IPC/WHMA-A-620 Revision C
What’s Changed
What’s New
How can you participate?
Presented by
Donnie Hill
President, Precision Mfg. Co., Inc.
WHMA Vice Chairman
What Changed When the final redlined document was completed, 40% of the document had changed between Revision B and Revision C
IPC has a video course called IPC/WHMA-A-620 Redline that details all of the changes
$50.00 – IPC Member
$65.00 – Non-member
What Changed - Synergy A dedicated synergy committee was formed to align the three most used standards in our industry:
IPC/WHMA-A-620
• Requirements and Acceptance for Cable and Wire Harness Assemblies
IPC-A-610
• Acceptability of Electronic Assemblies
J-STD-001
• Requirements for Soldered Electrical and Electronic Assemblies
What Changed - Synergy For this revision, there was a conscious effort to remove unintentional conflicts between the three standards
What Changed – 620 Standard Mirrored Accept & Defect Clauses
Where possible, the committee aligned the Acceptable and Defect clauses
This eliminates any assumption that the lack of defect criteria means the part is acceptable and vice versa
What Changed – 620 Standard More pictures to clearly define all criteria
A dedicated Graphics Team has been created to review pictures and present the best / clearest to the committee for inclusion into the standard
Expanded tables
Many tables were reviewed and refined to convey more information in tabular form
What’s New Section 1 – General
This entire opening section was re-organized to be similar in style and content to Section 1 in the upcoming revisions of IPC-A-610 and J-STD-001
Part of the synergy project
What’s New Section 2 – Applicable Documents
Sections 2.8, 2.9, 2.10, 2.12
Inclusion of applicable documents from additional organizations like IEC, NAS, EIA and IEEE
What’s New Section 4 – Soldered Terminations
New Table 4-1 : Solder Connection Anomalies
• Summary of the various solder anomalies with inspection criteria by Class went from bullet points to tabular form
What’s New Section 5 – Crimped Terminations
New Section 5.1.7 – Stamped and Formed – Open Barrel – Individual Wire Seal
• Criteria for application of an individual wire seal onto a terminated wire (Example Delphi’s Weather Pack Seal)
New Section 5.5 – Shrink Sleeving – Wire Support – Crimped Terminals
• Criteria for placement of heat shrink onto a crimped terminal
What’s New Section 9 – Connectorization
General update & re-organization of Sections 1, 2 & 3 for greater clarity
What’s New Section 17 – Finished Assembly Installation
New Section 17.2.3 Safety Wiring
• Criteria for the installation of safety wire
New Section 17.2.4 Safety Cable
• Criteria for the installation of safety cables
What’s New Section 17 – Finished Assembly Installation
New Section 17.3.6 Raceways
• Criteria for the installation of bundles of wires and cables into raceways
New Section 17.3.7 Grommets
• Criteria for the installation of bundles of wires and cables thru grommets both when sealing is required and not required.
What’s New New Section 20 – High Voltage Applications
This section in only applicable when specified in drawings and/or thru the procurement process
High Voltage is as defined by the customer
Provides unique criteria for high voltage soldered connections
What’s New Appendix A – Terms and Definitions
Added several new definitions
Expanded definition of Electrical Clearance with a table defining distances based on voltage.
What’s New Appendix C – Guidelines for Soldering Tools and Equipment
All new, included as part of synergy project based on a similar section in J-STD-001
Why Participate? In order for the standard to truly represent our industry we need input from wire harness manufacturers who represent all three classes of manufactured products
How to Participate - Adopt Adopt the standard
Support the standard and WHMA’s efforts by adopting the standard for use within your company
Promote using the standard as a neutral third party when interacting with your customers
Become the “expert”, have someone within your organization become certified to the standard
How to Participate - Join Join a committee
There are several committees associated with the 620 standard :
• 7-31f IPC/WHMA-A-620 Task Group
• 7-31fs Space Electronics Assemblies Addendum Task Group
• 7-31ft IPC/WHMA-A-620 Technical Training Task Group (and a European Training Task Group)
• 7-31h IPC/HDBK-620 Handbook Task Group
How to Participate - Join Committee Meetings are typically held twice a year
In San Diego in conjunction with APEX, in February
In Chicago in conjunction with SMTA , in October
This year, there will be a special 3 hour meeting held during the Milwaukee Wire Harness show
How to Participate - Submit Help update the standard
In the back of the standard is a submittal form to suggest additions or changes.
The form can be submitted by mail or email to IPC directly – anyone can submit.
WHMA members can email either Bud Bowen, Co-Chair ([email protected] )
or Cathy Hanlin, Vice-Chair ([email protected]) and they can submit for you.
How to Participate - Submit The committee may contact you for further information
Submission does not necessarily mean that the proposal will be accepted but the committee will look at it, assign someone to further research if needed, discuss the pros and cons of the submittal, and, as a group, vote to accept or reject the submission