+ All Categories
Home > Documents > IoT LoRa Solution for Computer Health & Energy ManagementIoT LoRa Solution for Computer Health &...

IoT LoRa Solution for Computer Health & Energy ManagementIoT LoRa Solution for Computer Health &...

Date post: 26-May-2020
Category:
Upload: others
View: 10 times
Download: 0 times
Share this document with a friend
1
All specifications are subject to change without notice. Last update: 14/11/2018 Industrial Automation Features IoT LoRa Solution for Computer Health & Energy Management • Private LoRa based monitoring and control solution for computer health and energy management • LoRa information bulletin board for easy monitoring • Supports wireless long-range network communication • Remote management through AWS cloud platform and mobile App • Ready to use for industrial computers via USB / RS-232 interface • Supercapacitor-based redundant power systrem for industrial computers SCP Cube Redundant Power Sysem Model SCP-41B-LRA / SCP-42B-LRA System Chip High Current Super CAP Backup Controller Supercapacitor Capacity 100 Farads / each Power Power Input DC +12~28V Input Support Output Voltage Backup mode: DC +12V or +24V Output with switch support Normal mode: Vin–0.2 V at 100 % load Output power Max. 60W Power Management Powered device reboot via LoRa remote control Monitoring Real-time health monitoring of powered device I/O Power Input 1 x 3-Pin Terminal Block Power Output 1 x 2-Pin Terminal Block Power Control 1 x Slide Switch USB 1 x Type-A Connector Terminal Block 1 x 8-pin terminal block for external sensor LoRa Standard Private LoRa Frequency 863-870MHz (EU), 902-928MHz (US), 920- 928MHz (ROA) Environmental Operating Temp. -20ºC ~ 70ºC (-4ºF ~ 140°F) Storage Temp. -30ºC ~ 80°C (-22°F ~ 158°F) Operating Humidity 10 ~ 95% RH @ 70°C (non-condensing) Vibration 0.5 Grms/5~500Hz/random operation Shock Operating 10G (11ms), Non-operating 30G Mechanical Mounting Din Rail Mount with bracket Chassis SECC steel chassis Weight 2.2 kg (4.85lb) Dimensions (W x H x D) SCP-41B-LRA=169 x 108(D) X 36(H) mm SCP-42B-LRA=169 X 108(D) X 56(H) mm OS Support Windows 7/10, Linux Kernel 4.x LoRa Gateway Model LN-A3 System CPU Intel ® N2930 Quad-Core™ Processor 1.83GHz Memory 1 x DDR3L SO-DIMM Socket, supporting1600MHz SDRAM up to 8GB, 2GB DDR3L SO-DIMM RAM module installed Storage Device 1 x mSATA for SATA interface SSD Supports 300MB/s HDD transfer rate Power System Power Input DC 12V input with DC jack External I/O USB Ports 1 x Type-A USB 3.0 port, 1 x Type-A USB 2.0 port LAN 2 x RJ-45 GbE ports DVI 1 x DVI-I connector Environmental Operating Temp. -20ºC ~ 55ºC (-4°F ~ 140°F) Storage Temp. -30ºC ~ 70°C (-22°F ~ 158°F) Operating Humidity 10 ~ 95% RH @ 55°C (non-condensing) Mechanical Weight 2.1 kg (4.63 lb) Dimensions (W x H x D) 306 x 206 x 39.50 mm (12.05” x 8.11” x 1.56”) OS Support Yocto (Kernel 3.14.x) LoRa Specifications Standard Private LoRa Frequency 863-870MHz (EU), 902-928MHz (US) 920-928MHz (ROA)
Transcript
Page 1: IoT LoRa Solution for Computer Health & Energy ManagementIoT LoRa Solution for Computer Health & Energy Management • Private LoRa based monitoring and control solution for computer

All specifications are subject to change without notice. Last update: 14/11/2018

Indu

stria

l Aut

omat

ion

Features

IoT LoRa Solution for Computer Health & Energy Management

• PrivateLoRabasedmonitoringandcontrolsolutionforcomputerhealthandenergymanagement

• LoRainformationbulletinboardforeasymonitoring• Supportswirelesslong-rangenetworkcommunication• RemotemanagementthroughAWScloudplatformandmobileApp• ReadytouseforindustrialcomputersviaUSB/RS-232interface• Supercapacitor-basedredundantpowersystremforindustrialcomputers

SCP Cube Redundant Power Sysem Model SCP-41B-LRA / SCP-42B-LRASystemChip High Current Super CAP Backup ControllerSupercapacitorCapacity 100 Farads / eachPowerPower Input DC +12~28V Input Support

Output VoltageBackup mode: DC +12V or +24V Output with switch supportNormal mode: Vin–0.2 V at 100 % load

Output power Max. 60WPower Management Powered device reboot via LoRa remote control Monitoring Real-time health monitoring of powered deviceI/OPower Input 1 x 3-Pin Terminal BlockPower Output 1 x 2-Pin Terminal BlockPower Control 1 x Slide SwitchUSB 1 x Type-A ConnectorTerminal Block 1 x 8-pin terminal block for external sensorLoRa Standard Private LoRa

Frequency 863-870MHz (EU), 902-928MHz (US), 920-928MHz (ROA)

EnvironmentalOperating Temp. -20ºC ~ 70ºC (-4ºF ~ 140°F)Storage Temp. -30ºC ~ 80°C (-22°F ~ 158°F)Operating Humidity 10 ~ 95% RH @ 70°C (non-condensing)Vibration 0.5 Grms/5~500Hz/random operationShock Operating 10G (11ms), Non-operating 30GMechanicalMounting Din Rail Mount with bracketChassis SECC steel chassisWeight 2.2 kg (4.85lb)Dimensions (W x H x D)

SCP-41B-LRA=169 x 108(D) X 36(H) mmSCP-42B-LRA=169 X 108(D) X 56(H) mm

OS SupportWindows 7/10, Linux Kernel 4.x

LoRa GatewayModel LN-A3

SystemCPU Intel® N2930 Quad-Core™ Processor 1.83GHz

Memory1 x DDR3L SO-DIMM Socket, supporting1600MHz SDRAM up to 8GB, 2GB DDR3L SO-DIMM RAM module installed

Storage

Device 1 x mSATA for SATA interface SSDSupports 300MB/s HDD transfer rate

Power SystemPower Input DC 12V input with DC jack

External I/OUSB Ports 1 x Type-A USB 3.0 port, 1 x Type-A USB 2.0 port

LAN 2 x RJ-45 GbE ports

DVI 1 x DVI-I connector

EnvironmentalOperating Temp. -20ºC ~ 55ºC (-4°F ~ 140°F)

Storage Temp. -30ºC ~ 70°C (-22°F ~ 158°F)Operating Humidity 10 ~ 95% RH @ 55°C (non-condensing)

MechanicalWeight 2.1 kg (4.63 lb)Dimensions (W x H x D) 306 x 206 x 39.50 mm (12.05” x 8.11” x 1.56”)

OS SupportYocto (Kernel 3.14.x)

LoRa Specifications

Standard Private LoRa

Frequency863-870MHz (EU),902-928MHz (US)920-928MHz (ROA)

Recommended