IoT Non-Mesh Sensors & Devices · IoT Non-Mesh Sensors & Devices. McWong International, Inc. | 1921...

30 YEARS OF EXCELLENCESince 1985

IoT Non-Mesh Sensors & Devices

McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com

Incorporated in the state of California in 1985, McWong International, Inc. has grown to become a strategic supplier of high-quality l ighting control equipment and related electrical components.

For over 30 years, we have provided to our customers an unparalleled mix of innovation, quality, and service. Today, the pace of technological change has quickened and competition continues to intensify. We are meeting these challenges through heightened investment in capable individuals, promising technologies, and advanced manufacturing facilities.

2


Table of Contents

Product Listings

Fixture-Mount Sensors and Sensor/Controllers …………………………………………6

PIR ……………………………………………………………………………………………………………8

Microwave …………………………………………………………………………………………… 13

Ultrasonic ……………………………………………………………………………………………… 18

Ceiling Mount Occupancy Sensors …………………………………………………………… 19

PIR ………………………………………………………………………………………………………… 20

Dual Tech (PIR/Ultrasonic) …………………………………………………………………… 20

Wall Switch Occupancy Sensors ……………………………………………………………… 22

PIR ………………………………………………………………………………………………………… 23

Dual Tech (PIR/Ultrasonic) …………………………………………………………………… 23

Power Packs ……………………………………………………………………………………………… 24

Photocontrols …………………………………………………………………………………………… 28

Additional Resources

Limited Warranty ………………………………………………………………………………………… 33

Visit our website www.mcwonginc.com to learn more about how McWong’s Sensors & Controls can benefit your company.

3


Product # Description TechInput Voltage

DimMount-ing

Max. Detection

Max Mount-ing Height

Indoor/Outdoor Rated

Applications

PSC-BL-I-FM-DC0(-BLE)*Bi-level PIR Occupancy Sensor (optional Bluetooth Enabled)*

P 12-24VDC Y FM, CM 40ft radius 40ftIndoor/Outdoor**

OC, WH, PG, AP

PSC-BL-I-FM-DC0(-BLE)*-S Bi-level PIR Occupancy Sensor Wet Location Side Mount (optional Bluetooth Enabled)*

P 12-24VDC Y FM, CM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-BL-I-FM-DC0(-BLE)*-BBi-level PIR Occupancy Sensor Wet Location Bottom Mount (op-tional Bluetooth Enabled)*

P 12-24VDC Y FM, CM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-BL-I-RD-DC0(-BLE)*Bi-level PIR Remote Mount Occu-pancy sensor Daylight Harvesting (optional Bluetooth Enabled)*

P 12-24VDC Y FM, CM 10Ft radius 8ft Indoor OC, SP

PSC-BL-I-RT-DC0(-BLE)*Bi-level PIR Remote Mount Occu-pancy sensor (optional Bluetooth Enabled)*

P 12-24VDC Y FM, CM 10Ft radius 10ft Indoor OC, SP

PSC-BL-I-FM-110(-BLE)*Bi-Level PIR Occupancy Sensor w/Load Switch (optional Bluetooth Enabled)*

P 120-277VAC Y FM 40ft radius 40ft Indoor OC, WH, PG

PSC-HB-I-FM-700 Standard PIR sensor (no photocell) P 120-277VAC FM 40ft radius 40ft Indoor OC, WH, PG

PSC-HB-I-FM-710 Standard PIR sensor w/ photocell P 120-277VAC FM 40ft radius 40ft Indoor OC, WH, PG

PSC-HB-I-FM-100WWet location PIR sensor (no photocell)

P 120-277VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-HB-I-FM-110W Wet location PIR sensor w/ photocell P 120-277VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-HB-I-FM-200 347/480V PIR sensor (no photocell) P 347/180VAC FM 40ft radius 40ft Indoor OC, WH, PG

PSC-HB-I-FM-210 347/480V PIR sensor w/ photocell P 347/180VAC FM 40ft radius 40ft Indoor OC, WH, PG

PSC-HB-I-FM-200WWet location 347/480V PIR sen-sor (no photocell)

P 347/180VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-HB-I-FM-210WWet location 347/480V PIR sen-sor w/ photocell

P 347/180VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP

PSC-BL-M-FM-DC0(-BLE)*Bi-level Microwave Occupancy Sen-sor (optional Bluetooth Enabled)*

M 12-24VDC YFM, CM, WM

36ft x 92ft 30ft Outdoor OC, WH, AP

PSC-BL-M-FC-DC0(-BLE)*Bi-level Microwave Occupancy Sen-sor (optional Bluetooth Enabled)*

M 12-24VDC YFM, CM, WM

36ft x 92ft 30ft Indoor OC, WH, AP

PSC-BL-M-RT-DC0(-BLE)*Bi-level Microwave Remote Mount Occupancy sensor (optional Blue-tooth Enabled)*

M 12-24VDC Y FM, CM, WM

16ft radius 10ft Indoor OC, PG, BD

PSC-ID-M-FM-600 Microwave Occupancy sensor M 120-277VAC FM, CM 16ft radius 10ft Indoor OC

PSC-ID-M-FM-500 Microwave Occupancy sensor M 120-277VAC FM, CM 26ft radius 10ft Indoor OC, WH

PSC-BL-U-FM-DC0(-BLE)*Bi-level Ultrasonic Occupancy Sen-sor (optional Bluetooth Enabled)*

U 12-24VDC Y FM, CM 32ft x 32ft 10ft Indoor SP, LR, HS

Sensors & Sensor/Controllers (Dim.)

* PacWave non-mesh Bluetooth only, please refer to McWong IoT Mesh catalog for Bluetooth-Mesh options. **PSC-BL-I-FM-DCO is outdoor use at the Sensor Collar part only. Side and Bottom Mount IP65 enclosure available for completely outdoor sensor option.

Small / Partitioned Office SP

Open Office / Conference Room OC

Lavatory / Rest Room LR

Hallways / Stairwell HS

Warehouse WH

Area/Site Lighting / Parking Lot AP

Parking Garage PG

Bollard BD

PIR P

Ultrasonic U

Microwave M

Dual Technology (PIR & Ultrasonic) D

Fixture Mount FM

Ceiling CM

Wall Mount WM

4


Product # Description TechInput Voltage

DimMount-ing

Max. Detection

Max Mount-ing Height

Indoor/Outdoor Rated

Applications

PSC-ID-I-CM-101Line Voltage Ceiling Mount PIR Occupancy Sensor

P 120-277VAC CM 22ft radius 8ft Indoor OC

PSC-ID-I-CM-301Low Voltage Ceiling Mount PIR Occupancy Sensor

P 24VDC CM 22ft radius 8ft Indoor OC

PSC-ID-D-CM-101Line Voltage Ceiling Mount Dual Tech Occupancy Sensor

D 120-277VAC CM 22ft radius 8ft Indoor SP, OC, LR

PSC-ID-D-CM-301Low Voltage Ceiling Mount Dual Tech Occupancy Sensor

D 24VDC CM 22ft radius 8ft Indoor SP, OC, LR

PSC-ID-I-WS-100 Wall switch PIR occupancy sensor P 120VAC WM 30ft 4ft Indoor SP, LR

PSC-ID-I-WS-101 Wall switch PIR occupancy sensor (no neutral)

P 120VAC WM 30ft 4ft Indoor SP, LR

PSC-ID-I-WS-110Wall switch PIR occupancy/vacan-cy sensor

P 120VAC WM 40ft 4ft Indoor SP, LR

PSC-ID-I-WS-120Wall switch PIR occupancy/vacan-cy sensor

P 120/277VAC WM 40ft 4ft Indoor SP, LR

PSC-ID-I-WS-130Wall switch PIR occupancy/vacan-cy sensor (no neutral)


PSC-ID-I-WS-130DWall switch dual relay PIR occupancy/vacancy sensor (no neutral)


PSC-ID-D-WS-120Wall switch dual technology occu-pancy/vacancy sensor

D 120/277VAC WMP: 40ftU: 20ft

4ft Indoor SP, LR

Sensors

Photocontrol

Small / Partitioned Room SP

Open Office / Conference Room OC

Lavatory / Rest Room LR

Hallways / Stairwell HS

Warehouse WH

Area/Site Lighting / Parking Lot AP

Parking Garage PG

Bollard BD

PIR P

Ultrasonic U

Microwave M

Dual Technology (PIR & Ultrasonic) D

Fixture Mount FM

Ceiling CM

Wall Mount WM

Street Lighting ST

Area/Site Lighting AL

Landscape Lighting LL

Threaded Mount TM

Twistlock TL

Flush Mount UM

Product # DescriptionInput Voltage

MOV Mounting Indoor/Outdoor Rated Applications

PSC-OS-101 Photocontrol Switch Threaded Mount 120VAC NA TM Outdoor LL

PSC-OS-201 Photocontrol Switch Twistlock 120-277VAC 546J TL Outdoor ST

PSC-OS-202 Photocontrol Switch Twistlock 347VAC 546J TL Outdoor ST

PSC-OS-203 Photocontrol Switch Twistlock 480VAC 546J TL Outdoor ST

PSC-OS-301 Photocontrol Switch Flush Mount 120-277VAC NA UM Outdoor AL

5


McWong’s offering of traditional sensors and non-mesh Bluetooth-enabled sensor/controllers features economical, robust control capabilities for a wide range of indoor and outdoor applications. This family of occupancy and motion sensors includes a range of detection technologies—passive infrared, ultrasonic and microwave—as well as numerous form factors for both typical and more challenging applications. Traditional fixture-mount sensors are available in a multitude of choices. Customers can also select fixture-embedded models or remote-mount models for environments where conventional mounting might be difficult. Alternatively, wall switch sensors provide convenience in applications such as small offices, executive washrooms and storage rooms. Both low voltage and line voltage models are offered for additional installation flexibility. A broad selection of sensors within

Fixture-Mount Sensors and Sensor/Controllers

PIR Microwave Ultrasonic

E341446

this family are multi-function sensor/controllers, featuring 0-10V dimming for compliance with energy code bi-level dimming requirements and other performance / energy efficiency strategies, including lumen maintenance, high-end trimming and task tuning.

For applications where Bluetooth® beacons are desired, such as indoor positioning or navigation, RTLS (real-time location services), asset tracking, among others, McWong’s team can ‘beaconize’ any of the dimming sensors within this family, further extending the multi-functionality: enabling beacon advertising, occupancy sensing and dimming control in a single SKU. Warehouse or retail operations are ideal for these sensors as are commercial office buildings, airports, train stations, industrial facilities or shopping malls.6


BLE/C

Additonal Options:[Blank] = No option (for BL only)

S = Side Mount (for BL only)

B = Bottom Mount (for BL only)

/C = Quick Connectors (for BL only)

M = Side/Bottom Mount Kit (for BL only)

A = Mounting Arm IP20 (for HB only)

Bluetooth Options:[Blank] = No wireless control

BLE* = Bluetooth Enabled*

Input Voltage:DC0 = 12-24VDC Vin (for BL only)

0-10VDC Dimming (for BL only)

1XX = 120-277 VAC

2XX = 347-480 VAC

X00 = No photocell

X10 = with photocell

Mounting Method:FM = Fixture Mount

FC = Compact Fixture mount

RT = Remote Head mounting option

(only on PIR and Microwave)

Sensor Technology:I = Passive Infrared (PIR)

M = Microwave

U = Ultrasonic

Application: BL = Bi-level dimming

HB = HighBay

ID = Indoor

Product Series: PSC = Sensors & controls

PSC - BL - I - FM - DC0 - BLE - S/C

How to Order

* PacWave non-mesh Bluetooth only, please refer to McWong IoT Mesh Catalog for Bluetooth-Mesh Options.

7


2.91

in

2.91 in

Ø2.

40 in

2.75 in

*Trimpot #1 on left adjusts time delay. Trimpot #2 in the middle adjusts ambient light sensitivity. Trimpot #3 on right adjusts motion detection range and sensitivity. Turn clockwise to increase, turn counterclockwise to decrease.

Dipswitch 1 Dipswitch 2 DIM LevelOFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%

IP65*

*Option for Bottom/Side mount IP65 Housing

Overview

Sensor Type Quad element PIR

Input 12-24VDC/ 25mA sensor (50mA w/BLE)

0-10V Dimming 100mA (multiple drivers)

Relay Control Vin-2.5V 100mA source

Max Detection Area 12m mounting/24m Diameter

Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min

/45 min, 30 min/60 min, 10 min/∞

Photocell Enable / disable

Operating -30°C to 70°C

Storage Temperature -40°C to 80°C

Relative Humidity 90-95% non-condensing

PIR Dimming Occupancy Sensor

Wiring

How to order

Dimensions

Settings Adjustment

Specifications: PSC-BL-I-FM-DC0 (High Bay/Low Bay)

Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.

12-24V Power SourceSen

sor

YLW

GRY

PRP

0-10V Driver Dimming Wires

WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

DHousing Lens Cover

1.37

in

⌀ø2.

40 in

0.83

in

0.73

in

1.41

in

2.18 in1.12 in

Model No. DescriptionInputVoltage

Output IP Rating

PSC-BL-I-FM-DC0(-BLE) ** Bi-level PIR Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control

IP20/IP65

8



Wiring

Dimensions

Specifications: PSC-BL-I-RT-DC0 (Remote Mount)



sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D

Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level

OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%

Trimpot #1 on left adjusts time delay.Trimpot #2 in middle adjusts ambient light sensitivity.Trimpot #3 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.

Overview


Input 12-24VDC/ 25mA Sensor (50 mA W/ BLE)



Max Detection Area 3m mounting/6m Diameter


/45 min, 30 min/60 min, 10 min/∞

Photocell Enable /disable

Operating Temperature -30°C to 70°C



Color White

Trimpot #1: Time Delay

Trimpot #2: Ambient Light

Trimpot #3: Motion Detection Range

Dipswitches: Dimming Level

How to order


Output IP Rating

PSC-BL-I-RT-DC0(-BLE) Bi-level PIR Remote Mount Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control

IP20

0.73

in

1.08 in

6 in

1.37

in2.18 in

9



Wiring

Dimensions

Specifications: PSC-BL-I-RD-DC0 (Remote Mount - Daylight Harvesting)



sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D



Trimpot #1 on left adjusts time delay.Trimpot #2 in middle adjusts ambient light sensitivity.Trimpot #3 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.

Overview


Input 12-24VDC/ 25mA Sensor (50 mA W/ BLE)



Max Detection Area 2.4m mounting/4.8m Diameter


/45 min, 30 min/60 min, 10 min/∞

Photocell Enable /disable*

Operating Temperature -30°C to 70°C



Color White


Trimpot #2: Ambient Light



0.73

in

1.08 in

6 in

1.37

in2.18 in

* Daylight Harvesting with BLE only

How to order


Output IP Rating

PSC-BL-I-RD-DC0(-BLE)Bi-level PIR Remote Mount Occupancy Sensor Daglight harvesting (optional Bluetooth Enabled)

12-24VDC0-10V, Relay Control

IP20

10


W iring D ia-gram s


Wiring

Dimensions

Specifications: PSC-BL-I-FM-110 (High Bay/Low Bay)

Overview

Sensor Type PIR occupancy sensor

Input 120-277VAC

Max Load 800 VA @ 120VAC, 6.7A

1200 VA @ 208/240/277, 4.3A

0-10V Dimming 100 mA (multiple drivers)

Max Detection Area 12m mounting / 24m diameter

Time Delays (TD1/TD2) 5 sec/10 sec, 2min/15min, 5 min/30 min,

10min/60min, 15 min/45 min, 30 min/

60 min, 10 min/∞, 20min/∞

Photocell Enable / disable

Operating Temperature -20° C to 60°C

Storage Temperature -40° C to 80°C

Relative Humidity 90-95% non-condensing at 30°C

Color White

How to order


Output/Max Load IP Rating

PSC-BL-I-FM-110(-BLE)Bi-Level PIR Occupancy Sensor w/Load Switch(add “-BLE” suffix for Bluetooth Enabled version)

100-277VAC0-10VDC(Dimming) 800VA @ 120VAC, 6.7A1200VA @ 208/240/277VAC, 4.3A

IP20

4.13

in

4.13 in1.73 in

0.50 in

Settings AdjustmentSensitivity Delay Time Dimming

1 2 3 4 5 6 7 8

↓ ↓ 100% ↓ ↓ ↓ 5sec/10sec ↓ ↓ OFF ↓ PIR sensor only

↓ ↑ 90% ↓ ↓ ↑ 2min/15min ↓ ↑ 10% ↑ Photocell + Sensor

↑ ↓ 80% ↓ ↑ ↓ 5min/30min ↑ ↓ 25%

↑ ↑ 70% ↓ ↑ ↑ 10min/60min ↑ ↑ 50%

↑ ↓ ↓ 15min/45min

↑ ↓ ↑ 30min/60min

↑ ↑ ↓ 10min/∞

↑ ↑ ↑ 20min/∞

LINE

NEUTRAL

L N

DIM+ DIM-

11

1.73 in

IP20

IP65

* PSC-HB-I-FM-700/710 does not have Back Mounting option**Sensors with “W” for wet location does ont have Mounting Arm and Back Mounting Options

Model No. DescriptionInput Voltage(VAC)

Output / Max Load IP Rating

PSC-HB-I-FM-700* Standard PIR sensor (no photocell) 120-277800VA @ 120VAC, 6.7A1200VA @ 208/240/277VAC, 4.3A

IP20

PSC-HB-I-FM-710* Standard PIR sensor with photocell 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A

IP20

PSC-HB-I-FM-100W Wet location PIR sensor (no photocell) 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A

IP65

PSC-HB-l-FM-110W Wet location PIR sensor with photocell 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A

IP65

PSC-HB-l-FM-200 347/480V PIR sensor (no photocell) 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A

IP20

PSC-HB-l-FM-210 347/480V PIR sensor with photocell 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A

IP20

PSC-HB-I-FM-200W Wet location 347/480V PIR sensor (no photocell) 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A

IP65

PSC-HB-I-FM-210W Wet location 347/480V PIR sensor with photocell 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A

IP65

How to order

PIR High Bay Occupancy Sensor


12


2.91

in2.

61 in

1.67

in

2.20

inG1/

2 in

0.41 in2.06

in

1.67

in

2.91 in

G1/2

0.83

in

0.12

in

Overview

Sensor Type Microwave 10.525 GHz

Input 12-24VDC/ 60mA Sensor( 85mA w/ BLE)



Max Detection Area 9m mounting/11m x 28m


/45 min, 30 min/60 min, 10 min/∞

Photocell N/A

Operang Temperature -30° C to 70°C


Relave Humidity 90-95% non-condensing

Color White

Microwave Dimming Occupancy Sensor

Specifications: PSC-BL-M-FM-DC0

Wiring


sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D



Trimpot #1 on left adjusts time delay.Trimpot #2 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.

How to order


Output IP Rating

PSC-BL-M-FM-DC0(-BLE) Bi-level Microwave Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control

IP65

Dimensions


Time Delay

Motion Detection Range

13


Physical Dimensions

Note : Mount sensor withwires to the righ t of the trimpots/dipswitch for best performance. Length of detection pattern (i.e. 24, 26, 30m) is in line with the sensor face that has the trimpots/dipswitch.

All units shown are in meters.




(Microwave - compact form factor)

Dimming Occupancy Sensor

Specifications: PSC-BL-M-FC-DC0

2.32in

1.03

in2.

32in

1.03inOverview


Input 12-24VDC/ 60mA sensor (85mA w/BLE)


Relay control Vin-2.5V 100mA source



/45 min, 30 min/60 min, 10 min/∞

Photocell N/A

Operang Temperature -30° C to 70°C


Relave Humidity 90-95% non-condensing

Color White

Wiring



sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D




Dimensions

How to order


Output IP Rating

PSC-BL-M-FC-DC0(-BLE) Bi-level Microwave Occupancy Sensor 12-24VDC0-10V, Relay Control

IP20


Specifications: PSC-BL-M-FM-DC0

14


Physical Dimensions

Note : Mount sensor withwires to the righ t of the trimpots/dipswitch for best performance. Length of detection pattern (i.e. 24, 26, 30m) is in line with the sensor face that has the trimpots/dipswitch.

All units shown are in meters.




(Microwave - compact form factor)

Dimming Occupancy Sensor

Specifications: PSC-BL-M-FC-DC0

2.32in

1.03

in2.

32in

1.03in



sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D


Specifications: PSC-BL-M-RT-DC0 (Remote Mount)

Overview


Input 12-24VDC/ 60mA Sensor (85mA w/BLE)



Max Detection Area 3m mounting/10m diameter


/45 min, 30 min/60 min, 10 min/∞

Photocell Default off*




Color White

Dimensions

1.38 in 1.23 in

1.36

in

19.4

9 in

2.28 in 1.02 in

1.54 in

Settings Adjustment

Dipswitch 1 Dipswitch 2 DIM LevelOFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%


Wiring




* Photocell can be activated through optional BLE version only

How to order


Output IP Rating

PSC-BL-M-RT-DCO(-BLE) Bi-level Microwave Remote Mount Occupancg Sensor 12-24VDC0-10V, Relay Control

IP20

15


Microwave Occupancy Sensor

Specifications: PSC-ID-M-FM-600

Overview


Input Voltage 120-277VAC, 50/60Hz

Max Load (Tungsten) 1200VA @ 120VAC, 10A

Max Load (Ballast) 600VA @ 120VAC, 5A

600VA @ 277VAC, 2.2A

Max Detetion Area 3m mounting/10m diameter

Time Delay 5 sec to 30 min

Operating Temperature -20° to 45°C

Storage Temperature -20° to 45°C


Color White

Dimensions

Wiring

SENSOR

LO AD

N e utral (White )

H ot (B lack)

(R e d)

Settings AdjustmentMicrowave Sensor Dipswitches

Time Delay: Sensor Range: Photocell:

1 2 3 4 5 6

↓ ↓ ↓ 5 sec (test) ↓ ↓ 5 m ↓ OFF

↓ ↓ ↑ 30 sec ↓ ↑ 4 m ↑ ON

↓ ↑ ↓ 1 min ↑ ↓ 3 m

↓ ↑ ↑ 3 min ↑ ↑ 2 m

↑ ↓ ↓ 5 min

↑ ↓ ↑ 10 min

↑ ↑ ↓ 20 min

↑ ↑ ↑ 30 min

How to order


Max Load IP Rating

PSC-ID-M-FM-600 5.8 GHz Microwave Occupancy Sensor120-277VAC, 50/60Hz

600VA @120VAC Tungsten600VA @120VAC Ballast 600VA @277VAC Ballast

IP20

0.5 in1.16 in

1.16 in1.2 in

1.73 in1.75 in

3.3 in

2.31in

2.31in

16


Dimensions

↓ ↓ ↓ ↓ ↓ ↓↑ ↓ ↑ ↓ ↓ ↑

↑ ↓ ↓ ↑ ↓↑ ↑ ↓ ↑ ↑

↑ ↓ ↓↑ ↓ ↑↑ ↑ ↓↑ ↑ ↑

0m

2

2

4

4

6

6 8

8

10

100m 1 2 3 4 5 6 7 88 7 6 5 4 3 2 1 9 10 11 1212 11 10 9

9

8

7

6

5

4

3

2

1

Overview



Max Load (Tungsten) 800VA @ 120VAC, 6.7A

Max Load (Ballast) 400VA @ 120VAC, 3.4A

600VA @ 277VAC, 2.2A

Max Detection Area 4m mounting/16m diameter


Photocell Sensitivity 20-200 Lux




Mounting Fixture mount

Color White

How to order


Max Load IP Rating

PSC-ID-M-FM-500 5.8 GHz Microwave Occupancy Sensor120-277VAC, 50/60Hz

800VA @120VAC,6.7A Tungsten400VA @120VAC,3.4A Ballast 600VA @277VAC,2.2A Ballast

IP20

Microwave Occupancy Sensor

Specifications: PSC-ID-M-FM-500

17


OverviewSensor Type Ultrasonic 40KHz ± 1kHz.

Input 12-24VDC/45mA sensor (70 mA w/BLE)

0-1OV Dimming 100mA (multiple drivers)



Time Delays (TD1) 1 min, 5 min, 20 min*

Photocell Default off*


Storage Temperature -40° Cto 80°C


Color White

1.27

in0.

91 in

0.81

in0.

79 in

6.11 in5.72 in3.61 in

Dimensions

Case length without foot bracket: 5.17 in



Trimpot #1 on left adjusts motion detection range and sensitivity.Trimpot #2 on right adjusts time delay.Turn clockwise to increase, turn counterclockwise to decrease.

* Time Delays (TD2) and Photocell can be activated through optional BLE version only

Test Button

Model No. Description Input Voltage Output IP Rating

PSC-BL-U-FM-DC0(-BLE) Bi-level Ultrasonic Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control

IP20

Ultrasonic Dimming Occupancy Sensor

Specifications: PSC-BL-U-FM-DC0

Wiring


How to Order

⁰⌀


sor

YLW

GRY

PRP


WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D

18


⁰⌀

Ceiling Mount Occupancy Sensors

19

D

D

Sensor Type PIR / Ultrasonic

Input Voltage 120-277VAC or 24VDC

Max Load (Resistive) 800W @ 120VAC, 60Hz

Max Load (Fluorescent) 800VA @ 120VAC, 1600VA @ 277VAC

Max Load (Motor) 1/4 hp @ 120VAC, 60Hz

PIR Sensor Range Dia. / ² / 360° coverage 13m 140m

Ultrasonic Sensor Range x / ² 9m 9m 80m


Photocell Sensitivity 10-150 fc (107-1615 lux)



Relative Humidity 95% non-condensing

Mounting Ceiling mount (8-10ft)

Color White

E350121

2.5m

6.5m 4m 2m 1m 0 1m 2m 4m 6.5m

9m x 9m

13m


20


Sensor Type PIR / Ultrasonic

Input Voltage 120-277VAC or 24VDC

Max Load (Resistive) 800W @ 120VAC, 60Hz

Max Load (Fluorescent) 800VA @ 120VAC, 1600VA @ 277VAC

Max Load (Motor) 1/4 hp @ 120VAC, 60Hz

PIR Sensor Range Dia. / ² / 360° coverage 13m 140m

Ultrasonic Sensor Range x / ² 9m 9m 80m


Photocell Sensitivity 10-150 fc (107-1615 lux)




Mounting Ceiling mount (8-10ft)

Color White

E350121

2.5m

6.5m 4m 2m 1m 0 1m 2m 4m 6.5m

9m x 9m

13m

Dimensions

1.38 in

0.68 in Dia 4.52 in

3.62 in

21


Wall Switch Occupancy Sensors

22

Model No. Description Min Load Max Load †

Input Voltage (VAC)

PSC-ID-I-WS-100* Wall switch PIR occupancy sensor 25W 500VA 1/8 Hp motor 120

PSC-ID-I-WS-101* ** Wall switch PIR occupancy sensor (no neutral) 25W 500VA 1/8 Hp motor 120

PSC-ID-I-WS-110 Wall switch PIR occupancy/vacancy sensor None

800VA @ 120VAC 1600VA @ 277VAC

120

1/4 Hp motor @ 120VAC

PSC-ID-I-WS-120 Wall switch dual voltage input PIR occupancy/vacancy sensor None 120/277

PSC-ID-I-WS-130 Wall switch PIR occupancy/vacancy sensor (no neutral) None 120/277

PSC-ID-I-WS-130D Wall switch dual relay PIR occupancy/vacancy sensor (no neutral) None 120/277

PSC-ID-D-WS-120 Wall switch dual technology occupancy/vacancy sensor None 120/277


23

1.88 in

1.62 in

WT: 4.3 oz 2.78 in

0.47 in

Product Type Class 2 output power supply


Output 24VDC, 150mA (w/ relay connected)

Max Load (Ballast) 20A @ 120-277VAC

Max Load (Incandescent) 20A @ 120VAC

Max Load (motor) 1hp @ 120/240VAC

Max No. of Sensors Controls up to 6 sensors in parallel

Operating Temperature 0° to 55°C



Mounting Fixture or J-box mount, 0.5 inch knockout

Color White

Certifications UL 244A Plenum rated

UL 94V-0 case

UL/cUL listed: E341446

1.62 in

1.68 in

0.47 in

2.78 in

How to order


Output

PSC-AC-PP-100 Low Voltage Power Pack 100-277VAC 24VDC

Power Pack

Specifications: PSC-AC-PP-100 (Junction Mount, with Relay)


24


Pow

er P

ack

YLW

BRN

PRP

WHTMot

ion

Low

Mot

ion

Hig

hD

IM

GN

D0-

10V

RED+V

BLKGN

D

Note: If using sensor dimming, cap driver dimming wires, and if using driver dimming, cap sensor dimming wires.

PRP

GRE

RED

BLK Hot

Load

AC H

ot

WHT NeutralAC

Neu

tral

Load

12-24V Output0-10V Sensor Dimming Wires


DIM

G

ND

0-10

V

Power Pack

Specifications: PSC-AC-PP-200 (Fixture Mount Dimming, with Relay)

Overview

Product Type Low Voltage Power Pack

Input Voltage 120-277VAC

Output Voltage 12.4VDC

Max Load 10A load @250V(PSC-AC-PP-200)

N/A(PSC-AC-PP-300)




Mounting Fixture Mount

Color White

Dimensions

5.04 in

4.65 in

4.20 in

0.71

in1.

08 in

1.37

in

Wiring

How to order

Model No. Description Input Voltage Output

PSC-AC-PP-200/C Dimming Power Pack for Fixture Mount with Connector 100-277VAC 12.5VDC

PSC-AC-PP-200* Dimming Power Pack for Fixture Mount 100-277VAC 12.5VDC

25


PSC-AC-PP-700C (Fixture Mount, with Relay)

Power Pack

Overview

Product Type Low Voltage Power Pack


Output Voltage 12VDC, 0~100mA

Max Load 10A @ 250V





Color Black

Wiring

Dimensions

How to order


PSC-AC-PP-700C Low Voltage Power Supply for Fixture Mount w/ Relay 100-277VAC 12VDC

PSC -A C -PP -700C

120-277V (BLACK)

COM (WHITE)

V- (BLACK)

12V+ (RED)

GROUND (GREEN)

LOAD (BLUE) LOAD

MOTION HIGH (YLW)

(GREEN/YELLOW)

(BLUE/RED)

3.6 3“ (92.2 0m m )

1.0 1“ (25.6 0m m )

4.1 8“ (106. 17m m )

2-Ø0.1 7“ (2-Ø4.2m m )

3.1 8“ (80.7m m )

1.0 4“ (26.4m m )

Drawings are Not to Scale

4.18 in

3.63 in

3.18 in

1.01 in

1.04 in

2-Φ0.17 in

26


PSC-AC-PP-400 (Fixture Mount, No Relay)

Power Pack

Overview

Product Type Low Voltage Power Supply

Input 120-277VAC, 50/60Hz

Output 12VDC, 0~250mA

Max Case Temp Tc 90°C




Color White

Wiring

Dimensions

How to order


PSC-AC-PP-400 Low Voltage Power Supply for Fixture Mount 100-277VAC 12VDC

PSC -A C -PP -400

12V+ (RED)

V- (BLACK)

120-277V (BLACK)

COM (WHITE)

2.07 in

1.05 in

0.91 in

2-Ø0.14 in

2.37 in

2.64 in

27


OverviewSensor Type PhotoControl IR Filtered

Input 120VAC

Max Load 1200W Tungsten

1000VA Ballast

Photocell Turn On Level 10~20 Lux

Photocell Turn Off Level 30~60 Lux

Fail Mode On

Time Delay On 30-120 seconds

Time Delay Off 30-120 seconds




IP Rating 54

Enclosure Material Polycarbonate

Color Black

Dimensions

Model No. Description Input Voltage Output/Max Load

PSC-OS-101 Photocontrol Switch Threaded Mount 120 VAC1200W Tungsten 1000VA Ballast

Photocontrol

Specifications: PSC-OS-101 (Threaded Mount)

Wiring

How to Order

3.31 in

1.26

in

1.90

in

0.81 in

28



Input 120-277VAC (PSC-OS-201)

347VAC (PSC-OS-202)

480VAC (PSC-OS-203)


1800VA Ballast

Photocell Turn On Level 16 Lux

Photocell Turn Off Level 24 Lux

Fail Mode On

Time Delay On 0-10 seconds

Time Delay Off 5-20 seconds

Surge Protection 546 Joules




IP Rating 65

Enclosure Material Polypropylene

Color Blue

Dimensions

Photocontrol

Specifications: PSC-OS-2XX (Twistlock)


PSC-OS-201 Photocontrol Switch Twistlock 120-277VAC1000W Tungsten 1800VA Ballast

PSC-OS-202 Photocontrol Switch Twistlock 347VAC1000W Tungsten 1800VA Ballast

PSC-OS-203 Photocontrol Switch Twistlock 480VAC1000W Tungsten 1800VA Ballast

Wiring

How to Order

2.22

in

Dia 3.31in

29


How to Order


Input 120-277VAC


1200VA Ballast @ 120VAC

1800VA Ballast @ 208-277VAC

Photocell Turn On Level 16 Lux

Photocell Turn Off Level 24 Lux

Fail Mode On

Time Delay On 5 seconds

Time Delay Off 5 seconds




IP Rating 65

Enclosure Material Polypropylene

Color Black

Dimensions


PSC-OS-301 Photocontrol Switch Flush Mount 120-277VAC1000W Tungsten 1200VA Ballast @ 120VAC1800VA Ballast @ 208-277VAC

Photocontrol

Specifications: PSC-OS-301 (Flush Mount)

Wiring

2.05 in

0.92

in

1.13 in 0.87 in

30


Photocontrol and AccessoriesMcWong Photocontrol and Accessories series come in voltage ranges from 120-480VAC, that meet or exceed ANSI C136-10. PSC-AC-LJ240 twist-lock photocontrol receptacle were also designed to conform with ANSI C136-41-2013 to allow multi– control of LED lights through the receptacle. This item comes with 4 gold-plated low voltage pads on the top surface to fit photocontrol with ANSI C136.41 conforming spring contacts, and offers 4 corresponding wires at the bottom for signal connection.

PSC-AC-LJ240 comes with 360 degree rotation feature to conform ANSI C136.10-2010 requirements. Simple installation by fitting into a lamp housing with 2 screws. This item is IP65 rated for outdoor.

PSC-AC-LJ208 is a shorting cap intended to short a twist-lock photocontrol receptacle. It comes with easy to maintain twist-lock, UV stabilized polycarbonate cover and IP65 rating.

Specifications: PSC-OS-R10

Specifications: PSC-OS-S20

OverviewInput Voltage 120~480VAC, 50/60 HzMax Power Load 15A max. / AWG#16: 10A max.Signal Load 30VDC, 0.25A max.Ambient Temperature -40°C to 70°C

Leads 12” Power Lead 14AWG;12” Signal Lead 18AWG

Overall Dimensions (mm) 69 Diameter x 38IP Rating IP 65

Standard UL RecognizedANSI C136-10

OverviewInput Voltage 120~480VAC, 50/60 HzMax Power Load 15A max. / AWG#16: 10A max.Ambient Temperature -40°C to 70°C Connection Type 3 Prong Twist LockOverall Dimensions (mm) 74 Diameter x 50IP Rating IP 65

Standards UL ListedANSI C136.10

31

Sensors & Controls

LED Emergency Drivers

Stepdown Transformers

LED Drivers / Modules

Surge Protectors

HID Ballasts/Lamps


32

Photocontrols 24 months

Fixture Mount Occupancy Sensors

Ceiling Mount Occupancy Sensors

Wall Switch Occupancy Sensors

Power Pack

60 months

60 months

60 months

60 months


33

Notes:

34

Notes:

35

Copyright© 2019 McWong International, Inc. Specifications subject to change without noticeV6.00

Date post:	11-Jul-2020
Category:	Documents
Upload:	others
View:	9 times
Download:	0 times

IoT Non-Mesh Sensors & Devices · IoT Non-Mesh Sensors & Devices. McWong International, Inc. | 1921...

Documents