| Date post: | 31-Mar-2015 |
| Category: |
Documents |
| Upload: | philip-keer |
| View: | 213 times |
| Download: | 1 times |
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
WORK PACKAGES 4 and 6
Oil Recovery ToolsTools Carriage
Interface of the Tool Carriage to the VesselTesting of the Recovery Tools
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
WORK PACKAGES 4 and 6
Recovery of 1 m3 oil costs 100 to 1000 times more on the shore than at sea
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Flexible and efficient design
• Lamor stiff brush technology is produced in different sizes and configurations to meet all operational requirements. Lamor skimmers are suitable for use in ponds, rivers, harbors, and offshore environments.
Brush WheelBrush Belt
1990 “Volgoneft”, Karlskrona, SwedenBuilt-in LORS-5 on 3 Swedish Coast Guard vessels recovered together 60 % (630 m3) of the whole spill
2001 “Pipeline”, Siberia, Russia
Lamor MM12, MM20 and MM30 Recovered 300.000 tons of oil during 3 months operation.
2002 “Harbour spill”, Finland
Lamor 3 x MM12, Recovered 250 tons of oil diesel fuel in ice conditions.
2002“Bitumen test”, Porvoo, Finland
Lamor brush skimmer and pump passed the extreme viscose test (3 million cSt)
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
How Lamor got involved in 2004:
First proposal for Mr. Gaudín
1 Lamor Stiff-Brush Conveyor Belt in Transport/Storage Position
2 Lamor Stiff-Brush Conveyor Belt in
Skimming Position
3 Conveyor belt lowered 1.2 m under the water surface
4 Oil transfer pumps
5 Hydraulic control panel
6 Electric remote control panel (option)
7 Electric control panel on bridge (option)
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
How Lamor got involved in 2004:
First proposal for Mr. Gaudin
1 Lamor Stiff-Brush Conveyor Belt in
Transport/Storage Position
2 Lamor Stiff-Brush Conveyor Belt in skimming Position
3 Conveyor belt lowered 1.2 m under the water surface
4 Oil transfer pumps
5 Hydraulic control panel
6 Electric remote control panel (option)
7 Electric control panel on bridge (option)
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Stiff-Brush Technology
• the basis of Lamor’s skimmer range
• in use on more than 450 vessels around the world
• recovers all types of oils and debris
• flexibility of design
• certified by independent tests and proven in hundreds of recovery operations globally
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Stiff-Brush Technology
• the brush conveyor belt for OSH was developed from the existing technology to meet the requirements of the project
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Stiff-Brush Technology
• new brush sections to be fitted on 1” chain and stronger structure of the brush frame was developed
Supporting bars added to the conveyor belt. Standard brush section on the left.
Hydraulic motors moved to the lower end. New brush core for stronger chain on the right.
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Skimmer Carriage
• the skimmer carriage is fitted on both sides of the OSH in the trimaran hulls
Both skimming systems; brush conveyor for heavy oils and Weir type skimmer for light oils attached to the skimmer carriage
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Similar Oil Recovery Systems than on the OSH
Stiff-Brush Technology
• Smaller scale skimmer suitable e.g for EU-MOP
• The Brush Skimming Systems enable high recovery speed for max. encounter rate. The Built-In system equipped vessels can operate at up to 4 knots
•Safe to deploy, stored in the vessel hull
•Deck remains clean during the operation
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Similar Oil Recovery Systems than on the OSH
Some examples of the delivered >450 systems in use
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Recovered oil pumping
• the brush conveyor belt is able recover extremely high viscous oils, emulsions and tar balls (> 2 mill cSt).
• Lamor PDAS (Positive Displacement Archimedes Screw type) pumps include many design features to enhance performance with extremely high viscosity oil.
• pumping of the recovered oil is part of the work package 4
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Oil Recovery Systems on the OSH
Recovered oil pumping
• The annular water injection is an essential property to enable the highest viscosity oil pumping.
Water injection facts:
• outlet 4% of total flow, 12 bar
Can be cold or hot water
• inlet 4 % of total flow, warm
water 80 to 100 ºC, 3 bar
INTERNATIONAL WORKSHOP ON MARINE POLLUTION CONTROL 9th June 2006, Athens
OIL SEA HARVESTER
TST4-CT-2004-516230
ww.osh-project.org
Lamor Corporation Ab
Mestarintie 25
FIN-06150 Porvoo
FINLAND
Tel: +358 19 5767 400
Fax: +358 19 5767 450
E-mail: [email protected]
www.lamor.com
Lamor Corporation LLC
28045 Ranney Parkway
Unit G
Cleveland, OH 44145
USA
Tel: +1 440 871 8000
Fax: + 1 440 871 8104
E-mail: [email protected]
Lamor Corporation UK Ltd
3 Medina Court, Arctic Road
Cowes,
Isle of Wight PO31 7XD
UK
Tel: +44 1983 280 185
Fax: +44 1983 280 056
E-mail: [email protected]
Lamor Asia Co. Ltd
A 601, Hongyuan Apartment,
4 Jiuxianqiao Road
Beijing 100015
CHINA
Tel: +86 10 8456 0303
Fax: +86 10 6431 2075
E-mail: [email protected]
Thank you !
