Home >Documents >iSeries: iSeries Memorandum to Users - to User v.5.1.pdf · PDF filevi iSeries: iSeries...

iSeries: iSeries Memorandum to Users - to User v.5.1.pdf · PDF filevi iSeries: iSeries...

Date post:22-Sep-2018
Category:
View:221 times
Download:0 times
Share this document with a friend
Transcript:
  • iSeries

    iSeries Memorandum to UsersVersion 5 Release 1

    SC41-5015-00

    ERserver

  • iSeries

    iSeries Memorandum to UsersVersion 5 Release 1

    SC41-5015-00

    ERserver

  • NoteBefore using this information and the products it supports, be sure to read the information inChapter 5, Notices on page 63.

    First Edition (May 2001)

    This edition applies to version 5, release 1, modification 0 of IBM Operating System/400 (Program 5722-SS1) andiSeries licensed programs. This edition applies only to reduced instruction set computer (RISC) systems.

    Copyright International Business Machines Corporation 2001. All rights reserved.US Government Users Restricted Rights Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.

  • Contents

    About iSeries Memorandum to Users viiWho should read this memorandum . . . . . . viiAdditional incompatibility information . . . . . viiWhats new . . . . . . . . . . . . . . viiiInstalling V5R1 over V4R4 . . . . . . . . . viiiDiscontinued support for certain software andhardware . . . . . . . . . . . . . . . ixInstallation considerations. . . . . . . . . . ixPTF numbers in this memorandum . . . . . . ixMemorandums for previous releases . . . . . . ixPrerequisite and related information . . . . . . ix

    Operations Navigator . . . . . . . . . . xHow to send your comments . . . . . . . . . x

    Chapter 1. Read this first . . . . . . . 1Current customers only before you install V5R1 . 1

    V5R1 requirements . . . . . . . . . . . 2Missing Telnet exit program entries . . . . . . 2

    Client Access Async Console not supported . . . . 3Migration considerations for current OperationsConsole users . . . . . . . . . . . . . . 3

    Chapter 2. OS/400 operating system . . 5APAR and PTF prefix changes . . . . . . . . 5Programming considerations . . . . . . . . . 5

    Output file changes . . . . . . . . . . . 5Security audit record changes. . . . . . . . 5Programs that use customized versions ofIBM-supplied commands . . . . . . . . . 5

    Saving and restoring journal receivers to a previousrelease . . . . . . . . . . . . . . . . 5Larger load-source disk unit required . . . . . . 6Memory requirements for installation of V5R1 . . . 6V5R1 installation time affected by automatic objectconversion . . . . . . . . . . . . . . . 6Database file conversions after upgrading to V5R1. . 7Integrated file system . . . . . . . . . . . 7

    Functional changes . . . . . . . . . . . 7Object names in the security audit journal . . . 8CCSID data conversion and Unicode support . . 10

    Object save size . . . . . . . . . . . . . 11Auxiliary I/O request field and Processing unit timefield changes . . . . . . . . . . . . . . 11Tape library improvements . . . . . . . . . 11Increase library list of an active job . . . . . . 12Command and API changes . . . . . . . . . 13

    DMPTRC authority requirements . . . . . . 13ADDPFTRG and RMVPFTRG commands . . . 13QMAXSPLF and WRKSPLF changes . . . . . 13STRPJ and ENDPJ command error messages . . 14CHGNWSUSRA default semantic change . . . 14

    Restoring and re-creating programs . . . . . . 14Changes to program observability . . . . . . 14QALWOBJRST system value can prevent objectswith validation errors from restoring . . . . . 15

    Digital signatures of iSeries objects . . . . . 15TGTRLS parameter . . . . . . . . . . . 16

    TN3270 default screen size . . . . . . . . . 16OptiConnect security changes . . . . . . . . 17AS/400 NetServer support changes . . . . . . 17Communications trace for a PPP line . . . . . . 17Client connections to the file server during startup 17Password behavior and restrictions for some APIsand communication types . . . . . . . . . 18

    Long password support . . . . . . . . . 18Maximum length of intersystem communicationsfunction password . . . . . . . . . . . 18Maximum length of conversation securitypassword . . . . . . . . . . . . . . 18Maximum length of APPC password . . . . . 18Maximum length of RMTPWD parameter . . . 18QSYSUPWD buffer and password restrictions . . 19Authority requirements for QSYCHGDS . . . . 19CHGDSTPWD behavior . . . . . . . . . 19Distributed relational database architectureconsiderations . . . . . . . . . . . . 19

    Performance monitor and collection services . . . 19Domain Name System (DNS) configuration. . . . 20IBM Development Kit for Java . . . . . . . . 20Fields removed from the QAYPESTATS andQAYPETASKI files . . . . . . . . . . . . 20IP security, IP filtering, and NAT enhancements . . 21

    RMVTCPTBL command changes . . . . . . 21IP rules . . . . . . . . . . . . . . . 21ICMP datagrams . . . . . . . . . . . 21IP filtering . . . . . . . . . . . . . . 22

    Calls to Digital Certificate Management exitprograms . . . . . . . . . . . . . . . 22Changes to MI instructions . . . . . . . . . 22

    MATRMD option 0x13. . . . . . . . . . 22Number of Configured Processors field valuechanged . . . . . . . . . . . . . . 22

    Service tools user IDs extended to STRSST andOperations Navigator . . . . . . . . . . . 22

    Changes to service tools user ID passwords andauthentication . . . . . . . . . . . . 23Functional privileges . . . . . . . . . . 24Service tools server . . . . . . . . . . . 24

    Save and restore operations for service tools userIDs . . . . . . . . . . . . . . . . . 25OS/400 user profile passwords change . . . . . 25Authority change for the QWDRSBSD andQSPRJOBQ APIs. . . . . . . . . . . . . 25Description for *INTERACT and *SPOOL sharedpools now set during installation . . . . . . . 26Service functions dump viewer . . . . . . . . 26SNMP MIB support . . . . . . . . . . . 26TCP/IP and server startup changes . . . . . . 26

    TCP/IP autostart changes . . . . . . . . 26Starting or ending all TCP/IP serversinteractively . . . . . . . . . . . . . 27

    Copyright IBM Corp. 2001 iii

    ||

    |||

    ||||

    ||

    ||

    ||||

    |||||||||||||

  • Autostart setting for the DDM server . . . . . 27DDM and DRDA connection limitations . . . . . 27Printer file attributes and behavior changes. . . . 28

    IGCDTA attribute automatically set to *NO forsingle-byte printing. . . . . . . . . . . 28Failures caused by sending some spooled outputto V4R5 and earlier systems . . . . . . . . 28

    Authority changes to dump commands . . . . . 28QP2TERM and QP2SHELL behavioral changes forOS/400 PASE. . . . . . . . . . . . . . 28

    QP2TERM and QP2SHELL login shells . . . . 28Job name changes for QP2TERM and OS/400PASE run-time functions . . . . . . . . . 28

    SAVE, RESTORE, and LICPGM menu commandsare library qualified . . . . . . . . . . . 29Optical drive API and command changes . . . . 29Default value for Format Ethernet Data Only fieldchanges. . . . . . . . . . . . . . . . 30Algorithms changing for some math functions. . . 30Network server description object behavior. . . . 30

    *BASE network server description objects nolonger supported . . . . . . . . . . . 30Windows network server description objectconversion and file size change . . . . . . . 32

    Vary processing changes at IPL . . . . . . . . 32Maximum number of error log entries enforced . . 32Byte offset granularity enhanced forDosSetFileLocs64() API . . . . . . . . . . 32TCP/IP, SLIP, and PPP communications . . . . . 33Processing flow change in RIGS program . . . . 33pipe() API remapped to return pipe descriptor . . 33Valid SQL package names enforced for applications 34QSYGETPH API behavioral changes . . . . . . 34OS/400 internal control blocks more secure. . . . 34TCP-only option removed from Ethernet commands 35

    Chapter 3. Options . . . . . . . . . 37Example Tools Library (Option 7) . . . . . . . 37Host Servers (Option 12) . . . . . . . . . . 37

    Host servers part of OS/400 . . . . . . . . 37Customizations to prestart job entries. . . . . 37Subsystem changes for prestart jobs of thedatabase host server . . . . . . . . . . 37Remote SQL Server no longer supported as partof OS/400 . . . . . . . . . . . . . . 38ENVY/400 server not supported in V5R1 . . . 38

    CPA Toolkit (Option 15) . . . . . . . . . . 38Extended NLS Support (Option 21) . . . . . . 39Directory Services (Option 32) . . . . . . . . 39

    Directory Services part of OS/400 . . . . . . 39Directory Services server default configuration . 39

    Digital Certificate Manager (Option 34) . . . . . 40Making digital certificate store available topre-V4R5 systems . . . . . . . . . . . 40Recovery of stashed passwords . . . . . . . 40

    Chapter 4. Licensed programs . . . . 41Backup and Recovery (5722BR1) . . . . . . . 41iSeries Integration for Windows Server (5722WSV) 41Operations Navigator . . . . . . . . . . . 41

    Hierarchy changes . . . . . . . . . . . 41File system changes . . . . . . . . . . 41

    Lotus Domino products for iSeries. . . . . . 42Minimum supported version of QuickPlace forAS/400 (5733-LQP) . . . . . . . . . . . 42Minimum supported versions of Domino forAS/400 (5769-LNT) . . . . . . . . . . . 42Integration support with system distributiondirectory to be removed . . . . . . . . . 42

    Performance Tools for iSeries (5722-PT1). . . . . 42Collection Services used instead of PerformanceMonitor . . . . . . . . . . . . . . 42Performance report printing errors . . . . . 43Changes to message PFR9805 . . . . . . . 43

    TCP/IP Connectivity Utilities for iSeries (5722-TC1) 43SMTP file conversion . . . . . . . . . . 43Antispam file QTMSADRLST no longersupported . . . . . . . . . . . . . . 43Data area changes . . . . . . . . . . . 43DIALSCD parameter changes on CHGSMTPA . . 44MIME note storage . . . . . . . . . . . 44File Transfer Protocol (FTP) . . . . . . . . 44Pascal API support withdrawn . . . . . . . 46

    HTTP Server (5722-DG1) changes . . . . . . . 46HTTP Server requires JDK 1.2 . . . . . . . 46HTTP ADMIN configuration file changes . . . 46HTTP Server security a

Click here to load reader

Reader Image
Embed Size (px)
Recommended