Date post: | 12-Apr-2017 |
Category: |
Technology |
Upload: | eyal-benedek |
View: | 98 times |
Download: | 1 times |
New Booklet Makers from Plockmatic
Introducing two new finishing options for Konica Minolta with a high specification for the mid-range segment. The platforms will be available in two different basic configurations:
Plockmatic SD-500200 page (50 sheet) booklet maker, featuring numerous performance and durability enhancements including a number of patented technologies.
Plockmatic SD-350Cost effective 140 page (35 sheet) booklet maker built on the same engineering platform as the SD-500 version but offered at a highly competitive price point
Value Proposition:Capable of handling a wider range of booklet applications than ever before
Plockmatic SD-500 Production Booklet Maker - Introduction
• The Plockmatic SD-500 has a powerful specification for the midrange:– 50 sheet (200 page) booklets on
80gsm (20 lb. bond)– 20 sheets (80 page) booklets on
140gsm (100 lb text)• Available on the following
Konica Minolta printers:– bizhub PRESS C1100/C1085– bizhub PRESS 1052/1250/1250P – AccurioPress
C2070/C2070P/C2060
Value Proposition: Cost-effective alternative with high end features for low/mid volume booklet making
Plockmatic SD-350 Production Booklet Maker - Introduction
• Supports the same Konica Minolta devices as the Plockmatic SD-500
• The Plockmatic SD-350 has a high price/performance ratio– 35 sheet (140 page) booklets on
80gsm (20 lb. bond)– 17 sheets (68 page) booklets on
140gsm (100 lb text)• Same uptime, durability and
solid engineering as the Plockmatic SD-500
Intuitive GUI
Value Proposition: Operators of all skills levels can now use a wider range of adjustments and fine-tuning capabilities with ease.
A Color Graphical User Interface
• The SD-500/350 is equipped with a 7” touch color display
• More logical programming steps for complex jobs
• “Guided Start” feature for less experienced operators
• More detailed step-by-step instructions• Helpful hints and additional information
on every screen• Uses graphics to help explain trim
requirements
SD-500/350 Features continued
• The UI makes these settings easier to understand
• The SD-500/350 has a patented “set positioning mechanism” that enables the operator to adjust the staple position up and down on the spine from the UI. Fine-tuning can be performed anytime during the run.
• The fold positioning mechanism enables the customer to adjust the fold position to ensure image alignment from the UI
• Outstanding performance on sensitive media and heavy stock
• Patented folding technology from Plockmatic.
• Folding duration is optimized based on information from sheet and set thickness sensor
• Fold pressure is automatically set to ensure benchmark booklet quality regardless of stock type and sheet count
Value Proposition: High degree of automation delivers quality books with minimal operator intervention.
SD-500/350 Overview - Basic Configuration
Value Proposition: The easy-to-use hand feeding feature lets CRD’s provide additional booklet making services using output printed on other devices in the shop or across the enterprise.
Manual Feed
SD-500/350 Overview - Basic Configuration continued
• The Manual Feed function allows output from another printer to be finished on the inline Plockmatic SD-500/350 – even if the printer is running other jobs to the stacker
• The system is engineered to support an average volume of up to 30,000 booklets/manuals per month.
SD-350 to SD-500 upgrade concept
• Offer your customers the versatility of the option to easily upgrade the Plockmatic SD-350 any time on site
• Upgrade is enabled in the field by purchasing and installing a 50 sheet hardware key
• Performed by local service• Upgrade process takes less than 15 minutes
NOTE: For 50 sheet booklets the Trimmer option and the BookFold option is strongly recommended for professional looking output
Value Proposition: Produces professional, perfect-bound-like appearance for those booklet/manual applications that are greater than 20 pages (5 sheets) in length. Also enables printing on the spine of the book.
Optional BookFold Module - Overview
• Converts a conventional saddle stitched booklet into a flat square spine booklet with a look similar to that of a perfect bound book.
• Greatly improves booklet stacking and packing capability.
• 100 (50 sheet folded) sheet face trimmer with variable trim length – up to 1 inch
• Trims off the excess “creep” caused by folding multiple sheets to eliminate ‘shingling’ on the face of the finished book.
• Fold down output tray enables “unload while run” for limitless output capacity.
Value Proposition:
Simplifies work process by eliminating the need to separately trim the books in a guillotine.
Optional Face Trimmer Module - Overview
*The Trimmer can support “multi cut” operation in manual mode. This allows customers to create a 105mm / 4.14” long booklet cut down from a larger sheet size. Multi cut operation with trim lengths above 25mm or 1” is subject to productivity limitations and limitations in supported media
• Air Assist cover feeding system – feeds up to 93 lb. cover/250 gsm stock
• Handles both coated and non-coated pre-printed stock• Holds up to 200 sheets at a time depending on thickness• Pre-printed covers may allow some printers to operate
more productively• Ideal for blending pre-printed (offset or digital)
covers with body pages from the printer• The cover feeder can also be used as an off-line feeder for
pre-collated sheets adding flexibility to the workflow.
Optional Plockmatic Cover Feeder - Overview
NOTE: The sheets in the Cover Feeder module will not pass through the Rotate/Crease/Trim module if the RCT module is installed. If top and bottom trimming is required, these sheets will need to be pre trimmed offline.
Optional Rotate Crease Trim Module - Overview
• The Rotate Crease Trim module enables professional looking, full bleed trimmed and creased booklets on the Plockmatic SD-500/SD-350 system.
• The Rotate function allows sheets to be printed in the most productive orientation. Letter size sheets are run portrait and rotated to landscape for saddle stitching in the RCT.
• The Crease function enhances book appearance by reducing or eliminating “cracking” of toner on the spine. It also provides a flatter fold on thicker stock.
• The Bleed Trimmer trims the sides (head and foot) sheet by sheet. Full engine speed is maintained to allow for high productivity.
• Supports faster turnaround for booklets by eliminating multiple offline process steps
Standard Features of the Rotate Crease Trim Module
• Large external waste bin enables long unattended runs. Emptying of waste bin during run possible for maximum productivity.
• Two crease rollers are standard for optimal crease performance on all media. Easy set up through the UI in the Booklet Maker.
• The Trim Waste Conveyer is ideal for more production oriented sites with production of full bleed booklets.
• The waste conveyor allows long unattended runs when using the Plockmatic RCT.
• The unit takes its mechanical drive from the RCT itself and thus does not require an extra power outlet.
Value Proposition: Longer unattended runs without operator intervention.
The Optional Trim Waste Conveyor
• A high capacity belt stacker for more production-oriented sites
• Can be installed straight after the SD-500/SD-350 or at a 90 degree angle
• Allows long unattended runs• Stacks up to 1000 8,5 x 11” booklets of
4 pages• The unit is 440mm (17”) wide and
1770mm (68”) longValue Proposition: Longer unattended runs without operator intervention.
The Optional BST4000-1 High Capacity Belt Stacker
Exceptional Durability
• The Plockmatic SD-500 and SD-350 is designed for the demanding mid production market space
• It is designed to handle an average monthly booklet volume of 30,000 booklets per month
Durable Staple Heads
• Staple mechanism is maintenance-free thanks to a patented design.
• High-wear parts are now in the consumable cartridge itself, so service frequency is dramatically reduced
• New alloy staples for improved performance on heavy media
It’s not just about 50 sheets!
• Sheet count is only half the story• Your customers expect to run a
wider range of media types– Heavier Weights– Richer Textures– Coated and Uncoated
Plockmatic Configuration Options
• LS-506, MK-737 and engine specific relay unit/paper feeds are mandatory with Plockmatic (1052 does not require relay unit)
• No other finishers can attach
Plockmatic Configuration Options
SD-350 Mandatory
(Includes Hand Feed)SD-500 - Add
50-Sheet Upgrade Optional
RCT Optional
Face TrimmerOptional
BookFold Optional
(Face Trimmer Required with
BookFold)
Cover FeederOptional
26” 14” 14” 34” 36”
Konica Minolta Booklet Maker Comparison
SD-510Low Volume – 20 sheets max
SD-506Medium Volume – 50 sheet
max sheet max
SD-513Medium Volume – 35 sheet max
with square fold, creasing, full-bleed
Watkiss PowerSquare 224High Volume – 56 sheet max with square fold,
rotator, full-bleed
Plockmatic SD-350/500High Volume – 35/50 sheet max with square
fold, creasing, rotator, full-bleed
Some final thoughts…
• CRD’s and Commercial printers require differentiation– Flexibility– More services– Media variety
• Konica Minolta and Plockmatic turn stacks of paper into stories– The booklet is a great way to convey a message logically and with quality
• It’s not just about the number of sheets!– A booklet maker needs to reliably process thicker and more varied stock
types• The Plockmatic SD-500/350 is easy to use and service
– With thousands of Plockmatic installations, we’re learning and continuously improving
For More Information
Bill GrossNorth American Sales Director for Plockmatic
Email: [email protected] Office: 301-574-2408Mobile: 301-938-6356