Ion Mobility Spectrometry
Photo Ionization Detector
Gas Chromatography MPS
Introduction
Our MPS is designed for subsequently continuous monitoring of
multiple measuring points. It’s desig-ned to work as an integral
part of a measuring sys-tem.
It is used for online measurements. The sample pump, valves and
sample lines are at ambient tem-perature. It is an ideal tool to
measure components in ambient conditions from several measuring
points.
The design is based on blocks of 4 measurement channels each.
You can combine this by up to 16 points per device.
It is available in a wall mounted stainless steel case or 19"
rack system which includes all valves, a flow meter and two
pumps.
The function of the MPS is fully automatic and con-trolled by
the internal software.
Features
- Long-term-stability and reliability
- Solid-state electronics and few moving parts
- Low Maintenance Time - High Up Time
- Different enclosures possible
Ion Mobility Spectrometry
Photo Ionization Detector
Gas Chromatography Specifications
Description Multipoint Sampling System for Gas analyzers Sample
Points chooseable between 4,8, 12 and 16 points per
deviceSolid-state electronics and few moving parts
Operating ambient Temperature
OutputMaintenance Rate
19" Housing: 15 °C - 30 °C (+59 °F - 86 °F)NEMA 4X Housing: -40
°C - 50 °C (-40 °F - 122 °F)
Integrated graph. display, 1 RS 232, LAN/W-LAN (optional),
Digital I/O1x yearly service
Dimensions
Weight
19" Housing: 483 (W) x 138 (H) x 420 mm (D) (19.1 x 5.4 x 16.5
inch)NEMA 4X Housing: 500 (W) x 500 (H) x 210 mm (D) (19.7 x 19.7 x
8.3 inch)
19" Housing: 10 kg (22,1 lbs)NEMA 4X Housing: 18 kg (39,7
lbs)
Power supplyAvg. power consump.Peak power consump.
230 (115) VAC; 3 (5) A; 50 (60) Hz19" Housing: 12 W NEMA 4X
Housing: 12 W19" Housing: 50 W NEMA 4X Housing: 50 W
MPS
Operating Specification
Analyzer Physical Specification
Utility Requirements
IUT Technologies GmbHVolmerstrasse 7 BD-12489
BerlinGermanyphone: +49 (0)30 20 14 33 00 0fax: +49 (0)30 20 14 33
00 9e-mail: [email protected]
Seite1Seite2
