Date post: | 28-Oct-2014 |
Category: |
Documents |
Upload: | amaruch-benali |
View: | 177 times |
Download: | 13 times |
wwwhuaweicom Huawei confidential 2007-10
Huawei GENEX SeriesHuawei GENEX Series
2wwwhuaweicom Huawei confidential 2007-10
2
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
3wwwhuaweicom Huawei confidential 2007-10
3
RNCRNC
GENEX U-NetGENEX U-Net Radio Network Planning Radio Network Planning ToolTool
Downlink Downlink + + UplinkUplink
GENEX ProbeGENEX ProbeGENEX AssistantGENEX AssistantTest amp Post-Process ToolsTest amp Post-Process Tools
GENEX NastarGENEX NastarNetwork Performance Analysis Network Performance Analysis SystemSystem
GENEX U-Net is a radio planning tool that fully supports the technologies of GSMGPRS-EDGE CDMA IS95 WCDMAUMTSHSDPAHSUPA CDMA 20001xRTT1xEVDO and TD-SCDMA wireless networks
The GENEX Probe network optimization and drive test data collection system is an air interface test tool for WCDMAHSDPAHSUPAGSMGPRS networks GENEX Assistant is a professional wireless test data post-processing software system
GENEX Nastar is a platform for monitoring and optimizing the performance of GSMCDMAWCDMA wireless networks
Huawei GENEX Family
4wwwhuaweicom Huawei confidential 2007-10
4
Whole Flow Overview
Radio Network Planning Radio Network Planning ToolTool
Air Interface Test Tool and Air Interface Test Tool and Post-Processing ToolPost-Processing Tool
Network Performance Network Performance Analysis ToolAnalysis Tool
Make full use of 2G resources
GENEX covers the GENEX covers the network lifecyclenetwork lifecycleGENEX covers the GENEX covers the network lifecyclenetwork lifecycle
5wwwhuaweicom Huawei confidential 2007-10
5
GENEX Partners in The WorldGENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality
The network operators include but not limited to China Mobile China Unicom China Telecom China Netcom Vodafone PBTL T-Mobile Orange CellPlus PCCW(Sunday) Telecom eMobile
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators advancing with customers hand by hand
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
2wwwhuaweicom Huawei confidential 2007-10
2
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
3wwwhuaweicom Huawei confidential 2007-10
3
RNCRNC
GENEX U-NetGENEX U-Net Radio Network Planning Radio Network Planning ToolTool
Downlink Downlink + + UplinkUplink
GENEX ProbeGENEX ProbeGENEX AssistantGENEX AssistantTest amp Post-Process ToolsTest amp Post-Process Tools
GENEX NastarGENEX NastarNetwork Performance Analysis Network Performance Analysis SystemSystem
GENEX U-Net is a radio planning tool that fully supports the technologies of GSMGPRS-EDGE CDMA IS95 WCDMAUMTSHSDPAHSUPA CDMA 20001xRTT1xEVDO and TD-SCDMA wireless networks
The GENEX Probe network optimization and drive test data collection system is an air interface test tool for WCDMAHSDPAHSUPAGSMGPRS networks GENEX Assistant is a professional wireless test data post-processing software system
GENEX Nastar is a platform for monitoring and optimizing the performance of GSMCDMAWCDMA wireless networks
Huawei GENEX Family
4wwwhuaweicom Huawei confidential 2007-10
4
Whole Flow Overview
Radio Network Planning Radio Network Planning ToolTool
Air Interface Test Tool and Air Interface Test Tool and Post-Processing ToolPost-Processing Tool
Network Performance Network Performance Analysis ToolAnalysis Tool
Make full use of 2G resources
GENEX covers the GENEX covers the network lifecyclenetwork lifecycleGENEX covers the GENEX covers the network lifecyclenetwork lifecycle
5wwwhuaweicom Huawei confidential 2007-10
5
GENEX Partners in The WorldGENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality
The network operators include but not limited to China Mobile China Unicom China Telecom China Netcom Vodafone PBTL T-Mobile Orange CellPlus PCCW(Sunday) Telecom eMobile
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators advancing with customers hand by hand
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
3wwwhuaweicom Huawei confidential 2007-10
3
RNCRNC
GENEX U-NetGENEX U-Net Radio Network Planning Radio Network Planning ToolTool
Downlink Downlink + + UplinkUplink
GENEX ProbeGENEX ProbeGENEX AssistantGENEX AssistantTest amp Post-Process ToolsTest amp Post-Process Tools
GENEX NastarGENEX NastarNetwork Performance Analysis Network Performance Analysis SystemSystem
GENEX U-Net is a radio planning tool that fully supports the technologies of GSMGPRS-EDGE CDMA IS95 WCDMAUMTSHSDPAHSUPA CDMA 20001xRTT1xEVDO and TD-SCDMA wireless networks
The GENEX Probe network optimization and drive test data collection system is an air interface test tool for WCDMAHSDPAHSUPAGSMGPRS networks GENEX Assistant is a professional wireless test data post-processing software system
GENEX Nastar is a platform for monitoring and optimizing the performance of GSMCDMAWCDMA wireless networks
Huawei GENEX Family
4wwwhuaweicom Huawei confidential 2007-10
4
Whole Flow Overview
Radio Network Planning Radio Network Planning ToolTool
Air Interface Test Tool and Air Interface Test Tool and Post-Processing ToolPost-Processing Tool
Network Performance Network Performance Analysis ToolAnalysis Tool
Make full use of 2G resources
GENEX covers the GENEX covers the network lifecyclenetwork lifecycleGENEX covers the GENEX covers the network lifecyclenetwork lifecycle
5wwwhuaweicom Huawei confidential 2007-10
5
GENEX Partners in The WorldGENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality
The network operators include but not limited to China Mobile China Unicom China Telecom China Netcom Vodafone PBTL T-Mobile Orange CellPlus PCCW(Sunday) Telecom eMobile
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators advancing with customers hand by hand
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
4wwwhuaweicom Huawei confidential 2007-10
4
Whole Flow Overview
Radio Network Planning Radio Network Planning ToolTool
Air Interface Test Tool and Air Interface Test Tool and Post-Processing ToolPost-Processing Tool
Network Performance Network Performance Analysis ToolAnalysis Tool
Make full use of 2G resources
GENEX covers the GENEX covers the network lifecyclenetwork lifecycleGENEX covers the GENEX covers the network lifecyclenetwork lifecycle
5wwwhuaweicom Huawei confidential 2007-10
5
GENEX Partners in The WorldGENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality
The network operators include but not limited to China Mobile China Unicom China Telecom China Netcom Vodafone PBTL T-Mobile Orange CellPlus PCCW(Sunday) Telecom eMobile
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators advancing with customers hand by hand
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
5wwwhuaweicom Huawei confidential 2007-10
5
GENEX Partners in The WorldGENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality
The network operators include but not limited to China Mobile China Unicom China Telecom China Netcom Vodafone PBTL T-Mobile Orange CellPlus PCCW(Sunday) Telecom eMobile
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators advancing with customers hand by hand
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
6wwwhuaweicom Huawei confidential 2007-10
6
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for HSDPA HSUPA DT Data
Collection
Other Features
Case Study
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
7wwwhuaweicom Huawei confidential 2007-10
7
GENEX Probe drive test system
GARMIN SeriesGPS
DTI Scanner(Built-in GPS)
Anritsu Scanner
Trimble SeriesGPS
Qualcomm TM6250 6275
AT Command Supported
Mobile
Huawei WCDMAHSDPA Data
card
Support WCDMA 850900180019002100
Mhz
Equipment Composition
support multi UE carry out different tests simultaneously
Physical connection
Equipment bag
easy to carry and suitable to be used
in the car
Huawei Dual Mode Mobile(U626U636)
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
8wwwhuaweicom Huawei confidential 2007-10
8
Contents
GENEX Overview
GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
9wwwhuaweicom Huawei confidential 2007-10
9
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware
key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
10wwwhuaweicom Huawei confidential 2007-10
10
Probe InterfaceProbe Interface
Workspace AreaNavigation
Area
Status Area
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
11wwwhuaweicom Huawei confidential 2007-10
11
Probe Interface
Navigation View
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
12wwwhuaweicom Huawei confidential 2007-10
12
Project Template
Project Template
Site Verification
Optimize
Benchmark
Acceptance
Customize
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
13wwwhuaweicom Huawei confidential 2007-10
13
Hardware configuration In Navigation Area
Hardware Configuration Before Test
Hardware Configuration Before Test
Connect and config devices one by one
HardwareTest
DeleteDevice
AddDevice
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
14wwwhuaweicom Huawei confidential 2007-10
14
Hardware configuration
PS domain tests (Data Service) need set Modem port
Hardware Configuration Before Test
Hardware Configuration Before Test
Hardware Configuration Test
HardwareTest
Devices status bar
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
15wwwhuaweicom Huawei confidential 2007-10
15
Hardware configuration ndash Windows port allocation (port number)
Hardware Configuration Before Test
Hardware Configuration Before Test
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
16wwwhuaweicom Huawei confidential 2007-10
16
Hardware configuration ndash General Parameters ndash Personal Main Cities Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner DTI WCDMA (8690-8940 MHz)
115200 A definir A definir A definir
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
17wwwhuaweicom Huawei confidential 2007-10
17
Hardware configuration ndash General Parameters ndash Personal Acceptance Test
Hardware Configuration Before Test
Hardware Configuration Before Test
Device Type Model Baudrate
Com Port
Modem Port
MSISDN
UE1 UE HUAWEI U1205 230400 A definir A definir A definir
UE2 UE HUAWEI U1205 230400 A definir A definir A definir
UE3 UE HUAWEI E270 Card
230400 A definir A definir A definir
No es el modelo pero funciona adecuadamente
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
18wwwhuaweicom Huawei confidential 2007-10
18
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
19wwwhuaweicom Huawei confidential 2007-10
19
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs
System Configuration Before TestSystem Configuration Before Test
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
20wwwhuaweicom Huawei confidential 2007-10
20
Log Mask setting ndash General Parameters ndash Personal Main Cities Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
Scanner1
Limited Time (Minutes) 15 A convenir
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
21wwwhuaweicom Huawei confidential 2007-10
21
Log Mask setting ndash General Parameters ndash Personal Acceptance Test
Log Mask Setting Before TestLog Mask Setting Before Test
Device Limit Size Type Minutes Log File Directory
UE1 Limited Time (Minutes) 15 A convenir
UE2 Limited Time (Minutes) 15 A convenir
UE3 Limited Time (Minutes) 15 A convenir
Log item Setting Valores que aparecen por defecto
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
22wwwhuaweicom Huawei confidential 2007-10
22
System Configuration Before TestSystem Configuration Before Test
Event setting
We can define the event we need through Event setting
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
23wwwhuaweicom Huawei confidential 2007-10
23
System Configuration Before TestSystem Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
24wwwhuaweicom Huawei confidential 2007-10
24
System Configuration Before TestSystem Configuration Before Test
Other settingWe can set the Time Record Mode for a Log Packet GPS synchronization Mode DialUp Property for Data Service Display Filter for Log Data Replay Mode for Event and Parameters for DTI Scanner which we need through other setting
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
25wwwhuaweicom Huawei confidential 2007-10
25
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as RSCP
and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
26wwwhuaweicom Huawei confidential 2007-10
26
Test Plan ConfigurationControl each devices behavior by selecting Test Plan items and setting property parameters of each test items
Test Plan Configuration Before Test
Test Plan Configuration Before Test
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
27wwwhuaweicom Huawei confidential 2007-10
27
Test Plan Configuration ndash Add amp Config Scenarios for UESet the Test Plan respectively for each device (UEScanner)
Test Plan Configuration Before Test
Test Plan Configuration Before Test
1 Select Test
Device2 Add Test
Scenario
3 Add Test Item
4 Set Test
Properties
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
28wwwhuaweicom Huawei confidential 2007-10
28
Test Plan Configuration ndash Auto Call scenario
Test Plan Configuration Before Test
Test Plan Configuration Before Test
To modify the
scenario To run scenario
automatically
Check the
enable status
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
29wwwhuaweicom Huawei confidential 2007-10
29
Test Plan Configuration ndash Add amp Config Scenarios for DTI Scanner
1 Select Test Item
2 Set Item Property
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the
enable status
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
30wwwhuaweicom Huawei confidential 2007-10
30
Set Test Plan for UE1 Voice call
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Suggestion When testing voice call do not perform PS dialup on the Modem of the outgoing UE manually Otherwise voice call maybe hangs up abnormallyThe UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test Thus the CS and PS concurrent test can be performed on the same UE
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
31wwwhuaweicom Huawei confidential 2007-10
31
Test Plan Configuration Before Test
Parameters for Voice Call
Call type
Continuous Call The call continues if it does not fail drop or hang up If the call fails drops or hangs up Probe waits for a call interval to originate another call
Call by Call call The call lasts and waits for the predetermined calling duration and call interval and repeats for the times defined in call count
Setup time the maximum time for call setup If the call cannot be setup within the defined period the call setup fails
Calling duration the duration of one call from call setup to call normal release (apply only to call by call)
Call interval the time between two calls from the previous call disconnection to the beginning of the next call
Exceptional Interval The interval between the exceptional end of a call drop and the beginning of the next call
Count Mode the limitations on the call number -gt Finite Infinite
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
32wwwhuaweicom Huawei confidential 2007-10
32
Set Test Plan for UE2 Ftp Upload Ftp Download
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Note PS connection can be set up by one FTP Download test item if correct APN has been set in UE
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
33wwwhuaweicom Huawei confidential 2007-10
33
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
User Password FTP user name and password For anonymous login also need to input ldquoanonymousrdquo as username
Remote File Destination file address input the detailed download path such as ftp10001download1dat
Local File Local path to save the download file such as C1dat
MultiTask Count When we use multi-threading download set the number of threads here
Test Interval (sec) The time interval between multi downloads After finishing a download wait for several time then start another download test
FTP Count the total number of ftp download test
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
34wwwhuaweicom Huawei confidential 2007-10
34
Parameters for Ftp Download Ftp Upload
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Disconnection Mode the mode of Disconnection there are three choices
Keep Disconnected Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely just wait for interval time then continue next ftp download test
Disconnect By Time Perform PDP context deactivation periodically The period for the PDP context deactivation is represented by the Valid FTP Duration parameter If the target files are not loaded completely within the predefined time the loading result shows timeout Probe considers this loading as failure and initiates another PDP context deactivation in the next loading
Disconnect After Transfer Complete Each time when the file load is complete PDP context deactivation would be performed
FTP QoS Indicates the type of the traffic as 1048698 Background class 1048698 Conversational class 1048698 Interactive class 1048698 Streaming class 1048698 Subscribed class
FTP Upload Parameters are the same with FTP downloadrsquos Probe will upload the local file to the destination path automatically Make sure you have the authority to upload file before test
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
35wwwhuaweicom Huawei confidential 2007-10
35
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
If leave APN QoS parameters blank
Probe wonrsquot send the associated command to the UE if the parameters mentioned above is not set that is the UErsquos default setting will be maintained
Methods for setting APN QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information because AT command in MODEM initial command is send to UE more closely before PS connection setup it will replace the information send to UE by Probe That is Probersquos setting doesnrsquot work if AT command also exists in the MODEM initial command
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
36wwwhuaweicom Huawei confidential 2007-10
36
Test Plan Configuration Before Test
Test Plan Configuration Before Test
About APN QoS Setting
Method 1 (By Windows) Method 2 (by Probe)
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
37wwwhuaweicom Huawei confidential 2007-10
37
Set Test Plan Configuration for DTI Scanner
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Check the enable status
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
38wwwhuaweicom Huawei confidential 2007-10
38
Test Plan Voice Call Short Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE1
Scenario Name Short Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 60
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
39wwwhuaweicom Huawei confidential 2007-10
39
Test Plan Voice Call Long Call ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE2
Scenario Name Long Call
Test Item Voice Call
Destination A definir
Call Type Call by Call
Setup Time(sec) 20
Call Duration(sec) 180
Call Interval(sec) 10
Exceptional Interval(sec) 20
Count Mode Infinite
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
40wwwhuaweicom Huawei confidential 2007-10
40
Test Plan FTP Test Download ndash General Parameters ndash Personal Main Cities and Acceptance Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
UE UE3
Scenario Name FTP Download
Test Item Ftp Download
Port 21
User A definir
Password A definir
Remote File A definir
Write Local File False
MultiTask Count5
Test Interval(sec) 5
Ftp Count 999
Disconnection Mode Disconnected after transfer complete
Traffic Class Background Class
UL Max Rate(Kbps)
DL Max Rate(Kbps)
APN
gprspersonalcom
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
41wwwhuaweicom Huawei confidential 2007-10
41
Test Plan Scanner ndash General Parameters ndash Personal Main Cities Test
Test Plan Configuration Before Test
Test Plan Configuration Before Test
Scanner Scanner1
Item Name TopN Pilot Scan Enable TRUE
Channel A convenir Measure Rake Finger Count FALSE
Scanner Type A convenir Measure SIR TRUE
Pilot Number(N) 10
Correlation Taps 1
Chip Window Size 32
PNThreshold(dB) -205
ScanRate(ms) 100
Measure EcIo TRUE
Measure Time Offset FALSE
Measure Aggregate EcIo TRUE
Measure Delay Spread FALSE
Measure EpsIo FALSE
Measure EssIo FALSE
Los demas Item Name (Pilot Scan Spectrum Analysis CW SCH Scan RSSI 384M) deben estar en FALSE en la opcion de Enable
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
42wwwhuaweicom Huawei confidential 2007-10
42
DT Operation Flow
1 Probe Installation2 Plug Probe dongle (Must be installed Shared ndash Hardware key) 3 Connect Hardware device to the laptop4 Hardware device configuration5 System Configuration (Set Log mask)6 Test Plan Configuration7 Open the parameter widows you want to observe such as
RSCP and EcIo in Active Set Monitor Set HSDPA Serving Cell throughput RRC Message NAS Message etc
8 Import engineering parameters open Map window and import the related Mapinfo file (TAB) (Routes Streets etc)
9 Start Test start recording10 After the test finished press Stop Testldquo button
Notes If you dont use Test Plan to start test automatically please Start Testrdquo first then start to make call test
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
43wwwhuaweicom Huawei confidential 2007-10
43
Common used windows for HSDPA amp R99
Parameter Window
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
44wwwhuaweicom Huawei confidential 2007-10
44
WCDMA - Serving Active Set amp Neighboring Cells
Parameter Window
bullDisplay PSC RSCP EcIo for active set monitor set and detective set
bullIn the figure rectangle legend implicates active set data circle implicates monitor set data and triangle implicates detected set data The data of the same type is distinguished from each other with different colors Move the mouse to a place to get the scrambling code of the current point
bullWhen the UE is in idle state PSC in active set is about the cell where the UE resides
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
45wwwhuaweicom Huawei confidential 2007-10
45
WCDMA - Power Control
Parameter Window
DL SIR SIR Target
Rx UE received power
Tx UE tx power
ULDL transmit power control
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
46wwwhuaweicom Huawei confidential 2007-10
46
WCDMA - WCDMA BLER
Parameter Window
Displays BLER of different transport channels
In HSDPA connection mode A-DPCHs DL BLER is being displayed
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
47wwwhuaweicom Huawei confidential 2007-10
47
WCDMA - HSDPA Link Statistic
Parameter Window
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
48wwwhuaweicom Huawei confidential 2007-10
48
Message - MACRLC MessagesThe MACRLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC) The messages are visible only when the associated items in LogMask are selected
Parameter Window
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
49wwwhuaweicom Huawei confidential 2007-10
49
Message - RRC Messages
All the UEs or single UE are displayed on the window The messages selected on the left navigation tree are displayed The detailed information is displayed by double-clicking on the message
Parameter Window
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
50wwwhuaweicom Huawei confidential 2007-10
50
Message - NAS Messages
Whatever mode UE is in WCDMA HSDPA or GSM all the NAS messages are displayed here as follow
Parameter Window
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
51wwwhuaweicom Huawei confidential 2007-10
51
Parameter Window
Top N Pilot test
Scanner ndash TopN Pilot amp Spectrum
Analysis
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
52wwwhuaweicom Huawei confidential 2007-10
52
Data Service - App Throughput
Display both UL and DL application layer data rate NAS rate and TCP retransmission rate
Parameter WindowParameter Window
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
53wwwhuaweicom Huawei confidential 2007-10
53
Data Service - RLC Throughput
Display both UL and DL RLC layer throughput UL PDU retransmission ratio and DL PDU error ratio
Parameter WindowParameter Window
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
54wwwhuaweicom Huawei confidential 2007-10
54
Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service including Login time download time download rate etc
Parameter WindowParameter Window
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
55wwwhuaweicom Huawei confidential 2007-10
55
UE State Displays the information of the mobile status and network parameters (cell rnc MCC MNC LAC RAC)
Parameter WindowParameter Window
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
56wwwhuaweicom Huawei confidential 2007-10
56
Information Displays the information of hardware used and the test plan running
Parameter WindowParameter Window
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
57wwwhuaweicom Huawei confidential 2007-10
57
Map Window
Parameter WindowParameter Window
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
58wwwhuaweicom Huawei confidential 2007-10
58
Map Window ndash Load WCDMA sites
Parameter WindowParameter Window
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
59wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
60wwwhuaweicom Huawei confidential 2007-10
60
Contents
Case1 Inter-RAT handover test
Case2 WCDMA inter-frequency handover test
Case3 Multi-frequency Scanning
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
61wwwhuaweicom Huawei confidential 2007-10
61
Case1 Inter-RAT handover test
Inter-RAT handover test
Event observation mdash Location of handover point
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
62wwwhuaweicom Huawei confidential 2007-10
62
Case1 Inter-RAT handover test
Messages and measurement from different networks
Inter-RAT handover
Time of Handover signaling
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
63wwwhuaweicom Huawei confidential 2007-10
63
Case2 WCDMA inter-frequency handover test
The signal frequency in active set is
213740 when the test starts
WCDMA inter-frequency handover
Log file
Signaling window
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
64wwwhuaweicom Huawei confidential 2007-10
64
Case2 WCDMA inter-frequency handover test
Signaling observation
before handover
WCDMA inter-frequency handover process
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
65wwwhuaweicom Huawei confidential 2007-10
65
Case2 WCDMA inter-frequency handover test
Observe it again and the frequency handover to
213240
WCDMA inter-frequency handover process
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
66wwwhuaweicom Huawei confidential 2007-10
66
Case3 Multi-frequency Scanning
1 Set multi-frequency
Simultaneous scanning of multi-frequency
2 Scanned multi-frequency
3 Select specified frequency to observe it
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
67wwwhuaweicom Huawei confidential 2007-10
67
Case3 Multi-frequency Scanning
Simultaneous observation of different
frequencies
Simultaneous scanning of multi-frequency
wwwhuaweicom Huawei confidential 2007-10
wwwhuaweicom Huawei confidential 2007-10