IRWIN - Bernzo mixed gas

IRWIN University Specialist Program

BERNZOMATIC MIXED GAS, BUTANE GAS AND TORCHES


BERNZOMATIC BUTANE/PROPANE MIXED GAS

APPLICATIONDesigned for and best usedfor most DIY heating applicationssuch as: Loosening bolts, thawingpipes, bending plastics, removinglabels, stripping caulk, sweatingpipes and light soft soldering.

PB-330-ETECHNICAL SPECIFICATIONS

330g Cartridge of Mixed Gas containing app. 65% Butane and 35% Propane.

Connection threads similar to other competitor cans and can accept competitor torches.

Plastic cap fitted to prevent damage to valves during shipping.

TÜV approval and certification to European Standard EN 417.

UN 1950.


PB190-EPiercable 190g Mixed Gas cartridge containing app. 65% Butane and 35% Propane.

Designed for one-time use only withBernzomatic product PBLAN.

UN 2037.

BERNZOMATIC BUTANE/PROPANE MIXED GAS

ALTERNATIVE CARTRIDGE SIZES

PB175-E175g Mixed Gas cartridge containing app. 65% Butane and 35% Propane.

Other Technical Specs. asPB330-E.


UL50-E MIXED GAS KIT

PENCIL POINT FLAMEThis flame is ideal for detailed and fine jobs.

FLAME CONTROLFlame control allows you toadjust the flame accordingto the job you want to do.

NONE FLARINGPatented technology preventsthe torch from flaring when usedIn a tilted position.

FRACTURE GROVEMachined in fracture grove to control breakage point and prevent gas leakage if dropped or abused.

HEAT OUTPUT/BURNTIMETotal heat output is .68kW/hour.Burn time on full cartridge is 3.7hours.

BASEDelivered with a plastic base stand,to stabilize the product.


UL50-E MIXED GAS KIT

CAPACITYSoft-soldering capacity withMixed Gas is from Ø 3 – 19mmpipe diameter.

TARGET CUSTOMERThe kit is aimed at less frequentusers looking for a low price pointsolution.

VALVE TORCHESRely on cylinder pressure for performance.

Therefore on a very cold day a valve torch will havea very small to almost no flame.

On a very warm day, the flame will be very large andthe valve would have to be turned down a bit toobtain a useable flame


TS1100-E MIXED GAS KIT (TRIGGER START)

GENERAL PURPOSE FLAMESuitable for most jobs except where high heat intensity is required.(Tri-Lobular)

FLAME CONTROLFlame control allows you toadjust the flame accordingto the flame output you want.PIEZO IGNITION

Consistent piezo-start triggerfor ease of use.

BURN PIPEStainless steel burn pipeprevents corrosion.

HANDLEPoly Carbonate ABS body andhandle for comfort and easeof use.


TS1100-E MIXED GAS KIT

HEAT OUTPUT/BURNTIMETotal heat output is .79kW/hour.Using less than .9 gram/minuteof fuel the burn time on a full cartridge is 6 hours.

BASEDelivered with a plastic base stand,to stabilize the product.

NONE FLARINGPatented technology preventsthe torch from flaring when usedupside down or tilted.

CAPACITYSoft-solder capacity withMixed Gas is fromØ 3 – 19mm pipe diameter.

TS1100-E MIXED GAS KIT (TRIGGER START)

VALVE TORCHESRely on cylinder pressurefor performance.


TS1000-E MIXED GAS KIT(TRIGGER START)



PIEZO IGNITIONPiezo-start forefinger triggerfor ease of use.

HANDLEPoly Carbonate ABS body andhandle for comfort and easeof use.

ERGONOMIC TORCHTorch head is tilted for easy of use and allowing more control to the end user.

FRACTURE GROVEMachined in fracture grove to control breakage point and prevent gas leakage if dropped or abused.


TS1000-E MIXED GAS KIT

HEAT OUTPUT/BURNTIMETotal heat output is .66kW/hour.Burn time on a full cylinder mixedgas is 7 hours.

BASEDelivered with base to stand, rest or stabilize the product.

NONE FLARINGPatented technology preventsthe torch from flaring when usedupside down.

REGULATEDThe torch is regulated whichmeans that it will work wellunder both warm and coldweather conditions.



PBHOS-E MIXED GAS


HOSE1.2m long hose for betteraccessibility and use inawkward places.

HANDLESoft grip handle for comfortand ease of use.

GAS REGULATIONGas regulation on bothhandle and the bottleneck connection forsafety and ease of use.



PBHOS-E MIXED GAS

HEAT OUTPUT/BURNTIMETotal heat output is .68kW/hour.Burn time on a full cylinder mixedgas is 6.9 hours.

NONE FLARINGPatented technology preventsthe torch from flaring when usedupside down.


BASEDelivered with base to stand, rest or stabilize the cartridge.


PBLAN MIXED GAS


HANDLEPoly Carbonate ABS body, handle and screw on cartridge holderfor comfort and ease of use.


NO FLARINGPatented technology preventsthe torch from flaring when usedupside down.

FRACTURE GROVEFracture grove in air holes toprevent gas leakage if droppedor abused.


PBLAN MIXED GAS

HEAT OUTPUT/BURNTIMETotal heat output is .74kW/hour.Burn time on full cartridge is 3.65hours.

CAPACITYSoft-solder capacity with MixedGas is from Ø 3 – 15mm pipediameter.

TARGET CUSTOMERThe torch is aimed at less frequentusers looking for a low price pointsolution.


BERNZOMATIC BUTANE GAS

APPLICATIONThis product is designed for andbest used for most hobby applications such as: jewellery,cooking and electric soldering.

B-330-ETECHNICAL SPECIFICATIONS

330g Cartridge of Butane Gas.

Connection threads similar to other competitor cans and can accept competitor torches.

Plastic cap to prevent grease or tampering with valves during shipping or point-of-sale.

TÜV approval and certification to European Standard EN 417.

UN 1950.


ALTERNATIVE CARTRIDGE SIZES

B175-E175g Butane Gas cartridge.

Other Technical Specs. asB330-E.

60g BUTANE60g Butane Gas cartridge.

Standard cigarette lighter refillcan and stem.

Used for refilling lighters, gasmatches or butane torches.

Other Technical Specs. asB330-E.



PS135 SOLDERING IRON BUTANE REFILLABLE 3-IN-1

APPLICATIONFor computer and radio repairs,general electric soldering.3-in-1 use as product includessoldering tip, blow torch and hotair blower.

TRANSPARENT GAS CYLINDERAllows user to see how much gasis inside.

REFILLABLEA valve at the base allows for filling andrefilling using standard cigarette lighterrefil cans (Bernzo 10503514).

ON/OFF + PIEZO IGNITIONOn/Off switch and Piezo ignition for ease of use.

GAS FLOW CONTROLAdjustable gas flow allowsregulation of heat output.



PS135 SOLDERING IRON BUTANE REFILLABLE 3-IN-1

HEAT OUTPUTTotal heat output is 256 watts.

BURN TIMEBurn time on full is app. 80 min. before refilling.

COVER CASESProtective plastic cover casesfor safe storage.

CONVENIENTGas-powered soldering irons aremore portable than their electricrivals as there is no need for mainsor power supply.



PS100 SOLDERING IRON BUTANE REFILLABLE

APPLICATIONFor computer and radio repairs,general electric soldering.

TRANSPARENT GAS CYLINDERAllows user to see how much gasis inside.


ON/OFF On/Off switch for ease of use.

COVER CASE/SPARK LIGHTERCombined spark lighter/protective plastic cover case for safe storage.

HEAT OUTPUT/BURNTIMETotal heat output is 137 Watts.Burn time on full is app. 80 min.before refilling.



ST150K SMALL BUTANE REFILLABLE MICRO FLAME KIT

APPLICATIONFor computer and radio repairs,general electric soldering, jewellery work and other small jobs where localized heat is required.





ST150K SMALL BUTANE REFILLABLE MICRO FLAME TORCH KIT

WIRE STANDSmall wire stand to stabilize or restthe product.

ACCESSORIESComes complete with solder tube, hot knife,soldering tips and sponge.

HEAT OUTPUT/BURN TIMETotal heat output is 165 Watts and burn timeon full is app 30 min. before refilling.

CONVENIENTGas-powered soldering irons aremore portable than their electricrivals as there is no need for mainsor power supply.



ST100T SMALL BUTANE REFILLABLE MICRO TORCH

ACCESSORIESComes with soldering tip.

APPLICATIONFor computer and radio repairs,general electric soldering, jewellery work and other small jobs where localized heat is required.



WIRE STANDSmall wire stand to stabilize or restthe product.

HEAT OUTPUT/BURN TIMETotal heat output is 165 Watts and burn timeon full is app 30 min. before refilling.



ST1100T SMALL BUTANE MICRO TORCH

APPLICATIONFor general electric soldering, cookingand other small jobs where localizedheat is required.This torch is often purchased for cookingand crème desers for caramelising sugar.

ACCESSORIESComes with soldering tip.


SOFT GRIPPlastic main body with softgrip.

PIEZO IGNITIONPiezo ignition and safety latchin the back for easy ignition.Safety latch must be released(press down) before use of the Piezo ignition.

HEAT OUTPUT/BURNTIMETotal heat output is 165 Watts.Burn time on full is app. 50 min.before refilling is needed.

Date post:	19-Jan-2015
Category:	Technology
Upload:	sharon-samuel
View:	86 times
Download:	0 times

IRWIN - Bernzo mixed gas

Technology