth

10mm Depth

11.5mm Depth

13mm Depth

16mm Depth

i10

Refer to p: 38-58

MT-TDT32

MT-TDT40

MT-TDT45

MT-TDT50

MT-TDT28

6mm Depth

8mm Depth

10mm Depth

11.5mm Depth

13mm Depth

16mm Depth

SEVEN Twist Drills,External Irrigation

i11

Refer to p: 38-58

MT-TDN32

MT-TDN38

MT-TDN45

MT-TDN50

MT-TDN55

MT-TDN28

6mm Depth

8mm Depth

10mm Depth

11.5mm Depth

13mm Depth

16mm Depth

M4 Twist Drills,External Irrigation

i12

Refer to p: 38-58

MT-TDI32

MT-TDI38

MT-TDI40

MT-TDI28

MT-TDI45

MT-TDI50

MT-TDI55

SEVEN and M4 Short Twist Drills, External Irrigation

6mm Depth

8mm Depth

10mm Depth

11.5mm Depth

i13

Refer to p: 38-58

6mm

8mm

10mm

11.5mm

13mm

16mm

MT-TD320

MT-TD380

MT-TD400

MT-TD450

MT-TD500

MT-TD550

MT-TD280

SEVEN and M4 Twist Drills,

Internal Irrigation

Depth

Depth

Depth

Depth

Depth

Depth

i14

Refer to p: 38-58

Ratchets

MIS offers a line of uniquely designed ratchets, to simplify both prosthetic screw tightening and implant insertion, allowing an accurate and safe performance.MIS ratchets are high durability instruments with a unique mechanism that simplifies use and cleaning.

Controlled tightening torque of implant placement (30-75 Ncm). The recommended torque for implant placement is 35-60 Ncm.

The monoblock ratchet can be used for implant placement and tightening or loosening screws.

Controlled tightening torque of prosthetic screws (10-30Ncm).

MT-RI040

MT-RT070

MT-RI030

Torque Ratchet for prosthetic screws

Torque Ratchet for implant placement

Monoblock Ratchet

i15

Refer to p: 38-58

MK-EI48

3

4

5

6

7

8

20 21

22 27

26 28

29 31

30

34

9 10

14 15 16 17 18 19

11 12 13

1

2

{

23

{

24

25

32

33


The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant placement procedures. The kit is designed to enhance simplicity and safety; featuring a novel ergonomic design that follows the surgical drilling sequence for a more efficient procedure. A set of length-based pilot drills include color-coded visual indicators for both implant diameters and restorative platforms.

i16

Refer to p: 59-86

MT-BTT24

14

MT-BTT28

15

MT-BTT32

16

MT-BTT40

17

MT-BTT45

18

MT-GDN33

20

21

MT-GDN50

22

MT-NRH10

23

MT-PP240

MT-TDT45

12

MT-TDT50

13

MT-BTT50

19

MT-SMD10

1

MT-TDN19

2

MT-TDT28

9

MT-TDT32

10

MT-TDT40

11

MT-P2406

3

MT-P2408

4

MT-P2410

5

MT-P2411

6

MT-P2413

7

MT-P2416

8

24

MD-PF375

25

MN-PF330

MT-HLI10

26

MT-HSI10

27

MT-RDL30

33

30

MT-DE001

MT-LM005

32

28

MT-LRH20

MT-SRH20

29

31

MT-RMR10

34

MT-RT070MT-RT070

SEVEN Surgical Kit (MK-EI48)

Contents:

Torque Ratchet for implant placement

Long hex. drive for 0.05”

Long motor adapter for 0.05” hex.


Drill extender




Direct press fit for closed tray Narrow platform


Direct press fit for closed trayTwist drill Ø4.50mm external irrigation

Twist drill Ø5mm external irrigation

Body try-in Ø2.40mm



Body try-in Ø4mm


Body try-in Ø5mm

Countersink, Standard platform

Countersink, Wide platformTwist drill Ø2.80mm external irrigation

Pilot drill Ø2.40 height 16mm

Pilot drill with built-in stopper Ø2.40 height 11.5mm

Pilot drill with built-in stopper Ø2.40 height 13mm



Spade marking drill

Marking drill Ø1.90mm external irrigation


Long ratchet adapter, internal hex., Narrow platform

Parallel pin Ø2.40/Ø3mm

Twist drill Ø3.20mm external irrigation


i17

Refer to p: 59-86

MK-0016

1

2

3

4

56

7

8

9

21 22

14 16

1311 15 17

1210

{18

19

20


The M4 Surgical Kit contains the complete range of drills and tools required for a full implant placement procedure. The kit features a convenient tool layout and protective cover with an easy-opening mechanism for quicker access.

i18

Refer to p: 59-86

MT-SMD10

1

MT-TDN19

2

12

MT-LRH20

MT-SRH20

13

MT-RDL30

17

MT-LM005

16

MT-HSI10

11

MT-HLI10

10

MT-CSN33

19

MT-GDN33

20

MT-PP240

18

MT-DE001

14

MT-GDN50

21

22

MT-RI030

MT-P2416

3

MT-TDN32

5

MT-TDN28

4

MT-TDN38

6

MT-TDN45

7

MT-TDN50

8

MT-TDN55

9

15

MT-RMR10

M4 Surgical Kit (MK-0016)

Contents: Spade marking drill

Marking drill Ø1.90mm external irrigation












Drill extender

Long hex. drive for 0.05” hex.

Long motor adapter for 0.05" hex.


Countersink, Narrow platform

Parallel pin Ø2.40/3mm


Countersink, Wide platform

Monoblock Ratchet

i19

Refer to p: 59-86

MK-0014

MT-CSN33

MT-GDN50

MT-TDN28

MT-TDN38

MT-TDN32

MT-TDN45

MT-TDN50

MT-TDN55

MT-GDN33

M4 Drilling Set

In order to Make It Simple, the innovative M4 implants Drilling Set was designed as an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor has a full range of drills and tools necessary to complete both M4 and SEVEN implant placement procedures.

Kit Contents:

Countersink, Narrow platform


Countersink, Wide platform







i20

Refer to p: 59-86

MK-BH26

MT-BC280

MT-BC320

MT-BC380

MT-BC450

Ø2.80mm

Ø3.20mm

Ø3.80mm

Ø4.50mm


The Bone Harvest Kit enables simple and easy bone harvesting during surgery. The kit provides a revolutionary dual-action bone harvesting system while drilling; the harvested bone can be used elsewhere as needed. Drills can also be used as final drills.

Drill with a slight continuous pressure. While removing the drill, continue rotation to keep the bone inside the drill slots. Drills should not be used more than 30 times.

Recommended speed is between20-50 RPM without irrigation.

DrillColor-coded drill matches sleeve color.

Bone accumulates inside the drill slots during drilling.

Bone Harvest drills can be used as final drills while harvesting bone.

The Bone Harvest Kit can be used with MIS drill stoppers, to ensure a safe drilling procedure.

Kit Contents:Bone Harvest Kit includes:

Simple.

Easy.

Safe.

i21

Refer to p: 59-86

1

2

3

4

5

6

7

8

9

13

10

12

MK-0020

13mm 8mm10mm

13mm11


The Bone Compression Kit enhances primary stability in type 3 and type 4 bone. The gradual condensation process applied on the osteotomy walls prior to implant placement, results in increased bone density around the implant and thus, greater primary stability. In addition, the unique design of the compression screws allows for closed sinus augmentation procedures. The screws engage bone, applying an upwards vertical force to elevate the sinus floor, facilitating delivery of augmentation materials to the site.

i22

Refer to p: 59-86

13mm 8mm10mm

13mm

MT-HSI10

9

MT-HLI10

10

1

MO-CO160

2

MO-CO200

3

MO-CO240

4

MO-CO280

5

MO-CO300

6

MO-CO350

7

MO-CO400

MT-SRH20

12

11

MT-LRH20

MT-SMD10

8

13

MT-RI030

Bone Compression Kit (MK-0020)Contents:

Convex compression screw Ø1.8/2.9mm




Concave sinus screw Ø3mm

Concave sinus screw Ø3.5mm

Concave sinus screw Ø4mm

Spade marking drill





Monoblock Ratchet

Step-by-Step(Preparation of the implant site)

Marking with Spade Marking Drill Initial compression with Convex Compress Screw Ø1.8/2.9mm.

Gradual compression with Convex Compress Screw Ø2.3/3.3mm.

Insertion of the SEVEN implant MF7-13375. During insertion, the implant finalizes compression, providing higher initial stability.

i23

Refer to p: 59-86

MK-0036

1

89

2

65

3

6

4

10

7


UNO One-Piece implants are placed using specially designed tools thatfit the implant prosthetic part. The kit includes surgical drills, placement keys and a ratchet wrench.

i24

Refer to p: 59-86

MT-BTT20

5

6

MT-PP001

MT-SMD10

1

MT-TDN20

2

MT-UML21

7

MT-TDT30

4

MT-P2416

3

10

MT-RI030

MT-RKL21

9

MT-RKS15

8

A. B. C. D.

UNO One Piece Surgical Kit (MK-0036)

Contents:


Spade marking drill

Pilot Drill external irrigation


Body try-in Ø2mm

Parallel Pin Ø2.0/3.20mm L24mm

UNO One-Piece implant long motor adapter

UNO One-Piece implant long key

UNO One-Piece implant short key

Monoblock Ratchet

Step-by-Step(Implant taken out of vial)

i25

Refer to p: 59-86

MK-0039

22

1 2

43

5

8

7 9

10

12

13

14

16

15

1718

20

19

6

11

21

19


Designed for simplicity, MIS Prosthetic Tools Kits contains instruments for restorative procedures using MIS prosthetic components, for a wide range of prosthetic methods: implant level, abutment level, single or multiple units, cemented or screw restorations retained and overdentures. Kits feature logical, easy-to-follow protocol flow, color-coding and special markings to assist in economizing time and effort for restorative procedures.

i26

Refer to p: 59-86

MM-RSD15 MT-UW002

MT-US002MM-RSD20

MT-RDL30

MT-RDS30

CT-UW001

MT-UN002

MT-MURL2 CT-US001

1 12

2 13

3 14

4 15

516

6

MT-MUR02

17

CT-UN001

MT-RE172

7 18

MM-LCT10

MT-RE160

8

ET-IT001

MT-LM005

9 20

MT-UHD10

21

MT-URA10

22

MT-RI040

10

MT-SM005

MT-RB225

11

Prosthetic ToolsKit (MK-0039)

Contents:

Long locator torque wrench driver

Short locator torque wrench driver

Long hex. drive 0.05”

Short hex. drive 0.05”

Angulated Multi-Unit key

Straight Multi-Unit long ratchet key

Short motor adapter for 0.05” hex.

Implant analog for universal hand driver, internal hex., WP

Long motor adapter for 0.05” hex.

Int. connection abutment extractor, NP

Int. connection abutment extractor

Ball attachment anchor key

Implant analog for universal hand driver, conical conn., WP

Implant analog for universal hand driver, conical conn., WP

Implant analog for universal hand driver, conical conn., NP

Implant analog for universal hand driver, internal hex., NP

Implant analog for universal hand driver, internal hex., SP

Universal hand driver

19

OT Equator insertion tools

Locator core tool

Ratchet for prosthetic screws

Universal hand driver ratchet head adapter

i27

Refer to p: 59-86

MK-BS001

SEVEN Standard Platform Drill Stoppers Kit

Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Drill Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.

StoppersFour sleeves for each diameter in 8, 10, 11.5, and 13mm lengths, color-coded according to drills

BoxTray can be removed from the box for ease of use

Scale

Teflon OUT Insert

Teflon IN Insert

Kit Contents:

ØØ2.80 stoppers(for Ø3.75mm implants)

ØØ3.20 stoppers(for Ø4.20mm implants)

Easy.Color-coding for quick identification of the sleeve diameter.

Safe. Safe drilling to desired depth.

Clear. Clearly arranged depth sleeves for 13-8mm for two diameters: Ø2.8 and Ø3.2mm.

Quick, easy assembly.Simple.

i28

Refer to p: 59-86

MK-SDS06

MK-SDS08

MK-SDS10

MK-SDS11

MK-SDS13

8mm10mm

11.5mm

13mm

MK-SDS##

SEVEN Depth-Based

Drill Stopper Kits

Following the use of the MIS length-based pilot drills, the SEVEN Length-Based Drill Stoppers Kit enables safe and easy drilling to the exact desired depth. Five different Stopper Kits are available in lengths: 6, 8, 10, 11.5 and 13mm.

Box

Stoppers

Tray can be removed from the box for ease of use

Five sleeves 2.8, 3.2, 4, 4.5, and 5mm diameters, color-coded according to drills

Teflon IN Insert

Teflon OUT Insert

Scale

Desireddrilling depth

Easy.Color-coding for quick identification of sleeve diameter.

Safe. Safe drilling to desired depth.

Clear. Clearly arranged depth sleeves for Ø2.8mm - Ø5mm diameter drills.

Quick, easy assembly.Simple. For 6mm implants

For 8mm implants

For 10mm implants

For 11.5mm implants

For 13mm implants

i29

Refer to p: 59-86

MK-0011


The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.

Simple and logical

Stabilization

Ideal distance measurement from adjacent teeth

Variable distance options

Optimal parallelism

Screw

Spring

Ball

Location Pin

Before cleaning, the Location Pins must be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential in order to avoid erosion of the parts and to maintain efficient functioning of the system.

Location Pins Ø2mm

Short 10mm

Long 16mm

Location Pins Ø2.80mm

Short 10mm

Long 16mm

Extension Arms

6, 7, 8mm

9, 10, 11mm

12, 13, 14mm

Paralleling Pin 20mm

i30

Refer to p: 59-86

MK-DB01

MT-A4022

MT-B4018

MT-C3125MT-F2121

MT-K2023


The Zircon Diamond Burr Set consists of commonly used smooth diamond burrs, required for proper preparation of zircon abutments.

Kit Contents:

Diamond burr 2.20mm Diamond burr 2.50mmDiamond burr 2.10mm

Diamond burr 1.80mm Diamond burr 2.30mm

i31

Refer to p: 59-86

MK-0040

22

3

11

21

2

10

16

20

1

9

15

14

13

7

6

5

8

12

19

417

1823


The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient’s mouth or on implant-level master models. The titanium superstructures are color-coded, in accordance with MIS platform colors: purple for Standard and green for Wide.

i32

Refer to p: 59-86

1

2

3

4

5

6

7

15

16

17

19

18

20

21

9

8

10

11

12

13

14

22

23

1. 2. 3.

MD-CPK81-1

MD-CPK82-2

MD-CPK83-3

MD-CPK84-4

MD-CTP10-5

MD-MAC10-6

MD-P0030-7

MD-AN151-9

MD-A0010-8

MD-AN251-10

MD-A1510-11

MD-A2510-12

MD-P1530-13

MD-P2530-14

MW-CPK81-15

MW-CPK82-16

MW-CPK83-17

MW-CTP10-19

MW-CPK84-18

MW-MAC10-20

MW-AN151-21

MW-P1510-22

MD-GT190

Prosthetic Planning Kit (MK-0040)Contents:

Colored 1mm transgingival abutment, h. 8mm, SP




Colored Narrow profile cementing post

Colored Standard cementing post

Colored esthetic 3mm abutment, internal hex.

Colored 15o angulated abutment

Colored esthetic 1mm abutment, internal hex.

Colored 25o angulated abutment

Colored esthetic 15o 1mm angulated abutment internal, hex.

Colored esthetic 25o angulated 1mm abutment, internal hex.



Colored 1mm transgingival abutment, h. 8mm, WP

Colored 2mm transgingival abutment, h. 8mm ,WP


Colored direct conical titanium post, WP


Colored cementing post, WP

Colored 15o angulated abutment, WP

Colored Wide esthetic 15o 1mm angulated abutment, internal hex.

Guide pin for technician set

Abutment selection and restoration planning

i33

Refer to p: 59-86

MWH-M7559

MWH-CAL59

MWH2-STUB

MWH-M0131(230V)

MWH-M0132(115V)

MCU Control Unit

The MCU Control Unit is an intelligent drive unit for dental surgical applications, facilitating clean and simple operation. Exclusively designed and made by the W&H Group, the control unit is a highly practical, user-friendly and easily portable device. It offers a maintenance-free surgical micro-motor, advanced programming features, wide speed range, accurate torque control, user-friendly foot control, clearly visible display, integrated coolant pump and more. CE approved and FDA cleared for marketing, the MCU Control Unit is manufactured according to ISO: 9001 requirements and complies with the most stringent safety requirements for medical equipment.

MCU Accessories

Surgical contra-angle 20:1

Surgical contra-angle LED 20:1

Irrigation system 1/2 way

GreenPump ON / OFF

OrangeChange program

YellowChange motor direction

GrayStart motor

i34

Refer to p: 59-86

- Control Unit - Foot Pedal- Irrigation Support Rod- Rubber Motor Support- 3 Sterile Irrigation Tubes- Power Cord (2m)- MCU-MIS Control Unit User Manual- Micromotor and Cord Kit

The MIS MCU core kit comes with:

The motor features torque limitation for dental implantation (5-50 Ncm); wide speed range of 300-40,000 rpm; integrated coolant pump; maintenance-free.

The surgical micromotor features advanced functions such as: programing, working steps and low speed with high torque.

Exclusive design, highly practical and easily portable.

70 Ncm

Peformance is in line with modern clinical developments.

Outstanding simplicity. Clearly visible display panel and function buttons.

Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by CE, FDA and manufactured under ISO 9001:2008 regulations.

i35

Refer to p: 59-86

MK-PIC01

MK-PIC01


Prosthetic Inroduction Case

i36

Refer to p: 59-86

Pcs: Pcs: Pcs: Pcs:

MD-CPK421

4 MA-SA171

1 MA-S1480

5 MA-S2480

1 MA-S3480

1 MA-S4480

2 MB-AN152

2 MB-N2375

4 MA-SA301 1 MD-A0010

1 MD-A1510

2 MD-CP013

1 MD-CPH13

1 MW-AN151-21

1 MD-MAC10

1

1

ME-G001A

ME-G002A

ME-G003A1

ME-G004A1

ME-G005A1

MK-00011

MK-00401

ME-G006A1

ME-G007A6

MU-CP04812

MK-CPK421

MM-PBU1012

MM-TRU101

MT-NB22510

Plastic cylinder for Multi-Unit

Complete prosthetic kit, H2, C4, internal hex., SP

Plastic bar-ovoid

Titanium rider-ovoid

Ball attachment key

Maxilla - ball attachment - angulated and straight abutments

Mandible - Dolderbar over Multi-Unit abutments

Mandible - angulated and straight Multi-Unit abutments, full arch

Abutment holding system kit

Prosthetic planning kit

Full maxilla

Full mandible

Esthetic 1mm abutment, internal hex., SP

Esthetic 15°, 1mm angulated abutment, internal hex., SP

Direct plastic cylinder without hex., SP

Direct plastic cylinder with hex., SP

Colored 15° angulated abutment, internal hex., WP

Standard cementing post, SP

Maxilla - bridge and crown screw retained and angulated abutments

Transgingival 2mm abutment h.4mm, internal hex., SP

Multi-Unit 17° angulated abutment, Internal hex., SP

Multi-Unit 1mm abutment, internal hex., SP




Ball anchor 15° angulated 2mm abutment, internal hex., SP

Ball anchor 2mm abutment, internal hex., SP

Multi-Unit 30° angulated abutment, internal hex., SP

Kit Contents:

Mandible - CPK, MAC10 and Esthetic abutments

i37

Refer to p: 59-86

MD-A1510

7mm

1mm

8mm

Ø5.20mm

3.50

2.40

8mm

1mm

MD-A2510

7mm

Ø5.60mm

8mm7mm

MD-P2530

3mm

Ø5.60mm

3.50

2.40

3.30

3.30

MD-CTP10

8.5mm8.5

Ø3.75mm

MD-MAC10

11mm11

Ø4.75mm

MD-WMAC1

11mm

Ø5.50mm

MD-MACF1

11mm

Ø4.80mm

8mm

3mm

7mm

MD-P1530

Ø5.20mm

Ø5.60mm

8mm

1mm

7mm

Ø3.40mm

MD-A0010

8mm

3mm

7mm

MD-P0030

Ø5.60mm

Ø3.40mm

MD-AN151

1.5mm

7.5mm

Ø5.20mm

6.6mm

Ø2.80mm

Ø5.90mm

MD-AN251

1.6mm

6.9mm 6.1mm6

Ø3.30mm

2.40

2.80

Cemented Restoration Options

Esthetic abutments 0º

Angulated abutments 15ºEsthetic angulated abutments 15º

Angulated abutments 25ºEsthetic angulated abutments 25º

Standard abutments

i38

Refer to p: 93-101

MD-CPK61

1

1

3

52 4 6

MD-RSM60

2

MM-CHC60

3

MD-IC800

4

MD-IC040

5

MD-ICH40

6

MD-CPK81*MD-CPK82*MD-CPK83*MD-CPK84*




The Complete Prosthetic Kit (CPK) is a comprehensive set designed for the full restoration of parallel inserted implants and restoration of a single implant case. The CPK includes all required components for the fabrication of cement retained restorations: an abutment, impression cap, comfort cap, casting sleeves and an analog.

Transgingival 1mm abutment, h.6mm, SP

Abutment analog, h.6mm, SP

Plastic healing cap, h.6mm, SP

Direct impression coping, h. 8mm, SP

Burnout plastic cap, SP

Burnout anti-rotation plastic cap, SP

Contents:

All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MD-ICH40).

Anatomic transgingival abutments, SP

C=8mm H=1,2,3,4mm

C=6mm H=1,2,3,4mm

C=4mm H=1,2,3,4mm

i39

Refer to p: 93-101

OE-RSM60

OE-IC001

OE-IC002

ET-IT001

MT-SRA10

MT-LM005

MT-SM005

OE-RCY01

OE-RCP01

OE-RCW01

OE-RCV01

OE-RCB01

OT-Equator

OT-Equator laboratory cap (black)

Metal housing

Laboratory Use:

OT-Equator cap (2.7kg)High retention (violet)

OT-Equator cap (1.8kg)Standard retention (white)

OT-Equator cap (1.2kg)Soft retention (pink)

Extra soft retention (yellow)

Metal housing

Clinical Use:

OT-Equator cap (0.6kg)

OT-Equator Tools

Long motor adapter for 0.05" hex.

Short motor adapter for 0.05" hex.

Square connection to ratchet adapter

OT-Equator analog

OT-Equator impression transfer cap

OT-Equator impression coping cap

OT-Equator handling tools

i40

Refer to p: 107-117

1.7mm2.6mm

Ø2.5mm

2mm

1.7mm

Ø2.5mm

4mm

1.7mm

Ø2.5mm

1mm

1.7mm

Ø2.5mm

3mm

1.7mm

Ø2.5mm

5mm

1.7mm

Ø2.5mm

5mm

1.7mm

3mm

Ø2.5mm

1.7mm

1mm

1.7mm

Ø2.5mm

Ø2.5mm

1mm

1.7mm 4mm

Ø2.5mm

1.7mm

5mm

Ø2.5mm

1.7mm

2mm

Ø2.5mm

1.7mm

3mm

Ø2.5mm

1.7mm

Narrow Platform

OT-Equator Abutments

Standard Platform

Wide Platform

Low Profile

Ball AttachmentOT-Equator

i41

Refer to p: 107-117

1-5mm

4.8mm

2mm

21°

17°

2.10mm

2.75mm 1mmH

^

^

^

^

75°

^

^

^

^

100°

^

^

^

^

40°

Multi-Unit System

Insertion Path:

17º Multi-Unit abutments can be used with implants with divergence of up to 75º.

30º Multi-Unit abutments can be used with implants with divergence of up to 100º.

Insertion Path:

Straight Multi-Unit abutments can be used with implants with divergence of up to 40º.

Solutions for extreme situations

Clinical Summary

Straight Multi-Unit Abutments. Simple and easy to use, straight Multi-Unit abutments provide screw-retained restorative solutions for every clinical scenario in which implants with a divergence of up to 40º are used. Designed to fit all MIS implant connection types for optimal fit between abutment seat and implant connection.

Angulated Multi-Unit Abutments.The perfect solution in cases where angulation correction is required, angulated Multi-Unit abutments are simple and easy to use.

Internal Hex. Connection

Internal Hex. Connection

i42

Refer to p: 102-106

MB-AN152

3mm

1.7mm

Ø4.6

MB AN152

m15°

1.7mm

Ø4.6

3.5mm25°

MB-AN252^

^

30°

15°^^ ^̂15°

^ ^

50°

25° 25°^^ ^̂

Angulated Ball Attachments

Solutions for extreme situations

Clinical Summary

Place the ball anchor angulated abutment (15°/25°) on the implant using the gripping bar. To screw the abutment to the implant, position the hand hex. driver (MT-HHR13 / MT-RDL30) through the gripping bar opening. Recommended tightening moment is 30 Ncm.

15º ball attachments canbe used with implants withdivergence of up to 30º.

25º ball attachments canbe used with implants withdivergence of up to 50º.

Ball Ø2.25 Ball Ø2.25

i43

Refer to p: 107-117

4BONETM RANGE PACKAGING

Optimal volumes and quality of hard and soft tissue are required to satisfy the goals of oral rehabilitation and implant dentistry. MIS offers a range of regenerative materials for dental use aimed at providing solutions for a wide variety of clinical needs. MIS regenerative products are available in varying volumes and sizes for simple and easy delivery directly to the surgical site. The selection of regenerative solutions offered by MIS allows clinicians to choose the precise products necessary to obtain the optimal surgical outcome.

i44

Refer to p: 120-123

i45

Refer to p: 120-123

1 3

2 4

6

7

8

9

10

15

20

25

21

22

23

24

16

17

18

19

11

12

13

14

5

26

27

28

29

30

MG-K001

MGUIDE Set for SEVEN Implant

Procedure

i46

Refer to p: 132-143

MG-D1033

12

MG-D1133

13

MG-D0833

11

MG-D1333

14

MG-D0624

5

MG-TP047

1

MG-BM047

33

MG-BM055

4

MG-TP055

2

MG-D0633

10

MG-D0824

6

MG-D1024

7

MG-D1124

8

MG-D1324

9

MG-D1337

19

MG-D0642

20

MG-D0637

15

MG-D0837

16

MG-D1037

17

MG-D1137

18

MG-D0842

21

MG-D1042

22

MG-D1142

23

MG-D1342

24

MG-D0650

25

MG-D0850

26

MG-D1050

27

MG-D1150

28

MG-D1350

29

30

MG-DLG55

Kit Contents:MGUIDE Drill Kit for SEVEN implant procedure

MGUIDE pilot drill Ø2.40 L6mm

MGUIDE tissue punch Ø4.7mm

MGUIDE bone mill Ø4.7mm

MGUIDE bone mill Ø5.5mm

MGUIDE tissue punch Ø5.5mm



MGUIDE pilot drill Ø2.40 L11.5mm


MGUIDE conical drill for Ø3.30 implant L10mm

MGUIDE conical drill for Ø3.30 implant L11.5mm














MGUIDE conical drill for Ø5 implant L6mm



MGUIDE conical drill for Ø5 implant L11.5mm


MGUIDE drill length gauge Ø5.5mm

i47

Refer to p: 132-143

NP

NP

SPARE

MO

TOR INSERT. T

OO

L

DIR

ECT INSERT. T

OO

LS

EXTRACTORS

RATCHET INSERT. T

OO

L

HA

N

D SCREW DRIVE

R

34

FIXATION DRILL ø2

FIXATION & ANCHORING TOOLS

FIXATION PINS TEMPLATE ANCHORING SCREWS

INTERNAL HEXAGONTOOLS

9

1

5

6

4

{{

{10 11

2

3

87

MGUIDE Tool Kit for Internal Hex.

i48

Refer to p: 132-143

MG-FP020

10

MG-DFP20

9

MG-TAS55

11

MT-HHR13

5

MG-GRI10

4

MG-GRN01

2

MG-GRI01

1

MG-GMI10

3

MT-RI030

8

MG-IE172

6

MG-IE160

7

MG-TAS56

Kit Contents:MGUIDE tool kit for int. hex.

Long hand screwdriver for 0.05" hex.

MGUIDE direct ratchet insertion tool, internal hex.

MGUIDE direct ratchet insertion tool, internal hex., NP

MGUIDE motor insertion tool, internal hex.

MGUIDE ratchet insertion tool, internal hex.

Additional Tool:

MGUIDE flat template anchoring screw, Ø5.5mm

MGUIDE drill for fixation pin, Ø2 mm

Monoblock Ratchet MGUIDE fixation pin, Ø2mm

MGUIDE template anchoring screw, Ø5.5mm

MGUIDE insertion tool extractor, internal hex., NP

MGUIDE insertion tool extractor, internal hex.

i49

Refer to p: 132-143

MG-K002

{ { {24

1

2

3

4

8

9

10

11

12

13

14

15

16

17

18

20 21

22

25

23

19

5

6

7

MGUIDE Kit for SEVEN Implant, Narrow Sleeve

The MGUIDE Kit for SEVEN Implant, Narrow Sleeve, is designed to offer an ideal solution for clinical situations that require the use of Narrow implants, such as narrow spaces between anterior teeth or cases of smaller jaws. The kit contains all drills and tools required to place Ø3.30 and Ø3.75mm implants only.

i50

Refer to p: 132-143

MG-NRN10

20

MG-NRS10

21

MG-NMN10

22

MG-NMS10

23

MG-NTAS0

24

MG-NLG40

25

MG-N1333

12

MG-NTAS1

MG-NRS01

19

MG-N0637

13

MG-N1133

11

MG-N0837

14

MG-N1037

15

MG-N1137

16

MG-N1337G 337

17

MG-NRN01

18

MG-N1024

5

MG-NTP40

1

MG-N0624

3

MG-N0824

4

MG-NBM40

2

MG-N1033

10

MG-N1124

6

MG-N1324

7

MG-N0633

8

MG-N0833

9

Kit Contents:MGUIDE SEVEN for Narrow Sleeve

Additional Tool:

MGUIDE narrow flat template anchoring screw Ø4mm

MGUIDE Narrow conical drill for Ø3.30 implant L13mm

MGUIDE Narrow conical drill for Ø3.30 implant L11.50mm


MGUIDE Narrow pilot drill Ø2.40 L13mm




MGUIDE Narrow tissue punch Ø4mm



MGUIDE Narrow bone mill Ø4mm

MGUIDE Narrow pilot drill Ø2.40 L11.50mm




MGUIDE Narrow conical drill for Ø3.75 implant L11.50mm


MGUIDE Narrow direct ratchet insertion tool, internal hex., NP

MGUIDE Narrow direct ratchet insertion tool, internal hex., SP

MGUIDE Narrow ratchet insertion tool, internal hex., NP

MGUIDE Narrow ratchet insertion tool, internal hex., SP

MGUIDE Narrow motor insertion tool, internal hex., NP

MGUIDE Narrow motor insertion tool, internal hex., SP

MGUIDE Narrow template anchoring screw Ø4mm

MGUIDE Narrow drill length gauge Ø4mm

i51

Refer to p: 132-143

160.

34

SPARE

FIXATION DRILL ø2

FIXATION & ANCHORING TOOLS

FIXATION PINS

BONE MILL

6mm 8mm 10mm 11.5mm 13mm

PILOT DRILLS ø2.40

TEMPLATE ANCHORING SCREWS

UNIVERSALKIT

91

2 6

7 { {3 4 5

8

10

MG-K003


The Universal Surgical Kit for guided implant procedures is suitable for all MIS implant models. The kit is used for first-stage implantation procedures: Ø2.4mm pilot drills in a range of lengths and both horizontal and vertical fixation pins.

i52

Refer to p: 132-143

MG-P1124

5

MG-P1024

4

MG-P0824

MG-P0624

MG-PBM24

1

2

3

6

MG-P1324

9

MG-FP020

MG-PTAS0

8

MG-DFP20

10

7

MT-RI030

Kit Contents:MGUIDE Kit for Universal Pilot Drills

Universal pilot drill Ø2.40 L10mm



Universal pilot bone mill Ø2.40mm Universal pilot drill Ø2.40 L11.50mm


Fixation pin Ø.2mm

Drill for fixation pin Ø.2mm

Universal template anchoring screw Ø2.40mm

Monoblock Ratchet

The surgical kit can be fully sterilized using pre-vacuum autoclave at 134°C (273°F) for 6 minutes. After mechanical or clinical cleaning, all surgical instruments must be sterilized in an autoclave at 134°C (273°F) for 6 minutes. Do not exceed 134°C. Never use dry sterilizers.

i53

Refer to p: 132-143

MK-0056

The Scan Posts, with patent pending design features, offer superior surface quality, allowing easy scanning and unique geometry with well-defined flat surfaces for easy placement and optimum accuracy. No spraying or pre-scanning needed. Suitable for both Intra Oral and desktop scanning.

Lingual Buccal

MN-SP102 MD-SP102MW-SP102 MU-SP102

Kit Contents:

Scan post, internal hex., NP Scan post, internal hex., SPScan post, internal hex., WP Scan post for Multi-Unit


i54

Refer to p: 144-147


MN-MAB10MD-MAB10MW-MAB10


Titanium Blanks

The Titanium Blanks with a pre-milled interface are available for internal hex. and conical conn. implants, for all platforms. Each interface is available in two diameters - 9mm and 12mm.

Compatible analogs* are required for the Titanium Blanks

*Titanium Blanks must be ordered with the analog.

Ø9mm Titanium Blanks are intended for a shorter milling time

Ø12mm Titanium Blanks are intended to fit to most customized designs

Titanium Blank Ø9mm, anti-rotation, internal hex., NPTitanium Blank Ø9mm, anti-rotation, internal hex., SPTitanium Blank Ø9mm, anti-rotation, internal hex., WP

Milling analog for Titanium Blank, internal hex., NPMilling analog for Titanium Blank, internal hex., SPMilling analog for Titanium Blank, internal hex., WP

Titanium Blank Ø12mm, anti-rotation, internal. hex., NPTitanium Blank Ø12mm, anti-rotation, internal hex., SPTitanium Blank Ø12mm, anti-rotation, internal hex., WP

Titanium Blanks Analogs

i55

Refer to p: 144-147

160.

0.08

0.013

5.5-6.5

Alloy Composition

Gold-eMaterialTitanium Alloy Ti 6Al 4V ELI Gold-a Gold-s

Application C, K L, G, K L, G, K L, K

Composition

Hardness

Balance

Balance

Balance

Legend: C–bonding K–resin L–soldering G–casting onto

Soft annealing HV5

Hardened HV5

Soft Co / min

Melting range Co

V

AI

H (max)

N (max)

O (max)

Fe (max)

C (max)

Ti (max)

Ir %

Zn %

Cu %

Pd %

Ag %

Pt %

Au %

Hardened Co / min

i56

161.

MD-P1530MD-P2530

MD-MAC10MD-WMAC1

MD-MACF1MD-A0010MD-P0030

MD-CPK41MD-CPK42MD-CPK43MD-CPK44MD-CPK61MD-CPK62

MD-CPK63MD-CPK64MD-CPK81MD-CPK82MD-CPK83MD-CPK84

MD-A1510MD-A2510

MD-CTP10 MD-AN151MD-AN251

MD-GPC10MD-GP010

Restorative Components

Guidelines for usage ofMIS Restorative Components

Location Anterior MaxillaAnterior Mandible Canine, Premolars and Molars

Premolars and Molars

Crown/ Implant

Inclination Ratio

Gingival Height

Catalog Number

Abutment description

Esthetic angulated abutment

Standard post abutment

Friction fit post with platform switching

Esthetic abutment

Transgingival abutmentEsthetic angulated abutment

Conical post abutment

Angulated abutment

Screw-retained gold-plastic/CC abutment

Adjustable, based on abutment preparation

According to gingival height available in heights of 1,2,3,4mm

Up to 2mm buccalUp to 4mm lingual

Up to 2mm

Up to 4° 15° or 25° 15° or 25°

Up to 4mm buccal Up to 6mm palatal


Up to 2mm buccal Up to 6mm lingual/palatal


Up to 2.5° Up to 3.5° 15° or 25°

Up to 2mm buccal Up to 4mm palatal

*Recommendation only

i57

162.

Tube cap is marked with a distinctive color-coded label that indicates the diameter, length and platform of the implant.

Diameter and Platform

Color-Coding

Color codes:

Narrow platform

Standard platform

Wide platform

Implant platform(Standard/Wide/Narrow/

and One-Piece)

Implant diameter (mm)

Implant length (mm)

i58

163.

Label Description

Naming and labeling explanations

Date of manufactureUse-by date

Lot no.Qty.

Catalog no.

Barcode

Type of implant & connection

CE mark

Type of implant & connection

Catalog number

Lot no.

Use-by date

Date of manufacture

Implant diameter & length

Three labels are included between the inner and outer tubes. Labels specify product catalog number, lot number and use-by date.

i59

Only

Manufacturer

Sterilized using gamma irradiation

Catalog number

Sale by or on the order of a licensed dentist

Non-sterile

Attention, see instructions for useSingle use

European conformity mark

Do not use if package is damaged

Do Not Resterilize

Use-by date

Upper limit of temp.

Temp. limitation

Batch code

Date of manufacture

20%

90%

80%

50%

MIS ManualsSymbol Index

INDEX.

Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page

4B4B-C1520 126 i44-454B-C2030 126 i44-454B-C3040 126 i44-454B-P0010 128 i44-454B-S1520 125 i44-454B-S2030 125 i44-454B-S3040 125 i44-454B-T0010 127 i44-454B-X1010 121 i44-454B-X1025 121 i44-454B-X2505 121 i44-454B-X2510 121 i44-454B-X2525 121 i44-454B-X2540 121 i44-45

BRBR-C1525 124 i44-45BR-C2030 124 i44-45BR-C3040 124 i44-45

BSBS-4BS01 120 i44-45BS-4BS1S 120 i44-45BS-4BS25 120 i44-45BS-4MX10 123 BS-BB005 122 i44-45BS-BB010 122 i44-45

CTCT-UN001 80 i26-27CT-US001 80 i26-27CT-UW001 80 i26-27

ETET-IT001 58/80/108 i40-41

GIGI-SCH11 144 GI-WCH11 144

MAMA-N1480 104 i42MA-N2480 104 i42MA-N3480 104 i42MA-N4480 104 i42MA-S1480 104 i42MA-S2480 104 i42MA-S3480 104 i42MA-S4480 104 i42MA-S5480 104 i42MA-SA171 104 i42MA-SA301 105 i42MA-W1480 104 i42MA-W3480 104 i42MA-W5480 104 i42


MBMB-AN152 110 i43MB-AN252 111 i43MB-DB235 112 i43MB-DMH10 111 i43MB-GPS10 111 i43MB-N1375 110 i43MB-N2375 110 i43MB-N3375 110 i43MB-N4375 110 i43MB-N5375 110 i43MB-NZL00 113 MB-NZL01 113 MB-NZL02 113 MB-NZL03 113 MB-NZL04 113 MB-NZL05 113 MB-NZL06 114 MB-PPC10 111 i43MB-PPR10 111 i43MB-PR010 111 i43MB-RS375 111 i43MB-SF200 111 i43MB-SZL00 113 MB-SZL01 113 MB-SZL02 113 MB-SZL03 113 MB-SZL04 113 MB-SZL05 113 MB-SZL06 114 MB-TBS10 111 i43MB-TBS20 111 i43MB-TTP10 111 i43MB-WZL00 113 MB-WZL01 113 MB-WZL02 113 MB-WZL03 113 MB-WZL04 113 MB-WZL05 113 MB-WZL06 114

MDMD-A0010 93 i38MD-A1510 93 i38MD-A2510 94 i38

MD-AN151 93 i38MD-AN251 94 i38MD-CC010 103 MD-CCI10 103 MD-CP013 102 MD-CP050 102 MD-CPH13 102 MD-CPH50 102 MD-CPK41 98 i39MD-CPK42 98 i39MD-CPK43 98 i39MD-CPK44 98 i39MD-CPK61 98 i39MD-CPK62 99 i39MD-CPK63 99 i39MD-CPK64 99 i39MD-CPK81 99 i39MD-CPK82 99 i39MD-CPK83 99 i39MD-CPK84 99 i39MD-CTP10 95 MD-G0213 90 MD-G0220 94/96/103 i38MD-GP010 102 MD-GP100 90 MD-GPC10 102 MD-I0375 90 MD-IB091 147 i55MD-IB121 147 i55MD-IN060 144 MD-IT100 90 MD-IT300 90 MD-MAC10 95 MD-MACF1 95 MD-P0030 93 i38MD-P1530 93 i38MD-P2530 94 i38MD-PF375 62/91 i16-17MD-RSM10 91 MD-S0200 94/95/103 i38MD-S0220 94/95/103/144/145 i38MD-S0222 94/96/103 i38MD-S0224 94/96/103 i38MD-SP102 144/145/146 i54MD-TB001 144 MD-TB002 145 MD-TC013 92 MD-TCH13 92 MD-TPA10 92 MD-TPA12 92 MD-TPH50 92 MD-WMAC1 95


MFMF4-06420 27 i2-5MF4-06500 29 i2-5MF4-06600 31 i2-5MF4-08375 25 i2-5MF4-08420 27 i2-5MF4-08500 29 i2-5MF4-08600 31 i2-5MF4-10330 23 i2-5MF4-10375 25 i2-5MF4-10420 27 i2-5MF4-10500 29 i2-5MF4-10600 31 i2-5MF4-11330 23 i2-5MF4-11375 25 i2-5MF4-11420 27 i2-5MF4-11500 29 i2-5MF4-11600 31 i2-5MF4-13330 23 i2-5MF4-13375 25 i2-5MF4-13420 27 i2-5MF4-13500 29 i2-5MF4-13600 31 i2-5MF4-16330 23 i2-5MF4-16375 25 i2-5MF4-16420 27 i2-5MF4-16500 29 i2-5MF7-06420 11 i2-5MF7-06500 13 i2-5MF7-06600 15 i2-5MF7-08375 9 i2-5MF7-08420 11 i2-5MF7-08500 13 i2-5MF7-08600 15 i2-5MF7-10330 7 i2-5MF7-10375 9 i2-5MF7-10420 11 i2-5MF7-10500 13 i2-5MF7-10600 15 i2-5MF7-11330 7 i2-5MF7-11375 9 i2-5MF7-11420 11 i2-5MF7-11500 13 i2-5MF7-11600 15 i2-5MF7-13330 7 i2-5MF7-13375 9 i2-5MF7-13420 11 i2-5MF7-13500 13 i2-5MF7-13600 15 i2-5MF7-16330 7 i2-5MF7-16375 9 i2-5MF7-16420 11 i2-5MF7-16500 13 i2-5

MF7-18375 17 i6MF7-18420 17 i6MF7-20375 17 i6MF7-20420 17 i6

MGMG2-06160 37 MG2-08160 37 MG2-10160 37 MG2-12160 37 MG-BM047 134 i46-49MG-BM055 134 i46-49MG-D0624 134 i46-49MG-D0633 135 i46-49MG-D0637 135 i46-49MG-D0642 136 i46-49MG-D0650 136 i46-49MG-D0824 134 i46-49MG-D0833 135 i46-49MG-D0837 135 i46-49MG-D0842 136 i46-49MG-D0850 136 i46-49MG-D1024 135 i46-49MG-D1033 135 i46-49MG-D1037 135 i46-49MG-D1042 136 i46-49MG-D1050 136 i46-49MG-D1124 135 i46-49MG-D1133 135 i46-49MG-D1137 136 i46-49MG-D1142 136 i46-49MG-D1150 136 i46-49MG-D1324 135 i46-49MG-D1333 135 i46-49MG-D1337 136 i46-49MG-D1342 136 i46-49MG-D1350 137 i46-49MG-DFP20 137/143 i52-53MG-DLG55 137 i46-49MG-FP020 138/143 i52-53MG-GMI10 137 i46-49MG-GRI01 137 i46-49MG-GRI10 137 i46-49MG-GRN01 137 i46-49MG-IE160 137 i46-49MG-IE172 137 i46-49MG-K001 133/134 i46-49MG-N0624 139 i50-51MG-N0633 139 i50-51MG-N0637 139 i50-51MG-N0824 139 i50-51MG-N0833 139 i50-51


MG-N0837 139 i50-51MG-N1024 140 i50-51MG-N1033 140 i50-51MG-N1037 140 i50-51MG-N1124 140 i50-51MG-N1133 140 i50-51MG-N1137 140 i50-51MG-N1324 140 i50-51MG-N1333 140 i50-51MG-N1337 140 i50-51MG-NBM40 140 i50-51MG-NLG40 141 i50-51MG-NMN10 141 i50-51MG-NMS10 141 i50-51MG-NRN01 141 i50-51MG-NRN10 141 i50-51MG-NRS01 141 i50-51MG-NRS10 141 i50-51MG-NTAS0 141 i50-51MG-NTP40 140 i50-51MG-P0624 142 i52-53MG-P0824 142 i52-53MG-P1024 142 i52-53MG-P1124 142 i52-53MG-P1324 142 i52-53MG-PBM24 142 i52-53MG-PTAS0 143 i52-53MG-TAS55 138 i46-49MG-TMP10 132 MG-TMP20 132 MG-TP047 134 i46-49MG-TP055 134 i46-49

MKMK-0056 146 i54MK-CPK41 97 i39MK-CPK42 97 i39MK-CPK43 97 i39MK-CPK44 97 i39MK-CPK61 97 i39MK-CPK62 97 i39MK-CPK63 98 i39MK-CPK64 98 i39MK-CPK81 98 i39MK-CPK82 98 i39MK-CPK83 98 i39MK-CPK84 98 i39MK-DB01 84 i31MK-NIC6 100 MK-NIZ6 100 MK-NPK41 97 i39MK-NPK42 97 i39

MK-NPK43 97 i39MK-NPK44 97 i39MK-NPK61 97 i39MK-NPK62 97 i39MK-NPK63 98 i39MK-NPK64 98 i39MK-SDS06 71 i29MK-SDS08 71 i29MK-SDS10 71 i29MK-SDS11 71 i29MK-SDS13 71 i29MK-SIC6 100 MK-SIZ6 100 MK-SOE1 108 i40-41MK-SOE2 108 i40-41MK-SOE3 108 i40-41MK-SOE4 108 i40-41MK-SOE5 108 i40-41MK-SPC4 101 MK-SPZ4 101 MK-WPC4 101 MK-WPK41 97 i39MK-WPK42 97 i39MK-WPK43 97 i39MK-WPK44 97 i39MK-WPK61 97 i39MK-WPK62 97 i39MK-WPK63 98 i39MK-WPK64 98 i39MK-WPK81 98 i39MK-WPK82 98 i39MK-WPK83 98 i39MK-WPK84 98 i39MK-WPZ4 101

MMMM-GB100 117 MM-GBU10 116 MM-GRU10 116 MM-LBP10 115 MM-LCT10 57/78/114 i26-27MM-LEL10 114 MM-LELE1 114 MM-LER10 114 MM-LFA40 114 MM-LIC10 114 MM-LLR10 114 MM-LMP02 114 MM-LPP10 114 MM-LRM10 114 MM-LSD15 115 MM-LSD21 115


MM-PBU10 116 MM-PC100 117 MM-RSD15 57/79/115 i26-27MM-RSD20 57/79/115 i26-27MM-TC100 117 MM-TRU10 116

MNMN-AN020 93 i38MN-CP013 102 MN-CPH13 102 MN-G0160 90 MN-GP010 102 MN-GP100 90 MN-GPC10 102 MN-I0330 90 MN-IN060 144 MN-IT100 90 MN-IT300 90 MN-PF330 62/91 i16-17MN-RSM10 91 MN-S0160 94/95/103/144/145 i38MN-SP102 144/145/146 i54MN-TC013 92 MN-TCH13 92 MN-TPA10 92 MN-TPA12 92

MOMO1-10300 33 i2-5MO1-10350 35 i2-5MO1-11300 33 i2-5MO1-11350 35 i2-5MO1-13300 33 i2-5MO1-13350 35 i2-5MO1-16300 33 i2-5MO1-16350 35 i2-5MO-CO160 72 i22-23MO-CO200 72 i22-23MO-CO240 72 i22-23MO-CO280 72 i22-23MO-SO300 72 i22-23MO-SO350 72 i22-23

MO-SO400 73 i22-23

MTMT-00400 49 MT-00500 49 MT-00600 49 MT-A4022 84 i31MT-AL005 55 MT-B4018 84 i31MT-BC280 77 i21MT-BC320 77 i21MT-BC380 77 i21MT-BC450 77 i21MT-BGP32 20 i8-9MT-BGP37 20 i8-9MT-BGP46 20 i8-9MT-BP320 20 i8-9MT-BP370 20 i8-9MT-BP460 20 i8-9MT-BTT20 68 i24-25MT-BTT24 60 i16-17MT-BTT28 60 i16-17MT-BTT32 60 i16-17MT-BTT40 60 i16-17MT-BTT45 61 i16-17MT-BTT50 61 i16-17MT-C3125 84 i31MT-CRD20 48 MT-CRD21 48 MT-CRD28 48 MT-CS450 57 MT-CSN33 47/64/67 i20MT-DE001 53/61/64 i18-19MT-DI001 53 MT-ETD24 18 i7MT-ETD28 18 i7MT-ETD32 18 i7MT-ETD38 18 i7MT-F2121 84 i31MT-GDM01 57 MT-GDN33 47/61/64/67 i20MT-GDN50 47/61/64/67 i20MT-HDL30 52/56 MT-HDS30 52/56 MT-HHR07 56 MT-HHR13 56/137 i46-49MT-HKL21 54 MT-HKO21 54 MT-HKS15 54 MT-HLI10 51/61/64/73 i22-23MT-HMR05 53 MT-HMR10 53


MT-HSI10 51/61/64/73 i22-23MT-HTS10 57 MT-HW001 53 MT-IE160 56 MT-IE172 56 MT-IT100 55 MT-K2023 84 i31MT-LBT24 18 i7MT-LBT28 19 i7MT-LBT32 19 i7MT-LBT38 19 i7MT-LCD20 37 MT-LM005 52/55/61/64/79 i26-27MT-LRH20 51/61/65/73 i22-23MT-MRH10 51 MT-MRH20 51 MT-MSD20 37/56/79 i26-27MT-MUML2 106 i42MT-MUMS2 106 i42MT-MUR02 52/58/78/106 i42MT-MURL2 58/78/106 i42MT-MURS2 106 i42MT-NB225 55/112 i43MT-NMK02 106 i42MT-NRH10 52/62 i16-17MT-NRH20 52 MT-P2406 38/59 i16-17MT-P2408 38/59 i16-17MT-P2410 38/59 i16-17MT-P2411 39/59 i16-17MT-P2413 39/60 i16-17MT-P2416 39/60/63/68 i24-25MT-PD440 46 MT-PP001 53/69 i24-25MT-PP240 61/64 i18-19MT-RA480 54/143 i52-53MT-RB225 52/57/78/112 i43MT-RDE30 57 MT-RDL30 52/57/62/65/78/108 i40-41MT-RDM30 57 MT-RDS30 52/57/78/108 i40-41MT-RE160 58/79 i26-27MT-RE172 58/79 i26-27MT-RI030 50/65/69/73/138/143 i52-53MT-RI040 50/58 i15MT-RKL21 53/69 i24-25MT-RKS15 53/69 i24-25MT-RMR05 52 MT-RMR10 53/62/65 i18-19MT-RT070 50/54/61/80 i26-27MT-SCD20 37 MT-SM005 52/55/79 i26-27MT-SMD10 46/59/63/68/73 i24-25MT-SRA10 53 MT-SRH20 51/62/65/73 i22-23MT-TD110 46 MT-TD280 44 i14MT-TD320 44 i14MT-TD380 44 i14MT-TD400 44 i14

MT-TD450 45 i14MT-TD500 45 i14MT-TD550 45 i14MT-TDI28 42 i13MT-TDI32 42 i13MT-TDI38 42 i13MT-TDI40 42 i13MT-TDI45 43 i13MT-TDI50 43 i13MT-TDI55 43 i13MT-TDN19 46/59/63 i18-19MT-TDN20 38/68 i24-25MT-TDN28 41/63/66 i20MT-TDN32 41/63/66 i20MT-TDN38 41/63/66 i20MT-TDN45 41/64/66 i20MT-TDN50 41/64/66 i20MT-TDN55 41/64/66 i20MT-TDO01 37 MT-TDT28 40/60 i16-17MT-TDT30 68 i24-25MT-TDT32 40/60 i16-17MT-TDT40 40/60 i16-17MT-TDT45 40/60 i16-17MT-TDT50 40/60 i16-17MT-TP500 53 MT-TSD10 55 MT-UML21 54/68 i24-25MT-UMS21 54 MT-UN002 56/79 i26-27MT-URA10 56/79 i26-27MT-US002 56/79 i26-27MT-UW002 56/79 i26-27

MUMU-BGC48 105 i42MU-CC480 106 i42MU-CP048 105 i42MU-G0220 106 i42MU-H4480 105 i42MU-I0480 105 i42MU-IT480 105 i42MU-MG480 105 i42MU-RSM48 105 i42MU-S0220 105 i42MU-SP102 105/144/145/146 i54MU-T0480 105 i42

Cat. No. Page Additional Info Page

MWMW-AN151 93 i38MWH-2STUB 86 i34-35MWH-CAL59 86 i34-35MWH-M0131 86 i34-35MWH-M0132 86 i34-35MWH-M7559 86 i34-35MWH-MMOTR 86 i34-35MW-I0470 90 MW-IT100 90 MW-IT300 90 MW-P0010 93 i38MW-P1510 93 i38MW-PF550 91 MW-RSM10 91 MW-SP102 144/145/146 i54MW-TC013 92 MW-TCH13 92 MW-TPA10 92 MW-TPA12 92 MW-TPH50 92 MW-WMAC1 95

OEOE-IC001 108 i40-41OE-IC002 108 i40-41OE-MH001 109 i40-41OE-RCB01 109 i40-41OE-RCP01 108 i40-41OE-RCV01 109 i40-41OE-RCW01 109 i40-41

NOTES

© MIS Corporation. All rights reserved. * Additional information may be added to the product descriptions without prior notice.

















MAKE IT S I M P LE

Internal HexagonProduct Catalog, 2016

Learn more about MIS Implants

visit our website: www.mis-implants.com

or scan the QR Code

Internal Hexagon Product C

atalog, 2016

MC-CIH06 Rev.13

Date post:	16-Mar-2016
Category:	Documents
Upload:	mis-implants-technologies
View:	247 times
Download:	4 times

Internal Hex. Product Catalog, 2016 - English

Documents