Date post: | 29-Dec-2015 |
Category: |
Documents |
Upload: | kelley-barnett |
View: | 249 times |
Download: | 6 times |
I/O Box
2013/11/28
www.nuuo.com
Agenda
SCB-A08 Key Feature
SCB-A08 Spec
SCB-A08 Part Number
SCB-A08 Server Support Schedule
SCB-A08 Material on Website
SCB-A08 Install Process
www.nuuo.com
SCB-A08 Key Feature
8 inputs (dry contact or wet contact) and 8 relay outputs provided.
Supports 10/100 Mbps Ethernet.
Status LED for each channels.
DIN rail (optional).
Supports LAN and WAN communications.
In server mode supports individual 8 client sessions (socket).
Management access password protected.
Supports socket connection, TCP server, TCP client and UDP.
Heart beat connection ensures reliable TCP connection against power failure or network disruption.
Hardware watchdog (1.34 sec)
www.nuuo.com
SCB-A08 SpecModel SCB-A08
OS (32/64 bit) Windows XP/ Vista/ 7/ 8/ Server 2008/ Server 2012
Input 8
Input Signal Dry Contact or Wet Contact (-30~ -3, 3~30VDC)
Relay Output 8
DC In 12-30 V
Power Consumption 500 mA
Baud Rate Serial port1:9600, Serial port2:115200
Data Bits 5, 6, 7 or 8
Stop Bits 1, 1.5 or 2
Parity none, even, odd, mark, space Operating Temperature 0 to 70 °C (32 to 158 °F)Operation Humidity 0 – 90% (Non-Condensing)
Dimension (W x H x D) 114mm*143mm*28mm (4.5 in*5.6in*1.1in)
Weight 300g
Certifications CE, FCC
www.nuuo.com
SCB-A08 Part Number
SN Item
4-88-450A082000 SCB-A08-EU (US adapter + EU plug adapter)
4-88-450A085000 SCB-A08-US (US adapter)
SCB-A08 Server Support Schedule
Mainconsole V5.0
www.nuuo.com
2014Q1 2014Q2 2014Q3 2014Q42013Q4
NVRmini 2 V2,0NVRsolo V2.0
*Server schedule is TBC . Please consult with each server PM** Titan will not support SCB-A08
Crystal V2,1
www.nuuo.com
SCB-A08 Install Process (1/9)
Step 1: download search tool from www.nuuo.com (Downloads Products-Technical Documentations Accessories) for SCB-A08 and install
www.nuuo.com
SCB-A08 Install Process (2/9)
Step 2: launch search tool and find out SCB-A08 (default IP: 192.168.2.1, select port 4001 for I/O)
www.nuuo.com
SCB-A08 Install Process (3/9)
Step 3-1: Modify IP, double click SCB-A08, modify IP address and press update. FW: 1.8.33 &100613 and NUUO serial number: 00815
www.nuuo.com
SCB-A08 Install Process (4/9)
Step 3-2: also you can go to Web to modify the IP address
www.nuuo.com
SCB-A08 Install Process (5/9)
Step 4: Launch Mainconsole and go to Setting—System Setting
www.nuuo.com
SCB-A08 Install Process (6/9)
Step 5: Click I/O device tab and add new I/O device
www.nuuo.com
SCB-A08 Install Process (7/9)
Step 6: Insert I/O device model name, IP address, port (4001)
Default ID: Addr:01 (connect first device)
www.nuuo.com
SCB-A08 Install Process (8/9)
Step 7: Test I/O device and you can add I/O device
www.nuuo.com
SCB-A08 Install Process (9/9)
Step 8: A08 show on Mainconsole and can test input/output
© 2013 NUUO Inc. All rights reserved. THIS DOCUMENT IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY AND IS NOT INTENDED AS ADVERTISING. ALL WARRANTIES RELATING TO THE INFORMATION IN THIS DOCUMENT, EITHER EXPRESS OR IMPLIED, ARE DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW. THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. ALL MENTIONED BRAND NAMES ARE REGISTERED TRADEMARKS AND PROPERTY OF THEIR OWNERS.