InvitoInvitation Zogno, 28-30.09.2016
CMS è lieta di invitarvi a visitare i suoi stabilimenti dove sarà esposta la più recente e innovativa gamma di termoformatrici e centri di lavoro a CNC per il settore della
termoformatura.
Sarà un’opportunità per vedere le nuove termoformatrici BR5 con prove di “pressure forming” e termoformatura sotto vuoto oltre a demo dedicate al taglio su pezzi termoformati con il Centro di
lavoro ATOM e lavorazioni su alluminio con il Centro di lavoro ARES.
L’uffi cio commerciale CMS sarà a Vostra disposizione per organizzare la Vostra visita.
Durante la manifestazione lo staff di vendita ed i tecnici CMS saranno a vostra disposizione per qualsiasi informazione.
CMS is pleased to invite you to visit our factory, where we will be exhibiting our most recent and innovative range of vacuum and pressure forming machines and CNC machining centres for the
thermoforming industry.
Don’t miss the opportunity to see the new BR5 thermoforming machines during the pressure forming and vacuum forming process and the demostration of thermoformed pieces cutting on CNC machining centre
ATOM and aluminium processing on CNC machining centre ARES.
CMS sales department will be at your complete disposal for the organization of your visit.
During our Open House CMS technicians and salesmen will be pleased to discuss your requirements.
COME RAGGIUNGERCIHOW TO REACH US
AeroportiAirports
Milano Malpensa 100 kmMilano Linate 65 kmBergamo Orio al Serio 20 kmBrescia Montichiari 80 kmVerona Villafranca 120 km
AutostradaMotorway
A4 Milano/VeneziaUscita Dalminedirezione Val Brembana
A4-Milan/VeniceExit: DalmineValle Brembana direction
TreniRailway station
Bergamo 20 km
GPS°47’17.6”N 9°38’31.7”E
InvitoInvitation Zogno, 28-30.09.2016
Via A. Locatelli, 123 - 24019 Zogno (Bg) - ItalyTel. +39.0345.64278 - Fax +39.0345.64280 [email protected] • www.cmsindustries.it
Bergamo
TERMOFORMATRICI
VACUUM AND PRESSURE FORMING MACHINES
CENTRI DI LAVORO A CONTROLLO NUMERICO
CNC MACHINING CENTRE
BR5 1512 HP Funzionante con demo / Working demos
BR5 3525 S
BR7 1290
BR5 2520 S
In montaggio / On show
BR5 3020 SIn montaggio / On show
BR5 1510
In montaggio / On show
BR5 2515 SIn montaggio / On show
ATOM 4818 Z 1400 CX5 FANUC Demo rifi latura di termoformatoTrimming of thermoformed parts
ARES 4818 Z 1200 NewPX5 FANUC Demo lavorazione alluminio
(sgrossatura e fi nitura)Aluminium machining
(roughing and fi nishing)
ATHENA 3015 Z 800 CX5 OSAISimulazione / Dry-run
ATHENA 2015 Z 800 TR CX5 OSAI Simulazione / Dry-run
InvitoInvitation Zogno, 28-30.09.2016
ATHENA 3015 Z 800 CX5 OSAI
Via A. Locatelli, 123 - 24019 Zogno (Bg) - ItalyTel. +39.0345.64278 - Fax +39.0345.64280 [email protected] • www.cmsindustries.it