European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Li Jun
April 02 2008, Beijing
Orgalime - The European Engineering Industries Association, BrusselsOrgalime - 欧洲工程行业协会欧洲工程行业协会欧洲工程行业协会欧洲工程行业协会,,,,布鲁塞尔布鲁塞尔布鲁塞尔布鲁塞尔
ZVEI - German Electrical and Electronic Manufacturers’ Association,,,,FrankurftZVEI - 德国电气电子制造商协会德国电气电子制造商协会德国电气电子制造商协会德国电气电子制造商协会,,,,法兰克福法兰克福法兰克福法兰克福
Introduction of China Energy Label
- Current Status
- How to Implement the Rules
- Brief Introduction
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
China Energy Label is...
It is…
1. Information Label
2. Mandatory
3. Self-declaration
4. Registration
5. Category Management
6. Classification of Energy Efficiency
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Law basis of China Energy Label Management
Energy Conservation Law
of PRC
Product Quality Law of
PRC
Regulation on
Accreditation and
Certification of PRC
Regulation on Energy Efficiency Labeling Administration
Implementation
Rule
Implementation
Rule
Implementation
Rule
Implementation
Rule
Implementation
Rule
Implementation
Rule
Implementation
Rule
Implementation
Rule
……
Implementation
Rule
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
1. Name of Manufacturer
2. Type/Model of Product
3. Energy Efficient Grade
4. Energy Consumption
5. Performance Index
6. GB standard which the product comply with
SelfSelf--declarationdeclaration RegistrationRegistrationMarketMarket
SurveillanceSurveillance
General Information indicated on Label
Implementation Mode
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Milestones of China Energy Label Management
Regulation on Energy Efficiency Labeling Administration
NDRC/AQSIQ/CNCA No. 71, 2004
NDRC/AQSIQNo. 2, 2005
NDRC/AQSIQ/CNCA No. 505, 2005
NDRC/AQSIQ No. 48, 2005
NDRC/AQSIQ No. 417, 2005
NDRC/AQSIQ No. 20, 2006
NDRC/AQSIQ/CNCA No. 65, 2006
2004
Establishment of the Energy Label
Published the 1st product catalogue, sample pattern of energy label and implementation rule
Authorized CNIS to responsible for energy labeling registration
Officially enter into effective
Proclaim the type and manufacturer of energy-saving product
Aug. Nov.
2005 2006
Jan. Mar. Aug. Mar. Sep.
Proclaim the type and manufacturer of energy-saving product
Published the 2nd product catalogue, and implementation rule
Notification
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
China NDRC, AQSIQ and CNCA are the regulators of these implementation rules.
CNIS and its subordinative China Energy Label Management Center was authorized as
an offical authority for the management and registration of China Energy Label.
2008 2009
Timeline
3rd product catalogue and the
implementation rules officially
promulgated!
Jan. 18
Implementation rules enter
into force!
Jun. 1
!
Implementation Date and Responsibility
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Related Notifications
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Energy Standards Published (up to Dec. 31, 2007)
China has published 26 mandatory Energy Efficiency Standards
till Dec. 31, 2007, relate to five kind of products, includes:
- Household Appliances: 11
- Lighting: 8
- Commercial Device: 2
- Industrial Device: 5
- Vehicle: 1
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Characteristics of China Energy Label
Unified Product
Catalogue
Unified Implementation
Rule
Unified Test Standard
Unified Pattern and
Specification
Unified Product
Catalogue
Unified Implementation
Rule
Unified Test Standard
Unified Fee Standard
China Energy Label China CCC
VS
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Starting Time
Refrigerator
Air Conditioner
Washing Machine
Unitary Air Conditioner
Product
March 1, 2005
March 1, 2005
Category
March 1, 2007
March 1, 2007
All these products should label information
of their energy grade on machine!
Otherwise they should not be allowed to put
onto the China market!
Former 4 Products
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Manufactures Distribution Chart
199, 31%326, 51%
25, 4% 90, 14%
Refrigerator
Air Conditioner
Washing Machine
Unitary Air Conditioner
Total: 640
Manufactures Distribution
(Up to March 27, 2008)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Products Distribution Chart
7483, 34%
4417, 20%
1237, 6%
9004, 40% Refrigerator
Air Conditioner
Washing Machine
Unitary Air Conditioner
Total: 22141
Products Distribution
(Up to March 27, 2008)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Product Category has been enlarged to...
China NDRC, AQSIQ and CNCA have jointly promulgated the 3rd Product Catelogue and their
Implementation Rules by the 8th Announcement of 2008 on Jan. 18, 2008.
Self-ballasted fluorescent lamp
High-pressure
Sodium Lamp
Gas Water Heater
Water Chiller
Motor
I.
II.
V.III.
IV.
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Summary of the 3rd Product Catalogue
June 1, 2008GB 20665-2006
�Household gas instantaneous water heater (including condensing water heaters) and gas heating water heaters whose heat load is not more than 70 kW
�Not apply to the gas water heaters of container style
Household GasInstantaneous Water
Heater and Gas Heating Water Stove
5
June 1, 2008GB 19577-2004Water Chillers (Heat Pump) adopted vapor compression cycle for work which driven by Electric Motor- compressor
Water Chillers4
June 1, 2008GB 18613-2006
� 690V or below, 50Hz three-phase power supply
� energy level 2 & 3 in scope of 0.55 kW-315kW, energy level in scope of 3kW-315kW, 2 pole, 4-pole and 6-pole
�Closed single-speed by self fan cooling, N design electrical motor of general or explosion-proof purpose
Small and Medium
three-phase
Asynchronous Motors
3
June 1, 2008GB 19573-2004
�Used as an indoor and outdoor lighting, and has a transparent glass bulb
�Ordinary high-pressure sodium lamp with rated power of 50W, 70W, 100W, 150W, 250W, 400W, 1000W
High-pressure Sodium
Vapor Lamps2
June 1, 2008GB 19044-2003
�AC 220V/50Hz, 5-60W, adopt Edison screw or Bayonet lamp holder, household and similar use, integrate the components of startup control and stable ignition together
�Not apply to the self-ballasted fluorescent lamp which has the cover
Self-ballasted
fluorescent lamp1
Implementation
Date
Complied
StandardApplied ScopeProductNo.
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
General Requirements
out of Implementation Rules for both 5 Products
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Self-testers of the product shall have adequate resources and capability for the
testing against the relevant national standard. It is recommendable that their
laboratories receive national accreditation by the authorized accreditation body.
The manufacturer or the importer of the product listed may have its product tested
by itself or by the testing laboratories accredited by the officially authorized
accreditation body, so as to determine its energy-efficiency level against the
applicable national energy efficiency standard.
Requirements of Test Capability (I)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
- If the producers or importers use their own test resource to determine the energy efficiency levels , shall submit the laboratory materials, related records to authority. The materials should include staff capacity, equipment capacity and testing management program and so forth.
- Authorized institution should check the relevant materials of test ability submitted by producers.
Requirements of Test Capability (II)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Test Label Making RegistrationWeb
Written Document
Registration Procedures
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Necessary Materials for Regristration
Domestic
Manufacturer
� Copies of Business License or Registration Certification Letter� Manufacturer’s Information Table� Sample of Energy Label� Registration Form� Test Report of Energy Efficiency� Authorization of Trademark (if necessary)� Registration Form of Test Laboratory (self-test)
Oversea
Manufacturer
� Copies of Business License or Registration Certification of Manufacturer � Manufacturer’s Information Table� Duplicate of the contract signed by importer and manufacturer� Sample of Energy Label� Registration Form� Copies of Business License or Registration Certification of Importer � Test Report of Energy Efficiency� Authorization of Trademark (if necessary)� Registration Form of Test Laboratory (self-test)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
The manufacturer or the importer shall have the product registered by the authorized registrar within 30 days after it
has been labeled. The following documents shall be provided by means of mail, telegraph, telex, facsimile or e-mail:
1. Copy of the business license or the testimonial of their registration for manufacturers; copy of the
relevant contract with the producers overseas for importers;
2. Test report of the product energy efficiency;
3. Sample of the label;
4. Other relevant information, such as the initial date to apply the label;
5. In the case that an agent submits, on behalf of the manufacturer or the importer, documents for
the registration, a proxy document of the client shall be presented.
The above-mentioned documentation shall be reliable, accurate and complete!
Registration (I)
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Registration (II)
www.energylabel.gov.cn
+
Sample Test Report Registration Form E-registration by internet
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Registration (III)
� Producers or importers should submit annually the report on label using
before March 15 to the authorized bodies. The report should include the
main contents of: registration situation of each type, supervision and
punishment concerning label, label using and other relevant information.
Chinese version shall be submitted along with the documents originally
written in foreign language, and the Chinese version is given preference.
� The registration shall be renewed in the case that the contents of the
label have changed.
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Particular Requirements for 5 Products on Labeling
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
1. Style and specification of label
I. Self-ballasted Fluorescent Lamp
Information should be labeled:
1. Name or its shortened form of the manufacturer of the product
2. Product model
3. Energy efficiency level of the product
4. Nominal power (W)
5. Tint/Hue
6. Initial luminous efficiency (1m/W)
7. Code of the national standard applied
Minimum dimension: 45 mm* 30 mm
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
2. Printing and sticking of the label
� Producers or importers make its label by themselves, and responsible for the quality of
printing.
� Label should be printed or stuck at the obvious place on the minimum outer package of Self-
ballasted Fluorescent Lamp.
� If use the self-adhere label, should adopt 80g or above chrome paper for making.
� Energy Label should be printed or stuck to each produced or imported lamp.
� Energy Label printed or stuck on the lamp should be in accordance with the provisions of
Implementation Rule. The pattern, text and color of it is not allowed to change. The
dimension can be enlarged proportionally.
� The Label used in manual or propagandizing materials can be printed in black-and-white in
proportion, but the text on label should be clearly identified.
I. Self-ballasted Fluorescent Lamp
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
3. Basis for energy information labelling
� Producers means those who is responsible for products legally, the owner or user of brand.
� The type/model of product should be named in accordance with valid edition of GB/T 17263,
the producer can use their own series number for naming also and should be in
correspondence with the series number indicated on nameplate.
� Energy efficiency level should be confirmed according to the test methods and requirements
of valid edition of GB 19044 and test report.
� Initial luminous efficiency should be confirmed by the test report and the valid edition of GB
19044、GB/T 17263, and shall not exceed the corresponding level scope of energy
efficiency, initial luminous efficiency of tested product should meet the value of initial
luminous efficiency indicated on energy label.
I. Self-ballasted Fluorescent Lamp
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Information should be labeled:
1. Name or its shortened form of the manufacturer of the product
2. Product model
3. Energy efficiency level of the product
4. Rated power (W)
5. Initial luminous efficiency (1m/W)
6. Code of the national standard applied
Minimum dimension: 45 mm* 30 mm
No tint/Hue labeling here by comparing with label of self-ballasted fluorescent lamp!
II. High-pressure Sodium Vapor Lamps
1. Style and specification of label
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
2. Printing and sticking of the label
� Producers or importers make its label by themselves, and responsible for the quality of
printing.
� Label should use 80g or above chrome paper for making, if the quantity of same specification
is very samll, the label can be adopted by form of printing.
� Label should be stuck by the form of self-adhensive, or appending.
� The Energy Label should be stuck or appended to each motor when it is leaving factory or
importing.
� The Energy Label should be stuck or appended on an obvious front face position of motor.
� Energy Label printed or stuck on the lamp should be in accordance with the provisions of
Implementation Rule. The pattern, text and color of it is not allowed to change. The
dimension can be enlarged proportionally.
� The Label used in manual, outer package or propagandizing can be printed in black-and-
white in proportion, but the text on label should be clearly identified.
II. High-pressure Sodium Vapor Lamps
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
3. Basis for energy information labelling
� Producers means those who is responsible for products legally, the owner or user of brand.
� The type/model of product should be named in accordance with valid edition of GB/T 13259,
the producer can use their own series number for naming also and should be in
correspondence with the series number indicated on nameplate.
� Energy efficiency level should be confirmed according to the test method and requirements
of valid GB 19573 and test report.
� Initial luminous efficiency should be confirmed by the test report and the valid edition of GB
19573、GB/T 13259, and shall not exceed the corresponding level scope of energy
efficiency, the average initial luminous efficiency of tested product should meet the value
of initial luminous efficiency indicated on energy label.
II. High-pressure Sodium Vapor Lamps
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
III. Small and Medium three-phase Asynchronous Motors
Information should be labeled:
1. Name or its shortened form of the manufacturer of the product;
2. Product model
3. Energy efficiency level of the product
4. Efficiency
5. Rated power (kW)
6. Number of poles
7. Code of the national standard applied
Minimum dimension: 80 mm* 54 mm
1. Style and specification of label
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
2. Printing and sticking of the label
� Producers or importers make its label by themselves, and responsible for the quality of
printing.
� Label should use 80g or above chrome paper for making, if the quantity of same specification
is very samll, the label can be adopted by form of printing.
� Label should be stuck by the form of self-adhensive, or form of appending.
� The Energy Label should be stuck or appended to each motor when it is left factory or
imported.
� The Energy Label should stuck or appended at an obvious front face position of motor.
� Energy Label printed or stuck on the motor should be in accordance with the provisions of
Implementation Rule. The pattern, text and color of it is not allowed to change. The
dimension can be enlarged in proportion.
� The Label used in manual, outer package or propagandizing can be printed in black-and-
white in proportion, but the text on label should be clearly identified.
III. Small and Medium three-phase Asynchronous Motors
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
III. Small and Medium three-phase Asynchronous Motors
3. Basis for energy information labelling
� Producer means those who is responsible for products legally, the owner or user of brand.
� The type/model of product should be named in accordance with valid edition of GB 4831,
the producer can use their own series number for naming also and should be in
correspondence with the series number indicated on nameplate.
� Energy efficiency level should be confirmed according to the test method and requirements
of valid GB 18613 and test report.
� Efficiency should be confirmed by the test report and the valid edition of GB 18613、GB/T
1032, efficiency on label shall not exceed the value scope of corresponding energy
efficiency level, the tolerance should meet the requirement of valid edition of GB 755.
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
FQ of Energy Label Making
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Main Contents of Market Surveillance
� Whether or not has labeled the energy information
� Whether or not the energy information is correct
� Whether or not the pattern of energy label is satisfied with the
requirement
� Whether or not the position or manner which energy label placed is
correct
� Whether or not the energy information has been labeled in manual
� whether or not the energy label has registered at authority or renew
� whether or not use the energy label for the purpose of counterfeit and
misleading labeling
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
Proposal and Open Points
� Face to face discussion with regulator of energy label on implementation
� Promptly comment on Standards draft in future
� Seek for support from China Energy Label Management Center on market
surveillance
European Electrical and Electronics Industry | Communication Network : Technical Legislation . Standardization . Certification
Mr. Li Jun, April 02, 2008 In Cooperation with: AHK|GIC, Beijing . ORGALIME, Brussels . ZVEI, Frankfurt
These information are selected and summarized from Rules!
For your information only and thanks for your attention!
If you have some questions, you can contact Mr. Li Jun.