WELDING MANIPULATOR MODEL WM 3030 FOR SMALL ID
IRIZAR HEAVY INDUSTRIES INC1512 ADAMSON VIEW, EDMONTON ALBERTA T6W 0V4, CANADAPHONE: 1 780 450 6695WEB: WWW.JIRIZAR.COM
WELDING MANIPULATOR MODEL WM 3030 WITH MOTORIZED TROLLEY DESIGNED FOR SMALL INSIDE DIAMETERSLongitudinal Seams: MIN ID 20” (508 mm) Circumferential Seams: MIN ID 40” (1,000 mm)
FEATURES:
1. Boom vertical effective expansion: 3.0 m2. Boom horizontal effective expansion: 3.0 m 3. Boom expansion speed (in-out): From 0.12 up to 1.2 m/min4. Boom lifting speed (up-down): 1.0 m/min5. Boom extremity max load: 200 kilograms @ 12” GC 6. Trolley motorized (approx.): 0.30 to 3 0 m/minute7. Column rotation motorized (approx.): 0.03 to 0.30 RPM 8. Column rotation motorized: ± 180º 9. Column height (approx.): 5.49 m 10. Included on Irizar scope:
a. IDEALARC Lincoln DC 1000, K1387-3. Power: 220/380/440*3/50/60 b. Custom built head wire feeder Lincoln NA-3S, K208A c. Lincoln Controller NA-3S, K210-2 d. Custom built Flux Recovery System Model FRU-80 with heated fixturee. Custom built flux hoperf. Motorized cross slide: 50 kilos @ 12” GC; Stroke 6” x 6”g. Camera, LED light & screen devicek. Wire reel for 60 lbs coil l. Insulation hose for welding wire on Boomm. Welding head 90º rotation. n. Flux hoses special design for feeding/sucking at 90º head rotationo. All brackets included plus threaded holes and bolts for installation on WM. p. Set up diagram. All brackets and wiring cables numbered for easy set up
11. Remote Control Box: a. Cable length: 12 mb. Variable speed on Boom in-out forward/stop/reversec. Potentiometer and digital display in mm/mind. Boom lifting up/stop/downe. Cross slide control up/stop/down & right/stop/left
12. Main Control Box: a. Variable speed on column rotation: forward/stop/reverseb. Variable speed on Trolley: forward/stop/reverse
13. Boom features: • Counter weight system to ensure smooth vertical travel• Cable organizer included
14. Safety: • Boom anti-fall safety device• Trolley anti-fall safety device• Limited switches in all directions
15. Quality: • Gear box’s shells made of cast iron ASTM-A48-A-A48M or equivalent• Shafts made of ANSI 1045 or equivalent• Motors and control box with IP 54 protection against dust and heavy rain• Frequency Driver made by TECO Westinghouse• Stress Relieved on Column and Boom: Ensure the release of tensions after
welding process• Shot blasted: Ensure paint holds longer• Power Source platforms rotate along with the column. Reduce voltage drop
since the power source move with the trolley. Max load capacity of 1.5 MT16. Power: 2.75 kW17. Input Power: 240 V, 60 Hz, 3 P or 380 V, 50 HZ, 3P18. Operation Manual19. Electric Diagram20. One Year Warranty
OPTIONAL:
1. Rail of 6 m length @ 36 kg/m2. Set up at job site: Include two business days plus one day go/return. At buyer
expenses: Air plane ticket, local transportation, food and accommodation expenses
EXCLUSIONS:
1. Power and ground cables from wall to Lincoln Power source / Irizar WM 3030 main control box
2. Any item which is not specifically mentioned
NOTE:
For erection and commissioning the buyer will provide material handling and labour for set up and installation.
WELDING MANIPULATOR FOR SMALL INSIDE DIAMETERS
IRIZAR HEAVY INDUSTRIES INC1512 ADAMSON VIEW, EDMONTON ALBERTA T6W 0V4, CANADAPHONE: 1 780 450 6695WEB: WWW.JIRIZAR.COM