of 23
8/14/2019 Iso Standard Cylinders
1/23
Products & Services
Price follows function
8/14/2019 Iso Standard Cylinders
2/23
2 3
Festo presents you with a highly attractive proposal in standard pneumatics.
After an initial analysis of the current core functions, our Research and Development team
made a commitment A single objective: optimised functions at a better price.
Savings potential from:
Innovative design methods
New manufacturing processes
Reduced number of components
Alternative materials and reduced usage of materials
Improved packaging and logistics concepts
Festo passes potential savings directly on to you! Without compromise where
product quality is concerned and always with additional services.
Examine our offers and benefit from price advantages!
and that means price advantages for you!
Price follows function
8/14/2019 Iso Standard Cylinders
3/23
8/14/2019 Iso Standard Cylinders
4/23
Price follows function
Standard cylinders ADNP
New economy in the compact class:
Standard cylinder ADNP
Its compact design allows for use even in the
tightest installation space. Its extremely
suitable for attachment to moving machine
parts thanks to its minimal weight.
Optimised functions Emphasis on standards Changed material: polymer instead of aluminium
Standard cylinder ADNP: Price follows function
Less expensive and lighter materials, multiple usage
of functional modules from other cylinder ranges,
integrated fittings and combination with accessories
from the price follows function portfolio facilitates
pricing which is more than just attractive.
Technische Daten
Standard diameter 20 ... 50 mm
Standard strokes 5 80 mm
Force (advance) ... 1178 N
Force (return) ... 1057 N
Standardised!
Dimensions in accordance
with ISO 21287 for easy, fast
replacement and multiple
use of the same attachments.
Economical!
Best value for money thanks to
the most up-to-date materials
and technologies, for example
the patented 3-component
piston.
Compact!
Up to 50% less fitting space
compared to large, ISO 15552
standard cylinders. More
space in your installation!
Easy to fit!
Integrated QS push-in fittings
and extensive mounting
accessories from the standard
attachment range, for quick
and simple mounting!
Simple!
Integrated push-in fittings
that are ideally matched to the
cylinder reduce ordering,
logistics and installation costs.
Faster deployment*!
The ISO standard cylinder ADNP
and its accessories can be deli-
vered to you in less than 24
hours. A specially configured
variant of the ISO standard
cylinder can be delivered to
you in less than one week.
Our stated goal: high product
availability to accelerate your
procurement processes.
6 7
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/adnp. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
5/23
Price follows function
DSNUP ISO standard cylinder
Simply low cost the new family of round cylinders to ISO 6432
with aluminium cylinder barrel and polymer end caps
Available in sizes 16/20/25 with swivel mounting in the end cap.
The best choice for simple automation tasks such as deflector and
flap control systems or simple clamping and holding functions.
ISO Standard Lighter and less expensive materials Long service life
DSNUP ISO standard cylinder: Price follows function
Lighter and less expensive materials, common use of mounting
accessories from other cylinder series and combination with
flow control valves, fittings, hoses and from the Price FollowsFunction portfolio mean a price that is more than just attractive.
Technical data
Standard diameter 16, 20, 25 mm
Standard strokes 25, 50, 100 mm
Force (advance) ... 297 N
Force (return) ... 249 N
Standardised
Dimensions to ISO 6432 for
fast, easy replacement. Particu-
larly economical: Common use
of the same mounting accesso-
ries from the comprehensive
DSNU standard mounting fami-
ly.
Inexpensive
The latest materials such as
high-performance polymers andstate-of-the-art manufacturing
methods guarantee the highest
degree of quality and reliability
at an extremely attractive price.
Standard proximity sensors
SM..-8 reduce the expense of
ordering, logistics and assem-
bly.
Light and resistant
Its high chemical stability and
low weight make it flexible and
suited to many applications in
the food & packaging, textiles,
wood, plastics, machine tools,
building engineering, climate
control, agricultural and mobile
technology sectors.
Faster deployment!*
The ISO standard cylinderDSNUP and its accessories can
be delivered to you from stock
in less than 24 hours. If you
require an individual stroke
length, then you will receive the
cylinder manufactured specially
to suit your needs in less than
one week.
8 9
* You can find the exact standard delivery times for each part num-
ber in the compact catalogue or the Internet at
www.festo.com/de/dsnup. The delivery times mentioned refer
only to Europe and are subject to a minimum order quantity.
Available as a standard product from the fourth quarter of 2007.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
6/23
8/14/2019 Iso Standard Cylinders
7/23
Price follows function
Rodless drive unit DGC
Accurate, and with high load capacity the new generation
of rodless cylinders DGC
The new standard for precision, guide reliability and load
capacity. And almost entirely leak-proof thanks to a newly
developed sealing principle. Including outstanding value
for the money!
Long service life Integrated guide rail Access to all control elements from one side
Rodless drive unit DGC: Price follows function
Innovative design and manufacturing processes,
as well as a nearly leak-proof sealing system,
not only reduced procurement costs, but rathermaintenance costs for the drive as well
Technical data
Sizes 8 to 40 mm
Stroke lengths 1 to 5000 mm
(longer upon request)
Torque up to 380 Nm
Forces at the slide up to 6890 N
Products on offer
DGC 8 - 40, the new rodless
drive as a basic unit, with plain-
bearing guide or recirculating
ball bearing guide, optionally
with shock absorber and a se-
cond slide. Common to all:
improved guide qualities, high
characteristic load values and
torque resistance.
Easiest possible handling andinstallation
Precision end-position adjust-
ment, sensors, mounting, air
connections and pneumatic
end-position cushioning are all
accessible from one side, and
the shock absorbers are inte-
grated into the cap.
Optimised mounting options
Sturdy and accurate profile
mounting: The drive doesnt
have to be readjusted if it
should require replacement.
Compact machines with
improved performance
Thanks to minimised installa-
tion space and the use of
proximity sensors which are
integrated into the profile.
Precision mounting interfaces
through the use of centring
rings on the slide made of
polished stainless steel and
end caps with integrated
shock absorber retainers.
Reliable
Reduced maintenance costs
and less downtime: service
exceeds 25,000 km.
Faster in your system*
Your individually configured
DGC rodless drive unit, together
with its accessories, can be de-
livered to you in less than one
week.
12 13
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/dgc. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
8/23
Price follows function
SMT-/SME-8M proximity switch
SMT-/SME-8M modular system for proximity sensors
With its new SM..-8M modular system for proximity sensors,
Festo is putting things together that belong together! A broad
range of drives with new dimensions in safety and economy.
Fast and easy installation Universal use on all Festo drives
SMT-/SME-8M proximity switch: Price follows function
With its new SM 8 M proximity sensors, Festo is consistently
carrying through its tradition of the one for all cylinder
sensor. New: A freely selectable cable length, adapted cablequalities and optimised mounting improve your process
reliability and productivity.
Technical data
O perating voltage range 5 .. . 30 V AC/DC
Rated o perating current 1 00 mA / 5 00 mA
Max. switching capacity DC 3 W / 10 W
Operating temperature range -20 to +70 C
Versatile
Fully compatible with all Festo
drives with T-slot, as well as
round and tie-rod cylinders with
corresponding mounting kits.
Systematically more
economical
Maximum range of applications
thanks to free configuration of
cable lengths, cable quality and
connector technology. In-housesensor manufacturing ensures
system competence and a high-
ly varied product range: whet-
her heat resistant, welding field
immune, ATEX or 230 V
Festos proximity sensors leave
nothing to be desired.
Flexible
Unrestricted selection of
cable lengths makes coupling
cables unnecessary even for
chain link trunking and robot
applications.
Safety throughout
The sturdy central mounting
ensures secure screw-fastening
of the sensor into the slot
even in critical applications
over long periods of time.
Graduated cable qualities (stan-
dard, chain link trunking and
robotics) facilitate maximised
reliability and process safety,
right on up to the controller.
Faster deployment*!
The SME/SMT-8M proximity
sensor and its accessories can
be delivered to you in less than
24 hours. A specially configured
variant from the proximity
switch product family can be
delivered to you in less than
one week.
14 15
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/smt. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
Individual connection lines
8/14/2019 Iso Standard Cylinders
9/23
Price follows function
One-way flow control valve GRLA
One-way flow control valves GRLA-QS-B-20
Simplified warehousing, optimised handling and less
packaging waste by using bulk packs.
To put it briefly: The new bulk packs for one-way flow
control valves save time and money in XXL format with
maximum reliability!
Bulk packs Revised material: Polymer instead of metal Reduced loss: Captive seal
One-way flow control valve GRLA-QS: Price follows function
Doubly advantageous: inexpensive GRLA one-way flow
control valves in bulk pack variant. You not only profit
from the price, but rather from the logistics concept andavailability as well and all of this with Festos proven
standards of quality!
Technical data
Tubing connection QS 6 and 8
Thread G1/8, G 1/4
More inside
The use of bulk packs (20 pcs.)
increases economy and saves
handling time and costs in the
logistics process.
Theres simply more to it
For example the time tested
Quick Star release concept,
sturdy materials, captive seals
and a connection that can befreely rotated 360.
Accustomed Festo quality for
Festo plug and work.
Functional
One-way flow control valves
are required for regulating flow
rates at cylinders for advance
and return strokes. This makes
it possible to influence piston
speed. GRLA-QS-B-20 one-way
flow control valves facilitate
precision adjustment of flow
rates, and have proven their
worth again and again.
Faster deployment*!
The GRLA-QS one-way flow
control valve can be delivered
to you in less than 24 hours.
16 17
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/grla. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
10/23
Price follows function
Valve series VB
Highly economical and universal use: the performance
optimised VB valve range
From individual valves to valve terminals outstanding
flexibility and easiest possible handling. Including
outstanding value for the money and a long service life.
Reduced number of components Reduction in switching functions Material modification: Polymer instead of aluminium
Valve series VB: Price follows function
At home in all traditional fields of valve technology: the performance
optimised VB valve range. Lighter thanks to its polymer housing,
faster to install thanks to integrated QS push-in connectors and onlya single fixing screw, more flexible thanks to the modular system.
Whether individual valves or valve terminals are required the price
is just as convincing as the function!
Technical data
Valve sizes QS 4, 6, 8 , 10
Operating voltage 12 V DC, 24 V DC,
24 V AC , 110 V AC, 230 V AC
Flow rates 200, 500, 800, 1000 l/min.
Valve functions 3/ 2, 4/ 2
Economical
An optimised range of features
and a broad spectrum of
graduated flow rates from 200
to 1,000 litres per minute.
Integrated QS push-in connec-
tors for quick and reliable
installation. Available as
separate components, or as
fully assembled and tested
units.
Easy handling
Quick and reliable assembly:
Just one screw, and the valve is
secured to the manifold rail.
Integrated: an LED signal
indicator on the multi-pin valve
terminal. Easy conversion of
cartridge push-in connections.
Sturdy wall or H-rail mounting.
Flexible!
From individual valves or
valve manifolds with durable
metal manifold rail, right
through to multi-pin terminals
or modular systems for custo-
mised configuration!
Sturdy and lightweight
Ensured by the polymer housing
and the weight-optimised metal
manifold rail.
Faster deployment*!
The most popular variants
of individual valves can be de-
livered to you in less than
24 hours. Specially populated
valve terminals can be delivered
to you in less than one week.
18 19
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/vuvb. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
11/23
8/14/2019 Iso Standard Cylinders
12/23
8/14/2019 Iso Standard Cylinders
13/23
Price follows function
Service units, D series, polymer
Service units, D series, polymer
Well suited to core functions in the area of compressed
air preparation. Reliable compressed air preparation in proven
Festo quality for applications in non-critical environments.
The ideal introductory series to the world of modern compressed
air supply. Also upgradeable, because it can be freely combined
with components from Festos D series, metal.
Polymer instead of zinc/aluminium 3 instead of 8 port sizes Focus on core functions
Service units, D series, polymer: Price follows function
Simple tasks necessitate pragmatic solutions. Thanks to the
use of polymers and concentration on core functions, these
service units provide a high quality and economical alternative
to products offered by other suppliers. And of course theyre
fully compatible with the function-specific modules included
in the D series, metal.
Technical data
Connection sizes 1/8, 1/4 (3/8 via connecting plates)
Flow rate max. 1300 l/min (pressure regulator)
Working pressure up to 7 bar
Filter grade 40/5 _m
Ambient temperature -5 to +50 C
Economical
This product range focuses
on the core functions of
compressed air preparation
wherever reduced functionality
needs to be united with proven
quality. Including outstanding
value for the money!
Combinable!
The functionality of the service
units can be expanded at
any time thanks to compatibility
with the metallic D series.
Faster availability!
Ready for use at the customers
facility in no time flat short
delivery times and reliable
shipment, because all of the
service units are available ex
stock. Also included: increased
reliability, because theyre
pre-assembled and tested at
the factory.
Faster deployment*!
Thanks to very short delivery
times. You will receive process-
reliable, pre-fitted and factory-
tested service units from series
D, polymer, from stocks. Just
install it for optimal compressed
air.
24 25
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue. The delivery times mentioned refer
only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
14/23
Price follows function
Pressure switch SDE5
Pressure controller quick and easy pressure monitoring
Impressive miniature pressure switch for local pressure sensing.
Perfect for recording supply and vacuum pressure.
Quick installation with minimum downtime Pressure switch SDE5 Simple teach-in
Pressure switch SDE5: Price follows function
The miniature pressure switch is an inexpensive alternative for
quick and easy sensing of local pressure or vacuum.
Technical data
Pressure ranges -1 10bar
Electrical connections for M8 plug or
2.5 m open-ended cable
Electrical outputs 1 switching output PNP
Pneumatic connections for QS3, QS4 or QS6 connections
at one or both ends
Switching function N/C contact or N/O contact
Threshold value, hysteresis, fixed
or freely programmable window
comparator
The monitoring expert in
a compressed air system
This intelligent, configurable
pressure switch is easy to
install and safe.
Shortest installation times
Due to built-in QS connections,
at one or both ends M8 plug
connector or open-ended cable
and dovetailing wall bracket
Highly flexible
Thanks to selectable output
functions such as a threshold,
hysteresis or window compara-
tor.
Very quick and reliable thres-
hold setting
At the touch of a button by
simple teach-in.
High operational safety
Thanks to durable piezoresisti-
ve pressure sensor technology,
clearly visible LED, and com-
pact, sturdy design.
Faster deployment!*
The pressure switch SDE5 and
its accessories can be delivered
to you in less than 24 hours.
A specially configured variant
from the SDE pressure switch
family can be delivered to you
in less than a week.
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/sde5. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
26 27
8/14/2019 Iso Standard Cylinders
15/23
Technical data
Pressure ranges -110bar
Electrical connections for M8 or M12 plug
Electrical outputs 1 switch PNP or NPN
2 switches PNP or NPN
1 switch PNPor NPN and
0...10V analogue
1 switch PNPor NPN and
4...20mA analogue
Pneumatic connections R1/8" , R1/4" , MS4/6
Direct attachment to service units
in the MS4/MS6 series G1/8",
QS4 connections
Price follows function
Pressure switch SDE1
More precise permanent pressure control
Intelligent pressure sensor with freely programmable hysteresis/
comparator mode, for relative or differential pressure. Precise
measurement even at small pressures
Versatile mounting options Large, high-contrast LCD display Intuitive operation
Pressure switch SDE1: Price follows function
All pressure values are continuously under control with the SDE1
module for pressure measurement, pressure monitoring and pressure
sensing: For more productivity and faster system start-up.
Intelligent pressure measure-
ment
The SDE1 module an intelli-
gent pressure sensor with freely
programmable hysteresis-/
comparator mode. Can be se-
lected for relative or differential
pressure. For extra simple pro-
gramming at top speed.
Universal mounting
Just snap it in and the SDE1
module is quickly secured.
This is how to achieve short
installation times without the
need for any small parts.
Easy operation
With clearly visible LCD-Display
and clear 3-button menu: can
be put into operation quickly
and without the user manual.
High flexibility Thanks to the
M8 or M12 plug connector, the
SDE1 has a very versatile con-
nectivity.
Attractive offer
The impressive SDE1 has a
highly attractive price/perfor-
mance ratio.
Sturdy design
The design to IP65 enables it to
be used in harsh environment.
Faster deployment!*
The SDE1 pressure switch and
its accessories can be delivered
to you in less than 24 hours.
A specially configured variant of
the pressure switch can be deli-
vered to you in less than a week
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/sde1. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
28 29
8/14/2019 Iso Standard Cylinders
16/23
Price follows function
Tubing-Fitting-Combination PUN-E/QS-B: Price follows function
Tubing/fitting combination PUN-E/QS-B
Core functions for pneumatic installations at an attractive price:
PUN-E tubing and QS-B quick push-in threaded fittings.
This combination serves standard tasks with the most common
connections in the compact QS-B-Mini variant as well. An
ideal buy: the bulk pack. Available for volume buyers at attractive
bulk prices.
Reduced pressure and temperature ranges Reduced wall thickness Reduced variety: 176 variants
Tubing/fitting combination PUN-E/QS-B: Price follows function
Less expensive to manufacture thanks to focusing on
the specification of outside diameters and core tasks in the
areas of temperature and pressure: PUN-E. Even more
economical in combination with most common types of
corresponding QS-B fittings.
Technical data
Tubing diameters 4, 6, 8, 10 and 12 mm
Fitting types 176 variants
O perating pres sure -0 .95 to +10 bar ( PUN- E t o 8 bar)
(depending on temperature)
Operating temperature -35 to +50 C (PUN-E)
0 to +60 C (QS-B)
Reliable!
Vacuum-compatible and
halogen-free always
a reliable connection in
standard applications. This
is ensured by the nickel
plated brass design of the
threaded collar, as well as
the stainless steel retaining
claw used for the proven
quick connection principle.
Ideally matched to the
appropriate PUN-E tubing,
the QS-B represents yet
another reliable solution
from Festo.
PUN-E tubing: flexible!
Highly flexible PUN-E tubing
with optimised flow rates.
Even with very small bending
radii, facilitates highly flexible
tubing connections.
QS-B fitting: practical!
Fast and highly flexible
installation thanks to Festos
time-tested plug & work
principle!
Connected and fitted faster*
While others are still hanging
on to their tubing, you will
receive tubing and fittings in the
most convenient bulk amount in
less than 24 hours.
30 31
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue . The delivery times mentioned refer
only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
17/23
Price follows function
Tubing-Fitting-Combination PEN/QS-B: Price follows function
Tubing-Fitting-Combination PEN/QS-B for universal
use at an attractive price
Advanced technology assures lean prices. Thanks to
an innovative manufacturing process, the characteristics
of our inexpensive PEN tubing are almost as good
as those demonstrated by polyurethane tubing. Ideal in
combination with the QS-B range of fittings.
Revised material: Polyethylene instead of polyurethane Reduced return effect New, economic manufacturing processes
Tubing/fitting combination PEN/QS-B: Price follows function
PEN tubing, less expensive to manufacture thanks to new
polyethylene material, as well as reduced bending radii
for layouts. Even more economical in combination with
corresponding QS-B fittings. Ideal for use wherever your
requirements and service performance demands are
fulfilled by QS-B and PEN.
Technical data
Tubing OD 4, 6, 8, 10, 12 and 16 mm
Fitting types 176 variants
Operating pressure -0.95 to +10 bar
(depending on temperature)
Operating temperature -30 to + 60 C (PEN)
0 to +60 C (QS-B)
Core functions for a lean price
The use of polyethylene makes
PEN significantly less expensive
than comparable polyurethane
tubing. An additional advanta-
ge: The QS-B product range is
focused on the most important
core functions at an ideal price.
Multifunctional
Ideally suitable for all standard
applications with pressures of
up to 10 bar and temperatures
of up to 60. Resistant to
hydrolysis and the most com-
monly used cleaning agents.
Optimised installation
Thanks to a new manufacturing
process, PEN performs nearly
as well as polyurethane tubing.
Tight bending radii are also
possible with this polyethylene
tubing.
Connected and fitted faster*
While others are still hanging
on to their tubing, you will
receive tubing and fittings in
the most convenient bulk
amount in less than 24 hours.
32 33
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue . The delivery times mentioned refer
only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
8/14/2019 Iso Standard Cylinders
18/23
Price follows function
NEBU cable module
NEBU Variety that connects
The cable module offers unlimited permutations of connection
sockets, cable lengths, cable qualities and plugs. The cables
are optimally matched to all equipment with M8 and M12 plugs,
such as proximity sensors, position transmitters, flow sensors,
optical and inductive sensors, as well as pressure switches and
transmitters.
Flexible application Wide range of variants Reliability
NEBU cable module: Price follows function
The NEBU module for connecting cables offers considerable
reduction in costs and very high flexibility because of its freely
configurable line lengths and properties. In brief: the correct
cable for every application.
Maximum flexibility
Thanks to free configuration of
the plug and socket side, plus
standard types quickly available
from stocks.
Long service life
Thanks to application-specific
cable properties. Whether
standard, chain link trunking
or robot technology.
Available cable versions
Standard: Good oil resistance,
good flex properties, suitable
for chain link trunking.
For chain link trunking:
Very good oil resistance, very
good flex properties, highly
suitable for chain link trunking,
halogen-free.
For robots:
Very good oil resistance, very
good flex and torsion proper-
ties, suitable for chain link
trunking, halogen-free.
Wired faster*
Connecting and interconnecting
cables can be delivered to you
in less than 24 hours.
Customised cable sets from the
NEBU product family can be
delivered to you in less than a
week.
* You can find the exact standard delivery times for each part
number in the compact catalogue or the Internet at
www.festo.com/catalogue/nebu. The delivery times mentioned
refer only to Europe and are subject to a minimum order quantity.
Price-competitive, thanks to:
Technical data
Connection technology on the left M8 and M12 plugs
Socket design straight, angled or rotatable
Connection technology on the right M8, M12 plugs or
open-ended cable
Plug design straight or angled
Number of pins/wires 3-, 4- or 5-pin
Cable property standard, chain link trunkingor robot-compatible
Line lengths 0.1 m...25 m
34 35
8/14/2019 Iso Standard Cylinders
19/23
Laser scanning micro-
scopy/3D surface analysis
technique
Visualisation of 3D surface
structures allows us to
draw conclusions regard-
ing tribologically optimi-
sed sliding surfaces and
their manufacturing para-
meters.
Thus our components
provide you with a longer
service life as a result.
Scanning electron
microscopy
An examination of materi-
als and coatings leads to
the selection of mechani-
cally and technologically
optimised materials reli-
ability included.
TG-FTIR analysis
Analyses regarding resi-
stance to media which are
found in the areas where
products are utilised. This
allows Festo components
to keep their performance
promises, even under diffi-
cult conditions of use.
Guaranteed!
EMC laboratory
In-house measurements
ensure that requirements
set forth in international
directives are always fulfil-
led so that our products
are compatible with your
systems.
Sound measuring lab
Substantiation of adheren-
ce to legal stipulations and
reduced environmental
impact by means of
a targeted reduction of
noise levels ensuring
that our products are only
conspicuous as a result
of their quality.
36 37
Virtual engineering
Electronic simulation for
visualising new solutions
and checking them for
market relevance in a cost
optimised fashion!
Rapid prototyping
Tool-free parts manufactu-
ring accelerates the route
to continuous operation,
and thus reduces time-to-
market so that your
individualised solution is
ready faster.
State-of-the-art laser
technology/laser welding
for plastics
Economic production of
miniaturised components
is only made possible
through the use of the
most up-to-date connector
technologies, and your
costs are reduced as
a result.
X-ray inspection
Viewing the inner workings
of running components in
a non-destructive fashion
improves our understan-
ding of dynamic contact
and friction processes. And
this results in improved
product characteristics, as
well as process reliability.
Innovative processes ensure innovative solutions! Roughly 7% of our
turnover is invested in research and development. Result: 2800 patents
and approximately 100 new patent applications each year! With one sin-
gle goal: optimised products and comprehensive services. For even more
economy! For improved performance and reliability! So that youll be
able to continue procuring everything from a single, economical sour-
ce as a satisfied customer in the future as well!
Innovation quality
8/14/2019 Iso Standard Cylinders
20/23
38 39
Manufacturing quality Program quality
PrePack
Pre-assembled standard
components
Pre-assembled pneumatics
Pre-assembled solutions with
standard components
Your foundation: over 25,000 catalogue products with numerous variants
Subsystems
Pre-assembled solutions with
standard components
PreAssembly
Pre-fitted standard
components
The entire pneumatic and electric control chain all from
a single source and ideally matched to each other!
Based on this comprehensive range of components Festo
offers further solutions to create even more value.
Festo has improved manufacturing quality and thus minimised
throughput times, recombined and restructured manufacturing
sequences and, at the same time, maximised product quality.
And Festo passes the resulting savings directly on to the
customers in the spirit of the price follows function philosophy.
8/14/2019 Iso Standard Cylinders
21/23
Engineering
Practical, high precision tools:
3D CAD, layout, simulation,
sizing, optimisation,
configuring ...
Digital customer information
system
User-specific product and
system solutions
Supply chain
You have the European option:
24-hour delivery service for
stock products is standard
within the EU. Our express de-
livery service is perfect when
you have urgent requirements
for selected, individually con-
figured products. This service
provides express delivery
within 24 hours inside the EU.
Assembly
Easy assembly services:
saves you the trouble of
assembly, as well as time
and money.
PrePack service, PreAssembly
service, ready-to-install
pneumatics (one part number,
one order, one line item,
one delivery date, shipped
in a single package)
Installation and
commissioning
Operation
Hotline and on-site service
Replacement parts and wearing
parts service
Compressed air consumption
and compressed air quality
analysis
Energy saving service with
consumption and leakage
measurements
Customised solutions are created where enthusiasm for technology
and cooperative partnership come together. Thus service is provided
when the customer becomes the focus of attention. From enginee-
ring, procurement and assembly, right through to the initial commis-
sioning of your system:
Service quality
40 41
8/14/2019 Iso Standard Cylinders
22/23
42 43
8/14/2019 Iso Standard Cylinders
23/23