LAST UPDATED: 12/04/2018
LED Work Light and Bracket - Replacement Guide
AD0264
Introduction
Work Lights that don't need a replacement bracketA new bracket is not necessary to install a replacement LED work light for machines that have these work lightsinstalled. Brackets may need to be bent out or bent in to accommodate the width difference between light vendors.
INSTALLEDLEDWORKLIGHTP/ N
DESCRIPTION IMAGE
REPLACEMENTLEDWORKLIGHTP/N
DESCRIPTION
32-0404 LAMP LED 20WATT 7X7 93-32-0404
LED LAMPASSEMBLYSLIM 20W7X7
32-0405 LAMP LED 30WATT 9X9 93-32-0405
LED LAMPASSEMBLYSLIM 30W9X9
32-0416 LAMP LED 50WATT 11X11 93-32-0416
LED LAMPASSEMBLYSLIM 50W11X11
This document tells you which LED work light andbracket is necessary when you replace an LEDwork light. Use this guide for work lights thathave a cable with a male C14 connector [1].
LED Work Light and Bracket - Replacement Guide - AD0264
Page 1 of 6 pages
Work Lights that need a replacement bracketMachines that have P/N 30-11333, LED LAMP ASSY or P/N 32-0393, LED ROUND LAMP W/POTTED CABLE installed.
A bracket is necessary to install a replacement LED work light for machines that have these work lights installed.Brackets may need to be bent out or bent in to accommodate the width difference between light vendors
Refer to the tables that follow to find the correct work light and bracket. Brackets may need to be bent out or bent into accommodate the width difference between light vendors.
LED Work Light and Bracket - Replacement Guide - AD0264
Page 2 of 6 pages
Mills that have P/N 30-11333 LED LAMP ASSY or P/N 32-0393 LED ROUND LAMP W/POTTED CABLE installed
LED Work Light and Bracket - Replacement Guide - AD0264
Page 3 of 6 pages
MACHINEMODEL WORKLIGHT DESCRIPTION QTY. BRACKET DESCRIPTION QTY. IMAGE
VF-1/2
VM-293‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
2 25‑11011A
BRACKET
LED 20W2
VF-3/4/5
VM-393‑32‑0405
LED LAMPASSEMBLY
SLIM 30W9X9
2 25‑11012A
BRACKET
LED 30W2
VF-6-12
VM-693‑32‑0416
LED LAMPASSEMBLY
SLIM 50W11X11
2 25‑11112
BRACKET
LED 50W2
UMC-750 93‑32‑0405
LED LAMPASSEMBLY
SLIM 30W9X9
1 25‑11012A
BRACKET
LED 30W1
MMill2
SMMill293‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
2 25‑11011A
BRACKET
LED 20W2
DT/DM-10 93‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
1 25-12168
BRACKET
LED 20W
(DT,DM,OM)
1
OM-1/2 93‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
1 25-12168
BRACKET
LED 20W
(DT,DM,OM)
1
LED Work Light and Bracket - Replacement Guide - AD0264
Page 4 of 6 pages
EC-1600 93-2378
SERVICE KITLAMP LED 20WATTMAGNET
4 Includedin 93-2378 N/A N/A
GR-510
GR71293‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
1 25-12086
BRACKET
LED 20WLATHE
1
LED Work Light and Bracket - Replacement Guide - AD0264
Page 5 of 6 pages
Lathes that have P/N 30-11333 LED LAMP ASSY installed.
MACHINEMODEL WORKLIGHT DESCRIPTION QTY. BRACKET DESCRIPTION QTY. IMAGE
ST-10 93‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
1 25-12086
BRACKET
LED 20W1
ST‑20/25
ST‑30/35
DS-30
93‑32‑0404
LED LAMPASSEMBLY
SLIM 20W7X7
1 25-12086
BRACKET
LED 20WLATHE
1
93‑32‑0416
LED LAMPASSEMBLY
SLIM 50W11X11
1 25-11112
BRACKET
LED 50W1
ST-40/45
93-2378
SERVICE KIT
LAMP LED
20 WATTMAGNET
1Includedin93-2378
N/A 1
ST-50/55 93‑32‑0416
LED LAMPASSEMBLY
SLIM 50W11X11
2 25-11112
BRACKET
LED 50W2
TL-1/2 93-2378
SERVICE KIT
LAMP LED
20 WATTMAGNET
1Includedin93-2378
N/A 1
LED Work Light and Bracket - Replacement Guide - AD0264
Page 6 of 6 pages