Introduction Benyan - KH Egineering L.L.C.

Cover sheet! (PIC, logo)

Introduction

Global Experience, Local Approach

22 Global experience, local approach

INDEX

1. Introduction: KH International Projects Mission, Company values, Company structureMarket segmentsServices fields

2. Complete EngineeringProcess, Piping, Process Control, Mechanical, Civil, Electrical &Instrumentation

3. Project ManagementHealth Safety Environment (HSE)Safety Management System

4. Scope of Supply 5. Brownfield projects6. Project Resumes

7. Unique competencesiTANK – integrated Logistic Solutions for terminals and tank farm industries iMAC – independent Main Automation ContractoriBOP – innovated Balance of Plant

8. Contacts


KH Engineering

“Offering solutions which keep our clients competitive and completely compliant with the

law is the focus of our service ...

…Our strategy for success is to give its customers a direct and transparent approach

for technical know-how… ”

� C.J. VonkBusiness Development

KH International Projects b.v.

Founded in 1949 in the Netherlands, KH Engineering is an independently engineering company, and EPC contractor, providing engineering, procurement, and construction services to customers within a wide range of industries.

The oil & gas, petroleum industries contribute to the bulk of the company’s assignments. In addition, chemical plants, pharmaceuticals, food production, heavy industry, infrastructure and utility, and aerospace are important areas where the company realised and implemented many industrial and infrastructure projects.

KH Engineering established in 1949, under the name of Keynes, in the Rotterdam industrial port. Some years later, it merged with the Mathew Hall Group and Became the Mathew Hall Keynes Group (MHK). Eventually, the current name of Konings Haven (KH) Engineering was adopted in 1998. Presently, the company conducts 25% of its business internationally, with the Middle East and Europe holding the most new prospects.

Back to IndexBack to Index


Mission

To provide innovative technological solutions

By matching knowledge, techniques and new work

methods

mission, vision & objectives

To create value for our customers and share holders

With a flexible approach delivering high quality solutions

in a complex technical environment

To ensure sustainabilityand stability of our operations

With a continuous focus on people, safety and environment

respecting general accepted values



Glo

bal

E

xp

eri

en

ceL

oca

l A

pp

roa

ch

JV Values

Working together, we can bring value added solutions (both technically and economically) to our clients.

Local presence, enables us to be close to our clients, not only geographically, but also in spirit and understanding.



JV Structure

Netherlands RomaniaBelgium Abu Dhabi

Knowledge Centers

Project Management, Procurement, Subcontracting and Construction Management

Process PipingProcess Control

& InstrumentationCivil & Structural ElectricalMechanical

CompetenceManagement

Safety & QualityControl

Computing & ITHuman Resources

Cost Control and business Development


Benyan – KH Engineering L.L.C. Middle EastBenyan – KH Engineering L.L.C. Middle East


Expertise in services & solutions Industries experience

Turn-KeyProjects

EnvironmentalSolutions

IntegratedPlant Information

Systems

EPCM Services

Process ControlSolutions

Power & Infrastructure

Energy & Utility

Heavy Industry

Chemical

Oil & Gas

Food & Pharma

(for each solution / discipline)

Market splitExpertise and Experience

(for each solution / discipline)

ReferenceList

ProjectResume

CompetenceProfile

ReferenceList

ProjectResume

CompetenceProfile

Waste TreatmentSolutions



Vopak / Odfjell

Steering Tank TerminalsRotterdam - Singapore

2000 – 2004Automation

Market Segments

Al Furat Petroleum Co.

Omar Powerplant Extension projectOmar, Syria

BDE, EPC, plant commissioning

S.C. IASI S.A.

Fuel Gas Treatment Project CET

Romania, 2006

EPCM

PETROM

Gas Inline Blending Project

Romania - Ploiesti2007 – 2009

Lumpsum Turnkey

Oil & Gas

Chemical

Refining

Environment

Utility

Siemens

Mymensingh Power Station Phase III

Mymensingh, BangladeshEngineering

Energy

Benyan - KH

Heavy Industry

Oleicola El Tejar

Olive Waste to Energy

Spain, 2010

Business Case

Waste to Energy

Gasunie LNG

Replacement LNG control system

LNG Maasvlakte1997-2001 (5 yrs)

Oleicola El Tejar (OET)

TATA Group

Oxysteelfactory 2 Quick-Exchange Head

The Netherlands

Detail Engineering/ Modelling in Inventor



Services Fields

Unique competencesComplete Engineering Project Management

Engineering services and consultancy for complete engineering. Disciplines include:

• Process

• Piping

• Process Control

• Mechanical

• Civil

• Electrical

• Instrumentation

60 year successful experience on project management for various types of industrial projects:

• Green field projects

• Brown field projects

o Revamp

o Debottlenecking

o Turnaround

Besides, for contract management projects, we provide:

• Umbrella / Call-off agreements

• FEED / Conceptual

• Engineering, Procurement, Construction (management) projects

• Turnkey & Lump Sum TurnKey Projects

To satisfy specific needs/request from the clients in different industries, special packages delivering our in-house unique competences, a so-called “Product-Market Combinations” (PMCs) can be delivered to different industrial clients:

• i NVESTIMATE

• i BOP (Balance of Plant)

• i MAC (independent Main Automation Contractor)

• i Tank

• i DMS (Documentation Management System)

• KH Safety



Complete Engineering

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation



Benyan - KH Engineering recognises that process engineering is a very broad but important discipline formany industrial projects for example, oil & gas, chemical plants and refineries. Below is the main activities that KH process engineering carries out, and which add values in projects.

• Process simulations (ASPEN, HTRI, HYSYS)• Heat exchange calculations• Process safety (HAZOP, SIL)• Hydraulics calculations• Compliance checks• Risk assessments• HSE studies• Conceptual Design• PFD & P&ID design• Basic / Detailed Engineering

Process Engineering

01LRCV-001

DesignPressure 60 barg

V10001

LRC

001

Thermal or FireRelief Setting 60 barg

01UZ-100

01PRCA

001

H HH

002

01PZ

IA

120 Bar

Hydrocarbons

01PRCV-00101PZA-002

01PZA-002

Vopak TerminalTotal RefineryShell Chemical PlantRWE-Essent Power Plant

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation



Piping Engineering

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation

Odfjell TerminalSabic Chemical Shell Chemical PlantSiemens Power Plant

The Piping Engineering department at Benyan - KH Engineering provides professional design/drafting, 3D-modelling for plant design, technical studies like stress analysis in industries.

• Design/Drafting/3D-modelling• Codes and Standards compliance• Piping elements & specialties• Pipe hydraulics & sizing• Plot plan• Equipment layout• Process piping layout• Utility piping layout• Dynamic analysis• Transient Fluid Flow Analysis• Supports & Expansion joints• Material Take Off (MTO)



Process Control

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation

Shell RefineryShell RefineryProviron Huntsman

Benyan - KH Process Control department deals with architectures, mechanisms and algorithms to obtain the specific process within the client’s desired range. By providing the best programmable logic controller (PLC), or Distributed Control System (DCS) or SCADA system for client’s ideal plants, KH process control engineers deliver full range service package for clients’ control systems including the control rooms.

• Instrumentation data sheet• Control loop• Hardware design• Software design

Control room building

Console area

Console-, desk en counter designPictorial lay-out



Mechanical Engineering

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation

Tata Vosta Esa-Estec

Benyan - KH Engineering Mechanical department delivers the best choice for having the best rotating, static or handling equipment for the client’s operations and assets. KH mechanical engineers provide consultancy, diagnostics & troubleshooting, construction & inspection, analysis & testing and engineering services for the following equipments:

• Rotating equipment selection• Hoisting & Lifting equipments• Static equipment design• Logistics/Transporting system• Material & Solid handling

Besides engineering, you will find access for advices on Authority and Governmental regulations like CE Marking and PED.



Civil Engineering

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation

Huntsman Chemical SiteSiemens-Essent CHP PlantSabTankPurac- PPH Plant

As one of the oldest disciplines for projects, Benyan - KH Civil Engineering Department provides a broad range of engineering services to the clients, such as structural engineering, steelwork for process model, 3D design, inspections and etc.

• Issuing packages for building permits including consultation with welfare and building inspectorate;• Advice with relation to geo-technical, environmental-, construction- and structural-technical aspects including marginal aspects;• Perform structural inspections including report; • Repair advices



Benyan - KH E&I branch is a integrated expert team with experienced engineers and specialists from both electrical and instrumentation disciplines. Main activities include:

• Power network studies• Electrical network philosophy • Cable calculations & sizing• Layouts design• Hazardous area classification• Various specifications (e.g. transformers, HV-/LV-cables, HV/LV switchgear, UPS)• Electrical heat tracing systems• Equipment specifications• Energy distribution systems • MCC (switchgears)

Electrical & Instrumentation (E&I)

Single discipline:

Process

Piping

Process Control

Mechanical

Civil

Electrical

Instrumentation

Shin-Etsu Chemical PlantVopak TerminalGasunieShell Refinery



Project Management

Benyan - KH Project Management serves as an overall program manager on complex large-scale industrial projects. KH project managers sees every project with different project drivers. With diverse backgrounds and different cultures of project environments and (sub-)contractors, our project manager integrates the activities of engineering, procurement, and construction (EPC) functions with managerial tools for a success of the overall project. During the project lifecycle, health, safety and environmental (HSE), security, quality management system (QMS) will be applied to ensure the quality and reliability of the project.

Especially, with high transparency in project execution and project management, we are willing to share our experience and know-how to the clients in the below characterized brown field projects:

• Revamp • Debottlenecking • Turnaround



Benyan - KH is fully committed to complying with applicable National and International safety, health and environmental regulations and directives and to doing its utmost to prevent injury to persons, damage to property or harm to the environment. This policy is implemented in all areas of company activity, including administration of personnel, project execution (design, procurement and construction) and assignment of personnel.

HSE PolicyBack to IndexBack to Index


Benyan - KH has developed a 4 volume SMS safety handbook for issue to all employees of KH to give them a basic understanding of the Safety Management System (SMS).

The "Safety Management System" covers all aspects of safety management, including the organizational structure, responsibilities, practices, procedures and resources, necessary for the implementation of the Company Safety Policy.

The SMS procedures and their implementation by the various departments have been audited by Lloyd's Register Quality Assurance Ltd., and in January 2004 the Company was re-awarded VCA two star certification. The certification covers all areas of Company production activities (engineering, design, procurement, project management and construction management) and also office safety.

Safety Management System (SMS)Back to IndexBack to Index


As subject for the Company Corporate and Safety Policy specific safety training program is developed for their particular function, e.g.:

• Safety in engineering• Safety for personnel working at construction sites.• First aid and life saving

In addition Benyan - KH personnel are assigned to tasks with consideration to their experience and their mental and physical competence.

Improvement of safety awareness is established by the regular meetings in the company.

HSE ImplementationBack to IndexBack to Index


Environment Issues

Design Criteria

Proposal Eval.

Layout optim.

Supp. Pre-qual.

Specification

CompleteEngineering,Procurement,Training AndManagement

Package.

DetailedEngineering

Suppl. ident.RFI

FeasibilityStudies

Capex-Opex

Business Plan

DataCollection

Site Invest.

Pre-Project

Supervision

Diagnostic& Expert system

ModificationOptimization

QA / QC

Commissioning

ImplementationConceptualEngineering

Scope of SupplyBack to IndexBack to Index


INDUSTRYINDUSTRY

GREEN FIELD

BROWN FIELDBROWN FIELD

REVAMPSAFETY ENVIRONMENT

Drive CustomizedDriveDrive Drive Drive

DE-BOTTLENECKING

SPECIAL REQUIREMENTS

Legislation

Company Status

Return on Investment

License force

Technologies

Utilities requirements

Product variation

Operational optimization

Maintenance improved

Reliability

Legislation force

Lifetime extention

Utilities requirements

Capacity increase

Unique demands

Fixed investment

Time constraint

Special resources

Localization

Standardization

Emerging markets

Long-term revenue

New products demands

Global expansion

Plentiful raw materials

Cheap resources

Legal environment

Company Status

Culture/Behavior

Experience & Un-Ex.

Ergonomic improve

Clients’ knowledge

Brown Field Project DriversBack to IndexBack to Index

CHEMICAL

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Air Liquide

Debottlenecking HYCO3

GEP site, Bergen op Zoom

9 months

Euro 6,8 million

EPCM

Description:

The project involved debottlenecking of the existing HYCO3 plant at the General

Electric site in Bergen op Zoom. The work was executed within severe timing

constraints due to an early, pre-planned shutdown and a shutdown period of only two

weeks. Furthermore no field welds were allowed.

Scope of Work:

KH-Engineering executed the engineering and

procurement of bulk materials, itemised

instrumentation and also provided engineering

assistance during construction. Furthermore

KH-Engineering performed the HAZOP and the

authority engineering (Stoomwezen). Due to the

above-mentioned project constraints, much effort

was spent on site surveys and crosschecks of the

as-built documentation.

CHEMICAL

Client

Project

Location

Contract Duration

CAPEX

Type of Work

D MS Description:

Revamp of the recycle part in fertiliser plant, section 4, consists of:

• simplifying process routing between head of bucket elevators and moulding screws that also resulted in:

- reducing number of apparatus;

- less frequent occurring of interruptions (both technical and production technique);

- optimize process operation;

- higher on-stream time and higher production;

• improvement of working circumstances to present-day norms;

• optimisation of granulation process by measuring relevant process quantities;

• replacement of existing 4 undusting cyclones by one big cyclone;

• adjustment of existing elevator and moulding screw for the increase of capacity.

Revamp of ammonia logistic systems consists of:

• adjustment of ammonia intake systems:

- wagon (train) shipment;

- in-harbour shipment (river vessels);

- outer harbour shipment (sea-going vessels);

- freeze in installation;

- ammonia storage;

• modernisation of out of date systems according to the latest Nuisance Act requirements and CPR 13.

DSM Agro IJmuiden B.V.

Revamp Section 4

IJmuiden, The Netherlands

24 months

Euro 2,7 million

ECM

CHEMICAL

Client

Project

Location

Contract Duration

CAPEX

Type of Work

General Electric Plastics

Stretch Noryl Project

Bergen op Zoom

8 months

Euro 5 million

Basic engineering, detailed engineering, procurement, construction assistance, EPCm

Description:

Noryl is one of the raw materials for plastics produced by GEP in Bergen op Zoom. The

goal for this project was to debottleneck the existing Noryl plant in order to increase the

production capacity with 10%. Four main bottlenecks were identified and for this reason

the project was divided in four separate parts. The main part was to increase the

capacity of extruder lines 6&7 with 50%. This included a revamp of the existing

extruders itself and various modifications to the auxiliary equipment (larger product

bins, piping system, filters, etc.).

A critical success factor of this project was to realise a major part of the construction

activities within a shutdown period of two weeks.

The project was executed as a fast track project.

Scope of Work:

For this project the KH scope included Basic

Engineering, Detailed Engineering and

Procurement for and on behalf of GEP.

Furthermore KH provided the required engineering

assistance during the construction period.

CHEMICAL

Client

Project

Location

CAPEX

Type of Work

Resolution Europe

EOCL Reduction

Pernis-Holland

Euro 6 million

EPCM

Description:

The project involved upgrading of the existing AC/ECH/facilities at Resolution Pernis. Upgrading consisted of a “Shell Package” of process integrated measures to reduce the emission of Extractable Organic Chlorine (EOCI). Capacity of the facilities is 80 kton/year.

The following equipment was installed/upgraded: pumps, 6 PTFE lined reactor loops and installation trays on the purification column, 20 pumps and 3 vessels.

Scope of Work:

KH-Engineering executed basic of design, basic engineering and construction, detail engineering and procurement for the project, including:• 3D Autoplant modelling of the equipment, piping and structural steel;• Instrument Engineering and Design by using IN-Tools;• Piping stress calculations;• Electrical Engineering and Design with specific attention for the electrical interfaces with the vessel equipment;

• Preparation of mechanical specifications;• Process design (Process Flow Diagrams and Heat & Material balance);• Debottlenecking;• Revamp;• HAZOP and Ergonomical studies;• Project Management;• Construction Management;• Procurement;• Estimating;• Planning/Cost Control.

CHEMICAL

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Shell Nederland Chemie

Bacara

Pernis

12 months

Confidential

Detail Engineering and Safety Study

Description:

Debottlenecking of existing facilities for SNC-CVP plant including safety study and

revamp of potassium hydroxide and phosphoric acid storage facilities.

Scope of Work:

Detailed engineering and design of minimum flow and overpressure protection

systems for a propane-oxide pump.

A safety study of the above storage facilities incorporating storage tank blanketing and

overflow systems, two levels of overpressure protection and dynamic simulations of

nitrogen break through from road tanker unloading systems towards the storage tanks.

The dynamic simulations being performed by KH-Engineering software package.

Detailed engineering and design for demolition

of existing storage facilities and replacement by

increased capacity storage facilities, comprising

of road tanker unloading systems, storage tanks

and heating systems, product pumping facilities,

safety-shower and utility stations. The results of

the safety study were implemented in the detail

design of the new facilities.

CHEMICAL

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Shell Nederland Chemie

ECOS (Epikote Continue Opwerking Specialiteiten)

Pernis

1 year

Euro 9 million

Feasibility Study, Basic & Detail Engineering, Construction Assistance

Description:

Revamp of an existing Resins plant, comprising of product treatment and storage

facilities. The existing wet-product reactors were used for a smaller range of products,

resulting in a larger capacity for these products. The existing dry-product reactors

(previously moth-balled) were to be used for the remainder of the products. These

reactors and their treatment cycles were modified to handle a different product range.

Because of the increased total production capacity, additional storage capacity was

needed and created by re-alignment of existing storage tanks and the addition of new

storage tanks. As the existing plant was built in circa 1960, the entire facility was

reviewed, taking into consideration the revised authority requirements. This review

included a HAZOP and IPF classification for the dry-product train.

Scope of Work:

KH-Engineering assisted in all phases of the

project, including customer assistance in

producing the Basis of Design. In total circa

1400 m pipe was used in the modifications.

CHEMICAL

Client

Project

Location

Contract Duration:

CAPEX

Type of Work

Description:

New Glycol Ether Plant for Shell Pernis.

KH-Engineering carried out overall project management.

The project consisted of a new distillation and reactor section Unit 3000 and a major

revamp of all outside battery limit units like tankfarms, cooling water, product storage

and offloading and re-instrumentation and integration of the process control systems,

including upgrade of the control rooms.

KH-Engineering executed the design in an integrated 3D model.

Scope of Work:

KH-Engineering re-executed the basic

engineering. The detailed engineering was

executed by KH-Engineering. Procurement was

executed for and on behalf of SNC. During

construction assistance on discipline level was

given to SNC.

Shell Chemical Nederland

GE 2000

Pernis

14 months

Euro 38,5 million

Basic/Detail Engineering, Procurement and Construction Assistance

REFINING

Description:

Odfjell Terminal Rotterdam (OTR) intends to extend its distillation capacity by installing a new multi-purpose distillation unit for petroleum products.The new unit should be capable of distilling various petroleum fractions into gas oil both as top and bottom product, naphtha and intermediate products. To allow for this operation the unit has to operate under vacuum conditions as well as with overpressure.

The new distillation unit required extension of several site utilities as cooling water, fire water, and power supply. Furthermore, the existing hot oil unit was revamped to increase capacity, meet new NOx requirements and be able to use off-gas from 4 distillation units to fuel the burners.

An IPPC study was performed to check if modifications were necessary to existing systems in accordance with Best Available Techniques.

The project concerned Basic Engineering for the new unit resulting in a 10% estimate.

Scope of work:

• Risk analysis;• IPPC sudy;• Aspen simulations (incl. sensitivity analysis);• Heat integration studies (HTRI);• Plot lay-out and piping studies;• Area classification;• Re-design cooling water intake station;• Revamp hot oil unit;• Project schedule;• 10% estimate.

Client

Project

Location

Contract Duration

CAPEX

Type of Work

ODFJELL TERMINALS ROTTERDAM (PID)

New Distillation Column

BOTLEK - Holland

7 months

Confidential

BDEP

REFINING

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Description:

Meeting the future Sulphur Specification of 0.05% wt in 1996 required a major revamp

of Irish Refining’s existing Hydrofiner.

Features:

• Major revamp of the unit based on the addition of a new, much larger reactor

• Close collaboration with the catalyst supplier throughout the project

• Expansion of capacity from 5,000 BSD (design) to 10,000 BSD

• Allowance for future more severe specifications

Scope of Work:

AMEC London executed the feasibility and FEED

phases in close collaboration with the catalyst

supplier. The EPC phase of the project was

executed in

KH-Engineering’s Schiedam office, with

construction and project management assistance

from the London office. Local constructors were

successfully engaged for the execution of

fabrication and construction work.

Irish Refining PLC

Hydrofiner Revamp

Whitegate, Ireland

1 year

Euro 8 million

Engineering, Procurement, Construction and Project Management

REFINING

Client

Project

Location

Contract Duration

CAPEX

Type of Work

PETROM Member of OMV Group

Tank Farm Optimization PETROM

Romania - Ploiesti

1 year

Euro 120 million

Front-end engineering / 10% Estimate

Description:

The current tank farm situation at Petrom refinery- Petrobrazi is predominated by a low

grade of automation, a unit focused tank farm configuration (each unit has its own feed

and product tank, often pumping from one product tank to the next feed tank instead of

direct operation), an environmental situation which is worthy of improvements (in

particular to full fill future European standards) and reduce high operating cost (e.g.

operation, maintenance, utility consumption). Therefore Petrom/OMV is executing a

Tank Farm Optimization Petrom (TFOP) to implement an operational measures and an

investment roadmap of short/middle and long term improvements.

Scope of Work FEED:

Front End Engineering Design for the inside-

battery-limits (ISBL) of the TFOP including utility

services. The design package also covers the

associated feed and product lines, as well as a

10% estimate.

KH’s Investimate was used to comply with Cost

Classification requirements in acc. AACE

specifications. Furthermore KH implemented 3D

scanning / roundness scanning and was

responsible for the Management of the site

inspection programs.

REFINING

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Description:

As part of a major overhaul, expansion and renovation of part of the existing refinery for

Shell Nederland Raffinaderij (PER+ programme). KH-Engineering executed a complete

revamp, refurbishment and addition of new units to the existing Catcracker 2 and

Gasplant 3 installations, in order to adapt the design and installation of three new units

for the PER+ Refinery configuration.

These consist of a Gasoline Splitter Unit, a Gasoline Treater Unit, a new Waste Water

Boiler including Denox installation, and an Ammonia Storage Facility.

Scope of Work:

KH-Engineering undertook a basic design and engineering package including a ± 10%

capital estimate for the Catcracker 2 and Gasplant 3 revamps.

Shell NederlandRaffinaderij B.V.

Catcracker 2 (FCCU) and Gasplant 3 Revamp

Pernis

1 year

N/A

Basic engineering and ± 10% estimate

REFINING

Client

Project

Location

CAPEX

Type of Work

PETROM Member of OMV Group

Tank Farm Optimization PETROM Phase 1

Romania - Ploiesti

Euro 20 million

LSTK

Description:

Implementation of Tank Farm Optimization Petrom (TFOP) in phases.

First phase executed, where KH’s Investimate was used as Project

Management tool to control scope of work.

Scope of Work LSTK Phase 1:

4 tanks 5.000/1.000 m3 revamped/repaired +

fire fighting

1 new double wall floating roof 60.000 m3 tank

OIL & GAS

Client

Project

Location

Contract Duration

CAPEX

Type of Work

Gasunie LNG Maasvlakte

Replacement LNG control system

LNG Maasvlakte

8 years

Confidential

E/I detail engineering

Description:

The LNG Maasvlakte is a gas peak-shaving plant and will be used if pressure drops in the gasnet will occur (i.e: during strong winters). The buffer capacity of the LNG Maasvlakte will be only for a few days.

The project consists of a total field revamp of an old pneumatic operated plant to a fully electronic field instruments operated plant for Gasunie LNG location Maasvlakte.

The scope of work consists of: replacement of all existing transmitters, junction boxes, cables; replacement of existing Enraf level and temperature transmitters; replacement of existing fire, gas and warning detection systems; replacement of existing control cabinets by new DCS interface cabinets; implementation of new telephones in an existing system; replacement of existing video-monitors to new consoles; integration of existing local panel controls to the new DCS system; replacement of existing rotating No-break set by a new static No-break power supply; replacement of several distribution boards; replacement of old interposing cabinets by new and re-arrange the field cabling for local start/stop; safety switch for electrical driven motors; several studies, electrical and mechanical solutions.

Scope of work:KH Engineering executed detail engineering for the

project, including:• Project Management• Planning/Cost Control• Instrument Engineering and Design• Preparation of instrument specifications• Fire and Gas detection system study• Electrical Engineering and Design• Preparation of electrical specifications• Electrical load studies power system• Assistance to Construction Management


Views of i TANK (Integrated Logistic Solutions)

Piping

Mechanical

Civil

Process

Electrical/Instrumentation

Process Control



Views of iMAC (Independent Main Automation Contractor)

independent MAC

KH International ProjectsKH International Projects Supplier

Typically represented or leaded by a reputable technology/ hardware supplier.

As a result, the “selected” solution will be ALWAYS concentrated around its own technology/ hardware.

Truly independent Engineering and Contracting Group

Not being linked to any hardware/ technology supplier, allows us to ALWAYS select the best suitable overall solution for the client. Often this may imply different hardware/ technology suppliers.



consists of the remaining systems, components, and structures that comprise a complete plant or system and which are not included in the compiling packages

(such as gas turbine, steam turbine, sour water and sulphur train, waste heat boiler, etc.).

Views of iBoP (Innovated Balance of Plant)Back to IndexBack to Index


Contact Us

Abu Dhabi Business Development KH International

Middle East

Tel: +971 (2) 6725322

Fax: +971 (2) 6724323

KH International Projects

Tel: +971 (2) 6725322

Fax: +971 (2) 6724323

KH International Projects

Tel: +31 (0)10 2088888Fax: +31 (0)10 2088777

Area Manager:

Mr. Peter Verboom

Tel: +971 (0)56 7957456

[email protected]

Business Development Manager:

Mr. Kees Vonk

Tel: +31 (0)10 2088 514

[email protected]

Chief Executive Officer:

Mr. Jan Morang

Tel: +31 (0)6 55821028

[email protected]


Date post:	21-Aug-2015
Category:	Documents
Upload:	benyan-kh-international-projects-llc
View:	181 times
Download:	0 times

Introduction Benyan - KH Egineering L.L.C.

Documents