Date post: | 05-Dec-2014 |
Category: |
Documents |
Upload: | ahsengineering |
View: | 327 times |
Download: | 0 times |
IPHONE CASE
Max Gundrum
UNDERSTAND For a “Grease Monkey” iPhone 4S case Not too bulky/light weight Attention getting style Easy to take off and put on Holds Credit card/ID card Could hold folded cash Protects charging slot, headphone jack
and camera from dirt, water, paint, and other particles
Nick G.
Works in Automobile industry
EXPLORE
EXPLORE CONTINUED These cases were too soft Didn’t protect the headphone jack Charging slot was open Couldn’t be taken off easily Isn’t “cool” or has unique colors Too bulky Easily attracts dust and particles
Costs too much $$$
IDEATE
IDEATE CONTINUED First design ideas
Those cases would end up being too bulky and too complex
Couldn’t be painted or able to change colorsWeren’t easy to take on and offMaterials and manufacturing costs would be
too highDidn’t fully fit what Nick wanted
PROTOTYPE/ REFINE
SOLUTION My final design ended up being at a cost
of ~$10.00 It covered the headphone jack, charging
port, buttons and camera I choose TPU as a material for the case
Thermoplastic polyurethane has extremely good characteristics for a case (high elasticity, oil and grease resistance, shear strength and abrasion resistance)
It is also very affordable It is made in molds so manufacturing costs
are very low