ISO2858End Suction
Centrifugal Pumps
The FPS ISO pump is manufactured in Australia to the highest quality utilising best engineered practice available. The pumps are designed for industrial and agricultural application utilizing highest grade of materials for demanding application. The superior quality and design provides reliability of operation with minimum maintenance. Designed and manufactured to internationally recognised ISO 2858 standard.
The FPS ISO range offers bare shaft or frame mounted pumps which are suitable for direct coupling to electric motors, engines and for pulley drives. The stub shaft version is designed to be able to close coupled to all IEC 2 Pole and 4 Pole motors. The pumps are designed for vertical centre line discharge. However the pumps can also mounted in variety of different positions.
Standard material of construction are designed to handle clean water without solids. Pumps can be made to handle products other than water by using different materials of construction and seal combinations.
Available with single or double mechanical seals and are available in balanced or unbalanced configuration. Standard seal materials are Carbon/Ceramic faces with nitrile rubber bellow. Pumps can be supplied with seal flushing facility for pumping abrasive and hot water. Packed glands and wear rings are optional and available on request.
FPS ISO bearing housings are fitted with heavy duty deep groove ball bearings. All bare shaft pumps are fitted with greased for life bearings. As an option, bearing housings can be fitted with breather and sight glass for oil level.
Operating Conditions
Flows: Max 900M³/Hr
Head: Max 160M
Liquid Temperature: -15°C – 85°C with standard seal and up to 140°C with special Mechanical seal.
Maximum Working Pressure: 16 Bar
ISO
Seri
es
Casing Impeller Shaft
Standard Construction
Cast IronZinc Free Bronze
431SS
Optional Materials
Ductile Iron 316SS
Duplex SS
Bronze 316SS
Cast Iron Zinc Free Bronze
316SS Duplex SS
* Refer to Technical Data booklet for detailed materials in standard and optional material specifications.
FPS ISO Series
4 Pole Curves
125x100-200
100x65-200
80x50-200
65x40-200
50x32-200 40
50x32-200
50x32-160
50
m3/hr 10
l/sec15
20
3
40
30
50
60
2900 rpm(Nominal speed)
100
80
150
USGPM
IGPM
200
50
m3/hr
l/sec
10
3 4
5
6
8
10
50x32-160
200
150x125-250
100x65-200
100x80-160
VOLUMETRIC FLOW RATE
20 30 50 100
65x40-200
65x50-160
54 6 8 10 20 30
80x65-160
80x50-200
150 250 500
10040 50 70
125x100-200
50150
150
100
100x65-315
100x65-250
500150
65x40-315
65x40-250
100
100
150
80x50-315
80x50-250
250
250 500
VOLUMETRIC FLOW RATE
30
8
20
5 6
50
10
65x50-160
80x65-160
100
20
150
4030 50
100x80-160
1500
125x100-250
125x100-315
1000
1000
1500
500
400
300
600
200100
250
70
500
150
1000
300
15
20
30
1450 rpm(Nominal speed)
100
65x40-315
20
30
65x40-250
60
40
50
80
USGPM
IGPM 50
50 1000
125x80-400
80x50-315
80x50-250
100x65-250
100x65-315
125x100-250
125x100-315
125x100-400
250
100
100
150
150
250 500
500
300
150x125-315
150x125-250
250x200-315
200x150
-315
200x150-400
150x125-400
200x150-500
100
50
200
2500
1500
15001000
2500
400
5000
2900
rp
m
1450
rp
m
ISO 2858 Series Pump Performance Data Tombstone Curves
TOTA
L H
EAD
IN M
ETR
ESTO
TAL
HEA
D IN
MET
RES
TOTA
L H
EAD
IN F
EET
TOTA
L H
EAD
IN F
EET
125x100-200
100x65-200
80x50-200
65x40-200
50x32-200 40
50x32-200
50x32-160
50
m3/hr 10
l/sec15
20
3
40
30
50
60
2900 rpm(Nominal speed)
100
80
150
USGPM
IGPM
200
50
m3/hr
l/sec
10
3 4
5
6
8
10
50x32-160
200
150x125-250
100x65-200
100x80-160
VOLUMETRIC FLOW RATE
20 30 50 100
65x40-200
65x50-160
54 6 8 10 20 30
80x65-160
80x50-200
150 250 500
10040 50 70
125x100-200
50150
150
100
100x65-315
100x65-250
500150
65x40-315
65x40-250
100
100
150
80x50-315
80x50-250
250
250 500
VOLUMETRIC FLOW RATE
30
8
20
5 6
50
10
65x50-160
80x65-160
100
20
150
4030 50
100x80-160
1500
125x100-250
125x100-315
1000
1000
1500
500
400
300
600
200100
250
70
500
150
1000
300
15
20
30
1450 rpm(Nominal speed)
100
65x40-315
20
30
65x40-250
60
40
50
80
USGPM
IGPM 50
50 1000
125x80-400
80x50-315
80x50-250
100x65-250
100x65-315
125x100-250
125x100-315
125x100-500
125x100-400
250
100
100
150
150
250 500
500
300
150x125-315
150x125-250
250x200-315
200x150
-315
200x150-400
150x125-400
150x125-500
200x150-500
100
50
200
2500
1500
15001000
2500
400
5000
2900
rp
m
1450
rp
m
ISO 2858 Series Pump Performance Data Tombstone Curves
TOTA
L H
EAD
IN M
ETR
ESTO
TAL
HEA
D IN
MET
RES
TOTA
L H
EAD
IN F
EET
TOTA
L H
EAD
IN F
EET
2 Pole CurvesIS
O S
eri
es
www.franklin-electric.com.au
FE581 08/10
AUSTRALIA / NEW ZEALAND
Franklin Electric (Australia) Pty. Ltd. 106-110 Micro CircuitDandenong South, Victoria 3175Australia
Toll Free: 1300 FRANKLINFax: +61 3 9799 5050Tel: +61 3 9799 5000www.franklin-electric.com.au
UNITED STATES
Franklin Electric Co., Inc.400 E. Spring Street, Bluffton, IN 46714 USA
Tel: +1.260.824.2900 Fax: +1.260.824.2909