ISO Update · ISO/CD 22762-1 Elastomeric seismic-protection isolators — Part 1: Test methods...

ISO Update Supplement to ISOfocus

December 2015

ISO Update, Supplement to ISO Focus -- December 2015 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 November to 30 November 2015

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

PC 287 Chain of custody of wood and wood-based products

ISO/CD 38200 Chain of custody of wood and wood-based products — Requirements

TC 4 Rolling bearings

ISO/CD 492 Rolling bearings — Radial bearings — Geo-metrical product specifications (GPS) and toler-ance values

TC 12 Quantities and units

ISO/CD 80000-11

Quantities and units — Part 11: Characteristic numbers

TC 24 Particle characterization including sieving

ISO/CD 18747-1

Determination of the particle density by sedi-mentation methods — Part 1: Zero-velocity interpolation approach

TC 34 Food products

ISO/CD 7305 Milled cereal products — Determination of fat acidity

ISO/CD 2451 Cocoa beans — Specification and quality requirements

TC 35 Paints and varnishes

ISO/CD 11126-1

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification

ISO/CD 11126-3

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag

ISO/CD 11126-4

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag

ISO/CD 11126-5

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel refinery slag

ISO/CD 11126-6

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron furnace slag

ISO/CD 11126-7

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide

TC 45 Rubber and rubber products

ISO/CD 8307 Flexible cellular polymeric materials — Deter-mination of resilience by ball rebound

ISO/CD 22762-1

Elastomeric seismic-protection isolators — Part 1: Test methods

ISO/CD 22762-2

Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications

ISO/CD 22762-3

Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications

TC 70 Internal combustion engines

ISO/CD 8178-1 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

ISO/CD 8178-4 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/CD 13315-8

Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations of concrete

TC 92 Fire safety

ISO/CD 13943 Fire safety — Vocabulary

TC 94 Personal safety -- Protective clothing and equipment

ISO/CD 15384 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing

TC 105 Steel wire ropes

ISO/CD 3108 Steel wire ropes for general purposes — Deter-mination of actual breaking load

TC 107 Metallic and other inorganic coatings

ISO/CD 20274 Vitreous and porcelain enamels — Preparation of enamelled samples and determination of thermal expansion coefficient

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO/CD 13373-7

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generation and pump-storage plants

ISO/CD 20816-5

Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Ma-chine sets in hydraulic power generating and pump-storage plants

TC 122 Packaging

2 ISO Update, Supplement to ISO Focus -- December 2015

ISO/CD 20848-3

Packaging — Plastics drums — Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l

TC 126 Tobacco and tobacco products

ISO/CD 13276 Tobacco and tobacco products — Determina-tion of nicotine purity — Gravimetric method using tungstosilicic acid

TC 127 Earth-moving machinery

ISO 7131:2009/CD Amd 1

Earth-moving machinery — Loaders — Ter-minology and commercial specifications — Amendment 1

TC 134 Fertilizers and soil conditioners

ISO/CD 7409 Fertilizers — Marking — Presentation and declarations

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 11295 Classification and information on design and applications of plastics piping systems used for renovation and replacement

TC 145 Graphical symbols

ISO 7010:2011/CD Amd 188

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 188: Safety sign E021: Protection shelter

ISO 7010:2011/CD Amd 189

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 189: Safety sign P044: Use of smart glasses prohibited

TC 147 Water quality

ISO/CD 20595 Water quality — Determination of selected easily volatile organic compounds in water — Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)

TC 163 Thermal performance and energy use in the built environment

ISO/CD 20310 Thermal insulation — Aluminium silicate wool products — Specification

TC 165 Timber structures

ISO/CD 12122-6

Timber structures — Determination of charac-teristic valu — Part 6: Large components and assemblies

TC 206 Fine ceramics

ISO/CD 19618 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer

TC 215 Health informatics

ISO/CD 17117-1

Health informatics — Terminological resources — Part 1: Characteristics

TC 229 Nanotechnologies

ISO/DTS 11888

Nanotechnologies — Characterization of mul-tiwall carbon nanotubes — Mesoscopic shape factors

ISO/DTR 18637

Overview of available frameworks for the devel-opment of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAA)

TC 269 Railway applications

ISO/DTR 21245-1

Railway applications — Generic standards for rail project planning process — Part 1: Stake-holders and their needs/interests

ISO/DTR 21245-2

Railway applications — Generic standards for rail project planning process — Part 2: Conditions

JTC 1 Information technology

ISO/IEC PDTR 29125

Information technology — Telecommunications cabling requirements for remote powering of terminal equipment

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 277 Sustainable procurement

ISO/DIS 20400 * Sustainable procurement — Guidance

2016-02-13

TC 5 Ferrous metal pipes and metallic fittings

ISO/DIS 9349 * Preinsulated ductile iron pipeline systems

2016-02-20

(Revision of ISO 9349:2004)

TC 8 Ships and marine technology

ISO/DIS 19697 * Ships and marine technology — Navigation and ship operations — Electronic inclinometers

2016-02-20

(Revision of ISO/PAS 19697:2014)

TC 20 Aircraft and space vehicles

ISO/DIS 6858 * Aircraft — Ground support electrical supplies — General requirements

2016-02-27


ISO/DIS 20683-1

* Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 1: Main-line aircraft

2016-02-06

(Revision of ISO 20683-1:2005)

ISO/DIS 20683-2

* Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear — Part 2: Regional aircraft

2016-02-06


ISO/DIS 17666 * Space systems — Risk management

2016-02-20



TC 21 Equipment for fire protec-tion and fire fighting

ISO/DIS 8201 * Acoustics — Audible and other emergency evacuation signals

2016-02-20


TC 22 Road vehicles

ISO/DIS 16845-1

* Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signaling

2016-02-20



ISO/DIS 22412 Particle size analysis — Dynamic light scattering (DLS)

2016-02-06

(Revision of ISO 13321:1996, ISO 22412:2008)

TC 28 Petroleum products and re-lated products of synthetic or biological origin

ISO/DIS 19291 * Testing of lubricants — Tribologi-cal test in the translatory oscilla-tion apparatus — Determination of tribological quantities for oils and greases in the translatory oscillation apparatus

2016-02-06

TC 34 Food products

ISO 16654:2001/DAmd 1

* Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Escherichia coli O157 — Amend-ment 1: Annex B: Result of interlaboratory studies

2016-02-20


ISO/DIS 19403-1

* Paints and varnishes — Wettabil-ity — Part 1: Terminology and general principles

2016-02-13

ISO/DIS 19403-2

* Paints and varnishes — Wet-tability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle

2016-02-13

ISO/DIS 19403-3

* Paints and varnishes — Wet-tability — Part 3: Determination of the surface tension of liquids using the pendant drop method

2016-02-13

ISO/DIS 19403-4

* Paints and varnishes — Wet-tability — Part 4: Determination of the polar and dispersive frac-tions of the surface tension of liquids from an interfacial tension

2016-02-13

ISO/DIS 19403-5

* Paints and varnishes — Wet-tability — Part 5: Determina-tion of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy

2016-02-13

ISO/DIS 19403-6

* Paints and varnishes — Wetta-bility — Part 6: Measurement of dynamic contact angle

2016-02-13

ISO/DIS 19403-7

* Paints and varnishes — Wetta-bility — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)

2016-02-13

ISO/DIS 15741 * Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases

2016-02-20


TC 46 Information and documentation

ISO/DIS 17068 * Information and documentation - Trusted third party repository for digital records

2016-02-20

(Revision of ISO/TR 17068:2012)

TC 58 Gas cylinders

ISO 12209:2013/DAmd 1

* Gas cylinders — Outlet connec-tions for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder work-ing pressure of 500 bar

2016-02-06

ISO/DIS 19016 * Gas cylinders — Cylinders and tubes of composite construc-tion — Modal acoustic emis-sion (MAE) testing for periodic inspection and testing

2016-02-05

TC 61 Plastics

ISO/DIS 17880 * Cellular plastic — Self-support-ing metal faced sandwich panels — Complementary element

2016-02-13

TC 69 Applications of statistical methods

ISO/DIS 22514-5

* Statistical methods in process management — Capability and performance — Part 5: Pro-cess capability estimates and performance for attributive characteristics

2016-02-27

ISO 11843-5:2008/DAmd 1

* Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1

2016-02-06

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/DIS 9151.2

* Protective clothing against heat and flame — Determination of heat transmission on exposure to flame

2016-01-20


ISO/DIS 15025 * Protective clothing — Protection against flame — Method of test for limited flame spread

2016-02-06


ISO 20471:2013/DAmd 1

* High visibility clothing — Test methods and requirements — Amendment 1

2016-02-27

TC 108 Mechanical vibration, shock and condition monitoring

ISO 5344:2004/DAmd 1

* Electrodynamic vibration gen-erating systems — Performance characteristics — Amendment 1

2016-02-06


ISO 8626:1989/DAmd 1

* Servo-hydraulic test equipment for generating vibration — Method of describing character-istics — Amendment 1

2016-02-06

ISO 15261:2004/DAmd 1

* Vibration and shock generat-ing systems — Vocabulary — Amendment 1

2016-02-20

TC 113 Hydrometry

ISO/DIS 6420 * Hydrometry — Position fixing equipment for hydrometric boats

2016-02-20


TC 119 Powder metallurgy

ISO/DIS 3928 * Sintered metal materials, exclud-ing hardmetals — Fatigue test pieces

2016-02-06


TC 121 Anaesthetic and respiratory equipment

ISO/DIS 18562-1

* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process

2016-02-13

ISO/DIS 18562-2

* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter

2016-02-13

ISO/DIS 18562-3

* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 3: Tests for emissions of volatile organic compounds (VOCs)

2016-02-13

ISO/DIS 18562-4

* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate

2016-02-13

TC 130 Graphic technology

ISO/DIS 13655 * Graphic technology — Spectral measurement and colorimetric computation for graphic arts images

2016-02-27


ISO/DIS 17972-3

* Graphic technology — Colour data exchange format (CxF/X) — Part 3: Output target data (CxF/X-3)

2016-02-06

TC 131 Fluid power systems

ISO/DIS 15552 * Pneumatic fluid power — Cylin-ders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions

2016-02-20


TC 135 Non-destructive testing

ISO/DIS 20484 * Non-destructive testing — Leak testing - Vocabulary

2016-02-27

ISO/DIS 10880 * Non-destructive testing — In-frared thermographic testing — General principles

2016-02-20

ISO/DIS 18251-1

* Non-destructive testing — Infra-red thermography — System and equipment — Part 1: Description of characteristics

2016-02-06

TC 145 Graphical symbols

ISO/DIS 3864-2

* Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels

2016-02-06

(Revision of ISO 3864-2:2004, ISO 3864-2:2004/Amd 1:2011)

ISO 7010:2011/DAmd 182

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 182: Safety sign E025: Emergency hammer

2016-02-06

ISO 7010:2011/DAmd 183

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 183: Safety sign P040: Do not set off fireworks

2016-02-06

ISO 7010:2011/DAmd 184

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 184: Safety sign P041: No leaning against

2016-02-06

ISO 7010:2011/DAmd 185

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 185: Safety sign P042: No pregnant women allowed

2016-02-06

TC 159 Ergonomics

ISO/DIS 9241-11

* Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts

2016-02-20


TC 163 Thermal performance and energy use in the built environment

ISO/DIS 17772-1

* Energy performance of buildings — Indoor environmental Quality — Part 1: Indoor environmental input parameters for the design and assessment of energy per-formance of buildings

2016-05-04

TC 182 Geotechnics

ISO/DIS 22476-11

* Geotechnical investigation and testing — Field testing — Part 11: Flat dilatometer test

2016-02-20

(Revision of ISO/TS 22476-11:2005)

TC 190 Soil quality

ISO/DIS 18400-203

* Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites

2016-02-27

ISO/DIS 18504 * Soil quality — Guidance on sustainable remediation

2016-02-13

TC 194 Biological and clinical eval-uation of medical devices

ISO/DIS 10993-4

* Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood

2016-02-27



ISO/DIS 10993-11

* Biological evaluation of medical devices — Part 11: Tests for systemic toxicity

2016-02-06


TC 204 Intelligent transport systems

ISO/DIS 14823 * Intelligent transport systems — Graphic data dictionary

2016-02-06

(Revision of ISO/TS 14823:2008)


ISO/DIS 17561 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance

2016-02-27

(Revision of ISO 17561:2002, ISO 17561:2002/Cor 1:2007)

ISO/DIS 18071 * Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) — Determination of antiviral activity of semiconduct-ing photocatalytic materials under indoor lighting environ-ment — Test method usingbacteriophage Q-beta

2016-02-27

TC 219 Floor coverings

ISO/DIS 19322 * Resilient floor coverings — Specification for Floor cover-ings based on thermoplastic polymers

2016-02-27

TC 238 Solid biofuels

ISO/DIS 18125 * Solid biofuels — Determination of calorific value

2016-02-20

TC 260 Human resource management

ISO/DIS 30409 * Human resource management — Workforce planning

2016-02-27

TC 261 Additive manufacturing

ISO/ASTM DIS 52901

* Additive manufacturing — Gen-eral principles — Requirements for purchased AM parts

2016-02-06


ISO/IEC DIS 30140-1

* Underwater acoustic sensor network — Part 1: Overview and Requirements

2016-02-27

ISO/IEC DIS 29155-4

* Systems and software engineer-ing — Information technology project performance bench-marking framework — Part 4: Guidance for data collection and maintenance

2016-02-06

ISO/IEC DIS 18328-3

* Identification cards — ICC-man-aged devices — Part 3: Organi-zation, security and commands for interchange

2016-02-20

ISO/IEC DIS 18745-2.2

* Test methods for machine read-able travel documents (MRTD) and associated readers — Part 2: Test methods for the contact-less interface

2016-01-07

ISO/IEC DIS 24790

* Information technology — Office equipment — Measurement of image quality attributes for hard-copy output — Monochrome text and graphic images

2016-02-20

(Revision of ISO/IEC TS 24790:2012)

ISO/IEC 14496-10:2014/DAmd 2

* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2: Ad-ditional Levels and Supplemental Enhancement Information

2016-02-20

ISO/IEC DIS 14496-15

* Information technology — Cod-ing of audio-visual objects — Part 15: Carriage of NAL unit structured video in the ISO Base Media File Format

2016-02-06

(Revision of ISO/IEC 14496-15:2014, ISO/IEC 14496-15:2014/Cor 1:2015)

ISO/IEC DIS 23008-2

* Information technology — High efficiency coding and media de-livery in heterogeneous environ-ments — Part 2: High efficiency video coding

2016-02-20

(Revision of ISO/IEC 23008-2:2013/DAmd 2, ISO/IEC 23008-2:2015, ISO/IEC 23008-2:2015/Amd 1:2015)

ISO/IEC 23008-5:2015/DAmd 3

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: Refer-ence software for high efficiency video coding — Amendment 3: Reference software for scalable profiles

2016-02-06

ISO/IEC 23008-5:2015/DAmd 4

* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding — Amendment 4: Refer-ence software for 3D Main profile

2016-02-06

ISO/IEC 23008-8:2015/DAmd 2

* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 8: Conform-ance Specification for HEVC — Amendment 2: Improved HEVC Version 1 and Format Range Extensions Profiles Conformance Testing

2016-02-20

ISO/IEC 23008-8:2015/DAmd 3

* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 8: Conform-ance Specification for HEVC — Amendment 3: Conformance Testing for Scalable Profiles

2016-02-20

ISO/IEC 23009-1:2014/DAmd 3

* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 3: Authentication, MPD linking, Callback Event, Period Continu-ity and other Extensions

2016-02-13

ISO/IEC 19788-3:2011/DAmd 1

* Information technology — Learn-ing, education and training — Metadata for learning resources — Part 3: Basic application profile — Amendment 1

2016-02-20


ISO/IEC DIS 2382-37

* Information technology — Vo-cabulary — Part 37: Biometrics

2016-02-06

(Revision of ISO/IEC 2382-37:2012)

ISO/IEC DIS 30124

* Code of practice for the imple-mentation of a biometric system

2016-02-27

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 5 Ferrous metal pipes and metallic fittings

ISO/FDIS 16631

* Ductile iron pipes fittings, acces-sories and their joints compatible with plastic (PVC or PE) piping sytems, for water applications and for plastic pipeline connec-tions, repair and replacement

2016-01-03

TC 6 Paper, board and pulps

ISO/FDIS 4046-1

* Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

2016-01-16

ISO/FDIS 4046-2

* Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology

2016-01-16

ISO/FDIS 4046-3

* Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology

2016-01-16

ISO/FDIS 4046-4

* Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products

2016-01-16

ISO/FDIS 4046-5

* Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

2016-01-16

TC 17 Steel

ISO/FDIS 11949

* Cold-reduced tinmill products — Electrolytic tinplate

2016-01-04


ISO/FDIS 11950

* Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel

2016-01-04


ISO/FDIS 11951

* Cold-reduced tinmill products — Blackplate

2016-01-04


ISO/FDIS 5003 * Vignole railway rails 43 kg/m and above

2016-01-10



ISO/FDIS 3209 * Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambi-ent temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

2016-01-17


ISO/FDIS 9154 * Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification

2016-01-17


ISO/FDIS 9609 * Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient tempera-ture) /425 degrees C, 900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315 degrees C, 900 MPa (at ambient tempera-ture) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambi-ent temperature) /730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions

2016-01-04


ISO/FDIS 9618 * Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient tempera-ture)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient tempera-ture)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient tempera-ture)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 de-grees C — Dimensions

2016-01-17


ISO/FDIS 12289

* Aerospace — Rivets, solid, in corrosion-resisting steel — Pro-curement specification



ISO/FDIS 8278 * Aerospace series — Hydraulic, pressure compensated, vari-able delivery pumps — General requirements

2016-01-04

(Revision of ISO 12334:2000, ISO 8278:1986)

ISO/FDIS 17546

* Space systems — Lithium ion battery for space vehi-cles — Design and verification requirements

2016-01-17

ISO 27875:2010/FDAmd 1

* Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1

TC 22 Road vehicles

ISO/FDIS 6624-2

* Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron

2016-01-04


ISO/FDIS 6624-4

* Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel

2016-01-04


ISO/FDIS 3917 * Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

2016-01-04


IEC/FDIS 62752

* In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD)

2016-01-09

TC 23 Tractors and machinery for agriculture and forestry

ISO/FDIS 11001-1

* Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler

2016-01-18



ISO/FDIS 15901-1

* Evaluation of pore size distribu-tion and porosity of solid ma-terials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry

2016-01-04

(Revision of ISO 15901-1:2005, ISO 15901-1:2005/Cor 1:2007)

TC 28 Petroleum products and re-lated products of synthetic or biological origin

ISO/FDIS 22854

* Liquid petroleum products — Determination of hydrocar-bon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas chroma-tography method

2016-01-20


TC 29 Small tools

ISO/FDIS 10889-2

* Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs


ISO/FDIS 10889-3

* Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat


ISO/FDIS 10889-4

* Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat


ISO/FDIS 10889-5

* Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat


ISO/FDIS 10889-6

* Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat


ISO/FDIS 10889-7

* Tool holders with cylindrical shank — Part 7: Type F with taper seat


TC 34 Food products

ISO/FDIS 7304-1

* Durum wheat semolina and alimentary pasta — Assessment of cooking quality of alimentary pasta by sensory analysis — Part 1: Reference method

2016-01-11


ISO/FDIS 6579-1

* Microbiology of the food chain — Horizontal method for the detection, enumeration and serotyping of Salmonella — Part 1: Horizontal method for the detection of Salmonella spp.

2016-01-13

(Revision of ISO 6579:2002, ISO 6579:2002/Cor 1:2004, ISO 6579:2002/Amd 1:2007)

ISO/FDIS 6886 * Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test)

2016-01-13



ISO/FDIS 4624 * Paints and varnishes — Pull-off test for adhesion

2016-01-20


ISO/FDIS 7784-1

* Paints and varnishes — Determi-nation of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotat-ing test specimen

2016-01-27


ISO/FDIS 7784-2

* Paints and varnishes — Determi-nation of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

2016-01-27


ISO/FDIS 7784-3

* Paints and varnishes — Determi-nation of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

2016-01-27


TC 44 Welding and allied processes

ISO/FDIS 17916

* Safety of thermal cutting machines

2016-01-27

TC 58 Gas cylinders


ISO/FDIS 11119-4

* Gas cylinders — Refillable com-posite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners

2016-01-17

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 21809-3

* Petroleum and natural gas indus-tries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

2016-01-27


TC 68 Financial services

ISO/FDIS 9564-4

* Financial services — Personal Identification Number (PIN) man-agement and security — Part 4: Requirements for PIN handling in eCommerce for Payment Transactions

2016-01-24

(Revision of ISO/TR 9564-4:2004)


ISO/FDIS 7870-6

* Control charts — Part 6: EWMA control charts

2016-01-10


ISO/FDIS 4548-14

* Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings

2016-01-24

TC 84 Devices for administration of medicinal products and catheters

ISO/FDIS 8537 * Sterile single-use syringes, with or without needle, for insulin

2016-01-27


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/FDIS 16637

* Radiological protection — Moni-toring and internal dosimetry for staff members exposed to medi-cal radionuclides as unsealed sources

2016-01-17

TC 92 Fire safety

ISO/FDIS 9705-1

* Reaction to fire tests — Room corner test for wall and ceil-ing lining products — Part 1: Test method for a small room configuration

2016-01-17

(Revision of ISO 9705:1993, ISO 9705:1993/Cor 1:1993)

TC 106 Dentistry

ISO/FDIS 3950 * Dentistry — Designation system for teeth and areas of the oral cavity

2016-01-20


ISO/FDIS 18739

* Dentistry — Vocabulary of process chain for CAD/CAM systems

2016-01-20

TC 107 Metallic and other inorgan-ic coatings

ISO/FDIS 2178 * Non-magnetic coatings on mag-netic substrates — Measurement of coating thickness — Magnetic method

2016-01-27


ISO/FDIS 18535

* Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

2016-01-24

TC 130 Graphic technology

ISO/FDIS 16763

* Graphic technology — Post-press — Requirements for bound products

2016-01-24

TC 134 Fertilizers and soil conditioners

ISO/FDIS 18643

* Fertilizers and soil condition-ers — Determination of biuret content of urea-based fertilizers — HPLC method

2016-01-24

ISO/FDIS 18644

* Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements

2016-01-24

ISO/FDIS 18645

* Fertilizers and soil condition-ers — Water soluble compound fertilizer — General requirements

2016-01-24


ISO/FDIS 12707

* Non-destructive testing — Magnetic particle testing — Vocabulary

2016-01-06

TC 147 Water quality

ISO/FDIS 17943

* Water quality — Determination of volatile organic compounds in water — Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)

2016-01-13

ISO/FDIS 18635

* Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and elec-tron capture negative ionization (ECNI)

2016-01-20

ISO/FDIS 13165-3

* Water quality — Radium-226 — Part 3: Test method us-ing coprecipitation and gamma-spectrometry

2016-01-11

TC 172 Optics and photonics

ISO/FDIS 14490-3

* Optics and photonics — Test methods for telescopic sys-tems — Part 3: Test methods for telescopic sights

2016-01-17


TC 173 Assistive products for per-sons with disability


ISO/FDIS 19029

* Accessible design — Auditory guiding signals in public facilities

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO/FDIS 10378

* Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic ab-sorption spectrometric method

2016-01-24


TC 188 Small craft

ISO/FDIS 14895

* Small craft — Liquid-fuelled galley stoves and heating appliances

2016-01-27


ISO/FDIS 16315

* Small craft — Electric propulsion system

2016-01-20

TC 190 Soil quality

ISO/FDIS 18400-101

* Soil quality — Sampling — Part 101: Framework for the preparation and application of a sampling plan

2016-01-17

ISO/FDIS 18400-102

* Soil quality — Sampling — Part 102: Selection and application of sampling techniques

2016-01-17

ISO/FDIS 18400-103

* Soil quality — Sampling — Part 103: Safety

2016-01-17

ISO/FDIS 18400-105

* Soil quality — Sampling — Part 105: Packaging, transport, stor-age and preservation of samples

2016-01-17

ISO/FDIS 18400-106

* Soil quality — Sampling — Part 106: Quality control and quality assurance

2016-01-17

ISO/FDIS 18400-107

* Soil quality — Sampling — Part 107: Recording and reporting

2016-01-17

ISO/FDIS 18400-201

* Soil quality — Sampling — Part 201: Physical pretreatment in the field

2016-01-17

ISO/FDIS 17183

* Soil quality — Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation

2016-01-24

TC 198 Sterilization of health care products

ISO/FDIS 15883-7

* Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employ-ing chemical disinfection for non-invasive, non-critical ther-molabile medical devices and healthcare equipment (ISO/DIS 15883-7:2014)

2016-01-06

TC 201 Surface chemical analysis

ISO/FDIS 18554

* Surface chemical analysis — Electron spectroscopies — Proceedures for identify-ing, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-Ray photoelectron spectroscopy

2016-01-24


ISO/FDIS 14296

* Intelligent transport systems — Extension of map database specifications for applications of cooperative ITS

2016-01-17

TC 207 Environmental management

ISO/FDIS 14021

* Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)

2016-01-20

(Revision of ISO 14021:1999, ISO 14021:1999/Amd 1:2011)

TC 210 Quality management and corresponding general as-pects for medical devices

ISO/FDIS 16142-1

* Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential prin-ciples and additional specific es-sential principles for all non-IVD medical devices and guidance on the selection of standards

2016-01-17

ISO/FDIS 80369-6

* Small bore connectors for liquids and gases in healthcare applica-tions — Part 6: Connectors for neuraxial applications

2016-01-20

(Revision of ISO 594-1:1986, ISO 594-2:1998)

TC 218 Timber

ISO/FDIS 8903 * Broadleaved sawn timber — Nominal sizes

2016-01-18


TC 220 Cryogenic vessels

ISO/FDIS 24490

* Cryogenic vessels — Pumps for cryogenic service

2016-01-13



ISO/FDIS 17827-1

* Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above

2016-01-20

ISO/FDIS 17830

* Solid biofuels — Particle size distribution of disintegrated pellets

2016-01-20

TMBG Technical Management Board - groups

ISO/FDIS 80079-36

Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements

2016-01-17


ISO/FDIS 80079-37

Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protec-tion constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''

2016-01-17

ISO/IEC FDIS 80079-38

Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines

2016-01-17

ISO/IEC FDIS 80079-20-2

Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods

2016-01-17

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 19070

* Leather — Chemical determina-tion of N-methyl-2-pyrrolidone (NMP) in leather

2016-01-13

ISO/FDIS 19071

* Leather — Chemical tests — Determination of chromium (VI) and the reductive potential for chromium tanning agents

2016-01-13


ISO/IEC/IEEE FDIS 24748-4

* Systems and software engineer-ing — Life cycle management — Part 4: Systems engineering planning

2016-01-14

(Revision of ISO/IEC 26702:2007)

ISO/IEC FDIS 7816-6

* Identification cards — Inte-grated circuit cards — Part 6: Interindustry data elements for interchange

2016-01-26

(Revision of ISO/IEC 7816-6:2004, ISO/IEC 7816-6:2004/Cor 1:2006)


Information technology — JPEG 2000 image coding system: Core coding system — Part 1:

2016-01-17

(Revision of ISO/IEC 15444-1:2004, ISO/IEC 15444-1:2004/Amd 1:2006, ISO/IEC 15444-1:2004/Cor 1:2007, ISO/IEC 15444-1:2004/Cor 2:2008, ISO/IEC 15444-1:2004/Amd 2:2009, ISO/IEC 15444-1:2004/Amd 4:2013, ISO/IEC 15444-1:2004/Amd 3:2010, ISO/IEC 15444-1:2004/Amd 5:2013, ISO/IEC 15444-1:2004/Amd 6:2013, ISO/IEC 15444-1:2004/Amd 8:2015, ISO/IEC 15444-1:2004/Cor 3:2015, ISO/IEC 15444-1:2004/Cor 4:2015, ISO/IEC 15444-1:2004/Amd 7:2015)


* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 12: Image file format

2016-01-10


* Information technology — Ob-ject oriented BioAPI — Part 1: Architecture

2016-01-05


* Information technology — Object oriented BioAPI — Part 2: Java implementation

2016-01-05


* Information technology — Object oriented BioAPI — Part 3: C# implementation

2016-01-05

Standards published

New International Standards published between 01 November and 30 November 2015


** French version of standard previously published in English only

Price

group

REMCO Committee on reference materials

ISO Guide 31:2015

* Reference materials — Contents of certificates, labels and accompanying documentation

B

TC 2 Fasteners

ISO 2320:2015 Fasteners — Prevailing torque steel nuts — Functional properties

D

TC 4 Rolling bearings

ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan

D

ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values

C

TC 6 Paper, board and pulps

ISO/TR 10688:2015

* Paper, board and pulps — Basic terms and equations for optical properties

D

ISO 15360-2:2015

* Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method

C

ISO/TS 20460:2015

* Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges

C


ISO 15371:2015

* Ships and marine technology — Fire-extinguishing systems for protection of galley cooking equipment

E

ISO 484-1:2015

* Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m

C


ISO 484-2:2015

* Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive

C

TC 10 Technical product documentation

ISO 16792:2015

* Technical product documentation — Digital product definition data practices

H


ISO 18202:2015

* Space data and information transfer systems — Mission operations mes-sage abstraction layer

H

ISO 20618:2015

* Space data and information transfer systems — Spacecraft onboard inter-face services — Device enumeration service

F

ISO 22642:2015

* Space data and information transfer systems — TC synchronization and channel coding

F

ISO 16699:2015

* Space systems — Disposal of orbital launch stages

A

ISO 17761:2015

* Space environment (natural and artifi-cial) — Model of high energy radiation at low altitudes (300 km to 600 km)

A

ISO 18238:2015

* Space systems — Closed loop prob-lem solving management

C

TC 22 Road vehicles

ISO 17536-1:2015

* Road vehicles — Aerosol separator performance test for internal combus-tion engines — Part 1: General

D

ISO 17449:2015

* Road vehicles — Safety glazing materi-als — Test methods for properties of electrically heated glazing

B

ISO 6460-1:2007/Amd 1:2015

* Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements — Amendment 1

XZ

ISO 6460-3:2007/Amd 1:2015

* Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel con-sumption measurement at a constant speed — Amendment 1

XZ

ISO/TR 13062:2015

* Electric mopeds and motorcycles - Ter-minology and classification

C

ISO 18580:2015

* Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer

C

ISO/PAS 19695:2015

* Motorcycles — Functional safety

E

ISO 28981:2009/Amd 1:2015

* Mopeds - Methods for setting the run-ning resistance on a chassis dyna-mometer — Amendment 1

XZ

ISO 15500-1:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions

B

ISO 15500-7:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas injector

A

ISO 15500-8:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator

A

ISO 15500-10:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 10: Gas-flow adjuster

A

ISO 15500-11:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 11: Gas/air mixer

A

ISO 15500-12:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV)

A

ISO 15500-20:2015

* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel

A

TC 23 Tractors and machinery for agri-culture and forestry

ISO 22401:2015

Equipment for crop protection — Method for measurement of potential spray drift from horizontal boom spray-ers by the use of a test bench

B

TC 27 Solid mineral fuels

ISO 1953:2015 * Hard coal — Size analysis by sieving

C

TC 28 Petroleum products and related products of synthetic or biologi-cal origin

ISO 4263-3:2015

* Petroleum and related products — De-termination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids

D

TC 29 Small tools

ISO/TS 13399-203:2015

* Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replace-able inserts for drilling

C

ISO 5611-1:2015

Cartridges, type A, for indexable in-serts — Part 1: General survey, correla-tion and determination of dimensions

C

ISO 5611-2:2015

Cartridges, type A, for indexable inserts — Part 2: Style F

A

ISO 5611-3:2015

Cartridges, type A, for indexable inserts — Part 3: Style G

A

ISO 5611-4:2015

Cartridges, type A, for indexable inserts — Part 4: Style J

A


ISO 5611-5:2015

Cartridges, type A, for indexable inserts — Part 5: Style K

A

ISO 5611-6:2015

Cartridges, type A, for indexable inserts — Part 6: Style L

A

ISO 5611-7:2015

Cartridges, type A, for indexable inserts — Part 7: Style R

A

ISO 5611-8:2015

Cartridges, type A, for indexable inserts — Part 8: Style S

B

ISO 5611-9:2015

Cartridges, type A, for indexable inserts — Part 9: Style T

A

ISO 5611-10:2015

Cartridges, type A, for indexable inserts — Part 10: Style U

A

ISO 5611-11:2015

Cartridges, type A, for indexable inserts — Part 11: Style W

A

ISO 5611-12:2015

Cartridges, type A, for indexable inserts — Part 12: Style Y

A

TC 31 Tyres, rims and valves

ISO 5775-2:2015

Bicycle tyres and rims — Part 2: Rims

C

TC 34 Food products

ISO 20633:2015

Infant formula and adult nutritionals — Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography

D

ISO 20634:2015

Infant formula and adult nutrition-als — Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC)

C

ISO 20637:2015

Infant formula and adult nutrition-als — Determination of myo-inositol by liquid chromatography and pulsed amperometry

C

ISO 20638:2015

Infant formula — Determination of nu-cleotides by liquid chromatography

C

ISO 20639:2015

Infant formula and adult nutritionals — Determination of pantothenic acid by ultra high performance liquid chroma-tography and tandem mass spectrom-etry method (UHPLC-MS/MS)

B

ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum)

B

ISO 22630:2015

Oilseed meals — Determination of oil content — Rapid extraction method

B

ISO 16958:2015

Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method

F

ISO 20647:2015

Infant formula and adult nutritionals — Determination of total iodine — Induc-tively coupled plasma mass spectrom-etry (ICP-MS)

C

ISO 20649:2015

Infant formula and adult nutritionals — Determination of chromium, sele-nium and molybdenum — Inductively coupled plasma mass spectrometry (ICP-MS)

B

ISO 5985:2002/Amd 1:2015

Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid — Amendment 1

XZ

ISO 12228-1:2014

* Determination of individual and total sterols contents — Gas chromato-graphic method — Part 1: Animal and vegetable fats and oils

D

ISO/TR 17622:2015

* Molecular biomarker analysis — SSR analysis of sunflower

A


ISO/TS 19397:2015

* Determination of the film thickness of coatings using an ultrasonic gage

C

ISO 4630:2015 Clear liquids — Estimation of colour by the Gardner colour scale

A

ISO 6271:2015 Clear liquids — Estimation of colour by the platinum-cobalt colour scale

A

ISO 16482-1:2013

Binders for paints and varnishes — De-termination of the non-volatile-matter content of aqueous rosin-resin disper-sions — Part 1: Oven method

A

ISO 16482-2:2013

Binders for paints and varnishes — De-termination of the non-volatile-matter content of aqueous rosin-resin disper-sions — Part 2: Microwave method

A

TC 38 Textiles

ISO 18074:2015

Textiles — Identification of some ani-mal fibres by DNA analysis method — Cashmere, wool, yak and their blends

D

ISO 137:2015 Wool — Determination of fibre diam-eter — Projection microscope method

B

TC 39 Machine tools

ISO 16089:2015

Machine tools — Safety — Stationary grinding machines

H

TC 42 Photography

ISO 19262:2015

* Photography — Archiving Systems — Vocabulary

F

TC 43 Acoustics

ISO 16283-2:2015

Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation

F

TC 44 Welding and allied processes


ISO 636:2015 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification

B

ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification

C

ISO 17632:2015

Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc weld-ing of non-alloy and fine grain steels — Classification

E

ISO 18273:2015

Welding consumables — Wire elec-trodes, wires and rods for welding of aluminium and aluminium alloys — Classification

A


ISO 4079:2015 * Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

B

ISO 4642-1:2015

* Rubber and plastics hoses, non-col-lapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems

C

ISO 4642-2:2015

* Rubber and plastics hoses, non-col-lapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assem-blies) for pumps and vehicles

E

ISO 249:2014 * Rubber, raw natural — Determination of dirt content

B

ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C

A

ISO 6123-2:2015

* Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics

B

TC 58 Gas cylinders

ISO 11623:2015

Gas cylinders — Composite construc-tion — Periodic inspection and testing

E

ISO/TR 17329:2015

* Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes

E

TC 59 Buildings and civil engineering works

ISO 19861:2015

* Buildings and civil engineering works — Sealants — Determination of curing behaviour

A

ISO 19862:2015

* Buildings and civil engineering works — Sealants — Durability to extension compression cycling under accelerated weathering

B

TC 61 Plastics

ISO 20200:2015

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting condi-tions in a laboratory-scale test

B

ISO 18263-2:2015

* Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flex-ible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties

B

ISO 19062-1:2015

Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 19063-1:2015

Plastics — Impact-resistant polysty-rene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 19064-1:2015

Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications

A

ISO 2078:1993/Amd 1:2015

Textile glass — Yarns — Designation — Amendment 1

XZ

ISO 15039:2003/Amd 1:2015

Textile-glass rovings — Determination of solubility of size — Amendment 1

XZ


ISO/TS 17503:2015

* Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs

D

ISO 18404:2015

* Quantitative methods in process improvement — Six Sigma — Com-petencies for key personnel and their organizations in relation to Six Sigma and Lean implementation

E


ISO 8178-5:2015

Reciprocating internal combustion engines — Exhaust emission measure-ment — Part 5: Test fuels

F

TC 72 Textile machinery and accessories

ISO 18600:2015

* Textile machinery and accessories — Web roller cards — Terms and definitions

B

TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use

ISO 1135-4:2015

Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed

C

ISO 1135-5:2015

Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus

D

ISO 11040-1:2015

* Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges

A

TC 83 Sports and other recreational facilities and equipment

ISO 10958-2:2015

Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts

A


TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 15382:2015

Radiological protection — Procedures for monitoring the dose to the lens of the eye, the skin and the extremities

E

ISO 18589-3:2015

Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionu-clides using gamma-ray spectrometry

D

ISO 20785-3:2015

* Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes

C

ISO 21909-1:2015

Passive neutron dosimetry systems — Part 1: Performance and test require-ments for personal dosimetry

F

TC 89 Wood-based panels

ISO 12460-5:2015

Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perfora-tor method)

C

TC 92 Fire safety

ISO 16730-1:2015

Fire safety engineering — Procedures and requirements for verification and validation of calculation methods — Part 1: General

F

ISO 16733-1:2015

Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios

E

TC 94 Personal safety -- Protective clothing and equipment

ISO 11999-5:2015

* PPE for firefighters — Test methods and requirements for PPE used by fire-fighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets

D

ISO 16900-14:2015

* Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level

B

ISO/TS 16976-1:2015

* Respiratory protective devices — Hu-man factors — Part 1: Metabolic rates and respiratory flow rates

D

TC 96 Cranes

ISO 15442:2012/Amd 1:2015

* Cranes — Safety requirements for loader cranes — Amendment 1

XZ

TC 100 Chains and chain sprockets for power transmission and conveyors

ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

E

ISO 4347:2015 Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths

D

TC 102 Iron ore and direct reduced iron

ISO 2597-2:2015

* Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction

C

TC 104 Freight containers

ISO 18185-3:2015

* Freight containers — Electronic seals — Part 3: Environmental characteristics

C

TC 106 Dentistry

ISO 13017:2012/Amd 1:2015

Dentistry — Magnetic attachments — Amendment 1

XZ

ISO 19429:2015

Dentistry — Designation system for dental implants

A


ISO 28721-2:2015

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock

A

ISO 28721-4:2015

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

A


ISO 2017-3:2015

Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings

B

ISO 16063-43:2015

* Methods for the calibration of vibra-tion and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification

D

ISO 8727:1997/Amd 1:2015

Mechanical vibration and shock — Hu-man exposure — Biodynamic coordi-nate systems — Amendment 1

XZ

ISO 13374-4:2015

* Condition monitoring and diagnostics of machine systems — Data process-ing, communication and presentation — Part 4: Presentation

A

ISO 13381-1:2015

Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines

D

TC 110 Industrial trucks

ISO 10896-4:2015

* Rough-terrain trucks — Safety require-ments and verification — Part 4: Ad-ditional requirements for variable-reach trucks handling freely suspended loads

B

TC 111 Round steel link chains, chain slings, components and accessories

ISO 3266:2010/Amd 1:2015

Forged steel eyebolts grade 4 for gen-eral lifting purposes — Amendment 1

XZ

TC 115 Pumps

ISO/ASME 14414:2015

Pump system energy assessment

G



IEC 60601-1-12:2015

* Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment

H

TC 122 Packaging

ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages

B

ISO 8317:2015 Child-resistant packaging — Require-ments and testing procedures for reclosable packages

C

ISO 21067-2:2015

* Packaging — Vocabulary — Part 2: Packaging and the environment terms

B

TC 127 Earth-moving machinery

ISO 10261:2002/Amd 1:2015

Earth-moving machinery — Product identification numbering system — Amendment 1

XZ

TC 136 Furniture

ISO 9221-1:2015

* Furniture — Children's high chairs — Part 1: Safety requirements

B

ISO 9221-2:2015

* Furniture — Children's high chairs — Part 2: Test methods

D

TC 153 Valves

ISO 17292:2015

Metal ball valves for petroleum, petro-chemical and allied industries

D

ISO 28921-2:2015

Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing

C

TC 156 Corrosion of metals and alloys

ISO 18070:2015

Corrosion of metals and alloys — Crev-ice corrosion formers with disc springs for flat specimens or tubes made from stainless steel

B

ISO 18089:2015

Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control

C

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23550:2011/Amd 1:2015

* Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1

XZ

TC 163 Thermal performance and en-ergy use in the built environment

ISO 6781-3:2015

Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of equipment opera-tors, data analysts and report writers

C

TC 164 Mechanical testing of metals

ISO 11531:2015

* Metallic materials — Sheet and strip — Earing test

A

ISO 18338:2015

Metallic materials — Torsion test at ambient temperature

C


ISO 14132-1:2015

* Optics and photonics — Vocabulary for telescopic systems — Part 1: General terms and alphabetical indexes of terms in ISO 14132

A

ISO 14132-2:2015

* Optics and photonics — Vocabulary for telescopic systems — Part 2: Terms for binoculars, monoculars and spotting scopes

A

ISO/TS 18339:2015

* Endotherapy devices — Eyepiece cap and light guide connector

A

ISO 13694:2015

Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution

C

TC 173 Assistive products for persons with disability

ISO 7176-19:2008/Amd 1:2015

* Wheelchairs — Part 19: Wheeled mo-bility devices for use as seats in motor vehicles — Amendment 1: Annex G

XZ

ISO 10865-2:2015

Wheelchair containment and occu-pant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 2: Systems for forward-facing wheelchair-seated passengers

E

TC 176 Quality management and quality assurance

ISO 9000:2015 * Quality management systems — Fun-damentals and vocabulary

G

ISO 9001:2015 * Quality management systems — Requirements

E

TC 182 Geotechnics

ISO 17892-3:2015

* Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density

B

TC 184 Automation systems and integration

ISO 8000-8:2015

* Data quality — Part 8: Information and data quality: Concepts and measuring

C

TC 188 Small craft

ISO 9094:2015 Small craft — Fire protection

E

ISO 21487:2012/Amd 2:2015

Small craft — Permanently installed petrol and diesel fuel tanks — Amend-ment 2

XZ

TC 194 Biological and clinical evaluation of medical devices


ISO 22442-1:2015

* Medical devices utilizing animal tissues and their derivatives — Part 1: Applica-tion of risk management

E

ISO 22442-2:2015

* Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling

C

TC 199 Safety of machinery

ISO 14120:2015

Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards

E

ISO 14123-2:2015

Safety of machinery — Reduction of risks to health resulting from hazard-ous substances emitted by machinery — Part 2: Methodology leading to verification procedures

A

ISO/TR 24119:2015

Safety of machinery — Evaluation of fault masking serial connection of inter-locking devices associated with guards with potential free contacts

D

TC 201 Surface chemical analysis

ISO 19830:2015

* Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy

D


ISO 12813:2015

Electronic fee collection — Compliance check communication for autonomous systems

F

ISO 13141:2015

Electronic fee collection — Localisa-tion augmentation communication for autonomous systems

E

ISO/TS 15638-13:2015

* Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 13: "Mass" information for jurisdictional control and enforcement

G

ISO 15784-2:2015

* Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using SNMP

F

ISO/TR 17185-2:2015

* Intelligent transport systems — Pub-lic transport user information — Part 2: Public transport data and inter-face standards catalogue and cross references

H

ISO 24102-2:2015

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — ITS station management — Part 2: Remote management of ITS-SCUs

D


ISO 14629:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) — De-termination of flowability of ceramic powders

B

ISO 17170:2015

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for spherical indentation of porous ceramics

B

ISO 18452:2005

Fine ceramics (advanced ceramics, ad-vanced technical ceramics) — Determi-nation of thickness of ceramic films by contact-probe profilometer

B

ISO 18591:2015

* Fine ceramics (advanced ceramics, advanced technical ceramics) — De-termination of compressive strength of ceramic granules

B

ISO 20502:2005

Fine ceramics (advanced ceramics, ad-vanced technical ceramics) — Determi-nation of adhesion of ceramic coatings by scratch testing

E

ISO 20504:2006

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature

D

ISO 26423:2009

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of coating thickness by crater-grinding method

C

ISO 26443:2008

Fine ceramics (advanced ceramics, advanced technical ceramics) — Rock-well indentation test for evaluation of adhesion of ceramic coatings

A

TC 211 Geographic information/Geomatics

ISO 19109:2015

Geographic information — Rules for application schema

H

TC 215 Health informatics

ISO/HL7 10781:2015

Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)

G

ISO 17090-2:2015

* Health informatics — Public key infra-structure — Part 2: Certificate profile

E

ISO 21549-5:2015

Health informatics — Patient health-card data — Part 5: Identification data

B

TC 217 Cosmetics

ISO 18416:2015

Cosmetics — Microbiology — Detec-tion of Candida albicans

C

ISO 21150:2015

Cosmetics — Microbiology — Detec-tion of Escherichia coli

C

ISO 22717:2015

Cosmetics — Microbiology — Detec-tion of Pseudomonas aeruginosa

C

ISO 22718:2015

Cosmetics — Microbiology — Detec-tion of Staphylococcus aureus

C

TC 220 Cryogenic vessels

ISO 21009-2:2015

Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements

C

TC 221 Geosynthetics

ISO 18325:2015

Geosynthetics — Test method for the determination of water discharge ca-pacity for prefabricated vertical drains

B

TC 226 Materials for the production of primary aluminium


ISO 19950:2015

* Aluminium oxide primarily used for the production of aluminium — De-termination of alpha alumina content — Method using X-ray diffraction net peak areas

B

ISO 23201:2015

* Aluminium oxide primarily used for production of aluminium — Determina-tion of trace elements — Wavelength dispersive X-ray fluorescence spectro-metric method

E

TC 229 Nanotechnologies

ISO/TS 18110:2015

Nanotechnologies — Vocabularies for science, technology and innovation indicators

A

ISO/TS 80004-1:2015

Nanotechnologies — Vocabulary — Part 1: Core terms

A


ISO/TS 16996:2015

Solid biofuels — Determination of elemental composition by X-ray fluorescence

C

TC 241 Road traffic safety management systems

ISO 39001:2012

Road traffic safety (RTS) management systems - Requirements with guidance for use

F

TC 249 Traditional chinese medicine

ISO 18665:2015

* Traditional Chinese medicine — Herbal decoction apparatus

B

ISO 18666:2015

* Traditional Chinese medicine — Gener-al requirements of moxibustion devices

B

TC 256 Pigments, dyestuffs and extenders

ISO 18451-1:2015

* Pigments, dyestuffs and extenders — Terminology — Part 1: General terms

D

ISO 18451-2:2015

* Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects

C

TC 258 Project, programme and portfo-lio management

ISO 21504:2015

Project, programme and portfolio management — Guidance on portfolio management

C

TC 263 Coalbed methane (CBM)

ISO 18875:2015

* Coalbed methane exploration and de-velopment — Terms and definitions

B

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 3380:2015 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C

A

ISO 17235:2015

Leather — Physical and mechanical tests — Determination of softness

A

CASCO Committee on conformity assessment

ISO/IEC TS 17021-5:2014

* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset management systems

B


ISO/IEC 8824-1:2015

* Information technology — Abstract Syntax Notation One (ASN.1): Specifi-cation of basic notation — Part 1:

H

ISO/IEC 8824-2:2015

* Information technology — Abstract Syntax Notation One (ASN.1): Informa-tion object specification — Part 2:

E

ISO/IEC 8824-3:2015

* Information technology — Abstract Syntax Notation One (ASN.1): Con-straint specification — Part 3:

B

ISO/IEC 8824-4:2015

* Information technology — Abstract Syntax Notation One (ASN.1): Param-eterization of ASN.1 specifications — Part 4:

C

ISO/IEC 8825-1:2015

* Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical En-coding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:

E

ISO/IEC 8825-2:2015

* Information technology — ASN.1 en-coding rules: Specification of Packed Encoding Rules (PER) — Part 2:

G

ISO/IEC 8825-3:2015

* Information technology — ASN.1 en-coding rules: Specification of Encoding Control Notation (ECN) — Part 3:

H

ISO/IEC 8825-4:2015

* Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:

G

ISO/IEC 8825-5:2015

* Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5:

G

ISO/IEC 8825-6:2015

* Information technology — ASN.1 encoding rules: Registration and ap-plication of PER encoding instructions — Part 6:

C

ISO/IEC 8825-7:2015

* Information technology — ASN.1 en-coding rules — Part 7: Specification of Octet Encoding Rules (OER)

D

ISO/IEC 15026-3:2015

* Systems and software engineering — Systems and software assurance — Part 3: System integrity levels

D

ISO/IEC 26550:2015

* Software and systems engineering — Reference model for product line engineering and management

E

ISO/IEC 26555:2015

* Software and systems engineering — Tools and methods for product line technical management

G


ISO/IEC 29110-2-1:2015

* Software Engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2-1: Framework and taxonomy

E

ISO/IEC TR 29110-5-6-1:2015

* Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-1: Systems engineering — Management and en-gineering guide: Generic profile group: Entry profile

F

ISO/IEC 29155-3:2015

* Systems and software engineer-ing — Information technology project performance benchmarking framework — Part 3: Guidance for reporting

C

ISO/IEC 17839-2:2015

* Information technology — Biometric System-on-Card — Part 2: Physical characteristics

A

ISO/IEC 18328-2:2015

* Identification cards — ICC-managed devices — Part 2: Physical character-istics and test methods for cards with devices

C

ISO/IEC 18584:2015

* Information technology — Identifi-cation cards — Conformance test requirements for on-card biometric comparison applications

C

ISO/IEC TS 18508:2015

* Information technology — Additional Parallel Features in Fortran

G

ISO/IEC TS 19217:2015

* Information technology — Program-ming languages — C++ Extensions for concepts

G

ISO/IEC 30191:2015

* Information technology — Digitally recorded media for information inter-change and storage — 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk

H

ISO/IEC 19776-1:2015

* Information technology — Com-puter graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 1: Extensible Markup Language (XML) encoding

F

ISO/IEC 19776-2:2015

* Information technology — Com-puter graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 2: Classic VRML encoding

A

ISO/IEC 18033-5:2015

* Information technology — Security techniques — Encryption algorithms — Part 5: Identity-based ciphers

F

ISO/IEC 19790:2012

* Information technology — Security techniques — Security requirements for cryptographic modules

G

ISO/IEC 24759:2014

* Information technology — Security techniques — Test requirements for cryptographic modules

H

ISO/IEC 27001:2013/Cor 2:2015

* Information technology — Security techniques — Information security management systems — Requirements — Technical Corrigendum 2

free

ISO/IEC 27002:2013/Cor 2:2015

* Information technology — Security techniques — Code of practice for information security controls — Techni-cal Corrigendum 2

free

ISO/IEC 27010:2015

* Information technology — Security techniques — Information security management for inter-sector and inter-organizational communications

E

ISO/IEC 27013:2015

* Information technology — Secu-rity techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1

F

ISO/IEC 27017:2015

* Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 for cloud services

E

ISO/IEC 24711:2015

* Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components

E

ISO/IEC 14496-3:2009/Cor 7:2015

* Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 7

free

ISO/IEC 14496-4:2004/Amd 43:2015

* Information technology — Coding of audio-visual objects — Part 4: Con-formance testing — Amendment 43: 3D-AVC conformance testing

XZ

ISO/IEC 14496-5:2001/Amd 36:2015

* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding refer-ence software

XZ

ISO/IEC 14496-5:2001/Amd 37:2015

* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 37: New levels for the AAC profiles, uniDRC support, AAC block length parameter corrections

XZ

ISO/IEC 14496-10:2014/Amd 1:2015

* Information technology — Coding of audio-visual objects — Part 10: Ad-vanced Video Coding — Amendment 1: Multi-Resolution frame compatible stereoscopic video with depth maps, additional supplemental enhance-ment information and video usability information

XZ

ISO/IEC 14496-11:2015

* Information technology — Coding of audio-visual objects — Part 11: Scene description and application engine

H

ISO/IEC 14496-12:2015

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format

H

ISO/IEC 14496-27:2009/Amd 5:2015

* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amend-ment 5: Multi-resolution 3D mesh compression

XZ

ISO/IEC 15444-1:2004/Amd 7:2015

* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 7: Profiles for an interoperable master format (IMF)

XZ

ISO/IEC 15444-12:2015

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format

H

ISO/IEC 15938-5:2003/Amd 5:2015

* Information technology — Multimedia content description interface — Part 5: Multimedia description schemes — Amendment 5: Quality metadata, multiple text encodings, extended clas-sification metadata

XZ


ISO/IEC 23003-4:2015

* Information technology — MPEG audio technologies — Part 4: Dynamic Range Control

H

ISO/IEC TR 23008-13:2015

* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 13: MMT implementation guidelines

G

ISO/IEC 29199-5:2012/Amd 1:2015

* Information technology — JPEG XR image coding system — Part 5: Reference software — Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format

XZ

ISO/IEC 18046-4:2015

* Information technology — Radio frequency identification device perfor-mance test methods — Part 4: Test methods for performance of RFID gates in libraries

F

ISO/IEC 29167-16:2015

* Information technology — Auto-matic identification and data capture techniques — Part 16: Crypto suite ECDSA-ECDH security services for air interface communications

E

ISO/IEC 15944-20:2015

* Information technology — Business Operational View — Part 20: Linking business operational view to functional Linking business operational view to functional service viewservice view

E

ISO/IEC TS 20071-21:2015

* Information technology — User inter-face component accessibility — Part 21: Guidance on audio descriptions

D

ISO/IEC TR 30109:2015

* Information technology — User interfaces — Worldwide availability of personalized computer environments

B

ISO/IEC 19788-8:2015

* Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data ele-ments for MLR records

E

ISO/IEC 19788-9:2015

* Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data ele-ments for persons

D

ISO/IEC 19794-2:2011/Amd 2:2015

* Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 2: XML encoding and clarification of defects

XZ

ISO/IEC 19794-4:2011/Amd 2:2015

* Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 2: XML encoding and clarification of defects

D

ISO/IEC 19794-5:2011/Amd 2:2015

* Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 2: XML encoding and clarification of defects

G

ISO/IEC 19794-5:2005/Cor 4:2015

* Information technology — Biometric data interchange formats — Part 5: Face image data — Technical Cor-rigendum 4

free

ISO/IEC 19794-7:2014/Amd 1:2015

* Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data — Amendment 1: XML encoding

XZ

ISO/IEC TR 24722:2015

* Information technology — Biometrics — Multimodal and other multibiometric fusion

D

ISO/IEC 24779-9:2015

* Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technolo-gies — Pictograms, icons and symbols for use with biometric systems — Part 9: Vascular applications

A

ISO/IEC TR 29156:2015

* Information technology — Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics

F

ISO/IEC 30108-1:2015

* Information technology — Biometric Identity Assurance Services — Part 1: BIAS services

G

ISO/IEC TR 30110:2015

* Information technology — Cross jurisdictional and societal aspects of implementation of biometric technolo-gies — Biometrics and children

B

ISO/IEC TR 20000-10:2015

* Information technology — Service management — Part 10: Concepts and terminology

D

Standards confirmed

The following International Standards are confimred for a five year period:


ISO 30007:2010

ISO 8729-1:2010

ISO 10596:2009

TC 10 Technical product documentation

ISO 128-22:1999 (reconfirmed)

ISO 5457:1999 (reconfirmed)




TC 21 Equipment for fire protection and fire fighting


TC 22 Road vehicles






ISO 12619-2:2014

TC 23 Tractors and machinery for agriculture and forestry



TC 34 Food products

ISO 12871:2010

ISO 12872:2010

ISO 12873:2010

ISO 12966-3:2009


TC 41 Pulleys and belts (including veebelts)


TC 43 Acoustics

ISO 3382-1:2009












TC 48 Laboratory equipment






TC 58 Gas cylinders

ISO 9809-1:2010

ISO 9809-2:2010

ISO 9809-3:2010



TC 60 Gears




TC 61 Plastics



ISO/TS 21749:2005

(reconfirmed)

TC 83 Sports and other recreational facilities and equipment


TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 2889:2010




TC 92 Fire safety

ISO 19703:2010

TC 96 Cranes

ISO 8566-3:2010

TC 98 Bases for design of structures



TC 102 Iron ore and direct reduced iron

ISO 11323:2010





IEC 60601-1-8:2006

TC 131 Fluid power systems






ISO 12151-3:2010


TC 155 Nickel and nickel alloys


TC 159 Ergonomics


ISO/TS 9241-411:2012



ISO 15529:2010

TC 189 Ceramic tile


ISO 10545-12:1995

(reconfirmed)

TC 195 Building construction machinery and equipment



TC 199 Safety of machinery


ISO 12100:2010

ISO 13855:2010

TC 213 Dimensional and geometrical product specifications and verification

ISO 286-2:2010

ISO 10360-5:2010

TMBG Technical Management Board - groups

ISO/IEC Guide 98-1:2009

ISO/IEC Guide 98-4:2012

ISO/IEC Guide 99:2007


ISO/IEC 29133:2010

Standards withdrawn


TC 22 Road vehicles


ISO 6550-3:2013 (replaced by )


ISO/PAS 3930:2009

(replaced by )

TC 29 Small tools

ISO 5611:1995 (replaced by ISO 5611-1:2015, ISO 5611-2:2015, ISO 5611-3:2015, ISO 5611-4:2015, ISO 5611-5:2015, ISO 5611-6:2015, ISO 5611-7:2015, ISO 5611-8:2015, ISO 5611-9:2015, ISO 5611-10:2015, ISO 5611-11:2015, ISO 5611-12:2015)

TC 34 Food products

ISO 734-1:2006 (replaced by ISO 734:2015)







TC 43 Acoustics

ISO 140-7:1998 (replaced by ISO 16283-1:2014, ISO 16283-2:2015)

ISO 140-14:2004 (replaced by ISO 16283-1:2014, ISO 16283-2:2015)

TC 61 Plastics

ISO 2580-1:2002 (replaced by ISO 19062-1:2015)



TC 77 Products in fibre reinforced cement

ISO 8335:1987 (replaced by )

TC 79 Light metals and their alloys






TC 85 Nuclear energy, nuclear technologies, and radiological protection


ISO 21909:2005 (replaced by ISO 21909-1:2015)

TC 115 Pumps


TC 119 Powder metallurgy


TC 155 Nickel and nickel alloys









TC 182 Geotechnics

ISO/TS 17892-3:2004

(replaced by ISO 17892-3:2015)

TC 188 Small craft




ISO/TS 12813:2009

(replaced by ISO 12813:2015)

ISO/TS 13141:2010

(replaced by ISO 13141:2015)

ISO 24102:2010 (replaced by ISO 24102-1:2013, ISO 24102-2:2015, ISO 24102-3:2013, ISO 24102-4:2013, ISO 24102-5:2013)

CASCO Committee on conformity assessment

ISO/IEC TS 17022:2012

(replaced by )


ISO/IEC 29110-2:2011

(replaced by ISO/IEC 29110-2-1:2015)

ISO/IEC ISP 15287-2:2000

(replaced by )

Meeting calendar

(update at 01 November 2015)

Meetings called for the month of October are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

December 2015

7-11 Dubaï (United Arab Emirates)

TC 217 Cosmetics

8 Istanbul (Turkey) TC 180 Solar energy

8-9 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

10 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

10 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities

10-11 Sydney (Australia)

TC 211 Geographic in-formation/Geomatics

11-12 Stuttgart (Germany)

TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

14-17 Vienna (Austria) TC 4 Rolling bearings

14-17 Lyon (France) TC 272 Forensic sciences

14-18 Milan (Italy) TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems

15-16 Berlin (Germany) TC 44/SC 10 Welding and allied processes/Quality management in the field of welding


18 Berlin (Germany) TC 198 Sterilization of health care products

January 2016

11-15 Padova (Italy) TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management

11-15 Vienna (Austria) TC 268 Sustainable develop-ment in communities

11-15 Vienna (Austria) TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

18-19 Martigny (Switzerland)

JTC 1/SC 37 Information technology/Biometrics

20-21 Singapore (Singapore)

TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

22 Berlin (Germany) TC 76 Transfusion, infusion and injection, and blood processing equipment for medi-cal and pharmaceuti-cal use

25-27 London (United Kingdom)

TC 8/SC 8 Ships and marine technology/Ship design

25-27 Weinheim (Germany)

TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma




TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes


TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

27 Geneva (Switzerland)

COUNCIL Council


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

28 London (United Kingdom)

TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

28 London (United Kingdom)

TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

28 West Consho-hocken (Phila-delphia) (USA)

TC 261 Additive manufacturing

February 2016

1-3 Virtual (Unknown)

TC 44/SC 7 Welding and allied processes/Represen-tation and terms

1-5 Vienna (Austria) PC 273 Customer contact centres

8-12 Paris (France) TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

15-19 Rome (Italy) JTC 1/SC 35 Information technol-ogy/User interfaces

16-18 Savannah (USA) TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry


President's committee


24-25 Kuala Lumpur (Malaysia)

TC 22 Road vehicles

25-26 Geneva (Switzerland)

TMB Technical Manage-ment Board

February-March 2016

29-4 Xian (China) JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

29-3 Birming-ham (United Kingdom)

TC 257 Evaluation of energy savings

March 2016

2-3 Frankfurt (Germany)

TC 297 Waste management, recycling and road operation service

2-4 Zurich (Switzerland)

TC 182 Geotechnics


TC 225 Market, opinion and social research

14-18 Paris (France) TC 34/SC 18 Food products/Cocoa

14-18 Kanazawa (Japan)

TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing


TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures


TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems


* President's committee


15 Basel (Switzerland)

TC 114/SC 3 Horology/Water-resistant watches




* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

17 Milan (Italy) TC 221 Geosynthetics


* COUNCIL Council

April 2016


4-5 Beijing (China) TC 117 Fans

4-8 New Delhi (India) * TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

6 Delft (Netherlands)

TC 219 Floor coverings

7 Delft (Netherlands)

* TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics

11-15 Sundsvall (Sweden)

* PC 287 Chain of custody of wood and wood-based products


** TC 178 Lifts, escalators and moving walks

11-16 Copenhagen (Denmark)



* TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments


* TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems

12-13 (Europe) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

14 Beauvais (France)

* TC 23 Tractors and machin-ery for agriculture and forestry

18-19 Tampa, Florida (USA)

JTC 1/SC 27 Information tech-nology/IT Security techniques

22-23 Clausthal-Zeller-feld (Germany)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

24-29 Concord, Cali-fornia (USA)

* TC 204 Intelligent transport systems

25 Frankfurt (Germany)

** TC 68/SC 4 Financial services/Securities and related financial instruments

25-29 Berlin (Germany) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances


* TC 68/SC 7 Financial services/Core banking


* TC 68 Financial services

Toronto (Canada) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

May 2016

2-6 Amsterdam (Netherlands)

* TC 215 Health informatics

5-6 Milan (Italy) * TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

6-13 Berlin (Germany) ** TC 10 Technical product documentation

9-11 Paris (France) * TC 34/SC 9 Food products/Microbiology

9-13 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

9-13 Wellington (New Zealand)

* TC 46 Information and documentation

9-13 Wellington (New Zealand)

* TC 46/SC 11 Information and doc-umentation/Archives/records management

9-13 (USA) ** TC 276 Biotechnology

10 Virtual (Unknown)

* TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

11 (Portugal) ** TC 87 Cork

11 Seoul (Korea, Republic of)

** TC 122 Packaging

12-13 Tokyo (Japan) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

16-20 Suzhou (China) * JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance

16-20 Chicago (USA) ** TC 121 Anaesthetic and res-piratory equipment

19-20 Tokyo (Japan) * TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

22-27 Sapporo (Japan) * TC 184/SC 4 Automation systems and integration/Indus-trial data

23-25 Rome (Italy) * TC 145 Graphical symbols

23-27 Tokyo (Japan) * TC 35 Paints and varnishes

23-27 Berlin (Germany) ** TC 130 Graphic technology

23-28 Ljubljana (Slovenia)

* TC 37/SC 4 Terminology and other language and content resources/Language resource management

25 Brussels (Belgium)

** TC 115 Pumps

26-27 Kuala Lumpur (Malaysia)

* TC 228 Tourism and related services

(Japan) ** TC 22/SC 39 Road vehicles/Ergonomics

Atlanta (USA) ** TC 86 Refrigeration and air-conditioning


(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

Mexico City (Mexico)

** TC 289 Brand evaluation

May-June 2016


* TC 34/SC 5 Food products/Milk and milk products

31-2 Lulea (Sweden) TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis

June 2016


* JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information


* TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

6-8 Paris (France) * TC 220 Cryogenic vessels

7-10 Prague (Czech Republic)

* TC 156 Corrosion of metals and alloys

9-16 Portland, Maine (USA)

* JTC 1/SC 28 Information technol-ogy/Office equipment





* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

14-17 Ekaterinburg (Russian Federation)

** REMCO Committee on refer-ence materials


* TMB Technical Manage-ment Board

18-20 Munich (Germany)


20-21 Berlin (Germany) * TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

21-22 Düsseldorf (Germany)

TC 17/SC 10 Steel/Steel for pres-sure purposes

22-23 Porto (Portugal) * TC 17/SC 17 Steel/Steel wire rod and wire products

22-23 Porto (Portugal) * TC 269 Railway applications

24 Porto (Portugal) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets



(Germany) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Europe) ** TC 22/SC 38 Road vehicles/Motor-cycles and mopeds

(Germany) ** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

(Germany) ** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

(Canada) ** TC 159/SC 1 Ergonomics/General ergonomics principles

St. Peters-burg (Russian Federation)

** TC 172/SC 4 Optics and photonics/Telescopic systems

Stockholm (Sweden)

** TC 242 Energy Management

Turin (Italy) ** TC 274 Light and lighting

June-July 2016

25-1 (Denmark) ** TC 37 Terminology and other language and content resources


* TC 188 Small craft

27-1 (Unknown) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

27-1 Hangzhou (China)

** TC 268 Sustainable develop-ment in communities


** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

2nd Quarter 2016

(Germany) ** TC 34/SC 4 Food products/Cere-als and pulses

1st Semester 2016

New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

(China) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

August 2016

19 Berlin (Germany) ** TC 206 Fine ceramics

22-26 Beijing (China) * JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation



(USA) ** TC 91 Surface active agents

September 2016

5-9 Bilbao (Spain) * TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock


* TC 147 Water quality

11-17 San José, Cali-fornia (USA)

* TC 130 Graphic technology

18 Beijing (China) * President's committee


19 Beijing (China) * COUNCIL Council

19-22 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases


19-25 Melbourne (Australia)

* TC 165 Timber structures

20 Beijing (China) * DEVCO Committee on devel-oping country matters

20 Beijing (China) * TMB Technical Manage-ment Board

20-22 Yichang (China) ** TC 256 Pigments, dyestuffs and extenders

20-22 Stockholm (Sweden)

** TC 264 Fireworks

21-23 Beijing (China) * GA General Assembly

21-23 Beijing (China) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

22 Beijing (China) * CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

26-30 San José, Cali-fornia (USA)

* JTC 1/SC 2 Information technol-ogy/Coded character sets

26-30 Seoul (Korea, Republic of)

** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

26-30 Burlington, Ver-mont (USA)

** TC 146/SC 3 Air quality/Ambient atmospheres

26-30 Burlington, Ver-mont (USA)

** TC 146/SC 6 Air quality/Indoor air

26-30 Berlin (Germany) ** TC 163 Thermal performance and energy use in the built environment

26-30 Berlin (Germany) ** TC 205 Building environment design

26-30 (Canada) ** TC 218 Timber

28-29 Delft (Netherlands)

* TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products

29-30 (France) ** TC 17 Steel

30 Burlington, Ver-mont (USA)

** TC 146/SC 1 Air quality/Stationary source emissions

Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Asia) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

Berlin (Germany) ** TC 61 Plastics

Cartagena de In-dias (Colombia)

** TC 71 Concrete, reinforced concrete and pre-stressed concrete

Burlington, Ver-mont (USA)

** TC 146/SC 2 Air quality/Workplace atmospheres

Sao Paulo (Brazil)

** TC 173 Assistive products for persons with disability

Sao Paulo (Brazil)

** TC 209 Cleanrooms and as-sociated controlled environments

Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2016

Seoul (Korea, Republic of)

** TC 92/SC 1 Fire safety/Fire initia-tion and growth

October 2016

2-7 Auckland (New Zealand)

* TC 204 Intelligent transport systems

5-6 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

5-7 Madrid (Spain) * TC 225 Market, opinion and social research

6 Virtual (Unknown)



6 (Unknown) ** TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

6-7 Berlin (Germany) ** TC 119 Powder metallurgy

10-14 Hoffman Estates, Illinois (USA)

* TC 58/SC 2 Gas cylinders/Cylin-der fittings


* TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

14 Hangzhou (China)

* TC 70 Internal combustion engines

17-21 Berlin (Germany) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

17-21 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints

17-21 Moscow (Rus-sian Federation)

* TC 20 Aircraft and space vehicles


* TC 58/SC 3 Gas cylinders/Cylin-der design


* TC 96/SC 6 Cranes/Mobile cranes

17-21 Kyoto (Japan) * TC 138 Plastics pipes, fittings and valves for the transport of fluids

19-21 Philadelphia (USA)

** TC 202 Microbeam analysis


* TC 58 Gas cylinders

20-21 Vienna (Austria) * TC 227 Springs

24-28 Tokyo (Japan) ** TC 79 Light metals and their alloys


* TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

26-27 Osaka (Japan) * TC 126 Tobacco and tobacco products

26-28 (United Kingdom)

** TC 123 Plain bearings

27-28 Orlando (USA) ** TC 17/SC 12 Steel/Continuous mill flat rolled products

Berlin (Germany) ** TC 59 Buildings and civil engineering works


Berlin (Germany) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

Tokyo (Japan) ** TC 153 Valves

(Japan) ** TC 164 Mechanical testing of metals

(Korea, Repub-lic of)

** TC 201 Surface chemical analysis

Tel Aviv (Israel) ** TC 282 Water re-use

Tel Aviv (Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

October-November 2016

30-4 Langkawi (Malaysia)

** TC 45 Rubber and rubber products


* TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

November 2016

1-4 Troy (USA) ** TC 22/SC 36 Road vehicles/Safety and impact testing


* TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


* TC 98 Bases for design of structures

7-12 Lillehammer (Norway)

** JTC 1 Information technology

8-10 Kobe (Japan) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

Christchurch (New Zealand)

** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

(China) ** TC 134 Fertilizers and soil conditioners

(Unknown) ** TC 215 Health informatics

4th Quarter 2016

Delft (Netherlands)

** TC 28 Petroleum products and related products of synthetic or bio-logical origin

Delft (Netherlands)

** TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

Delft (Netherlands)

** TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels

(India) ** TC 113 Hydrometry

2nd Semester 2016

(Europe) ** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

(Europe) ** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

(Europe) ** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Florence (Italy) ** TC 160 Glass in building

Florence (Italy) ** TC 160/SC 1 Glass in build-ing/Product considerations

Florence (Italy) ** TC 160/SC 2 Glass in building/Use considerations

Month unknown 2016


** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

Paris (France) ** TC 34 Food products

(South Africa) ** TC 44 Welding and allied processes

(Sweden) ** TC 102 Iron ore and direct reduced iron

(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates

March 2017

6 Kyoto (Japan) ** TC 60 Gears


** COUNCIL Council

April 2017

10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

(China) ** TC 215 Health informatics

May 2017

Washington, D.C (USA)

** TC 4 Rolling bearings

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

June 2017

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(USA) ** TC 42 Photography

2nd Quarter 2017

(North America) ** TC 31 Tyres, rims and valves

(North America) ** TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

(North America) ** TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

Tsukuba (Japan) ** TC 92 Fire safety

July 2017

(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

August 2017


31 Raleigh (USA) * TC 38/SC 23 Textiles/Fibres and yarns

Raleigh (USA) ** TC 38 Textiles

September 2017

18 Berlin (Germany) * COUNCIL Council

20-22 Berlin (Germany) ** GA General Assembly

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

Vienna (Austria) ** TC 165 Timber structures

New Delhi (India) ** TC 178 Lifts, escalators and moving walks

(Japan) ** TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

22-27 Hawaii (USA) * TC 45 Rubber and rubber products


** TC 215 Health informatics

November 2017

(India) ** TC 54 Essential oils

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Erlangen (Germany)

** TC 36 Cinematography

(South Africa) ** TC 46 Information and documentation

(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(United Kingdom)

** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(USA) ** TC 198 Sterilization of health care products

Milan (Italy) ** TC 206 Fine ceramics

June 2018


** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

September 2018

(Japan) ** TC 61 Plastics

3rd Quarter 2018

(Netherlands) ** TC 92 Fire safety

October 2018

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Date post:	31-Mar-2018
Category:	Documents
Upload:	doannga
View:	295 times
Download:	7 times

ISO Update · ISO/CD 22762-1 Elastomeric seismic-protection isolators — Part 1: Test methods...

Documents