ISO Update · PDF fileISO Update, Supplement to ISO Focus+ ... de l'Industrie, de l'Artisanat...

ISO Update

Supplement to ISO Focus+

April 2013

People and places

ISO Update, Supplement to ISO Focus+– April 2013

ISO Members

Since the March 2013 issue the following changes affecting ISO members have occurred:

New CEOs

Member body

AUSTRIA (ASI) Managing Director: Dr Elisabeth Stampfl-Blaha

COSTA RICA (INTECO) Executive Director: Mr Mauricio Céspedes MEXICO (DGN) Director General: Mr Alberto Ulises Esteban Marina PANAMA (COPANIT) General Director: Mr Ahmed Elias Morón SLOVAKIA (SUTN) General Director: Mr. Igor Hladik THAILAND (TISI) Secretary-General: Mr Suraphong Chiengtong

Correspondent members

KYRGYZSTAN (KYRGYZST) Director: Mr Muhamat Kaparov

Address changes:

Member bodies

EGYPT (EOS) E-mail [email protected]

Correspondent members

MAURITANIA (DNPQ)

Direction de la Normalisation et de la Promotion de la Qualité Ministère du Commerce, de l'Industrie, de l'Artisanat et du Tourisme BP : 3003 Nouakchott

ISO Update, Supplement to ISO Focus -- April 2013 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 March to 31 March 2013

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 4 Rolling bearings

ISO/CD 464 Rolling bearings — Radial bearings with locat-ing snap ring — Dimensions and tolerances

TC 20 Aircraft and space vehicles

ISO/CD 16457 Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere

ISO/CD 17540 Space systems — Liquid rocket engines and test stands — Terms and definitions

TC 22 Road vehicles

ISO/DTR 10982

Road vehicles — Test procedures for evaluat-ing out-of-position vehicle occupant interac-tions with deploying air bags

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 16411 Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)

ISO/CD 9635-1 Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements

ISO/CD 9635-2 Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves

ISO/CD 9635-3 Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves

ISO/CD 9635-4 Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves

ISO/CD 9635-5 Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves

TC 27 Solid mineral fuels

ISO/CD 5074 Hard coal — Determination of Hardgrove grind-ability index

TC 29 Small tools

ISO/DTS 13399-2

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

ISO/DTS 13399-3

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

ISO/DTS 13399-4

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

ISO/DTS 13399-5

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

ISO/DTS 13399-50

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

ISO/DTS 13399-60

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

ISO/CD 9138 Abrasive grains — Sampling and splitting

TC 34 Food products

ISO/CD 6495-1 Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method

ISO/CD 12966-1

Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on gas chromatography

TC 38 Textiles

ISO/CD 13629-2

Determination of antifungal axctivity of textile products — Part 2: Plate count method

ISO/CD 17299-5

Textiles — Determination of deodorant property — Part 5: Metal-oxide semiconductor sensors method

TC 39 Machine tools

ISO/CD 230-7 Test code for machine tools — Part 7: Geomet-ric accuracy of axes of rotation

ISO/CD TR 16907

Machine tools — Numerical compensation of geometric errors

TC 42 Photography

ISO/CD 18938 Imaging materials — Optical discs — Care and handling for extended storage

TC 45 Rubber and rubber products

ISO/CD 4097 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure

TC 46 Information and documentation

ISO/CD 5127 Information and documentation — Vocabulary

TC 58 Gas cylinders

ISO/CD 14456 Gas cylinders — Gas properties and associ-ated classification (FTSC) codes

TC 59 Buildings and civil engineering works

ISO/DTS 12720

Sustainability in buildings and civil engineering works — Guidelines for the application of the general principles on sustainability

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO/DTS 16901

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

TC 68 Financial services

ISO/CD 12812-2

Mobile Financial Services — Part 2: Secu-rity and data protection for mobile financial services

ISO/CD 12812-3

Mobile Financial Services — Part 3: Financial application management

2 ISO Update, Supplement to ISO Focus -- April 2013

ISO/CD 12812-4

Mobile Financial Services — Part 4: Mobile Person-to-Person Payments

TC 102 Iron ore and direct reduced iron

ISO/CD 11536 Iron ores — Determination of loss on ignition — Gravimetric method

TC 106 Dentistry

ISO/CD 3630-3 Dental root-canal instruments — Part 3: Con-densers, pluggers and spreaders

TC 110 Industrial trucks

ISO/CD 10896-2

Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks

TC 121 Anaesthetic and respiratory equipment

ISO/CD 18190 Anaesthetic and respiratory equipment — General requirements for airways and related equipment

TC 122 Packaging

ISO/CD 17451-1

Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments — Part 1: Titre manque

TC 130 Graphic technology

ISO/CD 16760 Preparation and visualization of RGB images to be used in RGB-based graphic arts workflows

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DTR 4191 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation

ISO/CD 6259-1 Thermoplastics pipes — Determination of ten-sile properties — Part 1: General test method

ISO/CD 6259-3 Thermoplastics pipes — Determination of ten-sile properties — Part 3: Polyolefin pipes

TC 142 Cleaning equipment for air and other gases

ISO/CD 16891 Test methods for evaluating the durability of the cleanable dust control filter media

TC 150 Implants for surgery

ISO/CD 5840-2 Cardiovascular implants — Cardiac valve pros-theses — Part 2: Surgically implanted valve substitutes

ISO/CD 7198 Cardiovascular implants — Tubular vascular prostheses

ISO/CD 11491 Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses

ISO 27186:2010/CD Amd 1

Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements — Amendment 1

ISO/DTR 16379

Tissue-engineered medical products — Evalu-ation of anisotropic structure of articular carti-lage using DT (Diffusion Tensor)-MR Imaging

TC 159 Ergonomics

ISO/CD 24505 Ergonomics — Accessible design — Method for creating colour combinations taking ac-count of age-related changes in human colour vision

TC 163 Thermal performance and energy use in the built environment

ISO/CD 10077-2

Thermal performance of windows, doors and shutters — Calculation of thermal transmit-tance — Part 2: Numerical method for frames

TC 165 Timber structures

ISO/CD 16598 Timber structures — Structural classification for sawn timber

TC 171 Document management applications

ISO/CD TR 17797

Electronic archiving - Selection of digital stor-age media for long term preservation

TC 172 Optics and photonics

ISO/CD 17123-8

Optics and optical instruments — Field proce-dures for testing geodetic and surveying instru-ments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)

ISO/CD 18259 Ophthalmic optics — Contact lens care prod-ucts — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms

TC 173 Assistive products for persons with disability

ISO/CD 17966 Assistive products for personal hygiene

TC 184 Automation systems and integration

ISO/CD 8000-8 Data quality — Part 8: Information and data quality: Concepts and measuring

TC 189 Ceramic tile

ISO/CD 16575 Test methods and specifications for Cementi-tious Backer Units (CBUs)

TC 193 Natural gas

ISO/DTR 22302

Natural gas — Calculation of methane number

TC 207 Environmental management

ISO/CD 14001 Environmental management systems — Re-quirements with guidance for use

TC 234 Fisheries and aquaculture

ISO/CD 16488 Marine finfish farms — Requirement for infra-structure, dimensioning, design, installation, operation and management of open net cage systems

CASCO Committee on conformity assessment

ISO/IEC DTS 17021-4

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management

JTC 1 Information technology

ISO/IEC CD 30101

Information technology — Sensor Networks: Sensor Network and its interfaces for smart grid system

ISO/IEC CD 30128

Information technology — Sensor Networks — Generic Sensor Network Application Interface

ISO/IEC PDTR 29181-5

Information technology — Future Network — Problem statement and requirements — Part 5: Security

ISO/IEC CD 24748-5

Systems and software engineering — Life cycle management — Part 5: Software development planning

ISO/IEC CD 29155-3

Systems and software engineering — Informa-tion technology project performance bench-marking framework — Part 3: Guidance for reporting

ISO/IEC CD 17839-2

Information technology — Identification cards — Biometric system on card — Part 2: Physical characteristics

ISO/IEC CD 30129

Application of equipotential bonding and earth-ing in buildings with information technology equipment

ISO/IEC CD 24734

Information technology — Office equip-ment — Method for measuring digital printing productivity


DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 6 Paper, board and pulps

ISO/DIS 12625-7.2

* Tissue paper and tissue prod-ucts — Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight)

2013-05-15

(Revision of ISO 12625-7:2007)

TC 8 Ships and marine technology

ISO/DIS 16554.2

Ships and marine technology — Marine environment protection — Measurement and reporting of underwater sound radiated from merchant ships

2013-05-16

ISO/DIS 18421 * Ships and marine technology - Inland navigation vessels - Lifebuoy housings

2013-06-22

ISO/DIS 18422 * Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons

2013-06-22

TC 17 Steel

ISO/DIS 683-17

* Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels

2013-08-29


ISO/DIS 16124 * Steel wire rod — Dimensions and tolerances 2013-06-19

(Revision of ISO 16124:2004)


ISO/DIS 10327 * Air cargo - Main deck containers - Design and testing 2013-06-19


ISO/DIS 16691 * Space systems — Thermal Control Coatings for satel-lites and spacecraft — General requirements

2013-06-26

TC 22 Road vehicles

ISO/DIS 8820-3

* Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

2013-06-22


ISO/DIS 11452-8

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields

2013-07-01


ISO/DIS 13674-2

* Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test

2013-06-09


ISO/DIS 12405-3

* Electrically propelled road vehi-cles - Test specification for Lith-ium-ion traction battery packs and systems — Part 3: Safety performance requirements

2013-06-23


ISO/DIS 16119-4

* Agricultural and forestry machin-ery — Environmental require-ments for sprayers — Part 4: Fixed and semi-mobile sprayers

2013-08-29

ISO/DIS 16122-4

* Agricultural and forestry ma-chines — Inspection of sprayers and liquid fertilizer distributors in use — Part 4: Fixed and semi mobile sprayers

2013-08-29

ISO/DIS 11783-12

* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 12: Diag-nostics services

2013-06-04


TC 24 Particle characterization including sieving

ISO/DIS 13099-3

* Methods for zeta potential determination — Part 3: Acoustic methods

2013-06-26

TC 34 Food products

ISO/DIS 16779 * Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs

2013-06-30

TC 44 Welding and allied processes

ISO/DIS 5826.2

* Resistance welding equipment — Transformers — General specifications applicable to all transformers

2013-05-22


ISO/DIS 9453 * Soft solder alloys — Chemical compositions and forms 2013-08-29



ISO/DIS 8030 * Rubber and plastics hoses — Method of test for flammability 2013-08-29


ISO/DIS 11346 * Rubber, vulcanized or thermo-plastic — Estimation of life-time and maximum temperature of use

2013-06-30


ISO/DIS 17403 * Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration (cyanide-free method)

2013-06-16


ISO/DIS 3302-1

* Rubber — Tolerances for products — Part 1: Dimensional tolerances

2013-06-19

(Revision of ISO 3302-1:1996, ISO 3302-1:1996/Amd 1:2001)


ISO/DIS 25577 * Information and documentation — MarcXchange 2013-06-29


TC 54 Essential oils

ISO/DIS 16928 * Essential oil of ginger [Zingiber officinale Rosc.] 2013-06-30

TC 58 Gas cylinders

ISO/DIS 21172-1

* Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construc-tion — Part 1: Capacities up to 1 000 litres

2013-06-16

TC 59 Buildings and civil engi-neering works

ISO/DIS 11617 * Buildings and Civil Engineering Works - Sealants - Determina-tion of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weather-ing and mechanical cycling

2013-06-16

ISO/DIS 15686-4

* Building Construction - Service Life Planning — Part 4: Service Life Planning using Building Information Modelling

2013-06-16

TC 61 Plastics

ISO/DIS 11358-3.2

* Plastics — Thermogravimetry (TG) of polymers — Part 3: De-termination of the activation en-ergy using the Ozawa-Friedman plot and analysis of the reaction kinetics

2013-05-20

ISO/DIS 15512 * Plastics — Determination of water content 2013-08-29


ISO/DIS 22007-2

* Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

2013-08-29


ISO/DIS 4895 * Plastics — Liquid epoxy resins — Determination of tendency to crystallize

2013-08-29


ISO/DIS 15028 * Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine

2013-06-30


ISO/DIS 21048 * Plastics — Epoxy resins — De-termination of 1,2-glycol content 2013-06-04


ISO/DIS 25761 * Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen

2013-06-30


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 16904 * Petroleum and natural gas indus-tries - Design and testing of LNG marine transfer arms for conven-tional onshore terminals

2013-08-15

ISO/DIS 19901-8

* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 8: Marine soil Investigations

2013-08-22

TC 83 Sports and recreational equipment

ISO/DIS 23537 * Requirements for sleeping bags2013-08-22

TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/DIS 11665-10

* Measurement of radioactiv-ity in the environment — Air: radon-222 — Part 10: Determi-nation of diffusion coefficient in waterproof materials using activ-ity concentration measurement

2013-06-29

TC 106 Dentistry

ISO/DIS 7494-2

* Dentistry — Dental units — Part 2: Media channels and connections

2013-08-29

(Revision of ISO 11144:1995, ISO 7494-2:2003)

TC 112 Vacuum technology

ISO/DIS 3529-3

* Vacuum technology — Vocabu-lary — Part 3: Vacuum gauges 2013-06-18


TC 121 Anaesthetic and respiratory equipment

IEC/DIS 60601-1-12.2

Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance - Collateral Stand-ard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment

2013-06-29

ISO/DIS 80601-2-70

* Medical Electrical Equip-ment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apneoa breathing therapy equipment

2013-08-29



ISO/DIS 12647-3.2

Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint

2013-05-12


TC 131 Fluid power systems

ISO/DIS 3320 * Fluid power systems and com-ponents - Cylinder bores and piston rod diameters and area ratios - Metric series

2013-06-16


(Revision of ISO 3320:1987, ISO 7181:1991)

ISO/DIS 18413 * Hydraulic fluid power — Cleanli-ness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting

2013-06-04


TC 145 Graphical symbols

ISO 7010:2011/DAmd 168

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 168: Safety sign W037: Warning; Run over by remote operator controlled machine

2013-06-16

ISO 7010:2011/DAmd 169

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 169: Safety sign P009: No climbing

2013-06-16

ISO 7010:2011/DAmd 170

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 170: Safety sign M047: Use self-contained breathing appliance

2013-06-16

ISO 7010:2011/DAmd 171

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 171: Safety sign M046: Secure gas cylinders

2013-06-16

ISO 7010:2011/DAmd 173

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 173: Safety sign E035: Liferaft knife

2013-06-16

ISO 7010:2011/DAmd 174

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 174: Safety sign E059: Escape ladder

2013-06-16

ISO 7010:2011/DAmd 175

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 175: Safety sign E060: Evacuation chair

2013-06-16

ISO 7010:2011/DAmd 176

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 176: Safety sign M048: Use gas detector

2013-06-16

ISO 7010:2011/DAmd 177

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 177: Safety sign M049: Wear protective roller sport equipment

2013-06-16

ISO 7010:2011/DAmd 178

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 178: Safety sign P039: Hot works prohibited

2013-06-16


ISO/DIS 11663 * Quality of dialysis fluid for hae-modialysis and related therapies 2013-06-23


ISO/DIS 13958 * Concentrates for haemodialysis and related therapies 2013-06-23


ISO/DIS 13959 * Water for haemodialysis and related therapies 2013-06-23


ISO/DIS 23500 * Guidance for the preparation and quality management of fluids for haemodialysis and related therapies

2013-06-23


ISO/DIS 26722 * Water treatment equipment for haemodialysis applications and related therapies

2013-06-23


TC 154 Processes, data ele-ments and documents in commerce, industry and administration

ISO/DIS 9735-10

* Electronic data interchange for administration, commerce and transport (EDIFACT) — Applica-tion level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories

2013-06-19


TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO/DIS 23551-6

* Safety and control devices for gas burners and gas-burning appliances - Particular require-ments — Part 6: Thermoelectric flame supervision controls

2013-06-22

TC 163 Thermal performance and energy use in the built environment

ISO/DIS 9972 * Thermal performance of build-ings — Determination of air permeability of buildings — Fan pressurization method

2013-08-15

(Revision of ISO 9972:2006, ISO 9972:2006/Amd 1:2009)

TC 164 Mechanical testing of metals

ISO/DIS 6506-1

* Metallic materials — Brinell hard-ness test — Part 1: Test method 2013-08-08


ISO/DIS 6506-2

* Metallic materials — Brinell hardness test — Part 2: Verifica-tion and calibration of testing machines

2013-08-08


ISO/DIS 6506-3

* Metallic materials — Brinell hard-ness test — Part 3: Calibration of reference blocks

2013-08-08


ISO/DIS 6506-4

* Metallic materials — Brinell hardness test — Part 4: Table of hardness values

2013-08-08


ISO/DIS 6508-1

* Metallic materials — Rockwell hardness test — Part 1: Test method

2013-08-15


ISO/DIS 6508-2

* Metallic materials — Rockwell hardness test — Part 2: Verifica-tion and calibration of testing machines and indenters

2013-08-15



ISO/DIS 6508-3

* Metallic materials — Rockwell hardness test — Part 3: Calibra-tion of reference blocks

2013-08-15


ISO/DIS 16859-1

* Metallic materials — Leeb hard-ness test — Part 1: Test method 2013-08-08

ISO/DIS 16859-2

* Metallic materials — Leeb hard-ness test — Part 2: Verification and calibration of the testing devices

2013-08-08

ISO/DIS 16859-3

* Metallic materials — Leeb hard-ness test — Part 3: Calibration of reference test blocks

2013-08-08


ISO/DIS 12122-1

* Timber structures — Determina-tion of Characteristic values — Part 1: Basic requirements

2013-06-16

(Revision of ISO/PWI 12122)

ISO/DIS 12122-2

* Timber structures — Determina-tion of Characteristic values — Part 2: Sawn timber

2013-06-16

(Revision of ISO/PWI 12122)


ISO/DIS 8038 * Microscopes — Screw threads for objectives and related nosepieces

2013-06-12


TC 173 Assistive products for per-sons with disability

ISO/DIS 7176-22

* Wheelchairs - Technical sys-tems and aids for disabled or handicapped persons — Part 22: Set-up procedures

2013-06-26


TC 181 Safety of toys

ISO/DIS 8124-5

* Safety of toys — Part 5: Deter-mination of total concentration of certain elements in toys

2013-06-26

ISO/DIS 8124-6

* Safety of toys — Part 6: Toys and children's products — Determination of phthalate plasticizers in polyvinyl chloride plastics

2013-06-19

TC 198 Sterilization of health care products

ISO 11607-1:2006/DAmd 1

* Packaging for terminally steri-lized medical devices — Part 1: Requirements for materials, ster-ile barrier systems and packag-ing systems — Amendment 1

2013-08-15

ISO 11607-2:2006/DAmd 1

* Packaging for terminally steri-lized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1

2013-08-15

TC 201 Surface chemical analysis

ISO/DIS 13083 * Surface chemical analysis - Scanning Probe Microscopy- Standards on the definition and calibration of spatial resolution of Scanning Spreading Resist-ance Microscopy and Scanning Capacitance Microscopy

2013-06-19

TC 204 Intelligent transport systems

ISO/DIS 17572-1

* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model

2013-06-24


ISO/DIS 17572-2

* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile)

2013-06-24


ISO/DIS 17572-3

* Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile)

2013-06-24

(Revision of ISO 17572-3:2008, ISO 17572-3:2008/Cor 1:2009)

TC 206 Fine ceramics

ISO/DIS 17094 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for antibac-terial activity of semiconducting photocatalytic materials under indoor lighting environment

2013-06-19


ISO/DIS 14046 * Environmental management — Water footprint — Principles, requirements and guidelines

2013-06-19

TC 211 Geographic information/Geomatics

ISO/DIS 19147 * Geographic information — Transfer Nodes 2013-06-16

TC 213 Dimensional and geometri-cal product specifications and verification

ISO 1101:2012/DAmd 1

* Geometrical product specifica-tions (GPS) — Geometrical tol-erancing — Tolerances of form, orientation, location and run-out — Amendment 1

2013-08-29

TC 214 Elevating work platforms

ISO/DIS 18893 * Mobile elevating work platforms — Safety principles, inspection, maintenance and operation

2013-06-16


TC 220 Cryogenic vessels

ISO/DIS 21029-2

* Cryogenic vessels — Transport-able vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements

2013-06-24


TC 238 Solid biofuels

ISO/DIS 16993 * Solid biofuels — Conversion of analytical results from one basis to another

2013-08-15

ISO/DIS 16994 * Solid biofuels — Determination of total content of sulphur and chlorine

2013-08-15

ISO/DIS 16995 * Solid biofuels — Determination of the water soluble content of chloride, sodium and potassium

2013-08-15

TC 247 Fraud countermeasures and controls


ISO/DIS 34001 * Security Management System2013-06-26

TC 249 Traditional chinese medicine

ISO/DIS 17218 * Sterile acupuncture needles for single use 2013-06-19


ISO/IEC DIS 24771

* MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment

2013-06-23

(Revision of ISO/IEC 24771:2009)

ISO/IEC DIS 15026-1

* Systems and software engineer-ing — Systems and software assurance — Part 1: Concepts and vocabulary

2013-06-19

(Revision of ISO/IEC TR 15026-1:2010)

ISO/IEC 15414:2006/DAmd 1

* Information technology — Open distributed processing — Ref-erence model — Enterprise language — Amendment 1: ODP — The expression of Obligations and Policies

2013-06-16

ISO/IEC DIS 25051

* Software engineering — Soft-ware product Quality Require-ments and Evaluation (SQuaRE) — Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing

2013-06-23

(Revision of ISO/IEC 25051:2006, ISO/IEC 25051:2006/Cor 1:2007)

ISO/IEC DIS 25063.3

* Systems and software engineer-ing — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description

2013-05-21

ISO/IEC DIS 29121

* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks

2013-06-30

(Revision of ISO/IEC 29121:2009)

ISO/IEC DIS 14776-251

* Information technology -Small computer system interface (SCSI) — Part 251: USB at-tached SCSI (UAS)

2013-06-24

ISO/IEC 13818-1/DAmd 3

* Information technology — Ge-neric coding of moving pic-tures and associated audio information: Systems — Part 1: — Amendment 3: Transport of HEVC video over MPEG-2 systems

2013-06-22

ISO/IEC DIS 23000-13

* Information technology - Mul-timedia application format (MPEG-A) — Part 13: Augment-ed reality application format

2013-06-12

ISO/IEC DIS 23005-7

* Information technology — Me-dia context and control — Part 7: Conformance and reference software

2013-06-25

(Revision of ISO/IEC 23005-7:2011)

ISO/IEC DIS 23009-2

* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 2: Con-formance and reference software

2013-06-23

ISO/IEC 19788-1:2011/DAmd 1

* Information technology — Learn-ing, education and training — Metadata for learning resources — Part 1: Framework — Amend-ment 1

2013-06-19

ISO/IEC DIS 19794-7

* Information technology — Bio-metric data interchange formats — Part 7: Signature/sign time series data

2013-06-23

(Revision of ISO/IEC 19794-7:2007, ISO/IEC 19794-7:2007/Cor 1:2009)

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

CIE International Commission on Illumination

ISO/FDIS 11664-6

Colorimetry — Part 6: CIEDE2000 Colour-difference formula

2013-08-29

TC 4 Rolling bearings

ISO/FDIS 3290-1

* Rolling bearings — Balls — Part 1: Steel balls 2013-05-07

(Revision of ISO 3290-1:2008, ISO 3290-1:2008/Cor 1:2009)

ISO/FDIS 3290-2

* Rolling bearings — Balls — Part 2: Ceramic balls 2013-05-07



ISO/FDIS 3037 * Corrugated fibreboard — Deter-mination of edgewise crush re-sistance (unwaxed edge method)

2013-06-15


TC 10 Technical product documentation

ISO/FDIS 128-15

* Technical product documenta-tion (TPD) — General principles of presentation — Part 15: Pres-entation of shipbuilding drawings

2013-05-26

ISO/FDIS 128-24

* Technical drawings — General principles of presentation — Part 24: Lines on mechanical engi-neering drawings

2013-05-16


ISO/FDIS 129-4

* Technical product documenta-tion (TPD) — Indication of di-mensions and tolerances — Part 4: Dimensioning of shipbuilding drawings

2013-05-26


TC 17 Steel

ISO/FDIS 377 * Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

2013-05-29

(Revision of ISO 377:1997, ISO 377:1997/Cor 1:1997)

ISO/FDIS 404 * Steel and steel products — General technical delivery requirements

2013-05-29


ISO/FDIS 10474

* Steel and steel products — In-spection documents 2013-05-29



ISO/FDIS 6517 * Air cargo — Certified lower deck containers — Design and testing 2013-05-26


TC 22 Road vehicles

ISO/FDIS 18669-1

* Internal combustion engines — Piston pins — Part 1: General specifications

2013-05-14


ISO/FDIS 13044-2

* Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface

2013-05-13

ISO/FDIS 23273-2

* Fuel cell road vehicles — Safety specifications — Part 2: Protec-tion against hydrogen hazards for vehicles fuelled with com-pressed hydrogen

2013-05-09


TC 27 Solid mineral fuels

ISO/FDIS 23499

* Coal — Determination of bulk density for the use in charging of coke ovens

2013-05-28


ISO/FDIS 1170 * Coal and coke — Calculation of analyses to different bases 2013-05-26


ISO/FDIS 11722

* Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen

2013-05-26


TC 34 Food products

ISO 7218:2007/FDAmd 1

* Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1

2013-05-15

TC 36 Cinematography

ISO/FDIS 4241 * Cinematography — Theatre projection leader, trailer and cue marks — Specifications

2013-05-26


TC 38 Textiles

ISO/FDIS 20743

* Textiles — Determination of antibacterial activity of textile products

2013-05-22


TC 43 Acoustics

ISO 2922:2000/FDAmd 1

* Acoustics — Measurement of airborne sound emitted by ves-sels on inland waterways and harbours — Amendment 1

2013-05-08


ISO/FDIS 12996

* Mechanical joining — Destruc-tive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints

2013-05-15


ISO/FDIS 18899

* Rubber — Guide to the calibra-tion of test equipment 2013-05-27


TC 58 Gas cylinders

ISO 11120:1999/FDAmd 1

* Gas cylinders — Refillable seam-less steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing — Amendment 1: Requirements for design of tubes for embrit-tling gases

2013-05-22

TC 61 Plastics

ISO/FDIS 13931

* Carbon fibre — Determination of volume resistivity 2013-05-26

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 14998

* Petroleum and natural gas indus-tries — Downhole equipment — Completion accessories

2013-05-22

TC 79 Light metals and their alloys

ISO/FDIS 7583 * Anodizing of aluminium and its alloys — Terms and definitions 2013-05-20


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/ASTM FDIS 51539

* Guide for use of radiation-sensi-tive indicators 2013-05-20

(Revision of ISO/ASTM 51539:2005)

ISO/ASTM FDIS 51939

* Practice for blood irradiation dosimetry 2013-05-20

(Revision of ISO/ASTM 51939:2005)

ISO/FDIS 13304-1

* Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles

2013-05-16

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 12311

* Personal protective equipment — Test methods for sunglasses and related eyewear

2013-05-29


ISO/FDIS 12312-1

* Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use

2013-05-29

ISO/FDIS 12609-1

* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 1: Specification for products

2013-05-12

ISO/FDIS 12609-2

* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 2: Guidance for use

2013-05-12

TC 96 Cranes

ISO/FDIS 16625

* Cranes and hoists — Selec-tion of wire ropes, drums and sheaves

2013-05-06

(Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)

TC 104 Freight containers

ISO/FDIS 1496-1

* Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes

2013-05-19

(Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO 1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)

TC 106 Dentistry

ISO/FDIS 21563

* Dentistry — Hydrocolloid im-pression materials 2013-05-22

(Revision of ISO 1563:1990, ISO 13716:1999, ISO 1564:1995)

TC 108 Mechanical vibration, shock and condition monitoring

ISO/FDIS 20958

* Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors

2013-05-08


ISO/FDIS 12647-7

* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data

2013-05-16


ISO/FDIS 16759

* Graphic technology — Quanti-fication and communication for calculating the carbon footprint of print media products

2013-05-16


ISO 10928:2009/FDAmd 1

* Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fit-tings — Methods for regression analysis and their use — Amend-ment 1

2013-05-16


ISO/FDIS 20032

* Method for evaluation of tensile properties of metallic superplas-tic materials

2013-05-14


ISO/FDIS 12110-1

* Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and re-porting requirements

2013-05-27

ISO/FDIS 12110-2

* Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduc-tion methods

2013-05-27

TC 182 Geotechnics

ISO 14688-1:2002/FDAmd 1

* Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1

2013-06-29

ISO 14688-2:2004/FDAmd 1

* Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification — Amendment 1

2013-06-29


IEC/FDIS 62264-1

Enterprise-control system integration — Part 1: Models and terminology

2013-05-09

(Revision of IEC 62264-1:2003)

IEC/FDIS 62264-2

Enterprise-control system inte-gration — Part 2: Objects and attributes for enterprise-control system integration

2013-05-09

(Revision of IEC 62264-2:2004)

TC 188 Small craft

ISO/FDIS 7840 * Small craft — Fire-resistant fuel hoses 2013-05-08


ISO/FDIS 8469 * Small craft — Non-fire-resistant fuel hoses 2013-05-08


ISO/FDIS 10088

* Small craft — Permanently installed fuel systems 2013-05-08


TC 189 Ceramic tile

ISO/FDIS 10545-9

* Ceramic tiles — Part 9: Determi-nation of resistance to thermal shock

2013-05-29


TC 190 Soil quality

ISO/FDIS 17380

* Soil quality — Determination of total cyanide and easily liberat-able cyanide — Continuous-flow analysis method

2013-05-08



ISO 11137-1:2006/FDAmd 1

* Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medi-cal devices — Amendment 1

2013-05-29



ISO/FDIS 15623

* Intelligent Transport Systems — Forward vehicle collision warning systems — Performance require-ments and test procedures

2013-05-26


TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 2538-1

* Geometrical product specifica-tions (GPS) — Wedges — Part 1: Series of angles and slopes

2013-05-29


ISO/FDIS 2538-2

* Geometrical product specifica-tions (GPS) — Wedges — Part 2: Dimensioning and tolerancing

2013-05-29



ISO/IEC FDIS 18180

* Information technology — Speci-fication for the Extensible Con-figuration Checklist Description Format (XCCDF) Version 1.2

2013-05-09

ISO/IEC FDIS 21000-21

* Information technology — Mul-timedia framework (MPEG-21) — Part 21: Media Contract Ontology

2013-05-23


* Information technology — MPEG systems technologies — Part 8: Coding-independent code points

2013-05-28


* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 4: Segment encryption and authentication

2013-05-28


* Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

2013-05-16

Standards published

New International Standards published between 01 March and 31 March 2013


** French version of standard previously published in English only

Price group

IIW International Institute of Welding

ISO 14346:2013

* Static design procedure for welded hollow-section joints — Recommendations

U

TC 2 Fasteners

ISO 4034:2012/Cor 1

Hexagon regular nuts (style 1) — Prod-uct grade C — Technical Corrigendum 1

free

ISO 7719:2012/Cor 1

Prevailing torque type all-metal hexa-gon regular nuts — Property classes 5, 8 and 10 — Technical Corrigendum 1

free

ISO 10511:2012/Cor 1

Prevailing torque type hexagon thin nuts (with non-metallic insert) — Tech-nical Corrigendum 1

free


ISO 12625-11:2012

Tissue paper and tissue products — Part 11: Determination of wet ball burst strength

E

TC 8 Ships and marine technology

ISO 16304:2013

* Ships and marine technology — Marine environment protection — Arrange-ment and management of port waste reception facilities

L

ISO 16446:2013

* Ships and marine technology — Ma-rine environment protection — Adapter for joining dissimilar boom connectors

C

TC 17 Steel

ISO 14404-1:2013

* Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace

M

ISO 14404-2:2013

* Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2: Steel plant with electric arc furnace (EAF)

K


ISO 13832:2013

* Aerospace — Wire, aluminium alloy and copper-clad aluminium conductors — General performance requirements

F

ISO 16049-1:2013

* Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods

K

TC 22 Road vehicles

ISO 11451-4:2013

Road vehicles — Vehicle test methods for electrical disturbances from narrow-band radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

D

ISO 14229-1:2013

* Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements

XC

ISO 14229-6:2013

* Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diag-nostic services on K-Line implementa-tion (UDSonK-Line)

E

ISO 14230-2:2013

* Road vehicles — Diagnostic commu-nication over K-Line (DoK-Line) — Part 2: Data link layer

U

ISO 12345:2013

* Diesel engines — Cleanliness assess-ment of fuel injection equipment R

ISO 14451-1:2013

* Pyrotechnic articles — Pyrotech-nic articles for vehicles — Part 1: Terminology

G

ISO 14451-2:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 2: Test methods

M

ISO 14451-3:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 3: Labelling C

ISO 14451-4:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 4: Require-ments and categorization for micro gas generators

B

ISO 14451-5:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 5: Require-ments and categorization for airbag gas generators

C


ISO 14451-6:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 6: Require-ments and categorization for airbag modules

C

ISO 14451-7:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 7: Require-ments and categorization for seatbelt pretensioners

B

ISO 14451-8:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 8: Require-ments and categorization for igniters

B

ISO 14451-9:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 9: Require-ments and categorization for actuators

B

ISO 14451-10:2013

Pyrotechnic articles — Pyrotech-nic articles for vehicles — Part 10: Requirements and categorization for semi-finished products

A

TC 29 Small tools

ISO 525:2013 Bonded abrasive products — General requirements G

ISO 23480:2013

Tools for pressing — Sliding platesC

ISO 5609-1:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimen-sions and calculation for corrections

L

ISO 5609-2:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F

D

ISO 5609-3:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K

D

ISO 5609-4:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L

D

ISO 5609-5:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U

D

ISO 5609-6:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q

D

TC 34 Food products

ISO 6887-6:2013

Microbiology of food and animal feed — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 6: Specific rules for the preparation of samples taken at the primary produc-tion stage

E

ISO/TS 15216-1:2013

Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification

P

ISO/TS 15216-2:2013

Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 2: Method for qualitative detection

N

ISO 21571:2005/Amd 1:2013

Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Nucleic acid extraction — Amendment 1

XZ

TC 35 Paints and varnishes

ISO 11890-2:2013

Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatograph-ic method

J

ISO 15110:2013

Paints and varnishes — Artificial weathering including acidic deposition G

TC 38 Textiles

ISO 105-E01:2013

Textiles — Tests for colour fastness — Part E01: Colour fastness to water C

ISO 105-E02:2013

Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water C

ISO 105-E04:2013

Textiles — Tests for colour fast-ness — Part E04: Colour fastness to perspiration

C

TC 41 Pulleys and belts (including veebelts)

ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Require-ments and test method

D

ISO 21178:2013

Light conveyor belts — Determination of electrical resistances K

ISO 21179:2013

Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt

C

TC 42 Photography

ISO 2721:2013 * Photography — Film-based cameras — Automatic controls of exposure F

ISO 18927:2013

* Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and rela-tive humidity

M

TC 43 Acoustics

ISO/PAS 11819-4:2013

* Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 4: SPB method using backing board

E


ISO 15012-1:2013

Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: Requirements for testing and mark-ing of separation efficiency

G

ISO/TR 15608:2013

Welding — Guidelines for a metallic materials grouping system D

ISO 15609-6:2013

Specification and qualification of weld-ing procedures for metallic materials — Welding procedure specification — Part 6: Laser-arc hybrid welding

E


ISO 3384-1:2011/Amd 1:2013

Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature — Amendment 1: Revised calibration schedule

XZ


ISO 25964-2:2013

* Information and documentation — Thesauri and interoperability with other vocabularies — Part 2: Interoperability with other vocabularies

X

TC 54 Essential oils


ISO 4719:2012 Essential oil of spike lavender (Lavan-dula latifolia Medikus), Spanish type D

ISO 4731:2012 Essential oil of geranium (Pelargonium x ssp.) E

TC 58 Gas cylinders

ISO 11114-2:2013

Gas cylinders — Compatibility of cylin-der and valve materials with gas con-tents — Part 2: Non-metallic materials

G


ISO 16354:2013

* Guidelines for knowledge libraries and object libraries W

TC 61 Plastics

ISO 11357-5:2013

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determina-tion of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

E

ISO 307:2007/Amd 1:2013

Plastics — Polyamides — Determina-tion of viscosity number — Amend-ment 1: Corrections, and update to reference to JIS K 6920-2

XZ

ISO 12817:2013

* Fibre-reinforced plastic composites — Determination of open-hole compres-sion strength

J

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 13628-5:2009

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals

XC

ISO 14692-2:2002

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture

X

TC 69 Applications of statistical methods

ISO 7870-2:2013

* Control charts — Part 2: Shewhart control charts S

ISO 11843-6:2013

* Capability of detection — Part 6: Meth-odology for the determination of the critical value and the minimum detect-able value in Poisson distributed meas-urements by normal approximations

K

TC 70 Internal combustion engines

ISO 8528-5:2013

Reciprocating internal combustion en-gine driven alternating current generat-ing sets — Part 5: Generating sets

R


ISO 5902:2013 Alpine skis — Determination of elastic properties E

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO/ASTM 51261:2013

* Practice for calibration of routine dosimetry systems for radiation processing

J

ISO/ASTM 51631:2013

* Practice for use of calorimetric dosim-etry systems for electron beam dose measurements and dosimetery system calibrations

E

ISO/ASTM 51702:2013

* Practice for dosimetry in a gamma facility for radiation processing D

ISO/ASTM 51940:2013

* Guide for dosimetry for sterile insects release programs F

ISO/ASTM 52116:2013

* Practice for dosimetry for a self-con-tained dry-storage gamma irradiator F

TC 92 Fire safety

ISO 14934-2:2013

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

T

ISO/TS 13447:2013

* Fire safety engineering — Guidance for use of fire zone models K

TC 94 Personal safety -- Protective clothing and equipment

ISO 20471:2013

High visibility clothing — Test methods and requirements L

TC 98 Bases for design of structures

ISO 3898:2013 * Bases for design of structures — Names and symbols of physical quan-tities and generic quantities

S

TC 106 Dentistry

ISO 6873:2013 Dentistry — Gypsum productsK

ISO 1797-3:2013

Dentistry — Shanks for rotary instru-ments — Part 3: Shanks made of ceramics

D

ISO 16635-1:2013

* Dentistry — Dental rubber dam tech-nique — Part 1: Hole punch B

TC 108 Mechanical vibration, shock and condition monitoring

ISO 18436-8:2013

* Condition monitoring and diagnostics of machines — Requirements for quali-fication and assessment of personnel — Part 8: Ultrasound

E


ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge

G

ISO 27893:2011

Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct com-parison with a reference gauge

H

TC 117 Fans

ISO 12759:2010/Amd 1:2013

Fans — Efficiency classification for fans — Amendment 1 XZ

TC 119 Powder metallurgy

ISO 4492:2013 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering

D

TC 122 Packaging

ISO 13127:2012/Cor 1:2012

Packaging — Child resistant packaging — Mechanical test methods for reclos-able child resistant packaging systems — Technical Corrigendum 1

free


ISO/TR 16218:2013

* Packaging and the environment — Processes for chemical recovery F

TC 126 Tobacco and tobacco products

ISO 10315:2013

Cigarettes — Determination of nicotine in smoke condensates — Gas-chroma-tographic method

D

TC 127 Earth-moving machinery

ISO 7133:2013 * Earth-moving machinery — Scrap-ers — Terminology and commercial specifications

K


ISO 14540:2013

* Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)

C

ISO 14541:2013

* Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose

C

ISO/TR 17209:2013

Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads

F

TC 142 Cleaning equipment for air and other gases

ISO 10121-2:2013

Test methods for assessing the perfor-mance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)

R

ISO 29462:2013

Field testing of general ventilation filtra-tion devices and systems for in situ removal efficiency by particle size and resistance to airflow

S

TC 146 Air quality

ISO 13833:2013

Stationary source emissions — De-termination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide — Radiocarbon sampling and determination

R

ISO 16911-1:2013

Stationary source emissions — Manual and automatic determination of veloc-ity and volume flow rate in ducts — Part 1: Manual reference method

X

ISO 16911-2:2013

Stationary source emissions — Manual and automatic determination of veloc-ity and volume flow rate in ducts — Part 2: Automated measuring systems

U

ISO 25597:2013

* Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cy-clone samplers and sample dilution

V

TC 147 Water quality

ISO 27108:2010

Water quality — Determination of selected plant treatment agents and biocide products — Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)

R

ISO 5667-3:2012

Water quality — Sampling — Part 3: Preservation and handling of water samples

S


ISO 5840-3:2013

Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques

XA

ISO 8637:2010/Amd 1:2013

* Cardiovascular implants and extra-corporeal systems — Haemodialys-ers, haemodiafilters, haemofilters and haemoconcentrators — Amendment 1: Revision to Figure 2 — Main fitting dimensions of dialysis fluid inlet and outlet ports

XZ

TC 155 Nickel and nickel alloys

ISO 11433:1993/Amd 1:2013

* Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method — Amendment 1: Alternative procedure for the preparation of the titanium standard solution

XZ

TC 156 Corrosion of metals and alloys

ISO 7539-1:2012

Corrosion of metals and alloys — Stress corrosion testing — Part 1: Gen-eral guidance on testing procedures

K

ISO 7539-10:2013

* Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method

F

ISO 13174:2012

Cathodic protection of harbour installations P

ISO 21601:2013

Corrosion of metals and alloys — Guidelines for assessing the sig-nificance of stress corrosion cracks detected in service

K

TC 159 Ergonomics

ISO 9241-154:2013

Ergonomics of human-system interac-tion — Part 154: Interactive voice response (IVR) applications

Q

TC 163 Thermal performance and en-ergy use in the built environment

ISO 12655:2013

* Energy performance of buildings — Presentation of measured energy use of buildings

G

ISO 18096:2013

* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of maximum service temperature for preformed pipe insulation

H


ISO/TR 18267:2013

* Timber structures — Review of design standards M


ISO/TR 16743:2013

* Optics and photonics — Wavefront sensors for characterising optical sys-tems and optical components

N

ISO 8600-1:2013

* Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements

G

ISO 11553-3:2013

Safety of machinery — Laser process-ing machines — Part 3: Noise reduc-tion and noise measurement methods for laser processing machines and hand-held processing devices and as-sociated auxiliary equipment (accuracy grade 2)

F

TC 178 Lifts, escalators and moving walks

ISO 22201-2:2013

* Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 2: Escalators and moving walks (PESSRAE)

M


ISO/TR 22201-3:2013

* Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for pro-grammable electronic systems related to PESSRAL and PESSRAE

E


ISO 16739:2013

* Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries

L

TC 188 Small craft

ISO 16180:2013

Small craft — Navigation lights — In-stallation, placement and visibility E

ISO 15027-1:2012

Immersion suits — Part 1: Constant wear suits, requirements including safety

J

ISO 15027-2:2012

Immersion suits — Part 2: Abandon-ment suits, requirements including safety

K

ISO 15027-3:2012

Immersion suits — Part 3: Test methods J

TC 190 Soil quality

ISO 13196:2013

Soil quality — Screening soils for se-lected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument

F

TC 195 Building construction machinery and equipment

ISO 15688:2012

Road construction and maintenance equipment — Soil stabilizers — Termi-nology and commercial specifications

J


ISO 13408-6:2005/Amd 1:2013

Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1

XZ

TC 201 Surface chemical analysis

ISO/TR 19319:2013

* Surface chemical analysis — Funda-mental approaches to determination of lateral resolution and sharpness in beam-based methods

XA


ISO 12855:2012/Cor 1:2013

* Electronic fee collection — Information exchange between service provision and toll charging — Technical Cor-rigendum 1

free

ISO/TS 13141:2010/Cor 1:2013

* Electronic fee collection — Localisa-tion augmentation communication for autonomous systems — Technical Corrigendum 1

free

ISO/TR 13184-1:2013

* Intelligent transport systems — Guid-ance protocol via personal ITS station for advisory safety systems — Part 1: General information and use case definitions

M

ISO 14906:2011/Cor 1:2013

* Electronic fee collection — Application interface definition for dedicated short-range communication — Technical Corrigendum 1

free

ISO/TS 17575-1:2010/Cor 1:2013

* Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging — Techni-cal Corrigendum 1

free

ISO/TS 17575-3:2011/Cor 1:2013

* Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data — Technical Corrigendum 1

free

ISO 26683-1:2013

* Intelligent transport systems — Freight land conveyance content identification and communication — Part 1: Context, architecture and referenced standards

X

TC 206 Fine ceramics

ISO 11894-1:2013

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measure-ment of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes

D

ISO 14574:2013

Fine ceramics (advanced ceramics, ad-vanced technical ceramics) - Mechani-cal properties of ceramic composites at high temperature - Determination of tensile properties

J

ISO 23146:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method

J


ISO 14065:2013

Greenhouse gases — Requirements for greenhouse gas validation and verifica-tion bodies for use in accreditation or other forms of recognition

N

TC 209 Cleanrooms and associated controlled environments

ISO 14644-10:2013

Cleanrooms and associated controlled environments — Part 10: Classifica-tion of surface cleanliness by chemical concentration

P

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO 15189:2012

Medical laboratories — Requirements for quality and competence T

ISO 19001:2013

In vitro diagnostic medical devices — Information supplied by the manufac-turer with in vitro diagnostic reagents for staining in biology

G

TC 215 Health informatics

ISO 13120:2013

Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML)

R

ISO/TS 13582:2013

* Health informatics — Sharing of OID registry information N


ISO/IEC 17568:2013

* Information technology — Telecom-munications and information ex-change between systems — Close proximity electric induction wireless communications

X

ISO/IEC 18092:2013

* Information technology — Telecom-munications and information exchange between systems — Near Field Com-munication — Interface and Protocol (NFCIP-1)

S

ISO/IEC 18450:2013

* Information technology — Telecom-munications and information exchange between systems — Web Services Description Language (WSDL) for CSTA Phase III

XC


ISO/IEC 19770-1:2012

Information technology — Software as-set management — Part 1: Processes and tiered assessment of conformance

W

ISO/IEC TR 24772:2013

* Information technology — Program-ming languages — Guidance to avoiding vulnerabilities in programming languages through language selection and use

XC

ISO/IEC TR 29108:2013

* Information technology — Terminology for intelligent homes W

ISO/IEC 24761:2009/Cor 1:2013

* Information technology — Security techniques — Authentication context for biometrics — Technical Corrigen-dum 1

free

ISO/IEC 29115:2013

* Information technology — Security techniques — Entity authentication assurance framework

R

ISO/IEC 29142-1:2013

* Information technology — Print cartridge characterization — Part 1: General: terms, symbols, notations and cartridge characterization framework

N

ISO/IEC 29142-2:2013

* Information technology — Print car-tridge characterization — Part 2: Car-tridge characterization data reporting

H

ISO/IEC 15444-11:2007/Amd 1:2013

* Information technology — JPEG 2000 image coding system: Wireless — Part 11: — Amendment 1: IP based wire-less networks

XZ

ISO/IEC 23005-6:2013

* Information technology — Media context and control — Part 6: Common types and tools

XB

ISO/IEC 23006-5:2013

* Information technology — Multimedia service platform technologies — Part 5: Service aggregation

U

ISO/IEC 15961-1:2013

* Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 1: Application interface

XB

ISO/IEC 15962:2013

* Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions

XC

ISO/IEC 29160:2012

Information technology — Radio fre-quency identification for item manage-ment — RFID Emblem

K

ISO/IEC 19794-9:2011/Amd 1:2013

* Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 1: Conformance testing methodology

XZ

ISO/IEC 19794-14:2013

* Information technology — Biometric data interchange formats — Part 14: DNA data

R

Standards confirmed

The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 16047:2005


ISO 129-1:2004


ISO 14950:2004 (reconfirmed)




TC 22 Road vehicles

ISO 10605:2008




ISO 6489-1:2001 (reconfirmed)



ISO 26322-1:2008


TC 30 Measurement of fluid flow in closed conduits


TC 34 Food products

ISO/TS 2963:2006 (reconfirmed)

ISO/TS 27105:2009

ISO/TS 27106:2009



TC 36 Cinematography


TC 38 Textiles


TC 39 Machine tools


ISO/TR 230-9:2005


TC 41 Pulleys and belts (including veebelts)



ISO 11193-1:2008

TC 48 Laboratory equipment













TC 63 Glass containers




TC 72 Textile machinery and accessories










ISO 28239:2008

ISO 363-1:2006

ISO 363-2:2006

ISO 366-4:2005

ISO 366-5:2006



ISO 7839:2005


ISO 8117:2003

ISO 8118-1:2006

ISO 8118-2:2006



ISO 8121:2007

ISO 8122:2003

ISO 8188:2007




ISO 9473-1:2006

ISO 9473-2:2006

ISO 10223:2005

ISO 11675:2005

ISO 13990-1:2006

ISO 13990-2:2006

ISO 13990-3:2006

ISO 14500:2003

ISO 15228:2005



TC 92 Fire safety

ISO 5925-1:2007

TC 94 Personal safety -- Protective clothing and equipment


TC 100 Chains and chain sprockets for power transmission and conveyors


TC 123 Plain bearings

ISO 12301:2007



ISO 3601-2:2008

ISO 3601-4:2008

ISO 6194-1:2007


TC 135 Non-destructive testing

ISO 11699-1:2008




TC 147 Water quality


TC 192 Gas turbines

ISO 2314:2009






TC 195 Building construction machinery and equipment

ISO 15878:2008

ISO 19433:2008

ISO 19452:2008

TC 211 Geographic information/Geomatics


ISO 19113:2002





ISO/IEC 7816-2:2007

ISO/IEC 10967-2:2001






















ISO/IEC 10561:1999

(reconfirmed)

ISO/IEC 14473:1999

(reconfirmed)


ISO/IEC 15404:2000

(reconfirmed)

ISO/IEC 15775:1999

(reconfirmed)

ISO/IEC TR 19797:2004

ISO/IEC 19799:2007

ISO/IEC 24700:2005

ISO/IEC TR 24705:2005

ISO/IEC 24712:2007

ISO/IEC TR 22250-1:2002

Standards withdrawn


TC 38 Textiles

ISO 2649:1974 (replaced by )





ISO 2788:1986 (replaced by ISO 25964-1:2011, ISO 25964-2:2013)

ISO 5964:1985 (replaced by ISO 25964-1:2011, ISO 25964-2:2013)


ISO 15686-6:2004 (replaced by )

TC 61 Plastics


TC 69 Applications of statistical methods

ISO 8258:1991 (replaced by ISO 7870-2:2013)

TC 70 Internal combustion engines


TC 84 Devices for administration of medicinal products and intravascular catheters



TC 108 Mechanical vibration, shock and condi-tion monitoring





ISO/PAS 16739:2005

(replaced by ISO 16739:2013)


ISO/TS 26683-1:2012

(replaced by ISO 26683-1:2013)


ISO/IEC 9594-10:2008

(replaced by )

Meeting calendar

(update at 01 March 2013)

* Information definite but meeting not yet formally convened

** Provisional

April 2013

2-5 Vienna (Austria) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection

4 Rotterdam (Netherlands)

TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

8-10 London (United Kingdom)

TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

8-12 Madrid (Spain) JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

8-12 Sydney (Australia)

PC 271 Compliance programs

9 Helsinki (Finland) TC 117 Fans

12 Gaithersburg (USA)

TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters

12 Paris (France) TC 92/SC 1 Fire safety/Fire initia-tion and growth

15 Peterbor-ough (United Kingdom)

TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests

15-16 Stuttgart (Germany)

TC 39/SC 4 Machine tools/Wood-working machines

15-19 Seattle (USA) TC 204 Intelligent transport systems

16-17 Peterbor-ough (United Kingdom)

TC 23/SC 14 Tractors and machin-ery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals

16-17 Frankfurt (Germany)

TC 48 Laboratory equipment

17-18 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes


17-18 Xian (China) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

19 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refriger-ants and refrigeration lubricants

20 Moscow (Rus-sian Federation)

TC 92/SC 3 Fire safety/Fire threat to people and environment

20 Moscow (Rus-sian Federation)

TC 92/SC 4 Fire safety/Fire safety engineering

21-23 Vancouver (Canada)

TC 34/SC 4 Food products/Cere-als and pulses

21-26 Mexico (Mexico) TC 215 Health informatics

22-26 Winches-ter (United Kingdom)

JTC 1/SC 37 Information technology/Biometrics

22-26 Berlin (Germany) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

23-24 Dresden (Germany)

TC 219 Floor coverings

25-26 Lünen (Germany) TC 82 Mining


TC 83/SC 5 Sports and recrea-tional equipment/Ice hockey equipment and facilities

25-26 New York (USA) ** TC 178 Lifts, escalators and moving walks

26 Pavia (Italy) TC 194 Biological evaluation of medical devices

26 Cape Town (South Africa)

TC 242 Energy Management

26-27 Clausthal-Zeller-feld (Germany)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

29-30 Sophia Antipolis (France)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

April-May 2013


PC 272 Forensic sciences

29-3 Calgary (Canada) TC 251 Project committee: Asset management

May 2013

2 Calgary (Canada) TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics

4 Sydney (Australia)

TC 110/SC 4 Industrial trucks/Rough-terrain trucks

7 Milan (Italy) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications

13 Berlin (Germany) TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials

13 Guangzhou (China)

TC 68/SC 2 Financial services/Financial Services, security


TC 68/SC 4 Financial services/Securities and related financial instruments

13-14 Brussels (Belgium)

TC 122/SC 4 Packaging/Packaging and environment

13-17 Tokyo (Japan) TC 114 Horology

13-17 Vienna (Austria) TC 171 Document manage-ment applications

14 Berlin (Germany) TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments


* TC 68/SC 7 Financial services/Core banking

14 Burr Ridge (USA) TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work

15 Santa María de Lamas (Portugal)

TC 87 Cork

15 Tokyo (Japan) TC 114/SC 6 Horology/Precious metal coverings

15 Tokyo (Japan) TC 114/SC 14

Horology/Table and wall clocks

15-16 Tokyo (Japan) TC 22/SC 1 Road vehicles/Ignition equipment

16 Hangzhou (China)

TC 10/SC 1 Technical product documentation/Basic conventions

16 Hangzhou (China)

TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

16 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding


TC 68 Financial services


TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

17 Hangzhou (China)


17 Berlin (Germany) TC 22/SC 10 Road vehicles/Impact test procedures

17 Berlin (Germany) TC 22/SC 12 Road vehicles/Pas-sive safety crash protection systems

17 Berlin (Germany) TC 29 Small tools

17 Burr Ridge (USA) TC 195 Building construc-tion machinery and equipment

19-24 Shenzen (China) TC 130 Graphic technology

20-23 Durban (South Africa)

TC 249 Traditional chinese medicine

21-24 Berlin (Germany) TC 43/SC 3 Acoustics/Underwa-ter acoustics


22 Vancouver (Canada)

TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

22 Stockholm (Sweden)

TC 145/SC 1 Graphical symbols/Public information symbols

22-23 La Valetta (Malta) * COPOLCO Committee on con-sumer policy


TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours


TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment

23-25 Moscow (Rus-sian Federation)

* TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology

24 Salzburg (Austria)

TC 89 Wood-based panels


TC 145 Graphical symbols

24 Delft (Netherlands)

TC 158 Analysis of gases

25-31 Montreal (Canada)

JTC 1/SC 7 Information technol-ogy/Software and systems engineering


* TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

27-31 Paris (France) * TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

27-31 Delft (Netherlands)

TC 223 Societal security

28-31 Helsinki (Finland) TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions

29 Bilbao (Spain) TC 147/SC 3 Water qual-ity/Radioactivity measurements

30-31 Busan (Korea, Republic of)

TC 211 Geographic in-formation/Geomatics

31 Shanghai (China) TC 4 Rolling bearings

31 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

31 Porto (Portugal) TC 228 Tourism and related services

June 2013

3-5 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables

3-5 Paris (France) TC 46/SC 9 Information and documentation/Identification and description

3-6 Milan (Italy) TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles

3-7 Auburn Hills (USA)

* TC 22/SC 21 Road vehicles/Electri-cally propelled road vehicles

3-7 Rotterdam (Netherlands)

TC 34/SC 5 Food products/Milk and milk products

3-7 McLean, Virginia (USA)

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

3-7 Copenhagen (Denmark)

TC 42 Photography

3-7 Paris (France) TC 46/SC 11 Information and doc-umentation/Archives/records management

3-7 Milwaukee (USA) ** TC 69 Applications of statis-tical methods

3-7 San Francisco (USA)

* TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

3-8 Warsaw (Poland) TC 96 Cranes

3-8 Paris (France) TC 184/SC 4 Automation systems and integration/Indus-trial data

4-5 Amsterdam (Netherlands)

TC 259 Project committee: Outsourcing

5 Berlin (Germany) TC 29/SC 5 Small tools/Grinding wheels and abrasives

5 Prague (Czech Republic)

** TC 115 Pumps

5-7 Paris (France) ** TC 46/SC 4 Information and documentation/Tech-nical interoperability

6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection

6-7 Milan (Italy) * TC 22/SC 17 Road vehicles/Visibility

6-7 Paris (France) TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


* TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

10-14 Tel Aviv (Israel) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

11 Geneva (Switzerland)

* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

11 Chantilly (USA) * TC 220 Cryogenic vessels

11-12 Brugge (Belgium) TC 17/SC 17 Steel/Steel wire rod and wire products

11-12 Burr Ridge (USA) TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort

11-13 Gothenburg (Sweden)

* TC 22 Road vehicles



REMCO Committee on refer-ence materials

12 Munich (Germany)

* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment

12-13 Burr Ridge (USA) TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors

12-13 Geneva (Switzerland)

* TMB Technical Manage-ment Board

13 Atlanta (USA) TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle

13 Berlin (Germany) TC 156 Corrosion of metals and alloys

13-14 Burr Ridge (USA) TC 23 Tractors and machin-ery for agriculture and forestry

13-14 Barcelona (Spain)

TC 91 Surface active agents

14 Pretoria (South Africa)

* TC 37/SC 1 Terminology and other language and content resources/Principles and methods


TC 37/SC 2 Terminology and other language and content resources/Terminographical and lexicographical work-ing methods


* TC 37/SC 3 Terminology and other language and content resources/Systems to manage terminology, knowl-edge and content


* TC 37/SC 4 Terminology and other language and content resources/Language resource management


* TC 37/SC 5 Terminology and other language and content resources/Translation, inter-preting and related technology

14 Paris (France) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

14-15 Atlanta (USA) TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

17-19 (Europe) ** TC 252 Project committee: Natural gas fuelling stations for vehicles

17-21 Seoul (Korea, Republic of)

JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

17-21 Bellevue (USA) JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

17-21 Shanghai (China) TC 121 Anaesthetic and res-piratory equipment

17-21 Berlin (Germany) ** TC 149 Cycles

18-19 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

18-19 Louvain-la-Neuve (Belgium)

TC 17/SC 11 Steel/Steel castings

18-19 Courbevoie, Paris (France)

TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

18-19 (Spain) ** TC 137 Footwear sizing des-ignations and marking systems

19 Porto de Galin-has (Brazil)

TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

19-20 Prague (Czech Republic)

TC 17/SC 12 Steel/Continuous mill flat rolled products


** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

24-26 Berlin (Germany) * TC 34/SC 9 Food products/Microbiology

24-26 Calgary (Canada) * TC 253 Project committee: Treated wastewater re-use for irrigation

24-27 Istanbul (Turkey) TC 189 Ceramic tile




* TC 193 Natural gas

24-28 Gaborone (Botswana)


25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate

26 Montreal (Canada)

* TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures

26-27 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

27 Montreal (Canada)

* TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes

27-28 Tokyo (Japan) TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems


TC 51 Pallets for unit load method of materials handling

28 Espoo (Helsinki) (Finland)

TC 188 Small craft


Washington, D.C (USA)

** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

July 2013

1-5 Bornholm (Denmark)

TC 268 Sustainable develop-ment in communities

2 Berlin (Germany) TC 274 Light and lighting

2-4 Bornholm (Denmark)

** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

15-17 Vienna (Austria) PC 273 Customer contact centres

15-19 Paris (France) * JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology

Notting-ham (United Kingdom)

** TC 261 Additive manufacturing

August 2013


* TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components

21-23 (USA) ** TC 134 Fertilizers and soil conditioners

26-30 (Canada) ** JTC 1/SC 35 Information technol-ogy/User interfaces

September 2013

3-6 Hangzhou (China)

* TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

8-9 Victoria (Canada) * TC 33 Refractories


* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

8-13 Suzhou (China) TC 61 Plastics


* TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

9-10 Paris (France) * TC 26 Copper and copper alloys

9-11 Gaithersburg (USA)

** TC 172/SC 9 Optics and photon-ics/Electro-optical systems

9-13 Delft (Netherlands)

* JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages


** TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

9-14 Stockholm (Sweden)

* TC 163 Thermal performance and energy use in the built environment

10 London (United Kingdom)

* TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

10 Paris (France) * TC 79/SC 11 Light metals and their alloys/Titanium

10-13 Vienna (Austria) ** TC 146/SC 6 Air quality/Indoor air


TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems


* TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components

11 Suzhou (China) * TC 61/SC 1 Plastics/Terminology

11 Suzhou (China) * TC 61/SC 2 Plastics/Mechanical properties

11 Suzhou (China) * TC 61/SC 4 Plastics/Burning behaviour

11 Suzhou (China) * TC 61/SC 5 Plastics/Physical-chemical properties

11 Suzhou (China) * TC 61/SC 10 Plastics/Cellular plastics

11 Suzhou (China) * TC 61/SC 11 Plastics/Products

11 Suzhou (China) * TC 61/SC 12 Plastics/Thermoset-ting materials

11 Paris (France) * TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

11-12 Stockholm (Sweden)

* TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)


* TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers

12 Suzhou (China) * TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance

12 Suzhou (China) * TC 61/SC 9 Plastics/Thermoplas-tic materials

12 Suzhou (China) * TC 61/SC 13 Plastics/Composites and reinforcement fibres

12 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

12 Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys


* TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)



* TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals


* TC 21 Equipment for fire protection and fire fighting

13 Paris (France) ** TC 79 Light metals and their alloys


TC 119 Powder metallurgy


* TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)

13 Frankfurt (Germany)

** TC 244 Industrial furnaces and associated pro-cessing equipment

15-20 Velsen (Netherlands)


16-17 St. Peters-burg (Russian Federation)

* DEVCO Committee on developing countries matters


* TMB Technical Manage-ment Board

16-20 Copenhagen (Denmark)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures


* TC 150 Implants for surgery

16-20 Fukuoka (Japan) * TC 190 Soil quality

16-20 Fukuoka (Japan) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

16-20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling

16-20 Fukuoka (Japan) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

16-20 Fukuoka (Japan) * TC 190/SC 4 Soil quality/Biological methods

16-20 Fukuoka (Japan) * TC 190/SC 7 Soil quality/Soil and site assessment

17 Paris (France) * TC 254 Safety of amusement rides and amusement devices

17-18 Belo Horizonte (Brazil)

** TC 155 Nickel and nickel alloys

17-19 Tokyo (Japan) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

17-19 Chengdu (China) * TC 256 Pigments, dyestuffs and extenders


* GA General Assembly

19 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases

19-20 Graz (Austria) * TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

21 St. Peters-burg (Russian Federation)

* COUNCIL Council

23-26 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing

23-27 Kobe (Japan) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

23-27 Milan (Italy) ** TC 120 Leather

23-27 Vienna (Austria) * TC 218 Timber

25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

26-27 Toulouse (France)

* TC 264 Fireworks

27 Seoul (Korea, Republic of)

** TC 44/SC 12 Welding and allied processes/Soldering materials

27 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing

27 Helsinki (Finland) * TC 213 Dimensional and geometrical product specifications and verification

St. Peters-burg (Russian Federation)

** CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

London (United Kingdom)

** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

13 Paris (France) ** TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots

13 Paris (France) ** TC 79/SC 7 Light metals and their alloys/Aluminium and cast aluminium alloys

13 Paris (France) ** TC 79/SC 9 Light metals and their alloys/Symbolization

(Germany) ** TC 180 Solar energy

Tokyo (Japan) ** TC 267 Facilities management

September-October 2013

30-4 (Sweden) ** JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment

October 2013

2-3 Tampere (Finland)

TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry

3-4 Chantilly (USA) * TC 58/SC 2 Gas cylinders/Cylin-der fittings

7 Istanbul (Turkey) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-8 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes


7-9 Tokyo (Japan) * TC 70 Internal combustion engines

7-9 Tokyo (Japan) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products

7-11 Beijing (China) * CASCO Committee on con-formity assessment

7-11 Istanbul (Turkey) * TC 38 Textiles

7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids

8 Istanbul (Turkey) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 8/SC 7 Ships and marine technology/Inland navigation vessels

9 Istanbul (Turkey) * TC 38/SC 23 Textiles/Fibres and yarns

9-10 Seogwipo-si (Korea, Repub-lic of)

** TC 159 Ergonomics

10 Istanbul (Turkey) * TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

11 Garching (Germany)

** TC 60 Gears


** TC 60/SC 1 Gears/Nomenclature and wormgearing


** TC 60/SC 2 Gears/Gear capacity calculation

14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables

14-17 Stuttgart (Germany)


14-18 Paris (France) * TC 2 Fasteners

14-18 Seoul (Korea, Republic of)

* TC 108 Mechanical vibration, shock and condition monitoring

16-18 Munich (Germany)

* TC 58/SC 3 Gas cylinders/Cylin-der design

16-18 (Korea, Repub-lic of)

** TC 123 Plain bearings


** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions


** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details


** TC 123/SC 5 Plain bearings/Quality analysis and assurance


** TC 123/SC 6 Plain bearings/Terms and common items


** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings

17-18 (South Africa) ** TC 44 Welding and allied processes

18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles

21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

21-25 Sao Paulo (Brazil)

* TC 181 Safety of toys


* TC 215 Health informatics

21-26 Berlin (Germany) * TC 147 Water quality

22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions

23 Paris (France) * TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

23 Tokyo (Japan) ** TC 206 Fine ceramics

24-25 Sarajevo (Bosnia and Herzegovina)

** TC 34/SC 12 Food products/Sen-sory analysis

24-25 Berlin (Germany) TC 173 Assistive products for persons with disability

28-31 Bali (Indonesia) * TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)

31 Bali (Indonesia) * TC 45/SC 2 Rubber and rubber products/Testing and analysis

31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

Berlin (Germany) ** TC 34/SC 15 Food products/Coffee

(South Africa) ** TC 44/SC 9 Welding and allied processes/Health and safety

(France) ** TC 111 Round steel link chains, chain slings, components and accessories

(France) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings

Berlin (Germany) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

Beijing (China) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices

Boulder (USA) ** TC 202 Microbeam analysis

Carson City (USA)

** TC 209 Cleanrooms and as-sociated controlled environments

October-December 2013

7-11 Oslo (Norway) * TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)

October-November 2013

28-1 Bali (Indonesia) TC 45 Rubber and rubber products


November 2013

1 Bali (Indonesia) * TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry


* TC 34/SC 17 Food products/Man-agement systems for food safety

4-8 Shenzen (China) * TC 160 Glass in building

4-9 Perros-Guirec (France)

** JTC 1 Information technology

6-9 Washington, D.C (USA)

* TC 227 Springs

7-9 Okinawa (Japan) ** TC 201 Surface chemical analysis

8 Paris (France) * TC 92/SC 1 Fire safety/Fire initia-tion and growth

10-15 Mexico (Mexico) * TC 113 Hydrometry

11-15 Tokyo (Japan) * TC 98 Bases for design of structures

13 Tokyo (Japan) ** TC 110/SC 1 Industrial trucks/Gen-eral terminology

14 Tokyo (Japan) ** TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks

14-15 Redlands (USA) * TC 211 Geographic in-formation/Geomatics

15 Tokyo (Japan) ** TC 110 Industrial trucks

19-21 Singapore (Singapore)

* TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

20-22 Tokyo (Japan) * TC 269 Railway applications

30 Berlin (Germany) ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts)

4th Quarter 2013

New Delhi (India) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

(Europe) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization


** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages

(Korea, Repub-lic of)

** TC 106 Dentistry

Paris (France) ** TC 275 Sludge recovery, recycling, treatment and disposal

Month unknown 2013

(South Africa) ** TC 27 Solid mineral fuels

(Unknown) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Bratislava (Slovakia)

** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

(Unknown) ** TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

(Sweden) ** TC 205 Building environment design

February 2014

10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces

Delft (Netherlands)

** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

(Sweden) ** TC 213 Dimensional and geometrical product specifications and verification

March 2014


* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems


TC 118 Compressors and pneumatic tools, ma-chines and equipment

23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings

23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings


27-28 Geneva (Switzerland)

* COUNCIL Council

April 2014

7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks

8-9 (Japan) ** TC 199 Safety of machinery

14-15 Hong Kong (Hong Kong, China)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

(Brazil) ** TC 102 Iron ore and direct reduced iron

May 2014


** TC 10 Technical product documentation


** TC 68/SC 4 Financial services/Securities and related financial instruments


* TC 68 Financial services

19-23 Berlin (Germany) ** TC 43 Acoustics

19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise

19-24 Karuizawa (Japan)

** TC 215 Health informatics

Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

Washington, D.C (USA)

** TC 46/SC 11 Information and doc-umentation/Archives/records management

June 2014

1-6 (Sweden) ** TC 127 Earth-moving machinery

5-6 Berlin (Germany) * TC 211 Geographic in-formation/Geomatics

September 2014

8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

10-12 Rio de Janeiro (Brazil)

* GA General Assembly

13 Rio de Janeiro (Brazil)

* COUNCIL Council

(South Africa) ** TC 178 Lifts, escalators and moving walks

Montreal (Canada)

** TC 213 Dimensional and geometrical product specifications and verification

October 2014

5-10 Berlin (Germany) ** TC 215 Health informatics

Prague (Czech Republic)

** TC 135 Non-destructive testing

November 2014

3-7 Cape Town (South Africa)

** TC 45 Rubber and rubber products

4th Quarter 2014

(South Africa) ** TC 146 Air quality

Month unknown 2014

(USA) ** REMCO Committee on refer-ence materials

(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

(Brazil) ** TC 28 Petroleum products and lubricants

Beijing (China) ** TC 36 Cinematography

(Germany) ** TC 37 Terminology and other language and content resources

(Japan) ** TC 44 Welding and allied processes

(United Kingdom)

** TC 142 Cleaning equipment for air and other gases

Suzhou (China) ** TC 164 Mechanical testing of metals

(Germany) ** TC 190 Soil quality

February 2015


** TC 213 Dimensional and geometrical product specifications and verification

1st Quarter 2015

Foshan (China) ** TC 107 Metallic and other inorganic coatings

Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

April 2015

(Europe) ** TC 215 Health informatics

2nd Quarter 2015

(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

3rd Quarter 2015

Sao Paulo (Brazil)

** TC 215 Health informatics

November 2015

(China) ** JTC 1 Information technology

Month unknown 2015

(South Africa) ** REMCO Committee on refer-ence materials

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products


(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom)

** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Russian Federation)

** REMCO Committee on refer-ence materials

(Australia) ** TC 44 Welding and allied processes

Date post:	06-Feb-2018
Category:	Documents
Upload:	ledung
View:	256 times
Download:	2 times

ISO Update · PDF fileISO Update, Supplement to ISO Focus+ ... de l'Industrie, de l'Artisanat...

Documents