+ All Categories
Home > Documents > Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and...

Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and...

Date post: 14-Jan-2016
Category:
Upload: brendan-shaw
View: 213 times
Download: 0 times
Share this document with a friend
30
Introduction Pg 13 Chapter 1
Transcript
Page 1: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

• Introduction Pg 13

Chapter 1

Page 2: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Metric System Accuracy and Precision•Scientific Notation Absolute and Relative Error•Significant Figures Graphing Data •Power Relation y = ax2

•Direct Variation y = mx + b•Inverse Variation y = k/x•Solving Equations •Dimensional Analysis•Review Pg 37-38

Chapter 2 Measurement

Page 3: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Kinematics•Speed •Time •Velocity •Acceleration•Review Pg 60-61

Chapter 3 Motion

Page 4: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Adding Graphically•Head-Tail, Parallelogram Method•Adding Mathematically •Pythagorean Theorem, SOHCAHTOA

•c2 = a2 + b2 Tan = y/x •c2 = a2 + b2 - 2ab cos C•sin A/a = sin B/b = sin C/c•Review Pg 77-78

Chapter 4 Vectors

Page 5: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

1. Distance-Time Graph Constant Speed2. Speed-Time Graph Constant Speed3. Acceleration-Time Graph Constant Speed4. Distance-Time Graph Uniform

Acceleration5. Speed-Time Graph Uniform Acceleration6. Acceleration-Time Graph Uniform

Acceleration

vdt

d1 d0

t1 t0

a vt

v1 v0

t1 t0

dd0 vt vv0 at

d d0 12

at2 v2 v02 2ad

Chapter 5 Graphical Analysis

Review Pg 107-108

Page 6: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Types of Force Friction Terminal Velocity•Newton's Laws Falling Bodies Air Resistance•Mass vs Weight F = ma Pendulum

•Ff=µFN

Review Pg 144-145

T 2l

g

Chapter 6 Forces

Page 7: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Equilibrium, Equilibrant •Motion in Two Dimensions•Projectile Motion •Centripetal Force •Simple Harmonic Motion•Review Pg 169-170

a v2

rv

2r

T, t Fr

Chapter 7 Forces in Two Dimensions

Page 8: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Kepler's Laws•Universal Gravitation•Inverse Square Law •Escape Velocity•Review Pg 193-194

TA

TB

2

rA

rB

3

F G

mAmB

d2

T 2

r3

GmE g

Fm

Chapter 8 Gravity

Page 9: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Impulse-Momentum•p = m v f t = m v •Conservation of Momentum •m1v1 + m2v2 = m1v1' + m2v2'•Elastic and Inelastic Collisions•Review Pg 217-218

Chapter 9 Momentum

Page 10: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Work•Power•Net Force•Types of Machines•IMA, AMA, efficiency•Rotation and Torque•Angular Momentum•Review Pg 241-242

w = Fd w = F (cos ) d

P w

t

r

e

e

r

d

dIMA

F

FMA

Chapter 10 Work

%100xW

Weff

i

O

%100xIMA

MAeff

Page 11: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

•Potential Energy•Kinetic Energy •Conservation of Energy•Review Pg 267-268

PEmgh KE 1

2mv 2

Chapter 11 Energy

Page 12: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

1 Simplify using significant digits  a. 8.24 ‑ 3.159 b. 131 x 21.23 c. 12 ‑ 3.12 d. .012 + 3.21  5.08 2.78 x 103 9 3.22 2. Convert  a. 2.3 mm = ? km b. 2.1 m/s = ? km/hr c. 3 kg = ? mg d. 4.5 ml = ? L  2.3 x 10-6 km 7.56 km/hr 3 x 106 mg .0045 l  3. A car goes from 36 m/s to 15 m/s in 3 sec. What is the acceleration and the distance traveled?   

 

2m/s73

3615

t

vva if

m5.762

3s)(m/s) 15m/s (36

2

)(

tvvd fi

Page 13: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

4. Police measure skid marks 60 m long. The acceleration for dry pavement is ‑10 m/s2. Was the car exceeding the 80 km/hr speed limit? How long did it take to stop once the brakes were applied?  

km/hr 124m/s 341200

m))(60m/s10(20

2

2

221

22

ii

if

vv

v

advv

vf = vi = at 0 = (34 m/s) + (-10 m/s2)(t)

Yes

Page 14: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

5. Use the graph at the right to answer the following questions.  a.How far does the object go between 5 and 6 seconds? 6 m

b. What is the acceleration between 8 and 9 seconds? -1 m/s2

c. What is the total distance traveled? 35 m (total area under the curve)

d. When is the acceleration the greatest? Between 3-4 seconds (Slope is the steepest)  

Page 15: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

6. An object with a mass of 20 kg is accelerated upward with a force of 400 N.  a. What is the weight of the object?

W = mg W = (20)(9.8) = 196 N down  b. What is the net force? 400N – 196 N = 204 N up  c. What is the acceleration of the object? a = F/m = 204/20 = 10 m/s2 up  7. A force of 7 N at 90 is added to a force of 12 N at 180. Find the resultant and the equilibrant.  R2 = a2 + b2 = 72 + 122 = 193  R = 13.6 N E = 13.6 N @ 60° East of South   = tan-1(7/12) = 30° R = 13.6 N @ 60° West of North

Page 16: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

8. A trunk weighing 230 N is begins to slide down an incline with an angle of 30. Find the magnitudes of the parallel and perpendicular components and the coefficient of friction. 

Fx = F sin = 230 sin (30°) = 115 N 

Fy= F cos = 230 cos (30°) = 199 N 30 230 N µ = Fx/FY = 115N /199 N = tan 30° = .58 30

Page 17: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

9. A projectile is fired horizontally with an initial velocity of 34 m/s. Find the range and time in the air. The initial height is 2 meters.

range = vt = (34)(.64) = 21.72 m

10. A projectile is fired from ground level at an angle of 30 and a velocity of 40 m/s. Find the time in the air, the maximum height, and the range. Sketch the graph.

Vx= V cos = 40 cos (30°) = 34 m/s Vy= V sin = 40 sin (30°) = 20 m/s

.64sm/s 9.8

(2)(2m)22

g

dt

s1.4m/s 9.8

m/s 20m/s 202

a

vvt if

m4.20)s )(2.05m/s (4.9s) m/s)(2.05 (202

1 222 attvd i

m 139s) m/s)(4.1 34( vtd

Page 18: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

11. An object with a mass of 2 kg is attached to a string with a length of 2.5 m. Find the speed of the mass, the acceleration, and the centripetal force on the object. The frequency is 2 cycles per second. 

 

 12. Find the period of a pendulum with a length of 1.4 meters. 

m/s 31.4s .5

m) )(2.5(22

T

rv

222

m/s394.46m 2.5

m/s) (31.4

r

vac

N8.788)m/s62kg)(394.4( 2 cc maF

s 2.37m/s 9.8

m 1.422

2

g

lT

Page 19: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

13. Two masses of 3 kg and 8 kg respectively are separated by 1.2 m. Find the force of attraction between them.   

 14. A car weighing 16,000 N moving at 15 m/s is acted upon by a 700 N force until it is brought to a halt. Find the car's mass, the initial momentum, and how long it takes for the car to stop. 

N0111.1(1.2m)

kg) kg)(8 (3

kg

mN1067.6 9

22

211

221

xx

d

mmGF

m W

g

16000N

9.8m/s21632kg m/s kg24489)s kg)(15 (1632 mvp

s9.34N700

m/s kg 24489

F

mvt

Page 20: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

15. A 35 g bullet moving at 460 m/s strikes a 10 kg block of wood. The bullet becomes imbedded into the block. How fast is the bullet and block going after the collision? pbefore = pafter (.035 kg)(460 m/s) + (10 kg)(0 m/s) = (10.035 kg) v  16.1 kg m/s = (10.035 kg) v  v = 1.6 m/s 16. A lawnmower is pushed with a distance of 10 meters with a force of 60 N at an angle of 40 for 2 minutes. Find the net force, work done, and the power generated. 

W83.3s 120

J 459.6

t

WP

J459.6 m)N)(10(45.96 dFW

N96.45)40)(cos60(cosFF

net

net

Page 21: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

  17. A worker uses a pulley system to raise a 25 kg box 16.5 m. A force of 129 N is exerted and the rope is pulled 33 m. Fins the mechanical advantage, ideal mechanical advantage and the efficiency.     

  18. A 20 kg object is at a height of 20 m. Find the potential energy.      19. An object has a mass of 34 kg and is moving at 13 m/s. Find the kinetic energy.  

9.1129N

)m/s kg)(9.8 (25

F

FMA

2

E

R

2m 33

m 16.5

d

dIMA

R

E %95%1002

1.9%100

IMA

MA xxeff

J 3920 m) )(20m/s kg)(9.8 (20PE 2 mgh

J5.2873m/s) kg)(13 (342

1

2

1KE 22 mv

Page 22: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

T F 11. The SI unit of work is called the joule.T F 12. The rate at which work is done is called energy.T F 13. When an object is balanced so that any displacement lowers its center of gravity, the object is said to be in stable equilibrium.T F 14. There is a force on the earth that is directed toward the sun.T F 15. When the earth's shadow falls on the moon, a lunar eclipse occurs.T F 16. Ocean tides are caused by differences in the gravitational pull between the Moon and the opposite sides of the earth.T F 17. A bug on a turning record will make more turns per minute if it walks toward

the center of the record.T F 18. Ladybugs on the inside of a spinning bicycle tire will experience a force that feels like gravity to them.T F 19. In order to increase his or her rotational inertia, a tightrope walker can carry a long stick.

Page 23: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

T F 11. The SI unit of work is called the joule.T F 12. The rate at which work is done is called energy.T F 13. When an object is balanced so that any displacement lowers its center of gravity, the object is said to be in stable equilibrium.T F 14. There is a force on the earth that is directed toward the sun.T F 15. When the earth's shadow falls on the moon, a lunar eclipse occurs.T F 16. Ocean tides are caused by differences in the gravitational pull between the Moon and the opposite sides of the earth.T F 17. A bug on a turning record will make more turns per minute if it walks toward

the center of the record.T F 18. Ladybugs on the inside of a spinning bicycle tire will experience a force that feels like gravity to them.T F 19. In order to increase his or her rotational inertia, a tightrope walker can carry a long stick.

Page 24: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

T F 1. The rate at which velocity changes with time is called acceleration.T F 2. When a car rounds a comer at a constant speed, its acceleration is zero.T F 3. As a ball falls freely, the distance it falls each second is the same.T F 4. If you slide a hockey puck across a frictionless ice rink, there must be a horizontal force on the puck to keep it in motion.T F 5. Excluding the force due to air pressure, there is only one force acting on a book lying at rest on a tabletop.T F 6. If a bicycle and a parked car have a head‑on collision, the force of impact is greater on the bicycle.T F 7. A quantity that has both magnitude and direction is called a scalar.T F 8. When all forces acting on an object are balanced, the object is said to be in equilibrium.T F 9. Momentum is defined as an object's mass times its velocity.T F 10. The reason a baseball player follows through when hitting the ball is to be in contact with the ball for as long a time as possible.

Page 25: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

26. Suppose a car is moving in a straight line and steadily increases its speed.It moves from 35 km/h to 40 km/h in the first second and from 40 km/h to45 km/h in the next second. What is the car's acceleration?

 a. 5 km/h/s b. 10 km/h/s c. 35 km/h/s d. 40 km/h/s

 27. A ball is thrown straight up. At the top of its path, its instantaneous speed is 

a. 0 m/s. b. about 5 m/s. c. about 10 m/s. d. about 20 m/s. 28. The law of inertia states that an object 

a. at rest will remain at rest unless acted on by an outside force. b. will continue moving at the same velocity unless an outside force acts on it. c. will continue moving in a straight line unless an outside force acts on it. d. All of the above

29. How much force is needed to accelerate a 2‑kg physics book from rest to a speedof 6 m/s in 1 second?

 a. 36 N b. 12 N c. 3 N d. 0.33 N

 

Page 26: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

30. Friction is a force that always acts 

a. in a direction opposite to the direction of an object's motion. b. in the same direction as the object’s motion. c. in a direction perpendicular to the object's motion.

   31. If a horse pulls on a wagon at rest, the wagon pulls back equally as much on the horse. Will the wagon be set into motion? 

a. No, because the forces cancel each other.b. Yes, because there is a net force acting on the wagon.c. Yes, because there is a time delay between action and reaction.d. Yes, because the horse's pull on the wagon is greater than the wagon's pull on the horse

  32. A cannonball is fired at some angle into the air. In the first second, it moves 10 meters horizontally. Assuming it does not hit the ground and air resistance is small, how far will the cannonball move horizontally in the next second? 

a. More than 10 m b. 10 m c. Less than 10 md. There is not enough information to say.

 

Page 27: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

33. The reason padded dashboards are used in cars is that they 

a. increase the force of impact in a collision. b. increase the time of impact in a collision. c. decrease the momentum of a collision. d. decrease the impulse in a collision.

  34. F= ma is Newton’s ________ Law. 

a. 1st b. 2nd c. 3rd  35. If you lift one load up two stories, how much work do you do compared to lifting the same load up only one story? 

a. Four times as muchb. Twice as muchc. The same amountd. One half as much

 36. How much power is required to do 200 J of work on an object in 2 seconds? 

a. 400 W b. 200 W c. 100 W d. 2W

Page 28: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

37. Kinetic energy is the energy an object has because of its 

a. speed. b. location. c. size. d. temperature.

38. Compared to a car traveling at 50 km/s, how much farther will the same car skid when it is traveling at 100 km/s? 

a. Five times as far b. Four times as farc. Twice as far d. The same distance

  39. If you try to touch your toes while standing flat against a wall, you will probably fall over. This is because 

a. your center of gravity is outside your support area.b. your feet extend only a short distance.c. your center of gravity extends beyond your feet.d. All of the above

  40. The gravitational force between two masses  a. is always an attraction. b. depends on how large the masses are. c. depends inversely on the square of the distances between the masses. d. All of the above

Page 29: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

41. You can tell if a gravitational force exists in a region of space if 

a. you let go of a ball and it starts to move.b. you disturb a pendulum and it starts swinging.c. you can weigh yourself.d. All of the above

  42. What remains constant for a satellite in an elliptical orbit? 

a. Its speed b. Its kinetic energyc. Its potential energy d. Its total energy

  43. Where does the pickup needle on a phonograph move the fastest across the record? 

a. At the end of the recordb. At the beginning of the recordc. Everywhere, because it has the same speed everywhere on the record

  44. A car travels in a circle with constant speed. The net force on the car 

a. is directed forward, in the direction of travel.b. is directed toward the center of the curve.c. is zero because the car is not accelerating.d. None of the above

Page 30: Introduction Pg 13 Chapter 1. Metric System Accuracy and Precision Scientific Notation Absolute and Relative Error Significant Figures Graphing Data Power.

45. The reason an ice skater turns faster when he pulls his hands in is that 

a. angular momentum must be conserved.b. there are no large unbalanced torques acting on him.c. his rotational inertia changes.d. All of the above

   46. Density is defined as  a. mass divided by volume. b. mass times acceleration. c. length divided by time. d. length divided by volume. 

  


Recommended