Date post: | 31-Jul-2015 |
Category: |
Technology |
Upload: | saia-burgess-controls-ag |
View: | 336 times |
Download: | 1 times |
Operator: Helmut Kreutz GmbHObject: GrinderCountry: Germany
DIN ISO 50001 certification with S-Monitoring
2 SBC Reference | www.saia-pcd.com
Helmut Kreutz GmbH
Brief description
The Helmut Kreutz GmbH, which is based in Haier-Langenaubach (D), is active in the fields of raw material processing and manufacturing of oxide ceramics.
Since 1995, the company has been a leader in the field of non-ferrous contract grinding and processing of mineral raw materials.
The company operates its own mine, a mixing plant and a grinder for ceramic and special clays.
Non-ferrous grinding of hard materials, such as zirconium silicate, aluminium oxide, quartz, corundum, rutile, ilmenite and ceramic frits.
Kreutz GmbH manufactures molded bricks and mosaic tiles for mills, funnels and pipes.
3 SBC Reference | www.saia-pcd.com
Energy savings with ISO 50001 certification
Initial situation The manufacturing process requires a high use
of energy. ISO certification 50001 should be introduced Since 2013, a proof that the company saves
energy has been required.
Challenge
A system is required that, visualizes consumption data transparently can be installed by own employees can be extended flexibly
Certification Successful ISO certification on 1.7.2012
Compressor for compressed-air
Interior view of distribution box
One of several company-owned transformer stations
4 SBC Reference | www.saia-pcd.com
Identification of the largest energy consumers
Installation
In order to determine the energy consumption, the S-Energy system of SBC will be installed:
Data acquisition via 40 S-Bus energy meters Acquisition of main distribution via pulse counter,
connection via PCD7.H104SE modules Data evaluation and visualization via 10“ Energy Manager
Panel Transfer of data to Siemens controller via MPI
Connection pulse counter via PCD7.H104SE Gateway
Data management via Siemens controller
Interior view of distribution box with SBC energy meters
5 SBC Reference | www.saia-pcd.com
Transparent illustration of consumption values
Extension The energy consumption is illustrated transparently via
a 10“ Energy Manager Panel Employees access the visualization on the panel with
their PC via the company network
Management level The data out of the Siemens controller are displayed
and analyzed via the management level.
Demonstration on Touch-Panel or directly via Browser
Illustration of the energy consumption in the management software
6 SBC Reference | www.saia-pcd.com
Extension from S-Energy to S-Monitoring
Extension Increasing requirements force the operator to extend the system. Connection of additional meters via pulse, Profibus and M-Bus Installation of PCD3.M5560 with S-Monitoring App. The Energy Manager will still be
used as a web panel and accesses the visualization in the PCD3 controller
Current installation
Ethernet
S-Bus
Log Data
Planned installation
S-Bus
MPI
M-Bus
7 SBC Reference | www.saia-pcd.com
This is what the user says about the SBC system
The manager of the electrical workshop, did the installation himself.
Previously, we had only half-hearted actions without any proof!
The requirements are constantly increasing. In the beginning it was not exactly clear, what is really needed. Great that S-Energy is flexible and extendible!
Only due to the installed meters, we became aware of the energy demand!
DIN ISO 50001 certification; Proof due to S-Energy