-
ICS 77.140.25; 77.140.65
Stahldraht fr Federn Teil 3: Nicht rostender Federstahldraht
European Standard EN 10270-3 : 2001 has the status of a DIN
Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by ECISS/TC 30
Steel wires (Secretariat: Belgium).The responsible German body
involved in its preparation was the Normenausschuss Eisen und Stahl
(Steeland Iron Standards Committee).
AmendmentsParts of DIN 17224, February 1982 edition, have been
superseded by the specifications of EN 10270-3.
Previous editionsDIN 17224: 1955-04, 1968-07, 1982-02.
Ref. No. DIN EN 10270-3 : 2001-08English price group 10 Sales
No. 1110
12.01
DEUTSCHE NORM August 2001
EN 10270-3{
Continued overleaf.EN comprises 21 pages.
No part of this standard may be reproduced without the prior
permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth
Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale
for German Standards (DIN-Normen).
Steel wire for mechanical springsPart 3: Stainless spring steel
wireEnglish version of DIN EN 10270-3
Supersedes parts of DIN 17224,February 1982 edition.
-
English version
ICS 77.140.25; 77.140.65
Descriptors:
Steel wire for mechanical springsPart 3: Stainless spring steel
wire
2001. CEN All rights of exploitation in any form and by any
meansreserved worldwide for CEN national members.
Ref. No. EN 10270-3 : 2001 E
Stahldraht fr Federn Teil 3: Nichtrostender Federstahldraht
This European Standard was approved by CEN on 2001-02-19.CEN
members are bound to comply with the CEN/CENELEC Internal
Regulationswhich stipulate the conditions for giving this European
Standard the status of anational standard without any
alteration.Up-to-date lists and bibliographical references
concerning such national stand-ards may be obtained on application
to the Management Centre or to anyCEN member.The European Standards
exist in three official versions (English, French, German).A
version in any other language made by translation under the
responsibility of aCEN member into its own language and notified to
the Management Centre hasthe same status as the official
versions.CEN members are the national standards bodies of Austria,
Belgium, the CzechRepublic, Denmark, Finland, France, Germany,
Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland,and the United
Kingdom.
EN 10270-3
April 2001
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComit Europen de
NormalisationEuropisches Komitee fr Normung
|
Fils en acier pour ressortsmcaniques Partie 3: Fils enacier
inoxydable
-
Page 2EN 10270-3 : 2001
2
3
3
4
4
4445577899
10
111111131314
14
15
20
21
-
Page 3EN 10270-3 : 2001
-
Page 4EN 10270-3 : 2001
-
Page 5EN 10270-3 : 2001
-
Page 6EN 10270-3 : 2001
-
Page 7EN 10270-3 : 2001
-
Page 8EN 10270-3 : 2001
-
Page 9EN 10270-3 : 2001
-
Page 10EN 10270-3 : 2001
-
Page 11EN 10270-3 : 2001
-
Page 12EN 10270-3 : 2001
-
Page 13EN 10270-3 : 2001
-
Page 14EN 10270-3 : 2001
-
Page 15EN 10270-3 : 2001
-
Page 16EN 10270-3 : 2001
-
Page 17EN 10270-3 : 2001
-
Page 18EN 10270-3 : 2001
-
Page 19EN 10270-3 : 2001
-
Page 20EN 10270-3 : 2001
-
Page 21EN 10270-3 : 2001
Beuth Verlag GmbH2002-01-24T08:14:37+010012163 BerlinDIN
Deutsches Institut fuer Normung e. V.Dokument ist zertifiziert
