+ All Categories
Home > Documents > Introducing Biplanar™ 500e - JCI Medical...

Introducing Biplanar™ 500e - JCI Medical...

Date post: 06-Jul-2020
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
8
Introducing Biplanar™ 500e Dual View Surgical Imaging without Compromise
Transcript
Page 1: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

Introducing

Biplanar™ 500eDual View Surgical Imaging without Compromise

Page 2: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

The Biplanar™ 500e fully meets therequirements of orthopaedic, trauma and spinal surgery.

The Biplanar™ is the world’s only true Dual View Surgical Imaging

solution.

It performs simultaneous fluoroscopy in two orthogonal planes with

seamless integration into your workflow.

With a simple tap on the foot control, you are able to see both AP and

lateral views without any need for rotation or repositioning – highly

desirable in trauma surgery and key in spinal surgery.

When using the Biplanar™ you can focus fully on your work without

undesired interruptions. This results in shorter operating time,

significant dose savings and reduced infection risks.

With the option of the Biplanar™ 500e, operations in spinal surgery

can benefit from our technology.

The Biplanar™ 500e is the latest model of Swemacimaging’s™

original dual view imaging solution, which was the world’s first mobile

G-arm introduced in 1974.

More than 1,000 surgeons operate regularly on hips, tibias, knees,

and spines using the Biplanar™. Over 100,000 in¬terventions are

performed annually worldwide.

Overall, more than two million surgeries have been performed in more

than 18 countries since the introduction of the Biplanar™.

For more information about the Biplanar™ 500e, please contact our

product specialists.

Page 3: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

The Biplanar™ has been developed to fully adapt to the idea of mobile fluoroscopy to the best operating workflow

Page 4: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

Måttbandsvägen 12, SE-187 66 Täby, SwedenTelephone: +46 8 522 455 60, telefax: + 46 8 522 455 69

E-mail: [email protected]

For more information about the Biplanar™ please contact our product specialists.Phone +46 8 522 455 60 or send an e-mail to [email protected]

I strongly recommend using the Biplanar™ for orthopaedic and trauma surgery. The advantages are huge – both from the perspectives of handling and medical quality, which result in economic gains.

’’Prof. Dr. Karl-Göran ThorngrenProfessor of Orthopaedic Surgery

Page 5: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

Introducing

Biplanar™ 600sDual View Surgical Imaging without Compromise

Page 6: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

The Biplanar™ 600s fully meets therequirements of orthopaedic, trauma and spinal surgery.

The Biplanar™ is the world’s only true Dual View Surgical Imaging

solution.

It performs simultaneous fluoroscopy in two orthogonal planes with

seamless integration into your workflow.

With a simple tap on the foot control, you are able to see both AP and

lateral views without any need for rotation or repositioning – highly

desirable in trauma surgery and key in spinal surgery.

When using the Biplanar™ you can focus fully on your work without

undesired interruptions. This results in shorter operating time,

significant dose savings and reduced infection risks.

With the option of the Biplanar™ 600s, operations in spinal surgery

can benefit fully from our technology.

The Biplanar™ 600s is the latest model of Scanflex Healthcare

original dual view imaging solution, which was the world’s first mobile

G-arm introduced in 1974.

More than 1,000 surgeons operate regularly on hips, tibias, knees,

and spines using the Biplanar™. Over 100,000 interventions are

performed annually worldwide.

Overall, more than 2,000,000 surgeries have been performed in more

than 18 countries since the introduction of the Biplanar™.

For more information about the Biplanar™ 600s, please contact our

product specialists.

Page 7: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

The Biplanar™ has been developed to fully adapt to the idea of mobile fluoroscopy to the best operating workflow

Page 8: Introducing Biplanar™ 500e - JCI Medical Solutionsjcimed.com/yahoo_site_admin/assets/docs/CATALOGUE...The Biplanar 500e is the latest model of Swemacimaging’s original dual view

Måttbandsvägen 12, SE-187 66 Täby, SwedenTelephone: +46 8 522 455 60, telefax: + 46 8 522 455 69

E-mail: [email protected]

For more information about the Biplanar™ please contactour product specialists. Phone +46 8 522 455 60 or send an e-mail to [email protected]

I strongly recommend using the Biplanar™ for orthopaedic and trauma surgery. The advantages are huge – both from the perspectives of handling and medical quality, which result in economic gains.

’’Prof. Dr. Karl-Göran ThorngrenProfessor of Orthopaedic Surgery

HAY

STA

CK


Recommended