ISHAN EQUIPMENTS PVT LTDISHAN EQUIPMENTS PVT LTD
DESIGNDESIGNENGINEERINGENGINEERINGMANUFACTURINGMANUFACTURINGRUBBER LININGRUBBER LINING
ISHAN EQUIPMENTS PVT.LTDISHAN EQUIPMENTS PVT.LTD. . (Expertise in Engineering Services)(Expertise in Engineering Services)PREPRE--QUALIFICATION 2013QUALIFICATION 2013
PAINTINGPAINTINGGLASS FLAKES LININGGLASS FLAKES LININGPHC COATINGPHC COATINGPU COATINGPU COATING
UNDER ONE ROOFUNDER ONE ROOF
1Page
PREPRE QUALIFICATION 2013QUALIFICATION 2013 UNDER ONE ROOFUNDER ONE ROOF
CONTENTS
01.HISTORY OF COMPANY
02.CMD MESSAGE
11.BUSINESS DIVISION
12.ENGINEERING & DESIGN CAPACITY
03.BUSINESS POLICY
04.BUSINESS INNOVATION
05.QUALITY ASSURANCE SYSTEM
13.MANUFACTURING FACILITIES
14.INSPECTION EQUIPMENTS
15.PRODUCTS
16.TECHNOLOGY PARTNERS06.CERTIFICATES
07.COMPETITVE HANDLING ENVIRONMENT 17.CLIENTS
08 SHOP OVERVIEW 18 RUBBER LINING FACILITIES
09.ORGANIZATION CHART
10.THE SALES
08.SHOP OVERVIEW
19.LIST OF JOB EXECUTED
18.RUBBER LINING FACILITIES
2Page
PRE‐QUALIFICATION
01 HISTORY OF COMPANY01.HISTORY OF COMPANY
Established Ishan Equipments Unit # 1 Fabrication Unit Acquired Lloyd's Certificate Opened Unit #2 22,500 M2
1983 1996 2000 2005 2006 2007
Established Shri Ram RubtechMFG.of Rubber Lining Unit
Acquired ISO 9001 : 2000 BV Certificate
Licensed from PESO
Acquired Registration ofIBR Certit.& Technical
C b S &Acquired Registration of Technical Committee
Contract bet. ISHAN & DHP
2008 2008 2009 2010 2011 2012
Acquired Certificate from UHDE India
Acquired PDIL CertificateBusiness
Co‐Operation with DHP Engg, Korea & AQT s.r.l Italy
3Page
02 CMD MESSAGE
PRE‐QUALIFICATION
02.CMD MESSAGE
Ishan is an original Sanskrit name has its roots in the word ”Ish” means invisible power. We are driven by this power and blessed with the creativity showered by GodWe are driven by this power and blessed with the creativity showered by God “Vishvakarma”. We understand the metallurgy carry out design & engineering and fabricate equipment that has ultimate use in the process industry.
Since inception our group has earned a reputation for providing solutions to customer’s problem. The group has more than 30 years of experience and offers a wide range of products to cater to diverse industries with the main motive ofa wide range of products to cater to diverse industries with the main motive of serving India industry with quality products.
We started engineering & fabrication unit Ishan Equipments Pvt. Ltd. which undertakes turnkey assignment covering Design, Supply, Installation and Commissioning of Deaertor, Pressure Vessels, Heat Exchangers, Steam Surface Condenser FW Heater Storage TanksCondenser, FW Heater, Storage Tanks..
May your precious business and family be successful today and tomorrow!
Thank You,
M K M P h lMr.K.M.PanchalCMD
4Page
03 BUSINESS POLICY
PRE‐QUALIFICATION
03.BUSINESS POLICY
Motto of Company Business Policy Business Targetp y y g• Passion• Concentration• Precision
• Security Quality Competitiveness• Stabilization of Management• Secure the Cost Competitiveness
•21 C World Class Company in the section of Power Plant, Oil Refinery & Petrochemical Plant, Steel & Iron Plant, Chemical Plant
WORLD CLASS LEADER
5Page
PRE‐QUALIFICATION
04 BUSINESS INNOVATION04.BUSINESS INNOVATION
India’sUntil uncut gemstone
become Diamond
India s
Successful
Honest
Active
Nascent
6Page
PRE‐QUALIFICATION
05 QUALITY ASSURANCE SYSTEM05.QUALITY ASSURANCE SYSTEM
“To know the customer’s needs and to make it realized”We believe that the “Strict quality assurance system is the most important policy to build customer satisfaction”.Ishan operates ISO 9001:2000 and the quality assurance program for every project.Ishan quality assurance team knows The customer requirement very well and fulfills it by following their strict quality policy.Ishan implements quality assurance system to produce quality products with leading edge technology.Ishan is moving forward to achieve its goal.From manufacturing to delivery it passes through ISO 9001, ASME ,TEMA,API 650 Standards and their procedures.Therefore the company intends the quality satisfaction that never allows any kinds of irregularity.p y q y y g y
“Operate mandatory requirement program for Quality Assurance”Organization Quality Assurance Program & Design ControlProcurement Document ControlInstructions, Procedures and DrawingsDocument Control
ASMEASME
Document ControlControl of Purchased Items and ServicesIdentification and Control of ItemsControl of processesInspection & Test ControlControl of Measuring and Test EquipmentH dli S d Shi i
KEPIC ISO
QAQA
Handling, Storage and ShippingInspection and Test StatusControl of Nonconforming ItemsCorrective ActionQuality Assurance Records & Audits
ISO
7Page
PRE‐QUALIFICATION
06.CERTIFICATES OF ISO 9001 & EIL (1/4)
Page 8
PRE‐QUALIFICATION
06.CERTIFICATES OF PDIL & IBR (2/4)
Page 9
PRE‐QUALIFICATION
06.CERTIFICATES OF UHDE INDIA & LLOYD’S (3/4)
Page 10
PRE‐QUALIFICATION
06.CERTIFICATES OF CCOE & TECH.DEV.COMMT. (4/4)
Page 11
PRE‐QUALIFICATION
06 CERTIFICATES (2/2)06.CERTIFICATES (2/2)
Sr. No. Certificate Issued By & Range Issued Date
1. ISO 9001 : 2000 QA International Ltd. 2000
f l f f f2.
Dept. of Explosive for manufacture of Static & Mobile Equipments
PESO 2006
3. Lloyds’s Register for Pressure Vessels Lloyd’s Register 2005
4. UHDE India for Tanks & Vessels CS up to 50mm thk & 50 MT 2008
5. BUREAU VERITAS BUREAU VERITAS 2000
6. TDC (Technical Development committee) Technical Development Comity for Indigenous Materials : CS PV
& Tanks up to 45 mm thk and 25 MT2008
7. ENGINEERS INDIA LIMTEDCS UP TO 36 MM & 60 MTSS UP TP 12 MM & 60 MT
2009
8. Office of the Director Of Boilers (IBR) Heat Exchangers & Pressure Vessels under IBR 1950 2009
9. PROJECTS & DEVELOPMENT INDIA LTD CS/SS UPTO 30 KG/CM2 G 2010
10. UHDE INDIA/ THYSSENKRUPP 50MM THK X 20 M LONG: MAX WEIGHT 50 MT 2008
11. ISO 14000 In process. Expected by July 2013. In Process
12. ISO 18000 In process. Expected by July 2013.In Process
13. ASME ‘U’ STAMP approval In process. Expected by July 2013.In Process
14. ASME ‘R’ STAMP approval In process. Expected by July 2013.In Process
12Page
PRE‐QUALIFICATION
07 COMPETITVE HANDLING ENVIRONMENT (1/2)07.COMPETITVE HANDLING ENVIRONMENT (1/2)
Ishan Unit‐1,Ranoli (Vadodara)
Distance:15 Km(9.32 Mile)s a ce 5 (9 3 e)Time:30 Min
Handling Capacity
Max Weight:50 TonMax Length:9.5 M
13Page
PRE‐QUALIFICATION
07 COMPETITVE HANDLING ENVIRONMENT (2/2)07.COMPETITVE HANDLING ENVIRONMENT (2/2)
Ishan Unit‐2,Sankarda (Vadodara)
Distance:20 Km(12.4 Mile)s a ce 0 ( e)Time:35 Min
Handling Capacity
Max Weight:60 TonMax Length:12.5 M
14Page
PRE‐QUALIFICATION
08 SHOP OVERVIEW Ishan Unit # 108.SHOP OVERVIEW – Ishan Unit # 1
Plot AreaPlot Area 3900 square meters with heavy RCC Floor3900 square meters with heavy RCC FloorPlot AreaPlot Area 3900 square meters with heavy RCC Floor3900 square meters with heavy RCC Floor
Covered AreaCovered Area
40 Mtr. width x 43 Mtr. Length Open Fabrication bays with EOT (with RCC 40 Mtr. width x 43 Mtr. Length Open Fabrication bays with EOT (with RCC Floor)Floor)15 Mtr. width x 43 Mtr. Length15 Mtr. width x 43 Mtr. Length –– Two Nos Machine shop (with RCC Floor)Two Nos Machine shop (with RCC Floor)15 Mtr. width x 43 Mtr. Length 15 Mtr. width x 43 Mtr. Length Two Nos Machine shop (with RCC Floor)Two Nos Machine shop (with RCC Floor)10 Mtr. width X 43 Mtr. Length 10 Mtr. width X 43 Mtr. Length –– one bay (with RCC Floor)one bay (with RCC Floor)
Uncovered Area Uncovered Area 1600 sq Mtr. with heavy duty concrete flooring Suitable for plate storage / 1600 sq Mtr. with heavy duty concrete flooring Suitable for plate storage / fabricationfabrication
Office & StoresOffice & Stores 400 sq Mtr. & 700 sq Mtr.400 sq Mtr. & 700 sq Mtr.
20 MT & 15 MT EOT with 7.5 Mtr. Clear Hook Height in Fabrication bays20 MT & 15 MT EOT with 7.5 Mtr. Clear Hook Height in Fabrication baysHandling FacilityHandling Facility 50 MT Goliath crane with 9.5 Mtr. Clear Hook Height 50 MT Goliath crane with 9.5 Mtr. Clear Hook Height
1 Nos. 14 MT 1 Nos. 14 MT ‐‐ HYDRA mobile crane HYDRA mobile crane
15Page
PRE‐QUALIFICATION
08.SHOP OVERVIEW – Ishan Unit # 2
Plot Area 22500 square meters
Covered Area 87 Mtr. width X 110 Mtr. Length With Heavy duty concrete flooring (Total – 9570 Sq. mtr.)
Uncovered Area 12930 Sq. Mtr. ‐ Uncovered Area with heavy duty concrete flooring Suitable for plate storage / fabrication
Office & Stores 400 sq Mtr. & 700 sq Mtr.
ASize of shed No‐1 :‐ 18.5 mtr. W X 110 mtr. Long 2 Nos. 30 MT & 1 No. 10 MT EOT w/ 5 MT Auxiliary & 12.5 Mtr Clear Hook Height
BSize of shed No‐2 16.5 mtr W X 110 mtr Long 1 No. 60 MT Goliath crane with 15 MT Auxiliary & 12.5 Mtr. Clear Hook Height 1 N 20 MT G li th ith 15 MT A ili & 12 5 Mt Cl H k H i htHandling
Facility
1 No. 20 MT Goliath crane with 15 MT Auxiliary & 12.5 Mtr. Clear Hook Height
CSize of shed No‐ 3 :‐ 18.5 Mtr. W X 110 Mtr. Long 2 Nos. 30 MT EOT with 5 MT Auxiliary & 12.5 Mtr. Clear Hook Height
DSize of shed No‐ 4 :‐18.5 Mtr. W X 110 Mtr. Long 2 No. 20 MT EOT Crane with 12.5 Mtr. Clear Hook Height
E Size of shed No‐ 5 :‐ 15 Mtr. W X 110 Mtr. Long. (Dedicated for SS work ) 2 Nos. 16 MT ‐ HYDRA mobile crane
Blasting Booth :1 No. 8 Mtr W X 8 Mtr. HT X 15 Mtr Lg. – with dust collecting system 1 No. 6.5 Mtr W X 8 Mtr HT X 15 Mtr Lg. – with dust collecting system
Painting Booth : 1 No. 8 Mtr. W X 8 Mtr. HT X 15 Mtr Lg. – with Backing system
Furnace (I P )
: Size For Stress Relieving :‐ 6 Mtr W X 6 Mtr HT X 16 Mtr. Lg. (In Progress) (In Progress) : Size For Normalizing :‐ 6 Mtr X 6 Mtr X 3.5 Mtr Lg. (In Progress)Inter connection
: 100 MT & 50 MT Internal Rail to connect all four Nos. shed
Bad Plate : 4 Mtr. X 10 Mtr
Power Back up : 200 KVA Kirloskar make DG Set
Water : 2”ø Water Pipeline from irrigation dept, Optional 6” ø Tube well 600 Ft Deep.
16Page
Water Resources
p g p , p p
: 1,00,000 Ltr. Water Reservoir
PRE‐QUALIFICATION
09 ORGANIZATION CHART09.ORGANIZATION CHART
CMD (UNIT‐1 & 2)
Director (UNIT‐1 & 2)
MANAGEMENT DEPARTMENT
SALES DEPARTMENT
ENG.& EPC DEPARTMENT
MANUFACTURING DEPARTMENT
QA / QC TEAM
Financial Management Team
Information Strategic Team
Sales Team
Estimation Team
Equipments Design Team
Drafting Services Team
Production Manufacturing Team
Planning Team
Procurement TeamBasic & Detail
Engineering TeamTechnical Affairs Cooperation Team
Project Management Team
Board Members Administration Engineers Welders Workers Total
6 15 26 32 71 150
17Page
PRE‐QUALIFICATION
10 SALES TARGET10.SALES TARGET
60
40
50
Amount in Crores
YEAR2008‐09
2009‐10
2010‐11
2011‐12
SALES 15 18 21 30
20
30
40 SA S(Ishan) 15 18 21 30
0
10
20
0
08 ‐ 09 09 ‐ 10 10 ‐ 11 11 ‐ 12 12 ‐ 13 Target
18Page
PRE‐QUALIFICATION
11 BUSINESS DIVISION11.BUSINESS DIVISION
Po er Plant Water Treatment Metallurgical Petrochemicals R fi &
Fertilizers Power Plant Plant
gIndustries
Refinery & Chemical Industries Industries
Shell & Tube Type H.E.Condenser
d
Ion exchangeRO Process Vessels
CS & SS RLBL VesselLeaching & Purification Process
Pressure & Reaction Vessels Fume StacksSite
ScrubberSilosStorage Tanks
Condensate Polishing Unit
VesselsFilterSphere
Process VesselsConcrete RL & BL Thickener
Site Fabricated Storage Tanks VRU & PHE
Ammonia Storage Bullet Tanks
19Page
PRE‐QUALIFICATION
12 ENGINEERING & DESIGN CAPACITY12.ENGINEERING & DESIGN CAPACITY
Basic Engineering
Mechanical Design
Eng’g / Design Program
Reactors Pressure Vessel, Shell & Tube H.E., Stack, Column, Towers, Scrubbers, Furnaces,
Dish Ends, Storage Tanks, Sphere etc.
20Page
PRE‐QUALIFICATION
13 MANUFACTURING FACILITIES Ishan Unit # 1 (1/2)13.MANUFACTURING FACILITIES ‐ Ishan Unit # 1 (1/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
3 0 Mtr width x 50 mm thick 11. Plate Bending Machine
3.0 Mtr. width x 50 mm thick 2.5 Mtr. width x 20 mm thick 1.7 Mtr. Width x 10 mm thick
111
No.
2. Hydraulic Press 4800 mm width x 50 mm thick ‐ pre‐pinch 1 Unit1000 ton capacity
6 Mtr Vertical x 6 Mtr Horizontal With 30
3. SAW Column & Boom
6 Mtr. Vertical x 6 Mtr. Horizontal With 30 MT Rotator set
Power source 1200 A DC 3 Mtr. Vertical X 4 Mtr. Horizontal with 30
MT Rotator set
11
No.
4. Plasma cutting (Air) 50 thick SS plate 2 Nos.4. Plasma cutting (Air) 50 thick SS plate 2 Nos.
5. Welding power source 600 A DC 15 Nos.
6. Radial Drilling Machine80 mm x 2 Mtr. Reach 40 mm x 1 Mtr. Reach
22
Nos.Nos.
7. Portable Trepanning m/c 50 mm Capacity 2 Nos.
8. Pug Cutting Units 6 Nos.
21Page
PRE‐QUALIFICATION
13 MANUFACTURING FACILITIES Unit # 1 (2/2)13.MANUFACTURING FACILITIES ‐ Unit # 1 (2/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
9. Gas cutter sets 15 Sets
10. Gas cutter setsAG7 AG 5
155
Nos.Nos.
11. Flexible Shaft grinder 5 Nos. Heavy Duty
12 L th t 16 i h C t H i ht 4 N12. Lathes up to 16 inch Center Height 4 Nos.
13. Chain Pulley Blocks5 MT 3 MT
2520
Nos.Nos.
14. Rotators 30 MT50 MT
1010
SetSet
15. Hydro Test Pressure Pump Up to 210 Kg Pressure 1 Nos.
16. Hacksaw machine 1” X 12” Pipe & up to 150 Dia Rod 2 Nos.
17. Pipe Cutting Machine 1” to 3” Pipe 1 Nos.
00 C t 4000 C (18” X 18”) (f W ldi18. Mother Oven
00 C to 4000 C (18” X 18”)‐(for Welding Electrodes)
3 Nos.
19. Portable Oven 00 to 1000 C (for Welding Electrodes) 12 Nos.
22Page
PRE‐QUALIFICATION
13 MANUFACTURING FACILITIES Ishan Unit # 2 (1/2)13.MANUFACTURING FACILITIES ‐ Ishan Unit # 2 (1/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
1. Plate Bending Machine3.0 Mtr. width x 50 mm thick2.0 Mtr. width x 16 mm thick
12
No.Nos.
2. SAW Column & Boom6 Mtr. Vertical x 6 M Horizontal With
30 T Rotator set 2 Nos.
3 H d li P800 ton capacity 5000 mm width x 50
1 N3. Hydraulic Press800 ton capacity 5000 mm width x 50
mm thick ‐ pre‐pinch1 No.
4. Plasma cutting (Air) 50 thick SS plate 2 Nos.
5. Welding power source 600 A DC 30 Nos.
6. Radial Drilling Machine 80 mm X 2 Mtr. reach 40 mm X 1 Mtr. reach
11
No.No.
7. Portable Trepanning m/c 50 mm Capacity 2 Nos.
8. Pug Cutting Units 15 Nos.
9. Gas cutter sets 25 Set
23Page
PRE‐QUALIFICATION
13 MANUFACTURING FACILITIES Unit # 2 (2/2)13.MANUFACTURING FACILITIES ‐ Unit # 2 (2/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
10. Portable GrindersAG 7AG 5
2009
Nos.Nos.
11. Flexible Shaft grinder 8 Nos. Heavy Duty
12 Ch i P ll Bl k5 MT 25 Nos.
12. Chain Pulley Blocks3 MT 20 Nos.
13. Rotators30 MT50 MT
1515
SetSet
14. Hydro Test Pressure Pump Up to 210 Kg Pressure 1 No.
15. Hacksaw machine 1” X 12” Pipe & up to 150 Dia Rod 1 No.
16. Pipe Cutting Machine 1” to 3” Pipe 1 No.
17 Mother Oven00 C to 4000 C (18” X 18”)‐(for
3 Nos17. Mother OvenWelding Electrodes)
3 Nos.
18. Portable Oven 00 to 1000 C (for Welding Electrodes) 12 Nos.
24Page
PRE‐QUALIFICATION
14 INSPECTION EQUIPMENTS (1/2)14.INSPECTION EQUIPMENTS (1/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
1 Ultrasonic Thickness tester Up to 300 mm thick 1 No1. Ultrasonic Thickness tester Up to 300 mm thick 1 No.
2. Vernire calipers Up to 610 mm thick 3 Nos.
3. Micrometer Up to 150 mm thick 2 Nos.
4. Dial Vernire Calipers Up to 300 mm thick 1 No.
5. Dial Gauge Up to 10 mm 0 to 1 mm micron 1 No.
6. Molybdenum Tester 1 No.
7. Hardness Tester B.H. & V.H. 1 No.
8 H d li P U t 210 K P 1 N8. Hydraulic Pump Up to 210 Kg Pressure 1 No.
9. X‐Ray Viewer 1 No.
10.Air Compressor Pneumatic testing to
100 Kg/cm2g6 Kg/cm2 g 1 No.
11. Nitrogen Cylinder Manifold for air test 1 No.
12. Threaded Gauge (inside / Outside) 1 No.
13. Dye Penetration Test Kit 3 Nos.
25Page
14 INSPECTION EQUIPMENTS (2/2)
PRE‐QUALIFICATION
14.INSPECTION EQUIPMENTS (2/2)
Sr.No. Equipment Name Specification Qty. Unit Remark
14. Pressure Gauges 10 Nos.
15. Degree Filler Gauge 1 No.
16 Dial Caliper Gauge (inside) 1 No16. Dial Caliper Gauge (inside) 1 No.
17. Thickness Gauge 1 No.
18. Ting Tester 1 No.
19.Go‐no‐go gauges for Heat Exchange holes ‐3/4
t 11
No. (E h)to ‐1 (Each)
20. Template Gauge Variable Size 10 Nos.
21. Hydro Recorder 1 No.
26Page
PRE‐QUALIFICATION
15 PRODUCTS (1/4)15.PRODUCTS (1/4)
))
Limestone Filter TankLimestone Filter Tank‐‐SidemSidemFrance (5 M Dia x 8 M H x 28 France (5 M Dia x 8 M H x 28
MT Wt.)MT Wt.)
( g( g ))
Distillation ColumnDistillation Column‐‐Ishedu Ishedu Specially Chemicals Specially Chemicals
(1.2 M Dia x 35 M Lg.(1.2 M Dia x 35 M Lg.‐‐SS 304)SS 304)
Acid Storage TankAcid Storage Tank‐‐IFFCO IFFCO KandlaKandla(28 M Dia. x 12 M H)(28 M Dia. x 12 M H)
Multi Media FiltersMulti Media Filters‐‐KAIA Airport KAIA Airport (Dubai)(Dubai)
Caustic Scrubber catch tank with Caustic Scrubber catch tank with Limpact CoilLimpact Coil‐‐GNFC TDI ProjectsGNFC TDI Projects
Heat ExchangerHeat Exchanger‐‐GACL BarodaGACL Baroda
27Page
PRE‐QUALIFICATION
15 PRODUCTS (2/4)15.PRODUCTS (2/4)
Refregent Gas Pressure Vessel Refregent Gas Pressure Vessel ––MefronMefron‐‐2222
Spherical VesselSpherical Vessel‐‐BGR Energy & BGR Energy & BHEL Power ProjectsBHEL Power Projects‐‐IndiaIndia
Air Buffer VesselAir Buffer Vessel‐‐GNFC TDI GNFC TDI ProjectsProjects
Send FilterSend Filter‐‐DoshionDoshion Ltd. for Ltd. for Water Treatment PlantWater Treatment Plant
Deaertor Storage Tanks Deaertor Storage Tanks ‐‐Reliance Ind. Ltd.Reliance Ind. Ltd.‐‐DahejDahej
Deaertor for Nuclear Power Deaertor for Nuclear Power Corporation India Ltd.Corporation India Ltd.
28Page
PRE‐QUALIFICATION
15 PRODUCTS (3/4)15.PRODUCTS (3/4)
Filter Vessel for Boron Project Filter Vessel for Boron Project Heavy Water Plant Heavy Water Plant ‐‐KalpakamKalpakam
Overhead Naphtha DrumOverhead Naphtha Drum‐‐BPCLBPCL‐‐MumbaiMumbai
UHDE UHDE
))
Gas StackGas Stack‐‐ Prax AirPrax Air‐‐UHDE UHDE 6 M Dia x 40 M Lg. x 125 MT in 6 M Dia x 40 M Lg. x 125 MT in
3 Pcs.)3 Pcs.)
98 % Conc.H2SO4 Storage Tank98 % Conc.H2SO4 Storage Tank‐‐Site ActivitiesSite Activities
Nitric Acid Storage Tank Nitric Acid Storage Tank ‐‐SS 316 LSS 316 L
N2 High Pressure VesselN2 High Pressure Vessel‐‐MRPL MRPL
Page 29
PRE‐QUALIFICATION
15 PRODUCTS (4/4)15.PRODUCTS (4/4)
N2 High Pressure Storage N2 High Pressure Storage Vessel Vessel ––GVFC Ltd.GVFC Ltd.‐‐DahejDahej
Asia Biggest ThickenerAsia Biggest Thickener‐‐NalcoNalco‐‐40 M Dia40 M Dia
Scrubbing Vessel Scrubbing Vessel ‐‐ GNFCGNFC
Fuel gas KODFuel gas KOD‐‐BPCLBPCLJacket Coil Pressure Vessel Jacket Coil Pressure Vessel ‐‐
GAILGAILChlorine Storage TankChlorine Storage Tank‐‐PI PI
IndustriesIndustries
Page 30
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS16.TECHNOLOGY PARTNERS
31Page
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS16.TECHNOLOGY PARTNERS
Shiva Engineering Services ‐ Detailed Engineering for EPC (Vadodara) Packages(Vadodara) Packages
AQT S.R.L, Italy ‐ Vapor Recovery Systems DHP Eng., Korea ‐ Plate Heat ExchangersHAW / GBT Group, ‐ Rubber Lining, Glass Flake Germany.Techno vacuum, Russia ‐ VHC, FGR Systems etc.Vaprotec, Germany ‐ Evaporators & Distillations plants for
food, Oleo‐chemicals etc
32Page
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS (SES)16.TECHNOLOGY PARTNERS (SES)
Shiva Engineering Services & Ishan Equipments Private Limited entered into
MOU for following areas:MOU for following areas:
Design & Engineering for EPC/Package Projects.
Mechanical Design & Fabrication Drawings for Pressure Vessels and Equipment.
Pre‐Bid Engineering.e d g ee g
SES is a project delivery engineering firm ‐ Specializing in Engineering, Procurement support,
Construction Management Support & Start‐up.
SES serves manufacturing and industrial clients ‐ Chemical, Speciality Chemicals, Oil & Gas. g , p y ,
SES engineer small‐to‐medium size green field capital, brown field revamp projects ‐ Engineering for
Total Installed Cost (TIC) up to 200 Crores.
Strategic EPCM alliance to cater our customer sites in North America ‐ detail engineering at lowerStrategic EPCM alliance to cater our customer sites in North America detail engineering at lower
cost, accelerated schedule and apply increased resources to fast track projects.
33Page
16.TECHNOLOGY PARTNERS (SES)
PRE‐QUALIFICATION
Process Options
Steady State Simulation
Dynamic Simulation
Feasibility Studies
Vendor Co‐ordination
Inquiry & RFQ Specification
Start‐up Support
Energy/Utility Audits
( )
Feasibility Studies
Capacity Models
3D Conceptual Layouts
Inquiry & RFQ Specification
Best Value Option Analysis
VAT/FAT Support
Energy/Utility Audits
4D Project Manuals
Project as‐builds
Project Conceptualize
Engineering Planning Operational PlantProcurement
Construction
Start‐up, Operation & Maintenance
Adding Value throughout the Engineering Life Cycle
Process & Mechanical
CSA Engineering Planning, Scheduling and Monitoring
Construction Management
Contractor Bids
Optimization of Plant Performance
Electrical & Power
Instrumentation & Control Automation
PLC & HMI Design
Design Management
Technical Evaluation
Site Supervision
Capital Reduction
Sustenance Engineering
Energy management
Utility Gap Analysis
Page 34
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS (SES)16.TECHNOLOGY PARTNERS (SES)
Vent & Flare System
Distillation & SeparationStorage & Tank Farm
Piping Reactor
Chiller &
Boiler & Furnaces
Support Structure & Access l f
Waste Water Treatment
Cooling Tower
Heat Exchangers
12Warehouse
platform
Storm & Sewer
Hazardous Waste Storage13
14 Ware house‐ Fire Protection & MEP
15
17Landfill & Civil
18
Office Building‐ Architecture, Fire Protection & MEP R&D Lab
35Page
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS (SES)16.TECHNOLOGY PARTNERS (SES)
Project ManagementProject Management Process DisciplinesProcess Disciplines MechanicalMechanical
PipingPiping Civil & StructuralCivil & Structural Control & AutomationControl & Automation
36Page
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS (Advanced Quality Technologies)16.TECHNOLOGY PARTNERS (Advanced Quality Technologies)
VAPOUR RECOVERT UNITS
A VRU (Vapour Recovery Unit) is a device whichrecovers hydrocarbons vapours, generated duringloading operations at Terminals or Refineries,typically petrol or diesel.
VRUs can be “Truck VRU” if the terminal isdedicated mainly to truck loading operations, “RailVRU” if mainly trains are loaded, or “Marine VRU” ifU a y a s a e oaded, o a e Uthe unit recovers product coming from ship loading.
37Page
PRE‐QUALIFICATION
16 TECHNOLOGY PARTNERS (DHP)16.TECHNOLOGY PARTNERS (DHP)
DHP Engineering Ltd. & Ishan Equipments Private Limited entered into
MOU for following areas:MOU for following areas:
Petrochemical, Oil & Gas , Power, Fertilizers, Foodand Pharmaceutical industry has a ready access tovast PHE customer base in Indiavast PHE customer base in India.
DHP Engg of Korea has capability to cater to allsizes, applications and industry.
DHP Engg’s know how in thermal design of S&TDHP Engg s know‐how in thermal design of S&Theat exchangers is useful to Ishan Equipments.
With Ishan Equipments ‘s price competitivenessDHP Engg would offer India built PHE in otherDHP Engg would offer India built PHE in othermarkets.
38Page
PRE‐QUALIFICATION
17 CLIENTS (DOMESTIC & EXPORT # 1/2)17.CLIENTS (DOMESTIC & EXPORT # 1/2)
39Page
PRE‐QUALIFICATION
17 CLIENTS (DOMESTIC & EXPORT # 2/2)17.CLIENTS (DOMESTIC & EXPORT # 2/2)
40Page
PRE‐QUALIFICATION
18 RUBBER LINING FACILITIES18.RUBBER LINING FACILITIES
Page 41
Shell Tube Tube Sheet Channel
OXIDISER FEED COOLER
COOLING WATER
SA 240 GR 316L
SA 312 TP 316L
SA 965 F 316L
SA 965 F 316L 1000ID X 8 42mm YES 4985KG YES
WORKING SOLUTION
WORKING SOLUTION
SA 240 GR 316L
SA 312 TP 316L
SA 965 F 316L
SA 965 F 316L 365OD X 5 25mm YES 696KG YES
DRYER CONDENSER
WET WORKING SOLUTION
SA 240 GR 316L
SA 312 TP 316L
SA 965 F 316L
SA 965 F 316L 610OD X 5 25mm YES 1512KG YES
OXIDISER OFF GAS CHILLER
CHILLD WATER
SA 240 GR 316L
SA 312 TP 316L
SA 965 F 316L
SA 965 F 316L 50ID X 5 42mm YES 1103KG YES
REDENERATION COOLER
COOLING WATER
SA 240 GR 316L
SA 312 TP 316L
SA 965 F 316L
SA 965 F 316L 323OD X 4 25mm YES 593KG YES
GACL STEAM HEATER HOT WATER SA 516 GR.70 SA 179 SA 516 GR.70
SA 266 GR.2 408OD X 10 45mm YES 1200KG YES UHDE INDIA
BD COSTIC WASHING HEATER LIQUID SA 106 GR.B SA 213
TP 304SA 182 GR.304
SA 266 GR.2 219OD X 7.4 55mm YES 420KG YES IBR
CONDENSATE SUBCOOLER
CHILLD WATER SA 106 GR.B SA 213
TP 304SA 182 GR.304
SA 266 GR.2 273OD X 7.4 55mm YES 720KG YES IBR
BUTADIENE STRIPPER REBOILER
LIQUID SA 516 GR.70 ------- ---------- -------- 800OD X 12 ---- NO 1500KG YES IBR
AROMATIC LIQUID IS 2062 GR E-250 BR SA 179 520OD X 10 50mm YES 1000KG YES IBR
Unit Service
ASME SEC. VIII DIV.01 ED 2007
HYD. PEROXI
TEMA Class R/C/B
IBIC Chematur
Client Plant
SUPPLY LIST FOR HEAT EXCHANGERS AS PER TEMA
Inspection Authority
Shell Diameter
Tube Sheet
Thikness (mm)
Date of Supply
Scope of Service Thermal
Mechanical Fabrication
Metallurgu & Thikness in mm
Empty Weighit
ISHAN EQUIPMETS.PVT.LTD
RIL RIL-HAZIRA
ASME SEC. VIII DIV.01 ED 2010
SA 266 GR.2
R.LETEST EDITION
Tube to Tube Sheet
joint Expanded
Welded Grooves
GACL
TEMA Type
Shell D/End/CONE Nozzle Flange
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA
ACIDIFYING WARMING TANK API 650 SA 240
GR.316LSA 240
GR.316LSA 312
GR.316LSA 240
GR.316L 1500Ø X 10 11100 2 16,79,350.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA
ACIDIFYING CRYSTAL TANK ASME SA 240
GR.316LSA 240
GR.316LSA 312
GR.316LSA 240
GR.316L 2400Ø X 10 11100 2 33,91,100.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA
COOLING CRYSTALISING TANK ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 2400Ø X 8 16650 3 48,88,325.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA
COOLING CRYSTALISING TANK API 650 SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 2400Ø X 8 43610 7 1,16,00,925.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA
COOLING CRYSTALISING TANK API 650 SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 2400Ø X 8 12460 2 33,14,550.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA THICKENER ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 2000Ø X 8 6500 1 14,50,875.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA FILTER TANK API 650 SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 800Ø X 4 1600 2 17,11,250.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA FILTER TANK API 650 SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 800Ø X 4 1600 2 7,31,750.00 2011 CLIENT
SEBACIC INDIA LTD. SEBACIC ACID PLANT-VADODARA PRILLING TOWER ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 4500Ø X 4 16300 1 49,50,000. 2011 CLIENT
IHSEDU SPECIALITY CHEMICALS PVT.LTD.
IHSEDU SPECIALITY CHEMICALS PVT.LTD.
PRILLING TOWER ASME SA 240 GR.304
SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 4500Ø X 4 16300 1 3500000 2009 CLIENT
IHSEDU SPECIALITY CHEMICALS PVT.LTD.
IHSEDU SPECIALITY CHEMICALS PVT.LTD.
DISTILLATION TOWER ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304
SA 240 GR.304 4500Ø X 4 16300 1 3800000 2010 CLIENT
VA-TECHKAKATIYA
THERMAL POWER PROJECT
DILUTION HOT WATER TANK-CPU ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304 SA 182 F 304 2800Ø X 10 1339.4 1 4,69,900.00 2011 BVIL
VA-TECHKAKATIYA
THERMAL POWER PROJECT
SCALE INHIBITOR MEASURING TANK-
CWTPASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.4 1 4,69,900.00 2011 BVIL
Supply Year Inspection Authority
ISHAN EQUIPMENTS PVT.LTDLIST OF SS VESSEL / TANK ( EXECUTED and UNDER EXECUTION )
Client Project Item DescriptionCode of
Construction (ASME,BS,IS etc)
Material of Construction
Rolled Diameter & Shell Thikness (mm)
Empty Weight (Kgs)
Qty Value
VA-TECHKAKATIYA
THERMAL POWER PROJECT
CORROSION INHIBITOR
MEASURING TANK-CWTP
ASME SA 240 GR.304
SA 240 GR.304
SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.4 1 4,69,900.00 2011 BVIL
VA-TECHKAKATIYA
THERMAL POWER PROJECT
BIOCIDE MEASURING TANK-CWTP ASME SA 240
GR.304SA 240 GR.304
SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.4 1 24,69,649.00 2011 BVIL
HZL HZL CLZS(Pyro.) CHITTORGARH 150 MT KETTLE IS 2825 SA 240
GR.304LSA 240
GR.304L ---- SA 240 GR.304L 3500Ø X 32 6400 1 3,318,927.00 2011 SGS
GNFC150MT/DAY ETHYLE ACETATE PLANT & PROJECT No.:-0810
SEAl FLUID TANK ASME SA 240 GR.316L SA 240 GR.316L SA 312
GR.316L SA 182 F 316L 860Ø X 5 660 1 5,18,000.00 2012 BVIL
GNFC150MT/DAY ETHYLE ACETATE PLANT & PROJECT No.:-0810
ACETIC ACID REEIVING tanK SCRUBBER ASME SA 240 GR.321 SA 240 GR.321 SA 312 GR.321 SA 182 F 321 273Ø X 5 153 1 2,66,000.00 2012 BVIL
VA-TECH RAYALASEEMA THERMAL POWER PROJECT
SCALE INHIBITOR MEASURING TANK-CWTP ASME SA 240 GR.304 SA 240 GR.304 SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.41 1 4,69,900.00 2012 BVIL
VA-TECH RAYALASEEMA THERMAL POWER PROJECT
CORROSION INHIBITOR MEASURING TANK-CWTP ASME SA 240 GR.304 SA 240 GR.304 SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.41 1 4,69,900.00 2012 BVIL
VA-TECH RAYALASEEMA THERMAL POWER PROJECT
BIOCIDE MEASURING TANK-CWTP ASME SA 240 GR.304 SA 240 GR.304 SA 312 GR.304 SA 182 F 304 2200Ø X 5 1339.41 1 4,69,900.00 2012 BVIL
VA-TECH RAYALASEEMA THERMAL POWER PROJECT
DILUTION HOT WATER TANK-CPU ASME SA 240 GR.304 SA 240 GR.304 SA 312 GR.304 SA 182 F 304 2800Ø X 10 1339.41 1 24,69,649.00 2013 BVIL
GACL 60 TDP SODIUM CHLORATE PLANT PRODUCT SILO SA 240
GR.316L SA 240 GR.316L SA 312 GR.316L SA 182 F 316L 3750Ø X 5 4100 1 1,766,430.00 2012 UHDE INDIA
PVT.LTD
GACL 60 TDP SODIUM CHLORATE PLANT
HYDROGEN PEROXIDE HEAD TANK ASME SA 240
GR.316L SA 240 GR.316L SA 312 GR.316L SA 182 F 316L 1200Ø X 5 575 1 296685.00 2012 UHDE INDIA
PVT.LTD
ZEPPELINPOLYPROPYLENE UNIT FOR PH-IIII REFINERY
PROJECTBAG FILTER ASME SA 240 GR.304 SA 240 GR.304 SA 312 GR.304 SA 182 F 304 3100Ø X 4 3970 2 76,83,121.21 2013 TUV
Shell D/End Nozzle Flange
VATECH WABAG
CONDENSATE POLISHING UNIT
ACTIVATED CARBON FILTER
---- ASME SA 516 GR.70
SA 516 GR.70
SA 106 GR.B SA 105 4200Ø X 14 34432KG 1Nos. 19,57,242.32 11-Apr 11-Nov BVIL
AQUATECH AE-1021 PRESSURE SAND FILTER ------ ASME IS 2062
GR.BSA 516 GR.70
SA 106 GR.B SA 105 3000Ø X 10 6 Nos. ------ AQUATECH
THERMAX VILAYAT PAROJECT ANTHRASITE FILTER ------ ASME SA 515
GR.60SA 515 GR.60
SA 106 GR.B SA 105 3800Ø X 14 13720KG 6 Nos. 19,25,000 Des-11 May-12 THERMAX
THERMAX RENUKOT PAROJECT
ANTHRASITE FILTER ------ ASME SA 515
GR.60SA 515 GR.60
SA 106 GR.B SA 105 3400Ø X 14 16735KG 4 Nos. 15,60,000 Jan-12 Jun-12 THERMAX
BGR DADANI POWER PRE FILTER --- ASME SA 516 GR.70
SA 516 GR.70
SA 106 GR.B SA 105 1700Ø X 32 7300KG 8 Nos. 4,411,500,00 Aug-11 Jun-12 BGR-ADANI
ZEPPLINPOLYPROPLYLENE UNIT FOR PHASE III REFINERY PROJECT
CATRIDGE FILTER ------ ASME SA 312
TP 304 SA 182 TP 304 800Ø X 4 1300KG 6 Nos. 1,02,90,916.91 Des-10 Arp-11 TUV-NORD
ZEPPLINPOLYPROPLYLENE UNIT FOR PHASE III REFINERY PROJECT
BAG FILTER ------ ASME SA 312 TP 304
SA 182 TP 304 3000Ø X 6 1300KG 2 Nos. 4600000.00 Des-10 Arp-11 TUV-NORD
ISHAN EQUIPMENTS PVT.LTDSUPPLY LIST FOR FILTER
Client Project Item Description
Service
Code of Constructio
n (ASME,BS,I
S etc)
Metallurgu & SizeRolled Diameter &
Shell Thikness (mm)
Empty Weight
SA 240 SP 304
Qty ValueContractual
Delivery Date
Date of Supply
Inspection Authority
SA 240 SP 304
Shell D/End Nozzle FlangeNAVIN FLUORINE INTER NATINOL
LIMITED --------------- (M-22)
STERAGE VESSEL ----------- ASME SA 516 GR.70
SA 516 GR.70
SA 333 GR.6
SA 350 GR.7 3200Ø X 25 18850KG 1Nos. ------- -------- -------- BVIL
GNFC120 TDI GNFC TDI
PLANT BDG 340.DEP.376
NHP EMERGENCY STORGE VESSEL ---------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 2900Ø X 42 40018KG 2Nos. Mar-10 Jan-11 LLOY'D
REGISTER
FOR,ISHAN EUQIPMENTS PVT,LTD
Date of Supply
Inspection Authority
ISHAN EQUIPMETS PVT LTDSUPPLY LIST FOR LPG BULLETS
Client Project Item Description Service Code of Construct
Metallurgu & Size Rolled Diameter &
Empty Weight
Qty Value Contractual Delivery
Shell D/End Nozzle Flange
VATECH WABAG
CONDENSATE POLISHING UNIT
ACTIVATED CARBON FILTER ----------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 4200Ø X 14 34432KG 1Nos. 19,57,242.32 Arp-11 Nev-11 BVIL
VATECH WABAG
CONDENSATE POLISHING UNIT
TRECONDENSET SURGE TANK ------------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 4100Ø X 08 8200KG 1Nos. 2,10,783.30 Jun-11 Fab-11 BVIL
AQUATECH AE-1021 PRESSURE SAND FILTER ----------- ASME IS 2062
GR.BSA 516 GR.70
SA 106 GR.B SA 105 3000Ø X 10 6Nos. 7,911,950.00 AQUATECH
THERMAX VILAYAT PAROJECT ANTHRASITE FILTER ------ ASME SA 515 GR.60
SA 515 GR.60
SA 106 GR.B SA 105 3800Ø X 14 13720KG 6Nos. 19,25,000 Des-11 May-12 THERMAX
THERMAX RENUKOT PAROJECT ANTHRASITE FILTER ------ ASME SA 515 GR.60
SA 515 GR.60
SA 106 GR.B SA 105 3400Ø X 14 16735KG 4Nos. 15,60,000 Jan-12 Jun-12 THERMAX
GNFC 120 TDI GNFC TDI PLANT BDG 340.DEP.376
NHP EMERGENCY STORGE VESSEL ---------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 2900Ø X 42 40018KG 2Nos. Mar-10 Jan-11 LLOY'S
REGISTER
BGRKALISIND THERMAL
POWER PROJECT , 2 X 600MW
CONDENSATE POLISHER VESSEL -------- ASME SA 516
GR.70
SA 516 GR.70 X 65mm
SA 106 GR.B SA 105 3500Ø X 60 38438.21
KG 4Nos. 1,95,14,312 Jan-12 Aug-12 BGR
PI IDUSTRIES --------------- AIR RECEIVER ----------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 2200Ø X 12 4800KG 1Nos. 1,246,755.00 Jun-11 Nev-11 PI
IDUSTRIES
VATECH WABAG
CONDENSATE POLISHING UNIT
CONDENSATE POLISHING UNIT
(CPU) ------------ ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 2800Ø X 10 15401KG 1Nos. 94,41,39.02 Arp-11 Nev-11 BVIL
BGR DADANI POWER PRE FILTER ----------- ASME SA 516 GR.70
SA 516 GR.70
SA 106 GR.B SA 105 1700Ø X 32 7300KG 08Nos. 4,411,500,00 Aug-11 Jun-12 BGR-ADANI
BGR METTUR THERMAL POWER SATION STAGE-III
CODENSATE POLISHER VESSEL ---------- ASME SA 516
GR.70SA 516 GR.70
SA 106 GR.B SA 105 2400Ø X 45 16000KG 3Nos. 2,448,130,56 Mar-10 Jul-10 BVIL
UPL ----------- POLISHED FILTER SUDGE TANK ------ API 650 SA 106
GR.B SA 105 3000Ø X 5 ------- 1Nos. ---------- TUV
ADIYTA BIRALA
PATAL GANGA- MAHARASTRA ABSORBER -------- ASME SA 106.B SA 105 1650Ø X 8 1800KG 8Nos. ---------- UHDE INDIA
ADIYTA BIRALA
RENUKOT-ANDHRA PRADESH FINAL ABSORBER -------- ASME SA 106.B SA 105 1100Ø X 6 1300KG 1Nos. ---------- UHDE INDIA
ADIYTA BIRALA VILAYAT GUJARAT PURE BRINE HEAD
TANK -------- ASME SA 106.B SA 105 4200Ø X 6 2200KG 1Nos. ---------- UHDE INDIA
ADIYTA BIRALA VILAYAT GUJARAT ANOLYTE DRAIN
TANK -------- ASME SA 106.B SA 105 3250Ø X 10 3050KG 1Nos. ---------- UHDE INDIA
ADIYTA BIRALA VILAYAT GUJARAT AIR BUFFER VESSLE -------- ASME SA 106.B SA 105 4000Ø X 22 2650KG 1Nos. ---------- UHDE INDIA
ADIYTA BIRALA VILAYAT GUJARAT NITROGEN
RECEIVER -------- ASME SA 106.B SA 105 2800Ø X 8 9810KG 1Nos. ---------- UHDE INDIA
IS 2062 GR.A
IS 2062 GR.A
IS 2062 GR.A
IS 2062 GR.A
IS 2062 GR.A
IS 2062 GR.A
Code of Constructio
Metallurgu & Size Rolled Diameter &
Empty Weight
Qty
IS 2062 GR.A
Value Contractual
Date of Supply
Inspection Authority
ISHAN EQUIPMENTS PVT.LTDSUPPLY LIST FOR RUBBEER LINING
Client Project Item Description Service
Shell D/End Nozzle Flange
SRF 011,FMP & P14 PLANT AT SRF DAHEJ,P11 PLANT
LIGHT RECVERY COLUMN ------------ ASME SA 516
GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1800Ø X 12 51000KG 1Nos. 41,47,560.00 Aug-11 Jun-12 BVIL
SRF 011,FMP & P14 PLANT AT SRF DAHEJ, P11 PLANT
LIGHT COLUMN ------------ ASME SA 516
GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1400Ø X 12 38000KG 1 Nos. Fab-11 BVIL
SRF 011,FMP & P14 PLANT AT SRF DAHEJ, P11 PLANT PRODUCT COLUMN ------------ ASME SA 516
GR.70 SA 516 GR.70 SA 106 GR.B SA 105 800Ø X 10 ------------- 1 Nos. 16,50,000.00 Jun-11 Nev-11 BVIL
UHDE INDIA IOCL / PRAXAIR FLUE GAS STACK -------- API 650 IS 2062 GR.A --------------- SA 53
GR.BSA 234 WPB 4000Ø X 30 94500KG 1 Nos. 13,50,744 UHDE
INDIA
PRILLING TOWER -------- ASME ---------- 4500Ø X 4 20000 kgs 1 Nos. 3,500,000 IHSEDU
DISTILLATION TOWER -------- ASME SS 304 1500 Ø X 10 30000 Kgs 1 Nos. 3,800,000 IHSEDU
SIBACIC SIBACIC Acid Plant PRILLING TOWER -------- ASME SS 304 SS 304 SA 312 GR 304
SA 182 TP 304 4500Ø X 4 20000 kgs 1 Nos. 5732843 SIBACIC
Expansion Project
Contractual Delivery
Code of Construct
Inspection Authority
Empty WeightMetallurgu & Size
SA 312 GR 304
SA 182 TP 304
Service
IHSEDU SPECIALITY CHEMICAL
PRIVATE LIMITED
Date of Supply
SS 304
QtyRolled Diameter &
ISHAN EUQIPMENTS PVT .LTD
SUPPLY LIST FOR COLUMNS & TOWER
Client Project Item Description Value
Shell D/End Nozzle Flange
BGRKALISIND THERMAL POWER PROJECT ,
2 X 600MW
CONDENSATE POLISHER VESSEL -------- ASME SA 516 GR.70 SA 516 GR.70 X
65mm SA 106 GR.B SA 105 3500Ø X 60 38438.21KG 4Nos. 1,95,14,312 Jan-12 Aug-12 BGR
BGRMETTUR THERMAL
POWER SATION STAGE-III
CODENSATE POLISHER VESSEL ---------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2400Ø X 45 16000KG 3Nos. 2,448,130,56 Mar-10 Jul-10 BVIL
BHEL 1 X 500MW UNIT#6 UKAI TPS
CPU SERVICE VESSEL ---------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 3150Ø X 50 25000KG 2Nos. Jul-11 11-Mar BHEL
BCPL POLYPROPLYLENE CLOSED BLOW DOWN DRUM ----------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2000Ø X 16 8160KG 1Nos. 8,82,000 Aug-10 Mar-11 EIL
BGR ADANI POWER PRE FILTER ----------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1700Ø X 32 7300KG 08Nos. 4,411,500,00 Aug-11 Jun-12 BGR-ADANI
GNFC 120 TDI GNFC TDI PLANT BDG 340.DEP.376
NHP EMERGENCY STORGE VESSEL ---------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2900Ø X 42 40018KG 2Nos. Mar-10 Jan-11 LLOY'D
REGISTER
AQUATECH AE-1021 PRESSURE SAND FILTER ----------- ASME IS 2062 GR.B SA 516 GR.70 SA 106 GR.B SA 105 3000Ø X 10 6Nos. 7,911,950.00 AQUATECH
BCPL-EIL BRAHMAPUTRA PETROCHEM PROJECT
CLOSDE BLOW DOWN DRUM ------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2000Ø X 16 860KG 1Nos 80,000,00 Aug-10 Juy-11 EIL
BCPL-EIL BRAHMAPUTRA PETROCHEM PROJECT PHASE SEPRATOR ------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1800Ø X 12 12710KG 1Nos 60,000,00 Juy-10 Juy-11 EIL
BCPL-EIL BRAHMAPUTRA PETROCHEM PROJECT
FUEL GAS KNOCK OUT DRUM -------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 900Ø X 10 1500KG 1Nos 40,000,00 Nov-10 Jun-11 EIL
BCPL-EIL BRAHMAPUTRA PETROCHEM PROJECT
PRESSURE VESSLE ------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1200Ø X 6 1200KG 1Nos. 60,000,00 Aug-10 Air-11 EIL
MRPL MRPL PHASE III REFINERY PROJECT
BLOWN DOWN VESSLE ------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2000Ø X 18 10995KG 2Nos. 27,12,000,00 May-10 Nov-10 EIL
NRL-EIL NRL WAX PROJECTPRIMARY FILTRATE ------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2400Ø X 20 80010KG 1Nos. --------- EIL
GAIL-EIL PETROCHEMICA COMPLEX-II VIJAYPUR DRAIN VESSSLE -------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2500Ø X 12 9500KG 1Nos. ----------- EIL
SRF011,FMP & P14 PLANT AT
SRF DAHEJ, P11 PLANT
LIGHT RECVERY COLUMN ------------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1800Ø X 12 51000KG 1Nos. 41,47,560.00 Aug-11 Jun-12 BVIL
SRF011,FMP & P14 PLANT AT
SRF DAHEJ, P11 PLANT
LIGHT COLUMN ------------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 1400Ø X 12 38000KG 1Nos. Fab-11 BVIL
SRF011,FMP & P14 PLANT AT
SRF DAHEJ, P11 PLANT
PRODUCT COLUMN ------------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 800Ø X 10 ------------- 1Nos. 16,50,000.00 Jun-11 Nev-11 BVIL
PI INDUSTRIES --------------- AIR RECEIVER ----------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2200Ø X 12 4800KG 1Nos. 1,246,755.00 Jun-11 Nev-11 PI
INDUSTRIES
ISHAN EQUIPMENTS PVT LTD
Date of SupplyClient Project Item Description Service
Metallurgu & Size
Empty WeightCode of
Construction (ASME,BS,IS etc)
Rolled Diameter &
Shell Thikness (mm)
SUPPLY OF PRESSURE VESSSLE IN RECENT PAST
Inspection AuthorityQty Value Contractual
Delivery Date
VATECH WABAG
CONDENSATE POLISHING UNIT
CONDENSATE POLISHING UNIT
(CPU) ------------ ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2800Ø X 10 15401KG 1Nos. 94,41,39.02 Arp-11 Nev-11 BVIL
VATECH WABAG
CONDENSATE POLISHING UNIT
ACTIVATED CARBON FILTER ----------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 4200Ø X 14 34432KG 1Nos. 19,57,242.32 Arp-11 Nev-11 BVIL
GFL ------------------- CHLOROFORM FEED TANK ---------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 2100Ø X 14 975KG 1Nos. 2,432,45.00 May-11 Jan-12 BVIL
GFL -------------------- HEAVIES ORGANIC RECYCLE TANK ----------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 3000Ø X 18 ------------ 1Nos. 2,432,45.00 May-11 Jan-12 BVIL
VATECH WABAG
CONDENSATE POLISHING UNIT
TRECONDENSET SURGE TANK ------------- ASME SA 516 GR.70 SA 516 GR.70 SA 106 GR.B SA 105 4100Ø X 08 8200KG 1Nos. 2,10,783.30 Jun-11 Fab-11 BVIL
PRE‐QUALIFICATION
Ishan shall be world class technology driven & progressive company, Ishan shall be world class technology driven & progressive company, committed to total customer satisfactioncommitted to total customer satisfactioncommitted to total customer satisfactioncommitted to total customer satisfaction
Jayanti Panchal(Director – Tech)
Correspondence Address :404‐405 Ranoli GIDC Industrial Estate,B/h, L&T Ranoli, At Ranoli ‐ 391 350,Dist Vadodara Gujarat India (Director Tech)
+91 98250 [email protected]
Dist :‐ Vadodara‐ Gujarat – IndiaPhone :‐ 0265 – 2308589,Fax :‐ 0265 – [email protected]/ [email protected]://www.ishanequipments.com
42Page