13
Introducing the “GTi Pro LITE”
A major advance in manual refinish spray gun technology.
• A new lightweight DeVilbiss Spray gun developed for busy
professional
painters needing the ultimate in quality finishes.
• Range of three advanced technology air caps (One HVLP and two
High
Efficiency) for optimum application performance with the latest solvent
and waterborne coatings.
• All new ergonomic gun body design with even better fit and balance
for
comfort and control.
• Three High efficiency fluid tips provide superb versatility across a
range
of climatic conditions and viscosities.
• Coaxial, low kick air valve design gives smoother feel for even greater
air and paint control for ease of fade-outs and blend-ins.
• Simplified, user friendly components provide faster, easier cleaning
and
maintenance
446g
All TorxTrigger removal, whenever necessary, has never been easier – no more screwdriver juggling – fast and positive, one sided removal with the Torx tool provided.
Ultimate ControlYou’ll be wearing your gloves, so we’ve redesigned the fan and fluid controls for smoother operation.
Who’s cheating?Well quite a few of you, according to our information. That’s why we included the cheater valve for accurate air control, at the gun.
Fit and FeelThe ergonomically designed gun body, forged in lightweight aluminium retains the legendary fit and feel that has kept DeVilbiss at the cutting edge of professional spray gun design.
IdentificationThanks to the four colour coded snap rings, identifying the right gun is a...snap!.
To Cap It AllThe DeVilbiss R&D team has developed three high performance air caps using world leading fluid dynamics technology to provide superb atomisation from the finest metallic and pearlescent basecoats to the latest high solid clears.
To New RetainerWe’ve even re-engineered the air cap retaining ring with a thrust washer allowing the cap to be rotated easily for perfect fan alignment, yet sealing perfectly.
Precision EngineeringA new high flow rate fluid tip design ensures the GTi Pro LITE’s superb versatility to handle a range of viscosities and virtually eliminating the need to change tips to suit different materials.
Sent Packing We’ve hidden the needle packing and replaced it with a flush fitting design that is self adjusting and keeps the trigger action smoother than ever.
Trigger Happy The GTi Pro LITE has a totally new trigger profile for ultimate comfort and wrap around finger grip when triggered or at rest.
It’s In The Air The co-axial concentric air valve on the fluid needle gives a low kick progressive feel of both air and fluid. This is superb for blends and fades.
Air Cap Development
The DeVilbiss R&D team have developed three high performance air caps using the latest fluid dynamics technology.
The new caps provide superb atomisation from the finest metallic and pearlescent basecoats to the latest high density clears.
The new increased diameter air caps have been engineered with larger back holes to feed the horns providing bigger spray fan patterns for easier overlapping.
Front End DevelopmentAir Cap Development
TE10 Air Cap
TE20 Air Cap
HV30 Air Cap
Air Caps – Air Flows
Fluid Tips – Fluid Flows
Gun Set Up Options
PRO Spray Gun Kits
Front End AssemblyFeatures and BenefitsComfort and Grip – Ergonomics
Gun Body – Manufacturing Process
Trigger Dynamics
Needle Packing
Ultimate Control
Pro Air Valve - A Question of Balance
Material Friendly – Fluid Tips
Front End Assembly
Easy Cleaning
Easy Maintenance
The radically new front end assembly means that there are just two components behind the fluid tip. The white seal remains in the gun body and the aluminium spray head comes away complete with air deflector clipped to it.
Spray Head Seal
The white seal fits into the front of the gun body recess
SN-18-1-K2
Spray Head & Seal Kit
Kit comprises the spray head, deflector plate and
white head seal
SN-17-1-K
Fluid Tip
Three sizes of fluid tip are available: #12, 13 or 14 to
suit material and application
PRO-200-XX-K
Air Cons (lit/min)450 @ 2.0 bar
Fluid Flow (cc/ml min)160-190
H1 HVLP
Air Cons (lit/min)280 @ 2.0 bar
Fluid Flow (cc/ml min)150-190
T1 Trans-Tech
Air Cons (lit/min)265 @ 2.0 bar
Fluid Flow (cc/ml min)150-190
T110 Trans-Tech
Air Cons (lit/min)350 @ 2.0 bar
Fluid Flow (cc/ml min)150-200
T2 Trans-Tech
HV30 HVLP TE10 High Eff. TE20 High Eff.
Air Cons (lit/min)460 @ 1.75 bar
Fluid Flow (cc/ml min)160-190
Air Cons (lit/min)270 @ 2.0 bar
Fluid Flow (cc/ml min)150-190
Air Cons (lit/min)360 @ 2.0 bar
Fluid Flow (cc/ml min)150-200
No 12 Fluid Tip. Part Number: PRO-200-12-K
If the No 13 tip is delivering more paint than you need, simply step down to the
No 12 to remain in perfect control.
Old GTi / GTi –W 1.3 users have seen a fluid flow increase with a the Pro 13
and therefore higher paint usage on their work. The No 12 tip gives them the
control they enjoyed on the former GTi guns.
No 13 Fluid Tip. Part Number: PRO-200-13-K
The number 13 tip is the perfect choice for most base or clearcoats. It is the
number one choice for choice for professional refinishers.
Flow rate matched perfectly for Base & Clear application - ie a colour match for
base and a high gloss and finish on clears.
No 14 Fluid Tip. Part Number: PRO-200-14-K
Who uses a 14? For certain materials some paint manufacturers prefer the use
of this higher flow-rate tip. Those who also incorporate CV work into their
workshops. Higher application speeds on larger surface areas.
Fluid Tips for GTi Pro Gravity Guns
Front End DevelopmentAir Cap Development
TE10 Air Cap
TE20 Air Cap
HV30 Air Cap
Air Caps – Air Flows
Fluid Tips – Fluid Flows
Gun Set Up Options
PRO Spray Gun Kits
Specifications – GTI PRO LITE GRAVITY
Air Inlet Pressure 2.0 bar (29psi)
Air Consumption TE10 Air Cap: 270 I/min (9.5 cfm)
TE20 Air Cap: 360 I/min (12.7 cfm)
HV30 Air Cap: 460 I/min (16.2 cfm)
Air Inlet Thread ¼” Universal
PerformanceAir Cap Development
TE10 Air Cap
TE20 Air Cap
HV30 Air Cap
Air Caps – Air Flows
Fluid Tips – Fluid Flows
Spray Pattern Performance
Gun Set Up Options
PRO Spray Gun Kits Cup Capacity 560 mls
Weight (gun only) 440 g
Weight (gun & cup) 620 g
Air cap Plated Brass
Air cap retaining ring Clear anodised Aluminium
Fluid tip Stainless Steel
Fluid Needle Stainless Steel
Solventborne BasecoatWaterborne Basecoat
GTi Pro Set UpPro T1 1.3 TE10Pro T1 1.2 TE10Pro H1 1.3 HV30Pro T2 1.2 TE20Pro H1 1.3 HV30Pro H1 1.3 HV30
Front End DevelopmentAir Cap Development
TE10 Air Cap
TE20 Air Cap
HV30 Air Cap
Air Caps – Air Flows
Fluid Tips – Fluid Flows
Gun Set Up Options
PRO Spray Gun Kits
High Solids Clearcoat
GTi Pro Set UpPro T1/T2 1.3 TE10/TE20Pro T1/T2 1.2 TE10/TE20Pro H1 1.3/1 HV30Pro T2 1.3 TE20Pro H1 1.3 Pro HV 30
Front End DevelopmentAir Cap Development
TE10 Air Cap
TE20 Air Cap
HV30 Air Cap
Air Caps – Air Flows
Fluid Tips – Fluid Flows
Gun Set Up Options
PRO Spray Gun Kits
Thank You For Your Attention
