isod-inst.pdf

InstallingInstallingArbortextArbortext® IsoDrawIsoDraw®

ArbortextArbortext IsoDrawIsoDraw FoundationFoundation 7.27.2ArbortextArbortext IsoDrawIsoDraw CADprocessCADprocess 7.27.2

AprilApril 20112011

CopyrightCopyright ©© 20112011 ParametricParametric TechnologyTechnology CorporationCorporation and/and/oror ItsIts SubsidiarySubsidiary Companies.Companies. AllAllRightsRights Reserved.Reserved.

User and training guides and related documentation from Parametric Technology Corporation and itssubsidiary companies (collectively "PTC") are subject to the copyright laws of the United States and othercountries and are provided under a license agreement that restricts copying, disclosure, and use of suchdocumentation. PTC hereby grants to the licensed software user the right to make copies in printed form of thisdocumentation if provided on software media, but only for internal/personal use and in accordance with thelicense agreement under which the applicable software is licensed. Any copy made shall include the PTCcopyright notice and any other proprietary notice provided by PTC. Training materials may not be copiedwithout the express written consent of PTC. This documentation may not be disclosed, transferred, modified,or reduced to any form, including electronic media, or transmitted or made publicly available by any meanswithout the prior written consent of PTC and no authorization is granted to make copies for such purposes.

Information described herein is furnished for general information only, is subject to change without notice, andshould not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability forany errors or inaccuracies that may appear in this document.

The software described in this document is provided under written license agreement, contains valuable tradesecrets and proprietary information, and is protected by the copyright laws of the United States and othercountries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in anymanner not provided for in the software licenses agreement except with written prior approval from PTC.

UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVILDAMAGES AND CRIMINAL PROSECUTION. PTC regards software piracy as the crime it is, and we viewoffenders accordingly. We do not tolerate the piracy of PTC software products, and we pursue (both civilly andcriminally) those who do so using all legal means available, including public and private surveillanceresources. As part of these efforts, PTC uses data monitoring and scouring technologies to obtain and transmitdata on users of illegal copies of our software. This data collection is not performed on users of legally licensedsoftware from PTC and its authorized distributors. If you are using an illegal copy of our software and do notconsent to the collection and transmission of such data (including to the United States), cease using the illegalversion, and contact PTC to obtain a legally licensed copy.

Important Copyright, Trademark, Patent, and Licensing Information: See the About Box, or copyright notice,of your PTC software.

UNITEDUNITED STATESSTATES GOVERNMENTGOVERNMENT RESTRICTEDRESTRICTED RIGHTSRIGHTS LEGENDLEGEND

This document and the software described herein are Commercial Computer Documentation and Software,pursuant to FAR 12.212(a)-(b) (OCT’95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN’95), and areprovided to the US Government under a limited commercial license only. For procurements predating theabove clauses, use, duplication, or disclosure by the Government is subject to the restrictions set forth insubparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 (OCT’88) or Commercial Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN’87), asapplicable. 01012011

Parametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494 USAParametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494 USA

ContentsContents

About This Guide.........................................................................................................5

Release Requirements ................................................................................................9System Requirements .........................................................................................10Supported Operating Systems and Web Browser .................................................. 11

Licensing ..................................................................................................................13Licensing Prerequisites .......................................................................................14License Types ....................................................................................................15Configuring Licenses...........................................................................................17Receiving Your License Pack...............................................................................18

Installing ...................................................................................................................21Installer Folders ..................................................................................................23Start Installer and Choose Setup Language ..........................................................25Installing the Java 2 Runtime Environment............................................................26Installing Arbortext IsoDraw Software ...................................................................33

Modify, Repair, or Remove Installation.........................................................................39Modifying the Installation .....................................................................................40Repairing the Installation .....................................................................................40Removing the Installation (Uninstalling) ................................................................40

3

AboutAbout ThisThis GuideGuide

This guide provides licensing and installation instructions forArbortext IsoDraw Foundation 7.2 and Arbortext IsoDraw CADprocess 7.2. Theseinstructions apply to both new installations and systems with older versions ofArbortext IsoDraw installed.

NoteNote

Older versions of Arbortext IsoDraw are not removed or modified when you installArbortext IsoDraw 7.2. If you want remove older versions, see Removing theInstallation (Uninstalling) on page 40.

In addition to installation instructions, this guide describes how to modify, repair,and remove the program files and optional features included in yourArbortext IsoDraw license. It also includes a section on installing the Java® 2Runtime Environment that Arbortext IsoDraw 7.2 requires. Software options forArbortext IsoDraw 7.2 that are licensed and installed separately have separateinstallation instructions.

PrerequisitesPrerequisitesBefore you install Arbortext IsoDraw, verify that your computer meets all therequirements in Release Requirements on page 9. You will also need a workingknowledge of the Microsoft Windows operating system you are installing thesoftware on.

5

RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw products refer to the followingdocumentation found in the Arbortext IsoDraw Help Center. Help Center includesboth HTML and PDF versions of the documentation. Run Arbortext IsoDraw, thenchoose HelpHelp ▶▶ Help CenterHelp Centerto access it.

DocumentationDocumentation DescriptionDescription

Arbortext IsoDraw Release Notes Information about new, changed, anddeleted features in thisArbortext IsoDraw release.

Installing Arbortext IsoDraw (This guide) Installation and licensinginformation for Arbortext IsoDraw.

Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions.

3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw.

Arbortext IsoDraw User's Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts.

Arbortext IsoDraw Macro LanguageReference

Reference for writing macros that youcan run in Arbortext IsoDraw.

Arbortext IsoDraw Data ExchangeReference

Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw.

TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site, phone, fax, or e-mail if youencounter problems using your product or the product documentation.

For complete details, refer to Contacting Technical Support in the PTC CustomerService Guide. This guide can be found under the Related Resources section of thePTC Web site at:

http://www.ptc.com/support/

The PTC Web site also provides a search facility for technical documentation ofparticular interest. To access this search facility, use the URL above and selectSearch the Knowledge Base.

You must have a Service Contract Number (SCN) before you can receive technicalsupport. If you do not have an SCN, contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative.

6 Installing Arbortext® IsoDraw®

http://www.ptc.com/support/index.htm

DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources:

• Online Help

Click HelpHelp from the user interface for online help available for the product.

• Reference Documents

Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL:


• Help Center

A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL:


You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site. If you do not have an SCN, contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative.

GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality, most efficient and mostcomprehensive deployments of the PTC Product Development System includingPro/ENGINEER, Windchill, Arbortext and Mathcad. PTC’s Implementation andExpansion solutions integrate the process consulting, technology implementation,education and value management activities customers need to be successful.Customers are led through Solution Design, Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment.

Contact your PTC sales representative for more information on Global Services.

CommentsCommentsPTC welcomes your suggestions and comments on our documentation. You cansubmit your feedback to the following email address:

[email protected]

Please include the following information in your email:

• Name

• Company

• Product

Documentation for PTC Products 7



mailto:[email protected]

• Product Version

• Document or Online Help Topic Title

• Level of Expertise in the Product (Beginning, Intermediate, Advanced)

• Comments (including page numbers where applicable)

DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions:

• Bold textBold text represents exact text that appears in the program's user interface. Thisincludes items such as button text, menu selections, and dialog box elements.For example,

Click OKOK to begin the operation.

• A right arrow represents successive menu selections. For example,

Choose FileFile ▶▶ PrintPrint to print the document.

• Monospaced text represents code, command names, file paths, or othertext that you would type exactly as described. For example,

At the command line, type version to display version information.

• Italicized monospaced text represents variable text that you wouldtype. For example,

installation-dir\custom\scripts\

• Italicized text represents a reference to other published material. For example,

If you are new to the product, refer to the Getting Started Guide for basicinterface information.


11ReleaseRelease RequirementsRequirements

System Requirements................................................................................................10Supported Operating Systems and Web Browser ......................................................... 11

Before you install Arbortext IsoDraw 7.2 software:

• Your computer and software must meet the requirements in this section. Bothminimum and recommended requirements are provided.

• You must configure and obtain a software license. See Licensing on page 13for details and instructions.

9

SystemSystem RequirementsRequirements

RequirementRequirementPlatformPlatform

MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor

l1 GHz x86 ≥ 2 GHz x86

RAM 1 GB ≥ 1 GBPC processor

l1 GHz x64 ≥ 3 GHz x64

RAM 1 GB ≥ 4 GB

Graphics card l l

OpenGL support;16-bit colorpalette; 800 × 600screen resolution

OpenGL support;32-bit colorpalette;1280 × 1024screen resolution

Free space on harddisk for CompleteComplete

installationl l

650 MB

Includesapplicationprogram files, Javaruntimeenvironment,documentation,library files,tutorial files,example files, andall optionalfeatures.

650 MB

Free space on harddisk for CustomCustom

installationl l

400 MB

Minimum CustomCustom

installationincludesapplicationprogram files andJava runtimeenvironment only.

650 MB

CustomCustom installationwith all optionalfeatures installed;requires sameamount of diskspace as CompleteComplete

installation.

Keyboard l l With function keys SameMouse l l 2-button Same

Printer l l

When using aPostScript printer,the printer drivershould supportPostScript forfaster printing.

Same


SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above

Windows Vista (32-bit) with Service Pack 2 or above

Windows 7 (32-bit)

Windows 7 (64-bit)

Microsoft Internet Explorer 7.0 or later (32-bit only) with ActiveX enabled

Release Requirements 11

22LicensingLicensing

Licensing Prerequisites ..............................................................................................14License Types ...........................................................................................................15Configuring Licenses .................................................................................................17Receiving Your License Pack .....................................................................................18

You need to obtain a license pack file containing a valid software license for theArbortext IsoDraw software before you install it.

Follow the instructions in this section to do the following:

• Configure a software license (or licenses) for the software you purchased

• Receive the license(s) in a license pack file.

13

LicensingLicensing PrerequisitesPrerequisitesTo configure license(s) and obtain a license pack file, you need the following:

• The Sales Order Number (SON) for the software you want to install.

• Web access and an account on PTC.com. Register at http://www.ptc.com/appserver/common/account/basic.jsp.

• The Physical Address of the Ethernet adapter on your Arbortext IsoDrawcomputer. This address is the same as the CPU ID in the license configurationprogram on the PTC.com Arbortext Support Center website—and the Host IDin the Arbortext IsoDraw installer program.

To display the Physical Address of the Ethernet adapter (CPU ID or Host ID)for your system:

1. From the Windows StartStart menu, choose RunRun.

2. In the RunRun dialog box, type cmd in the OpenOpen text box.

3. In the Windows command interpreter window, enter ipconfig /all atthe command prompt. The Physical Address is listed underEthernet adapter Local Area Connection.

AboutAbout LicensingLicensing

For each copy of Arbortext IsoDraw software you plan to install, you must:

• Configure a license on the PTC Arbortext Support Center website, http://www.ptc.com/support/arbortext.htm, using your Sales Order Number (SON) andHost ID (also called CPU ID). See Configuring Licenses on page 17 fordetailed instructions.

• Obtain a license pack file containing your configured license(s). The licensepack file comes as a text file attached to an email from PTC LicenseManagement ([email protected]). You save the attached license pack file to afolder on the computer you will install Arbortext IsoDraw on. See ReceivingYour License Pack on page 18 for detailed instructions.


http://www.ptc.com/appserver/common/account/basic.jsp

http://www.ptc.com/appserver/common/account/basic.jsp

http://www.ptc.com/support/arbortext.htm

http://www.ptc.com/support/arbortext.htm

AboutAbout LicenseLicense TypesTypes

Arbortext IsoDraw can run using either a locked or floating license.

• A locked license allows Arbortext IsoDraw to run on one authorized computer.The locked license is stored in a license file on that computer.

• A floating license allows Arbortext IsoDraw to run on any computer connectedto a “license server” computer on your network. The license file on the licenseserver can contain multiple floating licenses. This allows multiple computerson the network to run Arbortext IsoDraw concurrently—up to the total numberof floating licenses available.

See License Types on page 15 for more information the different licensing typesavailable for Arbortext IsoDraw software.

NoteNote

You can also set up Arbortext IsoDraw to run with either a locked or a floatinglicense if you specify Both license typesBoth license types during installation. (See Select LicenseType on page 35.)

FloatingFloating LicenseLicense PrerequisitesPrerequisites

The following prerequisites apply if you plan to install Arbortext IsoDraw 7.2software with a floating license:

• The floating license server must have the FLEXnet™ license managementsoftware installed on it. This software is in the FlexLM folder on yourArbortext IsoDraw 7.2 CD and in the Arbortext IsoDraw 7.2 download Zipfile.

Run \FlexLM\setup.exe to install this software on the license server. Seethe FLEXnet Licensing End User Guide for instructions. (Installing FLEXnetlicense management software requires administrator rights on the license servercomputer.)

• Your Arbortext IsoDraw software must be have a working network connectionto the license server computer using the port number you specify.

LicenseLicense TypesTypesWhen you install Arbortext IsoDraw, you must specify the type of license you willbe using. The licensing options are:

• Locked licenseLocked license

• Floating license, managed by a license server machineFloating license, managed by a license server machine

• Both licensing typesBoth licensing types

Licensing 15

Each licensing type is described below.

LockedLocked LicenseLicense

A locked license enables you to run Arbortext IsoDraw on one authorizedcomputer. The locked license is stored in a license file on that computer and islocked to that computer’s Host ID (also called the CPU ID; i.e., the physicaladdress of the Ethernet adapter in the computer). You can run an unlimited numberof instances of Arbortext IsoDraw on the one authorized computer.

If you select Locked licenseLocked license during installation, you must specify the license filepath.

FloatingFloating LicenseLicense

Allows multiple computers (license clients) on the network to runArbortext IsoDraw concurrently—up to the total number of floating licensesavailable. The computers running Arbortext IsoDraw must be connected to thelicense server machine.

When you install Arbortext IsoDraw with a floating license, you must specify thecommunications port number and license server name (Host Name) in the formPORT@SERVERNAME; for example, 7788@aberdeen.

Before you install Arbortext IsoDraw with a floating license, verify the followingwith your network administrator:

• The port number your Arbortext IsoDraw system will use to communicate withthe license server.

• The Host Name of the license server machine on your network.

• Installation of the FLEXnet license management software on the license servermachine.

The FLEXnet license management software and installer program, setup.exe, are in the FlexLM folder on the Arbortext IsoDraw 7.2 CD or in thedownload Zip file. After the FLEXnet software is installed, it must beconfigured to recognize your Arbortext IsoDraw computer as a floating licenseclient. See the FLEXnet Licensing End User Guide for license managementsoftware installation and configuration instructions. You can download thisguide from the Reference Documents section of the PTC.com ArbortextSupport Center website.

NoteNote

The license server can also have an Arbortext IsoDraw 7.2 floating license clientinstalled on it. In this case, the license server name is the Host Name of thecomputer you are installing the Arbortext IsoDraw software on.


NoteNote

If you installed FLEXnet license management software for Arbortext IsoDraw 7.0or 7.1, you can use this same license management software for Arbortext IsoDraw7.2. The license management software for 7.0, 7.1 and 7.2 is the same.

BothBoth LicensingLicensing TypesTypes

Selecting Both licensing typesBoth licensing types during installation enables Arbortext IsoDraw to runwith either a locked license or a floating license. You must configure both types oflicenses; i.e., you must enter the license file path for the locked license and thePORT@SERVERNAME for the floating license. (See details in Locked License onpage 16 and Floating License on page 16.)

ConfiguringConfiguring LicensesLicensesNoteNote

Read the “License Management” chapter in your PTC Customer Service Guidebefore you start configuring Arbortext IsoDraw 7.2 licenses. The generalinstructions in that chapter will prepare you for the Arbortext IsoDraw–specificlicensing instructions below.

To configure the Arbortext IsoDraw software licenses you purchased:

1. Go to the PTC.com home page and log into your PTC.com web account.

2. Choose SupportSupport ▶▶ Arbortext Support CenterArbortext Support Center.

3. On the Arbortext Support CenterArbortext Support Center page, click the LicensingLicensing tab.

4. Below Arbortext IsoDraw & Arbortext IsoView, click Configure New SoftwareConfigure New Software.This starts the licensing web tool program.

NoteNote

The licensing web tool steps you through the process of configuring your SalesOrder Number to your hardware. It then creates license codes for the newsoftware you purchased.

5. When the Configure New SoftwareConfigure New Software page appears, the licensing web tool isrunning. Follow the prompts and enter the required information listed below.

Licensing 17

(Use the web tool’s ContinueContinue and ResetReset buttons—not not the browser’sforward and back arrow buttons—to navigate in the web tool.)

• Enter the PTC Sales Order Number (SON) used to purchase the softwarelicense(s) you want to configure.

• Choose a set of software licenses to configure. There might be severalavailable, and there might be others that were previously configured.

• Specify the computer you want to assign the software license to using thecomputer's unique Host ID (called the CPU ID in the web tool).

You can configure licenses for software purchased with locked and/orfloating licenses. You can also specify the server configuration as SingleServer or Triad. (See License Types on page 15 for license and server typedescriptions.)

6. After license codes are created, they are stored on PTC’s servers. You can thenuse the licensing web tool to submit a request to have a license pack filecontaining your license codes sent to you. (See Receiving Your License Packon page 18.)

After the license codes are created, you can use the licensing web tool to doany of the following at any time:

• Reconfigure Software LicensesReconfigure Software Licenses – move licenses (identified by SoftwareContract Number (SCN); i.e., the Sales Order Number plus CPU ID) todifferent hardware, or, consolidate licenses to a single server from a triad orbreak a triad into a single servers.

• Retrieve Existing License PacksRetrieve Existing License Packs – Retrieve existing license pack files bySCN, CPU ID (Host ID) or Install Site (Site ID). The license pack will besent to you by email. (You need to do this before you installArbortext IsoDraw software.)

ReceivingReceiving YourYour LicenseLicense PackPackUse the licensing web tool on the PTC.com Arbortext Support CenterArbortext Support Center web pageLicensingLicensing tab to request the PTC license pack file containing the license codes youconfigured for your new software. The file will be sent to you by email. (SeeConfiguring Licenses on page 17 for licensing web tool instructions.)

When you use the licensing web tool to Configure New SoftwareConfigure New Software or ReconfigureReconfigureSoftware LicensesSoftware Licenses, you are automatically prompted to have the license pack sent toyou when you are done. You can also have an existing license pack sent any timeusing the web tool’s Retrieve Existing License PacksRetrieve Existing License Packs option.


You receive your PTC license pack file attached to an email message [email protected]. The attached license pack is a text file with a filename of the formlm_xxxxxxxx_standard.txt. The email message may contain licensinginstructions for several PTC software products, depending on the content of thelicense pack file.

Save the attached license pack file, lm_xxxxxxxx_standard.txt, and notewhere you saved it.

• If you install Arbortext IsoDraw with a locked license, you will need to specifythe license pack file location during installation.

• If you install Arbortext IsoDraw with a floating license, you will not need tospecify the license pack file location during installation. However, your systemadministrator will need to know where to find it in order to configure theFLEXnet license management software before you install theArbortext IsoDraw software.

After you receive and save your license pack file, you can install run theArbortext IsoDraw installer. (See Installing on page 21.)

Licensing 19

33InstallingInstalling

Installer Folders.........................................................................................................23Start Installer and Choose Setup Language .................................................................25Installing the Java 2 Runtime Environment...................................................................26Installing Arbortext IsoDraw Software ..........................................................................33

To install all required Arbortext IsoDraw 7.2 software, you must run theArbortext IsoDraw 7.2 installer program, setup.exe, found in the IsoDrawfolder on your Arbortext IsoDraw 7.2 CD or in the Arbortext IsoDraw 7.2download Zip file.

To begin installing:

1. Load your Arbortext IsoDraw 7.2 CD or extract your Arbortext IsoDraw 7.2download Zip file to a temporary folder.

2. Open the CD or temporary folder and browse the installer folders. (SeeInstaller Folders on page 23 for folder content descriptions.)

3. Run setup.exe in IsoDraw folder and follow the Arbortext IsoDraw 7.2instructions in this section. If necessary, follow the Java software installationinstructions in this section as well.

NoteNote

Arbortext IsoDraw 7.2 requires Java 2 Special Edition (J2SE) RuntimeEnvironment 5.0 Update 1. If your system already has this Java softwareinstalled, you can skip the Java installation instructions. Otherwise, after you

21

choose your setup language, the Arbortext IsoDraw 7.2 installer launches theseparate Java installer automatically. After Java installation completes, theArbortext IsoDraw 7.2 installer automatically resumes.


InstallerInstaller FoldersFoldersOpen your Arbortext IsoDraw 7.2 CD or Arbortext IsoDraw 7.2 download Zip filetemporary folder in Windows Explorer and browse the installer folders. Eachfolder’s contents are described below.

DocumentationDocumentation FolderFolder

The Documentation folder contains the documentation you can read beforeyou install Arbortext IsoDraw 7.2 software.

• (This guide) Installing Arbortext IsoDraw (isod-inst.pdf)

• Arbortext IsoDraw Release Notes (isod-relnotes.pdf)

• Arbortext IsoView Release Notes (isov-relnotes.pdf)

After installation, you can also find these documents in the Arbortext IsoDrawHelp Center, accessed from the HelpHelp menu in Arbortext IsoDraw 7.2.

FlexLMFlexLM FolderFolder

The FlexLM folder contains the FLEXnet license management software andsetup.exe, the installer program for FLEXnet software.

If you plan to install Arbortext IsoDraw 7.2 software with a floating license, theFLEXnet software must be installed on the machine you specify as the floatinglicense server BEFORE you run the Arbortext IsoDraw 7.2 installer program. (SeeFloating License Prerequisites on page 15 for more information.)

NoteNote

If you installed the FLEXlm license management software for Arbortext IsoDraw7.0, it is not necessary to install the FLEXnet software for Arbortext IsoDraw 7.2.The license management product name changed from 7.0 to 7.2, but the softwareitself did not change.

Installing 23

IsoDrawIsoDraw FolderFolder

The IsoDraw folder contains the Arbortext IsoDraw 7.2 installation files andsetup.exe, the installer program for the Arbortext IsoDraw 7.2 software.

IsoViewIsoView FolderFolder

The IsoView folder contains the Arbortext IsoView bundle installer,IsoView71BundleSetup.exe.

Proe2isoProe2iso FolderFolder

The proe2iso folder contains the ZIP file, proe2iso_Wf4.zip. This zip filecontains proe2iso.dll and all other files needed to run the ArbortextProE2Iso™ Pro/TOOLKIT® application within Pro/ENGINEER®.

Arbortext ProE2Iso enables you to save Pro/ENGINEER parts and assemblies as3D Arbortext IsoDraw ISO files from inside Pro/ENGINEER. (See the ArbortextProE2Iso User’s Guide in the Arbortext IsoDraw Help Center for instructions onhow to install and use this Pro/ENGINEER add-on.)

NoteNote

You need a valid Pro/ENGINEER software license to use the Arbortext ProE2Isoapplication.

ThumbnailThumbnail FolderFolder

The thumbnail folder contains the Arbortext IsoDraw Thumbnailer 7.2installers for 32-bit and 64-bit systems:

• Thumbnailer71Setup_32.exe (32-bit installer)

• Thumbnailer71Setup_64.exe (64-bit installer)

The optional, separately installed Thumbnailer 7.2 software enables you to viewthumbnail images of ISO files when you choose ViewView ▶▶ ThumbnailsThumbnails in WindowsExplorer.

You can switch thumbnail image generation on or off for an ISO file using theGenerate previewGenerate preview option on the Preferences: miscPreferences: misc page. The thumbnail image hasthe same image attributes as the TIFF preview image you see in theArbortext IsoDraw OpenOpen dialog when you have PreviewPreview selected. You can changeTIFF preview image attributes on the Preferences: miscPreferences: misc page.


StartStart InstallerInstaller andand ChooseChoose SetupSetupLanguageLanguage1. Run setup.exe in the IsoDraw folder to start the Arbortext IsoDraw 7.2

installer. The first installer wizard dialog box appears and prompts you to selecta language for this installation. The language you choose determines thelanguage used in the following Arbortext IsoDraw components:

• Installer menus and dialogs

• Application menus and dialogs

• Software license text

2. In the language list, select the language and then click OKOK. (The defaultselection is your current Microsoft Windows language setting.)

InstalledInstalled LanguageLanguage forfor LibraryLibrary andand PatternPattern FilesFilesNoteNote

The language setup for Arbortext IsoDraw 7.2 library files and pattern files is thesame as it was for Arbortext IsoDraw 7.0.

The language you choose in the Choose Setup LanguageChoose Setup Language dialog box determineswhich language the Arbortext IsoDraw 7.2 library files and pattern files areinstalled with.

SelectedSelected andand InstalledInstalled LibraryLibrary FileFile LanguagesLanguages

SelectedSelected LanguageLanguage InstalledInstalled LibraryLibrary FileFile LanguageLanguage

English, Spanish, Korean, Japanese,Traditional Chinese, and SimplifiedChinese

English

German GermanFrench FrenchItalian Italian

SelectedSelected andand InstalledInstalled PatternPattern FileFile LanguagesLanguages

SelectedSelected LanguageLanguage InstalledInstalled PatternPattern FileFile LanguageLanguage

English, French, Italian, Spanish,Korean, Japanese, Traditional Chinese,and Simplified Chinese

English

German German

Installing 25

• If you do a CompleteComplete installation, library and pattern files are installed with allother Arbortext IsoDraw 7.2 features.

• If you do a CustomCustom installation, you must select the features, Library FilesLibrary Files andPattern FilesPattern Files, to install them. (See Custom Arbortext IsoDraw Installation onpage 34 for more information.)

InstallingInstalling thethe JavaJava 22 RuntimeRuntimeEnvironmentEnvironmentSome features of Arbortext IsoDraw 7.2 require the Java 2 Standard Edition (J2SE)Runtime Environment. After you select the language, the Arbortext IsoDrawinstaller looks for this Java software on your Arbortext IsoDraw system. If it is notfound, the installer automatically starts the J2SE Runtime Environment 5.0 Update1 installer described in this section.

JavaJava InstallationInstallation StartupStartupIf the Arbortext IsoDraw 7.2 installer does not find the required Java software onyour system, the Java 2 Standard Edition Runtime Environment 5.0 Update 1installer starts automatically. The Java installer startup dialog box appears asshown.


If you click CancelCancel in the dialog box below while the Java installer is starting, youwill abort both the Java installation and your Arbortext IsoDraw installation.

NoteNote

The Java 2 Runtime Environment installation program is not currently available inall languages Arbortext IsoDraw supports. If it does not appear in your selectedlanguage, contact PTC Customer Support for help installing the Java 2 RuntimeEnvironment.

Installing 27

JavaJava LicenseLicense AgreementAgreementThe Java 2 Standard Edition (J2SE) Runtime Environment software andArbortext IsoDraw software are licensed separately. To continue Java installation,select the option to accept the license agreement in the Java LicenseLicense dialog boxbelow, then click NextNext.

The NextNext button is unavailable until you select the option to accept the licenseagreement. If you do not accept the license agreement, you cannot continue Javainstallation. If you click CancelCancel, you will abort both the Java installation and yourArbortext IsoDraw installation.


JavaJava InstallationInstallation Type:Type: TypicalTypical oror CustomCustomAfter you accept the Java license agreement, select the type of Java installation youwant to do; TypicalTypical or CustomCustom, in the Java Setup TypeSetup Type dialog box below.

• Select TypicalTypical if you want to install all recommended Java features in thedefault Java program folder.

• Select CustomCustom if you want to choose which Java features to install—or if youwant to specify the Java program folder.

Installing 29

CustomCustom JavaJava InstallationInstallation

If you choose CustomCustom in the Java installation Setup TypeSetup Type dialog box, the JavaCustomCustom SetupSetup dialog box appears as show below.

You can customize your Java installation in the Custom SetupCustom Setup dialog box asfollows:

• Select which optional Java program features to install. An optional feature willbe installed if there is a 11 in the icon next to the feature. Click this icon toenable or disable installation of that optional feature. (You cannot disableinstallation of the mandatory J2SE Runtime EnvironmentJ2SE Runtime Environment feature.)

If you enable the optional Support for Additional LanguagesSupport for Additional Languages feature, Java willbe able to display dialogs and menus in non-European languages. However,this setting will only affect the dialogs and menus that Java displays. It doesnot affect the Arbortext IsoDraw software language setting or user interface.

• Click ChangeChange, to change the folder location for Java program files. Thecurrently selected folder location is shown below Install toInstall to. The default Javafolder location is \Program Files\Java\jrel.5.0_01\.


RegisterRegister JavaJava Plug-Plug-inin withwith InternetInternet ExplorerExplorer BrowserBrowser

After you are done customizing your Java installation, click NextNext to register theJava Plug-In with the Microsoft Internet Explorer browser. Select Microsoft InternetMicrosoft InternetExplorerExplorer in the Browser RegistrationBrowser Registration dialog box below:

NoteNote

Even though this Browser RegistrationBrowser Registration dialog box appears after CustomCustom SetupSetup, youmust select Microsoft Internet ExplorerMicrosoft Internet Explorer to enable access to online help inArbortext IsoDraw. If you chose TypicalTypical Java installation in the Java Setup TypeSetup Type

dialog box, this dialog box will not appear and Microsoft Internet Explorer isselected by default.

Click NextNext to complete Java installation.

CompletingCompleting JavaJava InstallationInstallationAfter you click NextNext in either:

• The Java Setup TypeSetup Type dialog box (for a TypicalTypical Java installation)

• The Java Plug-In Browser RegistrationBrowser Registration dialog box (for a CustomCustom Javainstallation)

Installing 31

The Java InstallingInstalling dialog box below appears while Java software is being installedon your Arbortext IsoDraw system.

When Java installation is done, the Installation CompleteInstallation Complete dialog appears.


Click FinishFinish.

(Optional)(Optional) RestartingRestarting afterafter JavaJava InstallationInstallation

After you click FinishFinish the following dialog box prompts you to restart your system.

• Click YesYes to restart, and then automatically continue installingArbortext IsoDraw software after you log in.

• Click NoNo to automatically continue installing Arbortext IsoDraw software.

NoteNote

You do not need to restart your system after Java installation, however, you willneed to restart it after you install the Arbortext IsoDraw software.

InstallingInstalling ArbortextArbortext IsoDrawIsoDraw SoftwareSoftwareFollow the installer prompts and the instructions in this section to perform aCompleteComplete or CustomCustom Arbortext IsoDraw 7.2 software installation. If you had toinstall the Java 2 Runtime Environment first, the Arbortext IsoDraw 7.2 installerautomatically resumes after Java installation.

This section describes how to install Arbortext IsoDraw 7.2 with a locked orfloating license (or both license types). It also describes how to modify, repair, andremove (uninstall) the software.

ArbortextArbortext IsoDrawIsoDraw InstallationInstallation StartupStartupAfter you choose your setup language—and after Java installation (if required)completes—the installer begins Arbortext IsoDraw 7.2 software installation withthe Welcome dialog box. Click NextNext to continue.

Installing 33

VerifyVerify HostHost IDID

You need a license to continue installation. The wizard prompts you to request alicense for your Host ID shown in the dialog box. If you have not yet obtained alicense using the Host ID shown, note the Host ID, click CancelCancel, and then followthe instructions in Licensing on page 13.

Optional (if you already have a license): open the license file with a text editor andverify that the displayed Host ID matches the Host ID in the license file. If theHost IDs do not match, click CancelCancel and contact PTC Customer Support forassistance obtaining a valid license.

If the Host ID matches the Host ID in your license file, click NextNext to continue.

ArbortextArbortext IsoDrawIsoDraw LicenseLicense AgreementAgreementTo continue Arbortext IsoDraw installation, click YesYes in the License AgreementLicense Agreement

dialog box to accept the license agreement.

If you click NoNo, you will abort the Arbortext IsoDraw installation.

ArbortextArbortext IsoDrawIsoDraw InstallationInstallation TypeType andand FolderFolderLocationLocationAfter you accept the license agreement, select the installation type and (optionally)folder location:

1. In the Setup TypeSetup Type dialog box, click the installation type, CompleteComplete or CustomCustom

and then click NextNext.

• CompleteComplete installs all recommended features.

• CustomCustom lets you choose which features to install. If you choose CustomCustom,follow the instructions in Custom Arbortext IsoDraw Installation on page34 after you select the installation folder in the next step.

2. In the Choose Destination LocationChoose Destination Location dialog box, click BrowseBrowse to select theinstallation folder. The default installation folder is\Program Files\PTC\Arbortext IsoDraw 7.2\. Click NextNext to continue.

CustomCustom ArbortextArbortext IsoDrawIsoDraw InstallationInstallation

If you chose CustomCustom in the installation Setup TypeSetup Type dialog box, the Select FeaturesSelect Features

dialog box appears.


You can customize your installation in the Select FeaturesSelect Features dialog box as follows:

• Clear the check box for any feature you do not want to install. (All features areinitially selected.) The Program FilesProgram Files feature is mandatory; you cannot clearthis selection.

• If the DocumentationDocumentation feature is selected, documentation will installed in allavailable languages.

NoteNote

The Arbortext IsoDraw Help Center (available from the Arbortext IsoDraw 7.2HelpHelp menu after you install and run the software) will initially displaydocumentation in the language matching your current Windows languagesetting. In Help Center, you can change the displayed documentation languageusing the LanguageLanguage icon on the ConfigurationConfiguration tab.

SelectSelect LicenseLicense TypeTypeAfter you choose the installation type, indicate what type of licensing you will beusing for this installation of Arbortext IsoDraw 7.2 in the Setup TypeSetup Type dialog box.

Your options are:

• Locked licenseLocked license

• Floating license, managed by a license server machineFloating license, managed by a license server machine

• Both license typesBoth license types

The license type you select determines which information you must enter next.(See License Types on page 15 for more information.)

Installing 35

LockedLocked LicenseLicense

If you selected Locked licenseLocked license in the licensing type dialog box, the installerdisplays the Select License FileSelect License File dialog box below. Browse to the location in whichyou saved your license pack file (i.e., the path noted in Receiving Your LicensePack on page 18), select the license file, and then click OpenOpen.


FloatingFloating LicenseLicense

If you selected Floating licenses, managed by a license server machineFloating licenses, managed by a license server machine in thelicensing type dialog box, the installer displays the Enter TextEnter Text dialog box below.

NoteNote

Your license server and Arbortext IsoDraw 7.2 system must meet the FloatingLicense Prerequisites on page 15 for successful floating license installation.

Enter the port number and name of the license server in the formPORT@SERVERNAME; for example, 7788@aberdeen where port number is7788 and the license server name is aberdeen. For more information onfloating licenses, see License Types on page 15.

BothBoth LicenseLicense TypesTypes

If you selected Both licensing typesBoth licensing types in the licensing type dialog box, the installerwill have you enter the information required for both locked and floating licenses.Specifically, it will do the following:

1. Display the Select License FileSelect License File dialog, prompting you to select the license packfile required when using a locked license. (See Locked License on page 36.)

2. Display the Enter TextEnter Text dialog box, prompting you to enter the license file portnumber and server name required when using a floating license. (See FloatingLicense on page 37.)

Installing 37

CompletingCompleting ArbortextArbortext IsoDrawIsoDraw InstallationInstallationAfter you specify the type of licensing, the Ready to Install ProgramReady to Install Program dialog boxappears, indicating that the installer has enough information to complete theArbortext IsoDraw 7.2 software installation.

Click NextNext to install the software files on your Arbortext IsoDraw system. TheSetupSetup StatusStatus dialog box displays installation progress.

RestartingRestarting AfterAfter InstallationInstallation CompletesCompletes

After installation completes successfully, the InstallShield Wizard CompleteInstallShield Wizard Complete dialogbox appears.

Select Yes, I want to restart my computer nowYes, I want to restart my computer now, then click FinishFinish.

You must restart you computer after installing Arbortext IsoDraw 7.2 software toensure that the value of the Windows system environment variable,PTC_D_LICENSE_FILE, is correct for the license type you installed. If youinstalled a locked license, the value should match the license file location. If youinstalled a floating license, the value should match the PORT@SERVERNAME youentered. If you installed both license types, the value should contain both thelicense file location and PORT@SERVERNAME.

(Optional)(Optional) VerifyVerify InstallationInstallation inin WindowsWindows ControlControl PanelPanel

After the computer restarts, you can open the Add or Remove ProgramsAdd or Remove Programs dialog boxin Windows Control Panel to verify that there is an entry for both the ArbortextArbortextIsoDraw 7.2IsoDraw 7.2 program and the Java program, J2SE Runtime Environment 5.0 UpdateJ2SE Runtime Environment 5.0 Update11, in the Currently installed programsCurrently installed programs list.


44Modify,Modify, Repair,Repair, oror RemoveRemove

InstallationInstallation

Modifying the Installation ............................................................................................40Repairing the Installation ............................................................................................40Removing the Installation (Uninstalling) .......................................................................40

If you need to modify, repair, or remove (uninstall) the Arbortext IsoDraw 7.2software, do the following:

• Open the Add or Remove ProgramsAdd or Remove Programs dialog box in Windows Control Panel.

• Select the Arbortext IsoDraw 7.2Arbortext IsoDraw 7.2 program entry, then click ChangeChange.

The installer opens the WelcomeWelcome dialog box.

Choose one of the following options, then click NextNext:

• ModifyModify – to select new program features to add or remove currently installedfeatures

• RepairRepair – to reinstall all software features that were installed by the previoussetup

• RemoveRemove – to remove all program files and installed software features

39

ModifyingModifying thethe InstallationInstallationIf you choose to ModifyModify the installation, the Select FeaturesSelect Features dialog box appears.

You can modify your installation in the Select FeaturesSelect Features dialog box the same wayas described in Custom Arbortext IsoDraw Installation on page 34. When you aredone, click NextNext to modify your installation.

RepairingRepairing thethe InstallationInstallationIf you choose to RepairRepair the installation, the installer displays the Setup StatusSetup Status

dialog box, then validates the installation. If necessary, the installer willautomatically reinstall any bad or missing files required to match the programfeatures that were installed by the previous setup.

RemovingRemoving thethe InstallationInstallation (Uninstalling)(Uninstalling)NoteNote

The Java 2 Runtime Environment must be removed separately. RemovingArbortext IsoDraw 7.2 software does not remove the Java software.

NoteNote

If Arbortext IsoDraw Help Center is installed, it will be removed when youuninstall Arbortext IsoDraw 7.2. (Arbortext IsoDraw Help Center is installed whenyou do a CompleteComplete installation or a CustomCustom installation with the DocumentationDocumentation

feature selected.)

If you choose to RemoveRemove the installation, the installer first prompts you to confirmthat you want to remove the current Arbortext IsoDraw installation. Click YesYes tobegin the uninstall process.

When the Uninstall CompleteUninstall Complete dialog box appears, the Arbortext IsoDraw softwarehas been successfully removed.

NoteNote

If you created a license file in the Arbortext IsoDraw installation folder, the licensefile and the folder it is in will not be removed during uninstallation. This is becausethe license file might contain licenses for other PTC applications in addition to theArbortext IsoDraw license. Deleting the license file could prevent these otherapplications from obtaining a license to run.


4 Modify, Repair, or Remove Installation 41

Date post:	01-Jan-2016
Category:	Documents
Upload:	rlnjay2003
View:	117 times
Download:	7 times