+ All Categories
Home > Documents > ISE Spec Sheet-Contractor 333 -...

ISE Spec Sheet-Contractor 333 -...

Date post: 27-Feb-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
This model offers the following features and benefits: • 3/4 Horsepower Heavy Duty Motor (Quiet Dura-Drive ® Induction Motor) • 3-Year We Come To You ® In-Home Parts And Labor Service Warranty • Stainless Steel Grind Components • Quick Lock ® mounting for fast, easy installation • Polished stainless steel flange with 1-piece stainless steel stopper Submittal Sheet Job Specifications Specifications Model CNTR333 Type of Feed Continuous On/Off Control Wall Switch Motor Single Phase HP 3/4 Volts 120 HZ 60 RPM 1725 Amp. (Avg. Load) 9.52 Time Rating Intermittent Lubrication Permanently Lubricated Upper & Lower Bearings Shipping Weight (Approx.) 15 lbs. 8 oz. Unit Finish Black Overall Height 12-5/8” Grind Chamber Capacity 26 oz. Motor Manual Reset Protection Overload Average Approx. 1 Gallon per Water Usage Person Per Day Average Electrical Usage 3-4 KWh per Year Drain 1-1/2” Cushioned Connection Slip Joint Dishwasher Drain Connection Yes Food Waste Disposers Dimensions Food Waste Disposer(s) shall be InSinkErator Contractor 333 continuous feed, with 3/4 H.P. motor, stainless steel grinding elements with two stainless steel 360° swivel lugs. Self-service wrench. Warranty: 3- Year parts and in-home service. Sample Specification The complete InSinkErator Contractor 333 warranty is included in the Care & Use Booklet packed with each unit. * * Distance from bottom of sink to center line of disposer outlet. Add 1/2" when stainless steel sinks are used. ** Length of tailpipe from center line of disposer outlet to end of tailpipe. NOTE: Plumb waste line to prevent standing water in disposer motor housing. 1-800-558-5700 www.insinkerator.com 4" Dishwasher Drain Connection 5" 6" 12 5 /8" 6 3 /4" Contractor333 The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration is a trademark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. H695-10H-64-02 Printed in U.S.A. © 2010 InSinkErator, InSinkErator is a division of Emerson Electric Co. All Rights Reserved. The mark of responsible forestry BV-COC-080715 © 1996 Forest Stewardship Council A.C. Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycled to produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.) www.insinkerator.com/green FPO
Transcript
Page 1: ISE Spec Sheet-Contractor 333 - InSinkEratorimages.insinkerator.com/pdf/contractor333_specs.pdfInSinkErator Contractor 333 continuous feed, with 3/4 H.P. motor, stainless steel grinding

Evolution™ PRO Excel™

This model offers the following features and benefits:

• 3/4 Horsepower Heavy Duty Motor (Quiet Dura-Drive® Induction Motor)

• 3-Year We Come To You® In-Home Parts And Labor Service Warranty

• Stainless Steel Grind Components

• Quick Lock® mounting for fast, easy installation

• Polished stainless steel flange with 1-piece stainless steel stopper

Submittal Sheet

Job Specifications

SpecificationsModel CNTR333

Type of Feed Continuous

On/Off Control Wall Switch

Motor Single Phase

HP 3/4

Volts 120

HZ 60

RPM 1725

Amp. (Avg. Load) 9.52

Time Rating Intermittent

Lubrication Permanently Lubricated Upper & Lower Bearings

Shipping Weight (Approx.) 15 lbs. 8 oz.

Unit Finish Black

Overall Height 12-5/8”

Grind Chamber Capacity 26 oz.

Motor Manual ResetProtection Overload

Average Approx. 1 Gallon per Water Usage Person Per Day

AverageElectrical Usage 3-4 KWh per Year

Drain 1-1/2” CushionedConnection Slip Joint

DishwasherDrain Connection Yes

Food Waste Disposers

Dimensions

Food Waste Disposer(s) shall beInSinkErator Contractor 333 continuous feed, with 3/4 H.P. motor, stainless steel grinding elements with two stainless steel 360° swivel lugs. Self-service wrench.

Warranty:3- Year parts and in-home service.

Sample Specification

The complete InSinkErator Contractor 333 warranty is included in the Care & Use Booklet packed with each unit.

*

* Distance from bottom of sink to center line of disposer outlet. Add 1/2" when stainless steel sinks are used. ** Length of tailpipe from center line of disposer outlet to end of tailpipe. NOTE: Plumb waste line to prevent standing water in disposer motor housing.

1-800-558-5700www.insinkerator.com

4"

DishwasherDrain

Connection

5"

6"

125/8"

63/4"

Contractor333™

The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration

is a trademark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the

right to change or discontinue models.

H695-10H-64-02 Printed in U.S.A. © 2010 InSinkErator, InSinkErator is a division of Emerson Electric Co. All Rights Reserved.

The mark of responsible forestry

BV-COC-080715© 1996 Forest Stewardship Council A.C.

Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycledto produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.)

www.insinkerator.com/green

PRESS COLORS

15072ISE Spec Sheet-Contractor333.ai

sb/DL 8-24-10

FILE NAME: JOB NO: DIE NO:

INITIALS: DATE: PRESS INFO:

PROCESSBLACK

FPO

Recommended