Cat.NO. Kk122
NK. SLIDER Suitable for 10Kg to 60Kg door weight
NSC-C W 60V-22
NSC-C : Sliding closer spring typeDSC-C : Sliding closer rail inclined type
Rail length 22 : 2.2M, 31 : 3.1M
model CV-series
DSC-C : Sliding closer rail inclined type
NSC-C : Sliding closer spring type
green procurement
JQA-EM4057NITTO KOHKI Co,.LTD.Headquarters/Research Center
Hinge Division
ISO 14001
ISO9001SHIRAKAWA NITTO KOHKI Co,.LTD.
Compact size. Minimum in-frame dimension more than 110mm × 58mm (for NSC series), and 130mm × 58mm (for DSC series) Easy installation. All work for frame side is drilling screw hole only.You can install by driver only. Control rack set is installed at T-groove on Rail.This control rack set is replaceable for your easy maintenance (PAT.P).
Common use for right hand, and left hand. Primary door opening torque is very light (Less than 15N).Aged people, children, handicapped people can open door easily.
Brake is fluid friction mechanism. One way clutch achieved accurate, small, and long product life.
Feature
1
2
3
4
5
6
Max Door weight 30 : 30Kgs, 60 : 60kgs
Blank : For steel doorW : For wooden door
Installation diagrams
Specification
Unit:mm
ModelRail inclined type Spring type
ApplicableDoor
Weight
Width
Max stroke
Brake unit
Spring type
Minimum in frame dimension
Rail length
Closing drive system
Controlling system
Closing direction
Initial opening force
Endurance
DSC-C30V-22DSC-CW30V-22
DSC-C30V-31DSC-CW30V-31
DSC-C60V-22DSC-CW60V-22
DSC-C60V-31DSC-CW60V-31
NSC-C60V-22NSC-CW60V-22
NSC-C60V-31 NSC-CW60V-31
10~30kg 30~60kg
Less than 1500mm
10~60kg
600-1,200mm 1,200-1,600mm600-1,200mm 1,200-1,600mm600-1,200mm 1,200-1,600mm
SC-C03V SC-C06V
PS-04
110mm (H) × 58mm (D)
Spiral spring
SC-C06V
3.1M2.2M3.1M2.2M3.1M2.2M
-
130mm (H) × 58mm (D)
Rail inclination (3.5/300)
NSC-CW60V
A+111 138A (Cut-in)
DW(600~1600)
111138
75 Rail length L=W-150 75
Inner width of sash W
B+3215
11.5
(R溝部)
B(Chink-in frame)
Door stroke(1500 or less)
Door back endDoor front end
55
52.4
10
125
Adjustment (300mm or less)
125Equally divided at pitch 300
10
55
Right handed opening
Right handed opening
Position of rail mounting hole (As viewed from maintenance panel)
54.6(Door stopper)
54.6(Door stopper)
B(Chink-in frame)
PS-04R
55
52.4
1030
DH
10 Minimum in frame dimension
110 or more
Minimum in frame dimension
110 or more
H
Minimum in frame dimension58 or more
Minimum in frame dimension58 or more
3030
21
※If steel, tap hole M5 P=0.8
※This diagram is right handed opening type Common use for right hand, and left hand. (As viewed from maintenance panel)
Fluid friction resistance type
Common
Less than 15N
500,000 times open/close
This catalog is printed using environmentally friendly paper and vegetable oil inks.
DISTRIBUTED BY
Printed in Japan 11FX002- 1
NITTO KOHKI CO.,LTD.
Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791
URL : www.nitto-kohki.co.jp/eE-mail : [email protected]
Specifications and designs are subject to change at any time without notice.