Introduction 2 The Weld Saf e e range of products has been designed to provide practical and innovative solutions to improve both safety and productivity during welding and cutting processes. All Weld Safe products are manufactured to a high standard in the UK and are supplied via our approved distributor network. Details of your nearest distributor can be found on our website www.weld-safe.com Bespoke manufacturing In addition to our standard range of products we are able to offer bespoke solutions. Working in partnership with our distributors we are able to manufacture equipment to clients individual requirements. The Weld Safe product range is supplied as standard in safety yellow powder coat finish. We can if required supply products to a colour specified by the client if for example they have a particular corporate colour they use, ask your distributor for details. Page 20 - 24 Cylinder Pallets Page 25 - 26 Cylinder Storage Page 15 PushFit Grinding Page 16 Bespoke Enclosures Page 17 Replacement Curtains Page 3 Cylinder Lift Page 12 - 13 MaxiSeries Bays Page 4 - 5 Mobile Curtains Page 6 - 8 Welding Bays Page 10 - 11 PushFit Welding Page 9 Grinding Bays Page 14 PushFit Cutting Page 18 Welding Bench & Trestles Page 19 Weld Safe Mobile www.rapidwelding.com
Transcript
Introduction
2
The Weld Safee range of products has been designed to provide practical and innovative solutions to improve both safetyand productivity during welding and cutting processes.All Weld Safe products are manufactured to a high standard in the UK and are supplied via our approved distributornetwork. Details of your nearest distributor can be found on our website www.weld-safe.com
Bespoke manufacturingIn addition to our standard range of products we are able to offer bespoke solutions. Working in partnership with ourdistributors we are able to manufacture equipment to clients individual requirements. The Weld Safe product range issupplied as standard in safety yellow powder coat finish. We can if required supply products to a colour specified bythe client if for example they have a particular corporate colour they use, ask your distributor for details.
Page 20 - 24Cylinder Pallets
Page 25 - 26Cylinder Storage
Page 15PushFit Grinding
Page 16Bespoke Enclosures
Page 17Replacement Curtains
Page 3Cylinder Lift
Page 12 - 13MaxiSeries Bays
Page 4 - 5Mobile Curtains
Page 6 - 8Welding Bays
Page 10 - 11PushFit Welding
Page 9Grinding Bays
Page 14PushFit Cutting
Page 18Welding Bench & Trestles
Page 19Weld Safe Mobile
www.rapid
welding
.com
Cylinder Lift
3
Cylinder Handling...Made Easy !
Lift
Transport
Load
Designed for use with all 230mm dia cylindersLoad capacityMax Lift HeightInternal Leg WidthLiftingLoweringConstructionFinish
A large gas cylinder weighs on average 75kg..............How do you lift yours ?
Specially designed lifting bracketwith locking clamp for safety
Hydraulic Lift Smooth running castors
Please note - Cylinder lift is supplied with letter of conformity.
If required an independent weight test certificate can be suppliedat additional cost. Ask distributor for details.
The Weld Safe cylinder lift is the ideal way of lifting, moving and positioning gas cylinders safely into place on weldingmachines or around the work place.
Designed with safety in mind it greatly reduces the risk of muscular or back injury through manual lifting whilst improving stability during transportation over traditional methods such as cylinder trolleys or manually rolling.
Other uses for the Weld Safe cylinder lift are for movement of cylinders in factories, schools, laboratories and many other industries.
www.rapid
welding
.com
Moblie Welding Curtains & Frames
4
Welding curtains and strip are designed for the protection of employees within eyesight of welding and some cutting processes.They provide protection from UV (Ultra Violet) and Blue Light which can inflict damage to eyesight.
Bronze, Red and Green 6 curtains are transparent which assist in maintaining a safe working environment. They allow an element of vision into the welding area improving safety by maintaining vision of employees. Transparency also reduces the feeling of isolation for the welding operator. Green 9 is a dark green non transparent material suitable for areas of intenseradiation and should also be used when separating adjoining welding bays.
All Weld Safe curtains conform to EN 1598.Curtains and strips are self extinguishing and can withstand welding and grinding sparks. They will however not withstandopen fire. Whilst providing protection against radiation they are not suitable for observing welding works and are not to beused as a substitute for welding helmets with filter lenses. Single Panel Mobile ScreensWeld Safe screens are built with two things in mind, durability and ease of construction.
Welding Curtain Welding Strip 570High quality frame construction with 40mm box section uprights, 28mmTop & bottom rails and pressed steel feet. Quality Polyurethane castors supplied as standard. Welding Strip 300Specification as above but with pressed steel purpose made top hanging rail.
Part NoWSCF21CWSCF21BWSCF21RWSCF21GWSCF21CWSCF21BWSCF21RWSCF21GWSCFC
300 x 2 Strip300 x 2 Strip300 x 2 Strip300 x 2 Strip300 x 2 Strip300 x 2 Strip300 x 2 Strip
Welding Strip 300 (Dimensions in mm)
Part NoWSCF41CWSCF41BWSCF41RWSCF41GWSCF41CWSCF41BWSCF41RWSCF41GWSCFC
All frames -Height (without castors) - 1900mmHeight (with castors) - 1990mmGap floor to curtain without castors - 60mmGap floor to curtain with castors - 150mm
570 x 1 Strip570 x 1 Strip570 x 1 Strip570 x 1 Strip570 x 1 Strip570 x 1 Strip570 x 1 Strip
Welding Strip 570 (Dimensions in mm)Part NoWSCF31CWSCF31BWSCF31RWSCF31GWSCF31CWSCF31BWSCF31RWSCF31GWSCFC
www.rapid
welding
.com
Mobile Welding Curtains & Frames
Material SelectionWelding Curtainn - Light duty applications welding curtains are supplied in 0.4mm thickness in various sizes.Welding Strip 5700 - Medium duty applications 570 strip offers far more resilience to cuts, tears etc than welding curtains.570mm wide x 1mm thick strip can be supplied on 50mtr rolls or cut to any length with eyelets fitted.Welding Strip 3000 - Heavy duty application, it’s mechanical strength properties are far superior to both curtainsand 570 strip. 300mm wide x 2mm thick supplied on 50mtr rolls or cut to any size and drilled.
This guide should be followed in relation to all Weld Safe welding protection and separation products.
Tripple Mobilee - Mobile screens with two swing out arms either side. Compact when closed and allowing larger coveragewhen open. Available with either 570 Strip or 300 Strip.
5
Part NoWSCF71CWSCF71BWSCF71RWSCF71GWSCFC6
ColourClear
BronzeRed
Green
Width5160516051605160
RRP £’s438.90438.90438.90438.9031.35
Material570 x 1Strip570 x 1Strip570 x 1Strip570 x 1Strip
Castor Set(set 6)
Super Mobile - 570mm Wide Strips (Dimensions in mm)
Part NoWSCF81CWSCF81BWSCF81RWSCF81GWSCFC6
ColourClear
BronzeRed
Green
Width4720472047204720
RRP £’s528.90528.90528.90528.9031.35
Material300 x 2 Strip300 x 2 Strip300 x 2 Strip300 x 2 Strip
Castor Set(set 6)
Super Mobile - 300mm Wide Strips (Dimensions in mm)
Material570 x 1 Strip570 x 1 Strip570 x 1 Strip570 x 1 StripCastor Set
Welding Strip 570 (Dimensions in mm)
www.rapid
welding
.com
Welding Bays
6
Welding Bay CurtainsThe construction of a designated and properly constructed welding area plays a vital role in any modern workshop. Employers are duty bound to provide protection not only to the weldingoperator but also employees at risk from the process in adjoiningworkspaces.
Weld Safe bays provide this protection.
Welding bays provide a barrier to adjoining spaces against weld spatterand sparks from associated grinding and finishing processes. This notonly provides the necessary protection to personnel in adjoining areasbut also greatly improves fire safety by limiting the spread of hot spatterand sparks. PVC welding curtains used also assist in reducing the spread of noise.
The containment of these hazards can also assist in improving workflow and productivity through the shop.
Three standard sizes availableSupplied as a complete kitCorner posts allow curtain to sit into corner with no gaps
Curtain rail and lower rail as standard6’ x 6’ (1.8m x 1.8m)
8’ x 6’ (2.4m x 1.8m) 8’ x 8’ (2.4m x 2.4m) Wall mounting brackets
Welding Bay with standard 0.4mm Welding Curtain - Height 2000mm Floor to Curtain 150mm
SizeW x D x H6’ x 6’ x 6’
8’ x 6’ x 6’
8’ x 8’ x 8’
RRP £’s469.00
519.00
549.00
Material3off 6’ x 6’ Curtain
2off 6’ x 6’ Curtain1off 8’ x 6’ Curtain
3off 8’ x 8’ Curtain
Part NoWSB666
WSB866
WSB888
Ordering Information -When placing your order simply order the part number for the kit size you require and specify your curtain colour required.
Curtain colours - Dark green, Green, Bronze or Red. For clear please see grinding bays on Page 9
www.rapid
welding
.com
Welding Bays
7
Welding Bays with Welding Strip 570Curtain strip offers far more durability than standard welding curtains. The extra thickness of the material makes them more resilient to tears and grinding sparks and also helps to reduce noise levels. Being individual strips it also makes them easier to replace.
A standard bay is supplied with strips 1800mm long which leaves a floor to curtain gap of approximately 150mm. If preferred kit can be supplied with strips to floor level, contact your distributor for details.
Protects employees in adjoining areas from dangerous UVProvides spark protection during grinding processHelps to reduce risk of fireReduces noiseImproved working environment
Kit includes - Framework for bay structure, wall brackets, all nuts & bolts for framework, curtain strips, easy fit clip on curtain rings.
Ordering Information -When placing your order simply order the part number for the kit size you require and specify your curtain colour required.
Curtain colours - Dark green, Green, Bronze or Red. For clear please see our grinding bays on Page 9
Welding Bay with Welding Strip 570mm x 1mm - Height 2000mm Floor to Curtain 150mm
SizeW x D
2000 x 2000 4000 x 20002500 x 20005000 x 20002500 x 2500 5000 x 25003000 x 25006000 x 25003000 x 30006000 x 3000
Welding Bays with Welding Strip 300Curtain strip offers far more durability than standard welding curtains and 570 strip. The extra thickness of the material makes them more resilient to tears and grinding sparks and also helps to reduce noise levels. Being individual strips it also makes them easy to replace.
A standard bay is supplied with strips 1800mm long which leaves a floor to curtain gap of approximately 150mm. If preferred kit can be supplied with strips to floor level, contact your distributor for details.
Protects employees in adjoining areas from dangerous UVProvides spark protection during grinding Helps to reduce risk of fireReduces noise
Kit includes - Framework for bay structure, wall brackets, all nuts & bolts for framework, curtain strips & fixing bolts.
Ordering Information -When placing your order simply order the part number for the kit size you require and specify your curtain colour required.
Curtain colours - Dark green, Green, Bronze or Red. For clear please see our grinding bays on Page 9
Welding Bay with Welding Strip 300mm x 2mm - Height 2000mm Floor to Curtain 150mm
SizeW x D
1850 x 1850 3700 x 18502600 x 18505200 x 18502600 x 2600 5200 x 2600
DescriptionSingle BayDouble BaySingle BayDouble BaySingle BayDouble Bay
For larger welding bays 12 &13
548.40980.40629.401161.40679.40
1248.40
www.rapid
welding
.com
Grinding Bays
9
Grinding operations create a number of problems. Dangerous sparks increase the risk of fire as well as the risk of personalinjury to employees in adjacent work areas. Dust and noise can also cause a nuisance, Weld Safe grinding bays can helpcontrol these risks.
A standard bay is supplied with strips 1800mm long which leaves a floor to curtain gap of approximately 150mm. If preferred kit can be supplied with strips which hang to floor level, contact your distributor for details.
Protects employees in adjoining areasProvides spark protection during grinding processHelps to reduce risk of fireHelps to control noiseImproved working environment
Grinding Bay with Clear Strip 570mm x 1mm - Height 2000mm Floor to Curtain 150mm
SizeW x D
2000 x 20002500 x 20002500 x 25003000 x 25003000 x 3000
RRP £’s479.60509.60569.60599.60649.60
Part NoWSBG2020WSBG2520WSBG2525WSBG3025WSBG3030
DescriptionSingle BaySingle BaySingle BaySingle BaySingle Bay
Kit includes - Framework for bay structure, wall brackets, all nuts & bolts for framework, curtain strips, curtain rings.
Grinding Bay with Clear Strip 300mm x 2mm - Height 2000mm Floor to Curtain 150mm
SizeW x D
1850 x 18502600 x 18502600 x 2600
RRP £’s518.60589.60649.60
Part NoWSBG1818WSBG2618WSBG2626
DescriptionSingle BaySingle BaySingle Bay
www.rapid
welding
.com
PushFit Series Welding
10
PushFit SystemEasy way to create workspace separation
The fast and convenient way of erecting freestanding screening using a system of interconnecting posts and rails. Using our low profile freestanding base plate it is easy to create straight runs or simply divide the space into bays.
With a choice of welding strips, clear strips or welding blankets you can provide protection from hazards such as welding arcs, grinding sparks, noise, dust, moisture simply choose the screening media to suit your application.
Easy to erectLow profile base only 5mm high reduces risk of tripsAllows flexibility of workspaceEasy to dismantleEasy to storeEnables long runs to be achievedSeparate areasChange the protective media for different applicationsWeldingCutting (See Page 14)Grinding (See Page 15)Bespoke sizes available
Low Profile Base Plate
www.rapid
welding
.com
PushFit Series Welding
11
Part NoWSPF20WSPF21WSPF22WSPF23WSPF24
DescriptionStarter Kit Extension Kit Straight PostExtension Kit Corner PostExtension Kit 3 Way PostExtension Kit 4 Way Post
RRP £’s349.40308.403311.40314.40
08.40
PushFit 300 Series WeldingSupplied with 300mm x 2mm Welding Strip
Kit ContentsConsists of -2 x Straight Post2 x Connecting / Hanging Rails2 x Freestanding Base1 x Curtains & Hanging Pack1 x Bolt Pack
1 x Post (Options illustrated below)2 x Connecting / Hanging Rails1 x Freestanding Base1 x Curtains & Hanging Pack1 x Bolt Pack
Starter Kit
Extension Kit
Three wayPost
Four wayPost
CornerPost
Starter Kit Extension Kit
StraightPost
Ordering Information -When placing your order simply order the part number for the kit size you require and specifyyour curtain colour required.
Curtain colourss - Dark green, Green, Bronze or Red
www.rapid
welding
.com
MaxiSeries Welding
12
Ideal for creating large welding baysThe construction of a designated and properly constructed welding area plays a vital role in any modern workshop. Employers are duty bound to provide protection not only to the welding operator but also employees at risk from the process in adjoining work spaces. Weld Safe bays provide this protection.Welding bays provide a barrier to adjoining spaces against weld spatter and sparks from associated grinding and finishing processes. This not only provides the necessary protection to personnel in adjoining areas but also greatly improves fire safety by limiting the spread of hot spatter and sparks. PVC welding curtains also assist in reducing the spread of noise.The containment of these hazards can also assist in improving work flow and productivity through the shop.
Part NoWSMS20WSMS21WSMS22WSMS23WSMS24WSMS25WSMS26
Description2.5mtr Fixed Rail Opening Kit 2.5mtr Swing Arm Opening Kit2.5mtr Extension Kit Straight Post2.5mtr Extension Kit Corner Post2.45mtr Wall Kit2.5mtr Extension Kit 3 Way Post2.5mtr Extension Kit 4 Way Post
RRP £’s299.60399.60268.60268.60232.60271.60274.40
MaxiSeries 570 Series WeldingSupplied with 570mm x1mm Welding Strip
Standard Height 2mtr (We can manufacture to higher if required, ask for details.)
Part NoWSMS30WSMS31WSMS32WSMS33WSMS34WSMS35WSMS36
Description2.4mtr Fixed Rail Opening Kit 2.25mtr Swing Arm Opening Kit2.35mtr Extension Kit Straight Post2.35mtr Extension Kit Corner Post2.3mtr Wall Kit2.35mtr Extension Kit 3 Way Post2.35mtr Extension Kit 4 Way Post
RRP £’s343.60443.60308.60308.60255.60311.60314.60
MaxiSeries 300 Series WeldingSupplied with 300mm x 2mm Welding Strip
Standard Height 2mtr (We can manufacture to higher if required, ask for details.)
570 Series
www.rapid
welding
.com
MaxiSeries Welding
13
Protects employees in adjoining areas from dangerous UVProvides spark protection during grinding processHelps to reduce risk of fireReduces noiseImproved working environment
Ordering Information -When placing your order simply order the part number for the kit size you require and specify your curtain colour required.
Curtain colourss - Dark green, Green, Bronze or Red
Straight Post
Corner Post
3 Way Post
4 Way Post
Standard system manufactured with 50mm x 50mm box sectionsteel posts connected using 28mm diameter top and bottom rail.All components powder coated safety yellow.Kit Contents
Consists of -2 x Straight Post1 x Hanging Rail1 x Curtains & Hanging Pack1 x Bolt Pack
Slide CurtainKit
Consists of -2 x Swing arm Post2 x Swing Arms1 x Curtains & Hanging Pack1 x Bolt Pack
Swing Arm Kit
Consists of -1 x Post (Options illustrated right)2 x Connecting / Hanging Rails1 x Curtains & Hanging Pack1 x Bolt Pack
Extension Kit
Swing ArmKit
Straight ExtensionKit
Wall Kit Corner Kit
Straight ExtensionKit
Wall Kit
Typical Example 10mtr x 5mtrWith Swing Arm Opening
Consists of -2 x Connecting / Hanging Rails2 x Wall Brackets1 x Curtains & Hanging Pack1 x Bolt Pack
Wall Kit
Typical Example 7.5mtr Wide x 5mtr DeepWith Swing Arm Opening
Swing ArmKit
Corner Kit
Straight ExtensionKit
Wall Kit
Corner Kit
Straight ExtensionKit
Wall Kit
Layout servicee - if you would like us to work out a bay for your area let us know dimensions and shape and we will send you a plan.
Swing Arms allow easy access for forklift & pallet trucks
Swing Arms 2.5mtr Opening
www.rapid
welding
.com
PushFit Series Cutting
14
PushFit SystemEasy way to create workspace separationBased on the same pushfit framework as the Welding Series it is easy to create separation areas for cutting purposes.
Cutting operations create a number of problems including dangerous sparks which increase the risk of fire or personal injury to personnel in adjoining areas, dust and noise. The Cutting Series system will help to control all of these problems.
PushFit Series CuttingSupplied with 1000mm Wide 600 degrees welding blanket
Post Type2 xStraight
StraightCorner3 Way4 Way
Starter Kit
Extension Kit
Consists of -2 x Straight Post2 x Connecting / Hanging Rails2 x Freestanding Base1 x Curtains & Hanging Pack1 x Bolt Pack
1 x Post (Options illustrated right)2 x Connecting / Hanging Rails1 x Freestanding Base1 x Curtains & Hanging Pack1 x Bolt Pack
Kit ContentsStraight Post Corner Post
3 Way Post 4 Way Post
For more details of PushFit system please refer to Pages 10 & 11
www.rapid
welding
.com
Pushfit Series Grinding
15
PushFit SystemEasy way to create workspace separationBased on the same framework as the Welding Series it is easy to create separation areas for grinding purposes.
Grinding operations create a number of problems dangerous sparks increase the risk of fire as well as personal injury topersonnel in adjoining areas, dust and noise. The Grinding Series system will help to control all of these problems.
PushFit 570 Series GrindingSupplied with 570mm x 1mm Clear Strip
DescriptionStarter Kit
Extension Kit
Base
DimensionsHeight 1820mmWidth 2540mm
Height 1820mmWidth 2500mm
600mm x 200mm5mm Thick
PushFit 300 Series GrindingSupplied with 300mm x 2mm Clear Strip
DescriptionStarter Kit
Extension Kit
Base
DimensionsHeight 1820mmWidth 2400mm
Height 1820mmWidth 2360mm
600mm x 200mm5mm Thick
Part NoWSPF50WSPF51WSPF52WSPF53WSPF54
RRP £’s349.40308.40308.40311.40314.40
DescriptionStarter Kit Extension Kit Straight PostExtension Kit Corner PostExtension Kit 3 Way PostExtension Kit 4 Way Post
Part NoWSPF40WSPF41WSPF42WSPF43WSPF44
RRP £’s319.60278.40278.40281.40284.40
DescriptionStarter Kit Extension Kit Straight PostExtension Kit Corner PostExtension Kit 3 Way PostExtension Kit 4 Way Post
For more details of PushFit system please refer to Pages 10 & 11
www.rapid
welding
.com
Bespoke Enclosures
16
3.6mtr x 3.6mtr Enclosure Screen
The BriefOur brief was to manufacture an enclosure for use in a busy production area. Our client required to be able to weld heavy 1.2m x 1.2m casting dies within the production area to reduce downtime. The safety officers wanted screening with 100% no gaps between the curtain material.
The SolutionOur solution was to produce a screen enclosure with curtains bolted directly to the frame. The enclosure was made as two hinged sections which when opened connect into each other. One side is also hinged to allow access.
The end result is a practical enclosure providing a large internal space which has now become one of our standard products.
Bespoke ServiceWe have the capability to manufacture any enclosures even with a roof if required. If you would like a quotation for bespoke sizes simply give us all the details- length, width, height, curtainmaterial required and we can design an enclosure for you. Part No
WSCE3636GWSCE3636RWSCE3636B
DimensionsW x D x H
3600 x 3600 x 20003600 x 3600 x 20003600 x 3600 x 2000
RRP £’s1895.001895.001895.00
ColourGreen
BronzeRed
3.6mtr x 3.6mtr Enclosure - Welding Curtains
www.rapid
welding
.com
Replacement Strips
17
Recommended for heavy duty applicationsAvailable in green, amber and bronze.
300mm Wide x 2mm Thick Supplied on 50mtr roll or cut lengthsHanging system availableLarge stocks available for next day deliveryConforms to EN 1598 (Excluding clear)
Note - Clear not suitable for protection from welding arcs .
300mm Wide Welding Strip
Part NoWSC300B50WSC300BWSC300R50WSC300RWSC300G50WSC300GWSC300C50WSC300C
ColourBronzeBronze
RedRed
GreenGreenClearClear
RRP £’s189.004.90
189.004.90
189.004.90
189.004.90
Length50mtr Roll
Cut length per mtr50mtr Roll
Cut length per mtr50mtr Roll
Cut length per mtr50mtr Roll
Cut length per mtr
Welding Strip 300 - 300mm wide x 2mm thick
Replacement Welding Strip 570mm x 1mmRecommended for medium duty areas. Strips are supplied cut to length with four metal eyelets on one edge.Conforms to EN1598 (Excluding clear) and is non combustible.Designed for use on curtain frames, welding bays and pushfit system.
Dark GreenBronzeOrange Clear
Part NoWSC570B18WSC570BWSC570R18WSC570RWSC570G18WSC570GWSC570C18WSC570C
ColourBronzeBronze
RedRed
GreenGreenClearClear
RRP £’s15.659.40
15.659.40
15.659.40
15.659.40
Length1800mm Strip
Cut length per mtr1800mm Strip
Cut length per mtr1800mm Strip
Cut length per mtr1800mm Strip
Cut length per mtr
Welding Strip 570 - 570mm Wide x 1mm Thick
Note - Clear not suitable for protection from welding arcs .
1000mm Wide Blanket 600 Degrees
Part NoWSC1000
ColourGrey
RRP £’s28.80
Length2050mm
600 Degree Blanket
0.7mm Thick Thermo-E-Glass-Filament-Fabric with grey fire retardant PU-coating on one side.Supplied hemmed top and bottom with 5 brass eyeletspressed into top edge.
We can supply material of a higher temperature rating witheyelets. Please ask for details.
www.rapid
welding
.com
Welding Benches & Trestles
18
Two sizes available1200mm Wide x 800mm Deep UDL 250kg
Solid construction with 60mm box section legs and 50mm box section cross members.
Frame epoxy powder coated for tough durable finish.6mm replaceable steel work surface is uncoated making it ideal for welding applications.
2000mm Wide x 1000mm Deep UDL 500kg Constructed with 80mm box section legs and 60mm cross members. 8mm steel work surface.
DescriptionUpper Shelf For WSB128LowerShelf For WSB128Lower Shelf For WSB21
OptionsPart NoWSB128USWSB128LSWSB21LS
Width mmW x D x H
1200 x 800 x 8502000 x 1000 x 850
RRP £’s455.00785.00
Part NoWSB128WSB21
Welding Bench (Excludes shelves see options)
PLEASE NOTEE - Tops for welding are supplied un coated in mill finish condition. We can finish to a polished state with millscale removed if required at additional cost. Ask distributor for details.We offer a bespoke service for welding benches and can manufacture to any size, shape etc
Shown with optional shelves
TrestlesManufactured to same height as our welding benches they providea stable platform for longer workpeices. Use one on its own with abench or as a pair.
Box section construction 60mm box section top beam50mm uprights.Epoxy powder coated
Benches & TrestlesManufactured to tested design.
Can be supplied with test certificate.Ask distributor for details.
www.rapid
welding
.com
Weld Safe Mobile
19
Weld Safe MobileDon't lose time taking the job to the workshop.......take the workshop to the job !The ultimate welding unit for factory environments.
Multi-process capability in one unit ! Suitable for MMA, TIG, PLASMA the Weld Safe Mobileenables repairs to be carried out safely inside or outside the workshop. A 6mm steel topprovides a stable worksurface.Downtime reductions are easily achievable. With storage room inside for consumablesand equipment set up ready response time for breakdowns can be greatly reduced.Our optional fume extraction unit sits neatly in the bottom of the unit and enablesharmful fumes to be removed at source protecting both operator and employees in the adjacent workspace.Our unique optional powercluster assembly is a multi voltage powercluster assembly.We can incorporate a number of power points in 240v, 415v or 110v with transformer fitted.The advantage of the powercluster is you can simply plug into one supply to power upall equipment and have a 110v auxiliary supply if required.The standard welding version has a solid one piece worktop, welding and cutting versionhas cutting grate and water trough to catch sparks.
RRP £’s865.00995.00POAPOA
Weld Safe MobilePart NoWSMWWSMWCWSMFWSMPC
DescriptionStandard Welding Unit
Standard Welding & Cutting UnitOptional Fume ExtractorOptional PowerClusterwww.ra
pidweld
ing.co
m
Cylinder Pallets
20
Constructed from 40mm box section frames and solid 5mm thick steel base these units aremanufactured to withstand the toughest of environments.
Epoxy powder coated in safety yellow for Tough durable finish.
Forklift pockets 165mm x 65mm
Weld Safe cylinder pallets are constructed to withstand the rigours of daily use. They provide a safe method of transporting and storing cylinders in a secure upright position. The range consists of pallets for transporting cylinders through to pallets designed to improve manual handling of welding and cutting equipment.
Individual test certificate can be supplied if required at extra cost.
ConstructionAll Weld Safe pallets are manufactured to a high standard to a proven and tested design. Bases are a one piece CNC folded5mm thick steel plate with main frames fabricated in 40mm x 40mm box sections. For added secureness CNC plasma profile brackets are used to mould to the cylinders shape (excluding 4 cylinder transport pallet) this added feature maintains thecylinders in a perfectly upright position at all times. All pallets are bead blasted and epoxy powder coated in safety yellowfor a durable finish.
Please note dimensions shown for distance between fork pockets on each pallet for compatibility with your forklift truck.
All Weld Safe pallets feature -
Cylinder Transport Pallet (4 x 230mm dia cylinders)
165mm x 65mmFork Pockets
Optional chain securing kit
Heavy duty 5mm basewith no lip for easyloading of cylinders
Cylinders securedby ratchet strap
Please note - gas cylindersand are not included and
are for illustration purposes only
Please note - Pallet can be supplied with
test certificate. Ask distributor for details.
RRP £’s365.009.90
Part NoWSP01WSPCK
Cylinder Capacity4 x 230 dia cylindersOptional Chain Kit
Dimensions mmW x D x H
900 x 625 x 1000
Distance betweenfork pockets
550mmType4 Cylinder Pallet
www.rapid
welding
.com
Oxygen / Fuel Gas Cutting Pallet
21
Heavy duty transport pallet for Oxygen / Fuel Gas cylindersShaped cylinder bracket for secure holding of cylindersBrackets to hold up to 40mtr hose setMade to withstand tough environments40mm box section frames and a one piece 5mm thick base plate 165mm x 65mm fork lift pockets Frame epoxy powder coated for tough durable finish.Optional chain securing kit
.
Mobilise your cutting equipment quickly and safely
Available for use with either acetylene or propane fuel gases cutting pallet enables the operator to move his equipment to the work area quickly.Hanging brackets allow in excess of 40mtrs of 10mm bore hose to be carriedgiving a large working radius potential. Solid footprint provides a stable and safe unit supporting the cylinders upright and reducing the risk of damage toequipment. Cylinders are held securely in place by ratchet strap.
Capacity1 Oxygen 230mm dia /
1 Acetylene upto 290mm dia
1 Oxygen 230mm dia / 1 Propane upto 390mm dia
Optional Chain Kit
RRP £’s465.00
487.00
9.90
Oxygen / Fuel Gas PalletPart NoWSPA
WSPP
WSPCK
Dimensions mmW x D x H
960 x 625 x 1000
1000 x 625 x 1000
Distance betweenfork pockets
620mm
670mm
TypeOxygen / Acetylene
Oxygen / Propane
Please note - Pallet can be supplied with
test certificate. Ask distributor for details.
Please note - gas cylindersand equipment are not
included and are for illustration purposes only.
www.rapid
welding
.com
Oxygen / Fuel Gas Reel Pallet
22
Heavy duty transport pallet for Oxygen / Fuel Gas cylindersShaped cylinder bracket for secure holding of cylindersNederman retractable hose reel fitted with 15mtr 10mm bore hose setMade to withstand tough environments40mm box section frames and a one piece 5mm thick base plate Frame epoxy powder coated for tough durable finish.Optional chain securing kit
Mobilise your cutting equipment quickly and safely
Our reel pallet enables the operator to move his equipment to the work areaquickly. The fitted hose reel gives a 15mtr working radius and once finished with is quickly stored safely back onto the reel. This combination means fast set up times and reduces the risk of damage to equipment.
Please note - gas cylindersand equipment are not
included and are for illustration purposes only.Price includes pallet and
hose reel only.
Please note - Pallet can be supplied with
test certificate. Ask distributor for details.
Capacity1 Oxygen 230mm dia /
1 Acetylene upto 290mm dia
1 Oxygen 230mm dia / 1 Propane upto 390mm dia
Optional Chain Kit
RRP £’s1295.00
1365.00
9.90
Oxygen / Fuel Gas Reel PalletPart NoWSPAR
WSPPR
WSPCK
Dimensions mmW x D x H
960 x 625 x 1000
1000 x 625 x 1000
Distance betweenfork pockets
620mm
670mm
TypeOxygen / Acetylene
Oxygen / Propane
www.rapid
welding
.com
Machine Pallet
23
Shaped cylinder bracket for secure holding of cylindersBrackets to hold tig filler wire packsLockable storageBrackets for holding leads, torches etcMade to withstand tough environments40mm box section frames and a one piece 5mm thick base plate 165mm x 65mm fork lift pockets Frame epoxy powder coated for tough durable finishOptional chain securing kit
Please note - gas cylindersand equipment are not
included and are for illustration purposes only
Mobilise your welding plant quickly and safely
Our machine pallet enables MMA / TIGG welding plant to be transported easily around site. With room for two gas cylinders it is ideal where applications require purge gas as well as machine gas. Built into the base is a locker to hold consumables and safety equipment.Also suitable as a means of mobilising Plasma Cuttingequipment placing two cylinders of compressed air on board.
Please note - Pallet can be supplied with
test certificate. Ask distributor for details.
Machine PalletCapacity
2 x 230 dia cylinders Optional Chain Kit
RRP £’s695.009.90
Part NoWSPM4WSPCK
Machine SpaceThe shelf designed to house the machine has following dimensions -Internal Width 700mm Internal Depth 260mm Recommended Maximum Height 600mm
Dimensions mmW x D x H
960 x 625 x 1000
Distance betweenfork pockets
620mmTypeMachine Pallet
www.rapid
welding
.com
Cutting Unit
24
The Weld Safe oxy / fuel gas cutting unit is the ideal solution for demanding on site applications.
Heavy duty all steel construction means the unit can easilywithstand the rigours of daily use on factory and construction sites. With a footprint size of 900mm sq itprovides a stable platform for equipment, reducing the risk of falling cylinders when compared to traditional cylinder trolleys. Forklift pockets all around and lifting eye are standard.
The unit houses two oxygen and one fuel gas cylinder providing extended cutting time in-between cylinder changeovers. Regulators are mounted on a manifold assembly and cylinder connections are via flexible hoses. Thisreduces the risk of damage during cylinder change over. Very often in cutting applications regulators without gauges are fitted due to the risk of damage and frequency of replacement. With our system, twin gauge regulators are a more viable option enhancing safety. Two of the major causes of flashbacks are incorrect pressure settings and damaged equipment.
Part NoWSPUA
WSPUPWSPCK
Cylinder Capacity 2 Oxygen 230mm dia
1 Acetylene 285mm dia
2
Chain Fixing Kit
Oxygen 230mm dia1 Propane 350mm dia
Dimensions (mm)L x W x H
900 x 900 x 2000
900 x 900 x 2000
RRP £’sPOA
POA
Locking doors front and back means the Weld Safe cutting unit provides the ultimate in security on site. Not only does our unit provide security from theft but also from unauthorised use by untrained personnel.
www.rapid
welding
.com
Cylinder Storage
25
230mm Dia Cylinder Wall Brackets
3mm steel constructionShaped to provide stable support
Steel constructionShaped to provide stable supportCylinders secured with chainEpoxy powder coated
Part NoWSWB1230WSWB2230
Cylinder Capacity1 x 230mm dia2 x 230mm dia
RRP £’s26.8041.80
O/A Width335mm650mm
Part NoWSWB3230WSWB4230
Cylinder Capacity3 x 230mm dia4x 230mm dia
RRP £’s52.8062.80
O/A Width965mm
1250mm
Cylinders secured with chain.Epoxy powder coated.
Part NoWSWB1380WSWB2380
Cylinder Capacity1 x 380mm dia2 x 380mm dia
RRP £’s32.8059.80
O/A Width485mm950mm
Part NoWSWB1285WSWB2285
Cylinder Capacity1 x 285mm dia2 x 285mm dia
RRP £’s29.8054.80
O/A Width385mm750mm
Steel constructionShaped to provide stable supportCylinders secured with chainEpoxy powder coated
Ideal for fixed cutting / heating equipmentSteel constructionShaped to provide stable supportCylinders secured with chain.Epoxy powder coated.
Part NoWSWBOA
Cylinder Capacity1 x 230mm dia1 x 285mm dia
RRP £’s48.80
O/A Width695mm
Ideal for fixed cutting / heating equipmentSteel constructionShaped to provide stable supportCylinders secured with chain.Epoxy powder coated.
Steel constructionShaped to provide stable supportCylinders secured with chain.Solid 3mm steel base Epoxy powder coated
Six cylinder freestanding rack 230mm dia cylinders Single Cylinder Stand 230mm dia cylinder
Single side cylinder rack 230mm dia cylinders
Double sided cylinder rack 230mm dia cylinders
Steel constructionShaped to provide stable supportCylinder secured with chain.450mm x 450mm 5mm thick baseEpoxy powder coated.
Steel constructionShaped to provide stable support40mm x 40mm section frames
Part NoWSR6230FS
CylinderCapacity
6 x 230mm diaRRP £’s289.40
DimensionsW x D x H
960 X 650 X 920
Fixing lugs for floor and wall Cylinders secured with chainEpoxy powder coated
Part NoWSR1230FS
CylinderCapacity
1 x 230mm diaRRP £’s108.80
DimensionsW x D x H
450 x 450 x 800
Part NoWSR2230WSR3230WSR4230
CylinderCapacity
2 x 230mm dia3 x 230mm dia4 x 230mm dia
RRP £’s179.80189.80199.80
DimensionsW x D x H
650 x 315 x 910 970 x 315 x 910
1200 x 315 x 910
Part NoWSR4230DWSR6230DWSR8230D
CylinderCapacity
4 x 230mm dia6 x 230mm dia8 x 230mm dia
RRP £’s214.80229.80249.80
DimensionsW x D x H
650 x 590 x 910970 x 590 x 910
1200 x 590 x 910
www.rapid
welding
.com
27
SPECIFICATIONIn the interest of continuous product improvement, specifications and descriptions in this catalogue are given in good faithbut may change without notice and do not form any part of a sale contract.
PRICE & DELIVERYAll prices exclude VAT and DELIVERY.Carriage charges can be obtained by contacting our sales office.Prices are correct at time of going to press and can be subject to change without notice.
RETURNSGoods to be returned will only be accepted by agreement with our sales office. Goods manufactured specifically for a customer will not be accepted for credit.
A full copy of our Conditions of Sale is available upon request.
