intMPE MP 3 G 1-2-3 PUMPSMP 3 The Best ANSI/ASME B73.1M Pump Alternative.
MP 3 Flows To: 7,400 GPMHeads To: 985 FeetTemps To: 500ºF
Applications
Chemical process Industry Petro chemical IndustryIndustrial Water and Waste Water General IndustryPaper companies, Mining Industry Construction industry
SEAL SENTRY
intMPE MP 3 G 1-2-3 PUMPSANSI B73.1M Complete Pumps Baseplates, Guards, Labyrinth & Packings
Mechanical Seals, Bellows Type High Temp.
Custom Applications Welcomed
ISO-9001 Certified to ASTM Standards
Alloy 20, CD4MCu, 316L, Hastelloy Grades Inconel, Monel, D.I., Titanium, Zerconium*All manufacturers' names, numbers, symbols and descriptions listed are used for reference purposes only, and it is not implied that any part listed is a product of any of these manufacturers!
intMPE MP 3 G 1-2-3 PUMPSIntmpe Company Overview
Manufacturing Pumps and Parts since 1964
intMPE MP 3 G 1-2-3 PUMPS
Quality Assurance
Intmpe Provides ISO-9001 Certification and ASTM Materials using sophisticated modern equipment, including:
Vacuum spectrometer, dye check!
X-Ray, Zyglo, Magnaflux, Spin Testing!
Microscopic Analysis, Hydro Static Testing!
All Materials offered & Application Engineering!
intMPE MP 3 G 1-2-3 PUMPSCOVERS
CBLOversize, cylindrical step bore designed for seals with large gland bolt and gasket circles: -Dual internal component seals isolate the seal chamber from the process with external source flush.- Single seal with throttle bushing and flush to boost pressure over flash point.
CBSCylindrical bore designed for packing arrangements and conventional seals with small gland bolt and gasket circles.
FMLPreferred selection in most applications. Designed for seals with large gland bolt and gasket circles: Single internal cartridge seals Dual nternal/external cartridge seals Single internal component seals with flexibly mounted seats Dual internal "true" tandem design cartridge seals
FMSSame as FML but accommodates seals with small gland bolt and gasket
circles: Single seals with all seat mounting configurations can be installed-This design in our secondary recommendation to the FML
intMPE MP 3 G 1-2-3 PUMPS
Characteristics Overview
intMPE MP 3 G 1-2-3 PUMPS
G 11. 1 1/2 X 1BF-42. 1 1/2 x 1-63. 3 X 1 1/2-64. 3 X 2-65. 1 1/2 X 1BF-86. 1 1/2 X 1-87. 3 X 1 1/2-8
G 28. 3 X 2-89. 4 X 3-8
10. 2 X 1BF-1011. 2 X 1-10A12. 3 X 1 1/2-10A13. 3 X 2-10A14. 4 X 3-1015. 4 X 3-10H
16. 6 X 4-1017. 6 X 4-10H18. 3 X 1/2 BF-1319. 3 X 1 1/2-1320. 3 X 2-1321. 4 X 3-1322. 4 X 3-13HH23. 6 X 4-13A
G 31. 8 x 6 - 14A2. 10 x 8 - 143. 6 x 4 - 164. 8 x 6 - 16A5. 10 x 8 -166. 10 x 8 - 16H7. 3 X 1 1/2-8
intMPE MP 3 G 1-2-3 PUMPSIMPELLERS
REVERSE VANE IMPELLER
Exclusive reverse vane impeller with balance holes offers important performance enhancing maintenance reducing advantages. Repeatable performance and seal chamber pressures allow repeatable MTBPM cycle.
SEMI-OPEN IMPELLER
Front vane, semi-open impeller is fully interchangeable with the reverse vane impeller. Excellent choice for stringy and certain applications requiring high shear against the casing.
LOW-FLOW IMPELLERFront vane, Low Flow, semi-open impeller for operation at low flow with minimal thrust loads and vibration. Radial loads are reduced up to 90% and shaft vibration is reduced up to 50% at low flows.
intMPE MP 3 G 1-2-3 PUMPS
INTERCHANGEABILITY
G 1 TYPE
intMPE MP 3 G 1-2-3 PUMPSINTERCHANGEABILITY G 2 TYPE
intMPE MP 3 G 1-2-3 PUMPS
INTERCHANGEABILITY
G 3 TYPE
intMPE MP 3 G 1-2-3 PUMPS
Improved Pump Reliability with Extended MTBPM at Low Flow Rates
Intmpe extends its ANSI pump design for high head/low flow rates.
1L 1.5 x 1BF-4 1L 1.5 x 1BF-8 2L 2 x 1BF-10 3L 3 x 1.5BF-13
Capacities60HzTo 220 gpm (50 m3/h)
50 HzTo 175 gpm (40 m3/h
Heads60 HzTo 985 ft (300 m)
50 HzTo 655 ft (200 m)
Pressures to 450 psi (3100 kPa) Temperatures to 700ºF (370ºC)
LOW - FLOW
intMPE MP 3 G 1-2-3 PUMPSSELF-PRIMING
Conveniently located high and dry at ground level where installation is simple and maintenance more easily and more economically performed.
Costing less to buy, install and maintain than submersible pumps, is designed to draw from liquid sources below ground level or from sources which have no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations ... it can be easily mounted on a trailer for movement to various pumping locations such as wastewater lagoon service.
Applications
Sump service Tank car unloadingDuplex pumping lift station
intMPE MP 3 G 1-2-3 PUMPSPolymerConcreteBaseplates
FeaturesANSI B73.1 MdimensionsExcellent corrosionresistanceVibration dampening superior to steel and iron Integrally molded catchbasin316 stainless steel inserts
intMPE MP 3 G 1-2-3 PUMPS
Polymer ConcreteBaseplatesOptional featuresCustom sizes Custom colors Hastelloy-C inserts Leveling screws Compatible groutIntegrally molded grout holes
intMPE MP 3 G 1-2-3 PUMPS
Inpro/seal ®
LabysFeaturesHigh quality bronze
Life is at least 100,000 pumping hours (11.4 years)
The Inpro/Seal "VBX" Bearing Isolator is the only labyrinth seal to afford positive protection against vapor transfer into the lube system -- at rest or under load.
Section View:
intMPE MP 3 G 1-2-3 PUMPSLantern Ring Material
FeaturesThermal Formed Fits your stuffing box better Easy to installOne Ring Fits Multiple Stuffing Boxes Fewer Orders Lower Inventory Fewer Outages
Virgin PTFE
Temperature to 500º F pH range from 0-14
intMPE MP 3 G 1-2-3 PUMPSLantern Ring Material
Available sizesCross-Section1/45/163/87/161/29/165/83/47/8
Width3/87/161/29/165/811/163/47/81
All Sizes in 48" LengthsCustom SizesAvailable upon Request
intMPE MP 3 G 1-2-3 PUMPS
CANADA * CHINA * INDIA * USA
For more information, Contact us at; Corporate: [email protected] Sales: [email protected]
Engineering Sales: [email protected]
Phone: +1-780-782-5770
http://www.intmpe.com
mailto:[email protected]:[email protected]:[email protected]://www.intmpe.com/
intMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPS intMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPSintMPE MP 3 G 1-2-3 PUMPS
