Date post: | 14-Jul-2015 |
Category: |
Technology |
Upload: | india-water-portal |
View: | 69 times |
Download: | 0 times |
SENCO Iron Removal Plant for Hand pump
Description Iron Removal plant for hand pump ismild steel fabricated rugged filter vesselfilled with Iron removal resin. The innerwall of the IRP is given anticorrosiverubber paint. It is fitted with a 3 wayvalve and has inlet and outletconnection as in the photograph.
Working
Water from the hand pump is passed thoughthe inlet of the IRP. The water passes througha bed of Iron removal resin where Iron contentis removed and Iron free water flows out,through the outlet. After a period of time theresin gets saturated and has to be regenerated.This regeneration process is done by justbackwashing and without addition of anychemicals.
Backwashing The three way valve is changed from filter
position to backwash position. Now the hand
pump is pumped and the water flows in to
the IRP but in the opposite direction. Now all
the accumulated Iron in the media will get
washed off and will pass to the drainage.
Once the water coming out of the IRP is clean
then it is understood that all the iron content
is removed. Now the resin is ready for the
next operation. Turn the 3 way valve to filter
position and continue to get iron free water.
The interval between the backwashing will be
dependant on the iron content in water. It is
generally recommended to backwash once
everyday for about 5-10 minutes.
Installation
This IRP can be installed near the existing hand
pump on the hand pump platform and can be
connected with existing hand pumps using GI
pipes an fittings.
Salient Features
Cost effective.
Can utilize the existing bore wells.
Easy to use and maintain.
Can be used in remote settlements.
Compact and very less footprint.
No electricity required.
No chemicals required.
No running cost.
Parameter
Flow rate : 10-15 liters per min Material of construction: Mild steel Backwash Frequency: Site specific,
recommended to backwash daily. Unit Height : 20 inches Unit Diameter : 20 inches Max input contaminate: 10 mg/lit of Iron Output Iron contaminate: less than 0.3mg/lit Total weight (dry) : 64 Kgs