Optimization of Turbine Disk
Problem features:
Geometry of Turbine DiskVariable parameters:
Purpose:
To minimize Weight of Turbine Disk
IOSO technology
Stress
Analysis Codes:
Constraints:
ANSYS
Weight of Turbine DiskObjective:
IOSO NM
IOSO technology
Optimization of Turbine Disk
IOSO technology
Optimization of Turbine Disk
IOSO technology
Optimization of Turbine Disk
IOSO technology
IOSO
Optimization of Turbine Disk
IOSO technology
IOSO
Solution
Optimization of Turbine Disk
IOSO technology
ResultWeight
ANSYS & IOSO Technology
Optimization of Turbine Disk
IOSO technology
ResultPar mizes
ANSYS & IOSO Technology
Optimization of Turbine Disk
IOSO technology
ResultSx
ANSYS & IOSO Technology
Optimization of Turbine Disk
IOSO technology
ResultSz
ANSYS & IOSO Technology
Optimization of Turbine Disk
IOSO technology
Distribution of StressInitial OptimizedCurrent
Weight =12,64 кгσ r = 91,48 кг/мм2
σ t = 87,80 кг/мм2
Weight =12,27 кгσ r = 87,97 кг/мм2
σ t = 90,75 кг/мм2
Weight =12,07 кгσ r = 87,77 кг/мм2
σ t = 90,88 кг/мм2
Optimization of Turbine Disk
![Design of Wind Turbines - uniroma1.it. FMEC Wind Turbin… · Ideal wind turbine [1] Real wind turbine design issues An ideal wind turbine can be seen as an actuator disk which captures](https://static.documents.pub/doc/80x56/5f911b418043ba271f7c7ed5/design-of-wind-turbines-fmec-wind-turbin-ideal-wind-turbine-1-real-wind.jpg)
