document: ISV_155 WorkStar_7000S_HDD_v1.inddfolder: 08_ISV_155/KEYLINESserver: BagbyStudio/Internationaldate: 7/23/08_10:15am

program: InDesign CS3trim: 17.0” x 11.0”live: 16.0” x 10.0”bleed: 17.5” x 11.5”dpi: 300

4C: yesspot: nocoating: nofonts: Times, Helvetica Neue LT

WorkStar 7600/7700 SELL SHEET AD50084E Finished Size: 8.5" x 11.0" (Folded)

Heavy-Duty Diesel MoDels

®iNteRNatioNal® WoRkstaR® 7600 sPeCiFiCatioNs

*Standard Equipment Specifications are subject to change without notice.

Specifications, descriptors and illustrative material in this literature are as accurate as known at time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment. International and the International Diamond logo are registered trademarks of International Truck and Engine Corporation.

© 2010 International Truck and Engine Corporation, Warrenville, IL 60555 XAD -10005Lithographed in the U.A.E.

AXLE ConfIgUrATIonS 4x2, 6x4

WIDE TrACk fronT AXLE (non-DrIvIng) Dana Spicer: 12,000 - 22,000 lbs (5443 – 9979 kgs)

Meritor: 12,000 - 22,000 lbs (5443 – 9979 kgs)

rEAr AXLE (SIngLE) Dana Spicer: 23,000 - 30,000 lbs (10433 – 13607 kgs)

Meritor: 21,000 - 30,000 lbs (9525 – 13607 kgs)

Available with driver-controlled differential lock on select ratings

rEAr AXLE (TAnDEM) Dana Spicer: 40,000 & 46,000 lbs (18144 & 20865 kgs)

Meritor: 40,000 - 52,000 lbs (18144 – 23587 kgs)

Available with driver-controlled locking differential (optional)

EngInES – 4X2 & 6X4 Cummins ISM-320v 320 hp (239 kW) peak, 1,150 lb-ft (1559 n•m) torque

Cummins ISM-350v 350 hp (261 kW) peak, 1,450 lb-ft (1967 n•m) torque

Cummins ISM-400v 400 hp (298 kW) peak, 1,450 lb-ft (1967 n•m) torque

Cummins ISM-425v 430 hp (321 kW) peak, 1,550 lb-ft (2102 n•m) torque

TrAnSMISSIon Manual: fuller – 10, 11, 13, 18 speeds

Automatic: Allison – 4000 Series

Eaton Auto Shift 10, 18 speed

AIr rIDE CAb Conventional high strength double-sided galvanized steel cab 107” (272 cm) bbC

26" extended conventional steel cab 132.9" (338 cm) bbC

6-man steel crew cab 150.9" (383 cm) bbC

fUEL TAnk Single: 50 gal (189 L), 60 gal (227 L), 70 gal (265 L), 80 gal (302 L), 100 gal (379 L)Double: 100 gal (379 L), 120 gal (454 L), 140 gal (530 L), 160 gal (605 L), 200 gal (757 L)

DIAMonD LogIC® ELECTrICAL SySTEM: MULTIpLEXED• parking brake alarm

• Windshield wiper speed control (force wipers to slow)

• Headlights on with wipers

• pre-trip exterior light inspection

ALTErnATorS Leece-neville: 110 - 270 ampsDelco-remy: 100 - 145 amps

bATTEry (12v) 1,950 - 2,775 cold cranking amps

HEADLIgHTS Long-life Halogen (sealed beam)

EXHAUST SySTEM frame-mounted aftertreatment for noise reduction

STEErIng Sheppard

Single gear: power steering, 12,000 - 14,000 lbs (5443 – 6350 kgs

front axle ratings

Double gear: dual power steering, 16,000 lbs (7257 kgs) and up front

axle ratings

High-pressure steering pump

Available tilt and telescoping

brAkES Standard bendix 4-channel air brakes

AbS available

frAME rAIL Huck-bolted chassisSingle: 10.12" x .3125" (25.71 x .79 cm), 10.25” x .3125” (26 x .79 cm), 10.875” x .4375” (25.5 x 1.11 cm)Double: 10.80" x .3125" (27.43 x .79 cm) with outer c-channel reinforcementDouble 10-1/8" x 5/16" (25.72 x .79 cm) with outer C-channel reinforcement

rbM: Up to 3,806,400 in.- lbs

®

Heavy Duty Diesel

.

®

OUTSIDE

11˝

Trim

17˝ Trim

11.5

˝ B

leed

17.5˝ Bleed

10˝

Live

16˝ Live

Scale: 1˝ = 1˝

8.5˝ Fold 8.5˝ Fold

document: ISV_155 WorkStar_7000S_HDD_v1.inddfolder: 08_ISV_155/KEYLINESserver: BagbyStudio/Internationaldate: 7/23/08_10:15am

program: InDesign CS3trim: 17.0” x 11.0”live: 16.0” x 10.0”bleed: 17.5” x 11.5”dpi: 300

4C: yesspot: nocoating: nofonts: Times, Helvetica Neue LT

WorkStar 7600/7700 SELL SHEET AD50084E Finished Size: 8.5" x 11.0" (Folded)

1

2

3

4

5

67

Ergonomic cab design with easy-to-reach switches and a best-in-class HvAC system keeps you comfortable in the most extreme conditions.

A variety of available frame rails with optional C-channel reinforcement and standard Huck-bolt fasteners gives you the durability you need to tackle any job.

Innovative bonnet design keeps radiator above the front frame rail extensions, protecting it from ground debris as well as allowing for uninterrupted fEpTo access.

featuring Cummins® ISM diesel power, with up to 430 hp (321 kW) peak power and 1,550 lb-ft (2102 n m) of torque.

1 2 3 4 5 6 7

Diamond Logic reduces wiring by 50% and diagnostic time by 80%, keeping you on the job where you belong.

oversized, wraparound windscreen provides you with a commanding view of the road and the job site.

Standard wide-track axles and dual power steering gears provide maximum steering angles with minimum effort.

F i N D o u t a b o u t aW e s o M e P o W e R ati N t e R N at i o N a lt R u C k s . C o M

M i l e s a H e a D

tHe PuNCHes.a tRuCk tHat Rolls WitH

aND tHRoWs a FeW oF its oWN.

your work takes you into some harsh, unforgiving places. but you’re never intimidated, and neither is your International® WorkStar.®

The International WorkStar 7600 model is the very face of toughness and extreme capability, offering a strong standard frame rail system and heavy - duty engine. And with the brains of the Diamond Logic ® Electrical System monitoring the status of the vehicle, WorkStar 7600 also has you working harder, smarter and more efficently.

Throw in standard wide-track axles and a wraparound windscreen that offers a commanding view, and no obstacle will stand between you and a job well done. Simply put, the International WorkStar is miles ahead, so you will be, too.

®

INSIDE

11˝

Trim

17˝ Trim

11.5

˝ B

leed

17.5˝ Bleed

10˝

Live

16˝ Live

Scale: 1˝ = 1˝

8.5˝ Fold

.