2
Model 6210 Staticmaster ® Ionizing Air Blowers (Model 6200 HOB and 6210) NOTICE: NRD warrants that these materials are reasonably fit for the purpose described. We believe that specifications and technical information presented are based on test methods that produce accurate results. The foregoing limited warranty is expressly made in lieu of, and no other express and no implied warranty of merchantability or fitness for a particular purpose is made. NRD, LLC will not be liable for incidental, consequential, special, exemplary or punitive damages. The limited warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, error or failure to properly maintain, clean or repair products. 2937 Alt Boulevard, PO Box 310, Grand Island, NY 14072-0310 Toll Free: 800 . 525 . 8076 I P: 716 . 773 . 7634 I F: 716 . 773 . 7744 [email protected] www.NRDStaticControl.com 6200-4/14 The model 6200 HOB Ionizing Air Blower provides a wide-area, high-output stream of ionized air to neutralize static. Features include variable speed fan control, visual in-use indicator, quick-change filter elements and dual squirrel-cage blower motors. It’s designed for bench top or overhead applications. Optional Model 6300 Floor Stand is available for added positioning flexibility. The model 6210 Sentinel Benchtop Ionizing Blower is designed to be compact and lightweight and can be used either setting on a work surface or mounted on a wall or shelf. The dual fan speeds and compact size makes this blower an excellent choice for a wide variety of industrial electronics assembly-based applications. In addition, this unit offers Steady-State DC ionization, low offset voltage, easy clean emitter pins, and automatic balancing of the ionization system. Model 6300 Model 6200 HOB
