Assessment Manager: MS5 Page 1 of 28
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
0087
Accredited to ISO/IEC 17065:2012
to provide product conformity certification
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Holmesfield Road
Warrington
Cheshire
WA1 2DS
Contact: Jenny Whittaker
Tel: +44 (0) 1925 655166
E-Mail: [email protected] Website: www.warringtonfire.com.
Locations where certification activities covered by the above Accreditation Standard are undertaken
Warringtonfire Testing and Certification Limited, trading as WarringtonfireHolmesfield Road Warrington Cheshire WA1 2DS United Kingdom
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 2 of 28
DETAIL OF ACCREDITATION
Product Standard
Penetration Seals Certifire Scheme Document TS03
Warringtonfire-Mideast Certification Document PD40
Enhanced security performance of doors Certisecure Scheme Document WCL001
Fire Resisting Door sets and openable windows with fire resisting and/or smoke control characteristics and optional enhanced security performance
Certifire Scheme Documents TS10, TS12, TS30, TS42 Warringtonfire-Mideast Certification Document PD40
Intumescent Seals for Fire Doors Certifire Scheme Documents, TS35
Warringtonfire-Mideast Certification Document PD40
Fire resisting industrial doors Certifire Scheme Document TS30
Warringtonfire-Mideast Certification Document PD40
Building Hardware for Fire Doors EN1935, EN179, EN1125, EN1154, EN1155,
EN1158, EN 12209 Certifire Scheme Documents TS23, TS24, TS26, TS31, TS32, TS33, TS34 Warringtonfire-Mideast Certification Document PD40
Fire protective products, including steelwork protection ETAG 018 Parts 1, 2, 3 & 4
Certifire Scheme Documents TS14, TS15, TS45 Warringtonfire-Mideast Certification Document PD40
Linear gap products Certifire Scheme Document TS40
Warringtonfire-Mideast Certification Document PD40
Installed products used in construction – ClassB/Class C (EN)
Certifire Scheme Document TS 72
Cavity Barriers Certifire Scheme Document TS39
Warringtonfire-Mideast Certification Document PD40
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 3 of 28
Product Standard
Smoke and Heat Ventilators Certifire Scheme Document TS47
Air Transfer Grilles Certifire Scheme Document TS47
Wood based panel products EN13986
Warringtonfire-Mideast Certification Document PD40
Products with Class 0 or Class 1 performance
Certifire Scheme Document TS19, Warringtonfire-Mideast Certification Document PD40
Products with Class B or Class C performance
Certifire Scheme Document TS46, Warringtonfire-Mideast Certification Document PD40
Materials of Restricted Combustibility and Non-Combustibility
Certifire Scheme Document TS20 Warringtonfire-Mideast Certification Document PD40
Smoke Seals for Doors and Fire Resisting Doors Certifire Scheme Document TS21
Warringtonfire-Mideast Certification Document PD40
Ductwork Certifire Scheme Document TS48
Fire protection systems for tunnel linings Certifire Scheme Document TS58
Reaction to fire performance requirements – Rigid Cellular Foam
Certifire Scheme Document TS67
Mineral Fibre Products Certifire Scheme Document TS70
Smoke and Fire Dampers Warringtonfire-Mideast Certification Document
PD40 and EN 12101- 8
Powered Heat and Smoke Exhaust Ventilators Warringtonfire-Mideast Certification Document
PD40
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 4 of 28
Product Standard
Natural Heat and Smoke Exhaust Ventilators Warringtonfire-Mideast Certification Document
PD40 and EN 12101 - 2
External Walls including Sandwich Panels Warringtonfire-Mideast Certification Document
PD40
Separating Elements Certifire Scheme Document TS 49
Reaction to fire performance requirements: materials used to clad scaffolding (with optional strength, light transition and permeability requirements)
Certifire Scheme Document TS 62
Reaction to fire performance requirements: material used as temporary protective covering.
Certifire Scheme Document TS 63
Contribution of top and bottom pivots to the performance of fire/smoke resisting door assemblies
Certifire Scheme Document TS 80
Contribution of electromechanically operated locks and strikes to the performance of fire resisting doorsets
Certifire Scheme Document TS 81
Contribution of lever handles and knob furniture to the performance of fire resisting door assemblies
Certifire Scheme Document TS 82
Contribution of variable geometry un-sprung and concealed hinges to the performance of fire resisting door assemblies
Certifire Scheme Document TS 83
Ceilings Certifier Scheme Document TS14
Warringtonfire-Mideast Certification Document PD40
Enhanced Security & General Performance Products Certisecure Scheme Document STS 200
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 5 of 28
Product Standard
Fire Resisting Glass and Glazing Systems EN 1096-4:2, EN 12150-2, EN 12337-2, EN 1279-5 EN 13024-2, EN 14178-2, EN 14179-2, EN14321-2 EN 14449, EN 1748-1-2, EN 1748-2-2, EN 1863-2 EN 572-9, EN 1051-2, EN14449 Certifire Scheme Documents TS25, Warringtonfire-Mideast Certification Document PD40
Thermal Insulating Products EN 13162, EN 13163, EN 13164, EN 13165, EN 13166 EN 13167, EN 13168, EN 13169, EN 13170, EN 13171
Suspended ceilings EN 13964
Floor covering EN 14041
Reaction to fire performance requirements:Electric cables 300/500 & 600/1000v fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire. Multicore and multipair cables.
Certifire Scheme Document TS 66
Installation/Application of Fire Protection Materials and Products (the FIRAS scheme)
Structural steel installations Sprinkler systems Fire resisting timber doors/doorsets Fire resisting metallic doors/doorsets Fire rated composite doors/doorsets Fire resisting rolling shutter doors/doorsets Fire door maintenance Fire resisting glazing Fire resisting ducting Fire rated dampers Fire resisting partition systems Cavity barriers Penetration seals Multi-layer paints
Fire protection products Fire protection products under the following schemes. EWCL2 Scheme Certification of fire protection products. EWCL5 Scheme Certification of fire protection products
Life safety fire risk assessments FRACS (company) certification scheme
END
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 6 of 28
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements andUKAS Publication GEN 5
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).
EN 12101-2:2003 EN 12101-7:2011 EN 15650:2010
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke curtains (fire safety).
EN 12101-1:2005 EN 12101-1:2005/A1:2006
Annex V- Product
Certification Body (AVCP) System 1
96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Annex V- Product
Certification Body (AVCP) System 1
97/176/EC Structural timber products (1/3) : - Solid structural timber products (bridges, railtracks and buildings).
EN 14374:2004
Annex V- FPC
Certification Body (AVCP) System 2+
97/176/EC Structural timber products (1/3) : - Solid structural timber products; Kits
EN 14250:2010
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 7 of 28
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1
97/176/EC Structural timber products (2/3) : - Structural glued laminated products
EN 14374:2004
Annex V- Product Certification Body (AVCP) System 1
97/462/EC Wood-based panels (1/2)
EN 13986:2004 EN13986:2004+A1:2015
Annex V- FPC Certification Body (AVCP) System 2+
97/462/EC Wood-based panels (1/2
EN 13986:2004 EN13986:2004+A1:2015
Annex V- Product
Certification Body (AVCP) System 1
97/462/EC Wood-based panels (2/2)
EN 13986:2004 EN13986:2004+A1:2015
Annex V- Product Certification Body (AVCP) System 1
97/740/EC Masonry and related products (3/3)
EN 15824:2009 EN 15824:2017
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011
Annex V- Product Certification Body
97/808/EC EN 14041:2004 EN 14041:2004/AC:2006
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 8 of 28
(retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
(AVCP) System 1
Floorings (2/2) : - Resilient and textile
EN 14904:2006
Annex V- Product Certification Body (AVCP) System 1
97/808/EC Floorings (2/2) : - Floor screed materials (for internal uses).
EN 13454-1:2004 EN 13813:2002
Annex V- Product Certification Body (AVCP) System 1
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14963:2006 EN 1873:2005 EN 14509:2006 EN 14509:2006/AC:2008 EN 14509:2013
Annex V- Product
Certification Body (AVCP)
98/437/EC Internal and external wall and ceiling finishes (3/5) : -
EN 13964:2004 EN 13964:2004/A1:2006 EN 13964:2014
System 1
Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
Annex V- Product Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).
EN 14716:2004 EN 15102:2007+A1:2011
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011
Annex V- Product Certification Body
98/437/EC EN 15102:2007+A1:2011 EN 438-7:2005
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 9 of 28
(retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
(AVCP) System 1
Internal and external wall and ceiling finishes (3/5) : - Panels
Annex V- Product Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Sidings
EN 13245-2:2008 EN 13245-2:2008/AC:2009
Annex V- Product Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006 EN 13956:2012
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) :- water vapour control layers
EN 13859-1:2010 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006
Annex V- Product
Certification Body (AVCP) System 1
2000/367/EC Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
EN 14915:2013
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 10 of 28
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1125:2008 EN 1154:1996/A1:2002 EN1154:1996/A1:2002/AC:2006 EN1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
EN 14846: 2008 EN 14351-1:2006+A1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : -
EN 14351-1:2006+A1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/469/EC Products related to concrete, mortar and grout (2/2) : - Concrete protection and repair products (for uses subject to reaction to fire
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004
regulations).
Annex V- Product Certification Body (AVCP) System 1
2010/C71/03 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement & Part 2 Gypsum fibre boards
EN 15283-1:2008+A1:2009
Annex V- Product
Certification Body (AVCP) System 1
EU 2019/896 + 98/213/EC Internal partition kits (1/5)
EAD 210005-00-0505
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 11 of 28
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
99/91/EC Thermal insulating products (2/2) : - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2008 EN 13162:2012 EN 13162:2012+A1:2015 EN 13163:2008 EN 13163:2012 EN 13163:2012+A1:2015 EN 13164:2008 EN 13164:2012 EN 13164:2012+A1:2015 EN 13165:2008 EN 13165:2012 EN 13165:2012+A1:2015 EN 13165:2012+A2:2016 EN 13166:2008 EN 13166:2012EN 13166:2012+A1:2015 EN 13166:2012+A2:2016 EN 13167:2008 EN 13167:2012 EN 13167:2012+A1:2015 EN 13168:2008 EN 13168:2012 EN 13168:2012+A1:2015 EN 13169:2008 EN 13169:2012 EN 13169:2012+A1:2015 EN 13170:2008 EN 13170:2012 EN 13170:2012+A1:2015 EN 13171:2008 EN 13171:2012 EN 13171:2012+A1:2015 EN 14064-1:2010 EN 14303:2009 EN 14303:2009+A1:2013 EN 14304:2009 EN 14304:2009+A1:2013 EN 14305:2009 EN 14305:2009+A1:2013 EN 14306:2009 EN 14306:2009+A1:2013 EN 14307:2009 EN 14307:2009+A1:2013 EN 14308:2009 EN 14308:2009+A1:2013 EN 14309:2009 EN 14309:2009+A1:2013 EN 14313:2009 EN 14314:2009
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 12 of 28
EN 14314:2009+A1:2013 EN 14316-1:2004 EN 14317-1:2004 EN 14933:2007 EN 14934:2007
Annex V- Product
Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
EN 12150-2:2004 EN 1279-5:2005+A2:2010 EN 572-9:2004 EN 1279-5:2018
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
EN 1096-4:2004 EN 1096-4:2018 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V- Product
Certification Body (AVCP) System 1
EU 2017/C 118/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040089-00-0404
Annex V- Product
Certification Body (AVCP) System 1
EU 2018/C 19/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040287-00-0404
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 13 of 28
Annex V- Product Certification Body (AVCP) System 1
EU 2019/450 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040427-00-0404
Annex V- FPC Certification Body (AVCP) System 2+
EU 2017/C 118/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040089-00-0404
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- FPC Certification Body (AVCP) System 2+
EU 2018/C 19/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040287-00-0404
Annex V- FPC Certification Body (AVCP) System 2+
EU 2019/450 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040427-00-0404
Annex V- Product
Certification Body (AVCP) System 1
2017/C 435/07 + 99/454/EC Fire stopping, fire sealing and fire protection products (1/2) :- Fire stopping, fire sealing
EAD 350140-00-1106 (2017) EAD 350142-00-1106 (2017) EAD 350141-00-1106 (2017) EAD 350454-00-1104 (2017)
Annex V- Product Certification Body (AVCP) System 1
2017/C 435/07 + 99/454/EC Fire stopping, fire sealing and fire protective products (2/2) :- fire protective products
EAD 350141-00-1106 (2017) EAD 350454-00-1104 (2017) EAD 350402-00-1106 (2017)
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 14 of 28
Annex V- Product
Certification Body (AVCP) System 1
2015/C 226/04 Pedestrian doorsets, industrial, commercial, garage doors and openable windows Product standard, performance characteristics — Fire resisting and/or smoke control characteristics
EN 16034:2014
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
As a Technical
Assessment Body (TAB) for developing European Assessment Documents
Annex IV –Product Areas 35 Fire stopping, fire sealing and fire protective products,
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 15 of 28
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements: Product specification/ Properties / Standards
The Merchant Shipping (Marine Equipment) Regulations 2016
Directive 96/98/EC: Article 10 and Annex B
Fire Protection
Standards pursuant to
Directive 2014/90/EU: Chpt 4, Article 15 & Annex II Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: EC Product Verification
A.1/3.1 A.1/3.11, A.1/3.13, A.1/3.18 A.1/3.20 - 3.22 A.1/3.32 - 3.36 A.1/3.64*
* National legislation implementing Directive 96/98/EC until repealed by Article 40 of Directive 2014/90/EU
MED. 1/3.1 - Primary
deck coverings MED. 1/3.11A - A class divisions MED. 1/3.11B - B class divisions MED. 1/3.13 - Non-combustible materials MED. 1/3.18A - Decorative veneers MED. 1/3.18B - Paint systems MED. 1/3.18C - Floor coverings MED. 1/3.18D - Pipe insulation
** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 16 of 28
MED. 1/3.18E - Adhesives MED. 1/3.18F - Combustible ducts MED. 1/3.20 - Upholstered furniture MED. 1/3.21 - Bedding MED. 1/3.32 - Fire restricting materials MED. 1/3.33 - Furniture MED. 1/3.64** ‘C’ Class Divisions
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements: Product specification/ Properties / Standards
The Merchant Shipping (Marine Equipment) Regulations 2016
MED/3.19 Draperies, curtains and other suspended textile materials and films MED/3.26a Penetrations through ‘A’ class divisions – electric cable transits MED/3.26b Penetrations through ‘A’ class divisions – pipe, duct, trunk, etc. penetrations MED/3.27a Penetrations through ‘B’ class divisions – electric cable transits MED/3.27b Penetrations through ‘B’ class divisions – pipe, duct, trunk, etc. penetrations
** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 17 of 28
Note: The inspection of items marked thus * and ** are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).
EN 12101-2:2003 EN 12101-7:2011 EN 15650:2010
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke curtains (fire safety).
EN 12101-1:2005 EN 12101-1:2005/A1:2006
Annex V- Product
Certification Body (AVCP) System 1
96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Annex V- Product
Certification Body (AVCP) System 1
97/176/EC Structural timber products (1/3) : - Solid structural timber
EN 14374:2004
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 18 of 28
products (bridges, railtracks and buildings).
Annex V- FPC Certification Body (AVCP) System 2+
97/176/EC Structural timber products (1/3) : - Solid structural timber products; Kits
EN 14250:2010
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
97/176/EC Structural timber products (2/3) : - Structural glued laminated products
EN 14374:2004
Annex V- Product Certification Body (AVCP) System 1
97/462/EC Wood-based panels (1/2)
EN 13986:2004
Annex V- FPC Certification Body (AVCP) System 2+
97/462/EC Wood-based panels (1/2
EN 13986:2004
Annex V- Product
Certification Body (AVCP) System 1
97/462/EC Wood-based panels (2/2)
EN 13986:2004
Annex V- FPC
Certification Body (AVCP) System 2+
97/462/EC Wood-based panels (2/2
EN 13986:2004
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 19 of 28
Annex V- Product Certification Body (AVCP) System 1
97/740/EC Masonry and related products (3/3)
EN 15824:2009
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
97/808/EC Floorings (2/2) : - Resilient and textile
EN 14041:2004 EN 14041:2004/AC:2006 EN 14904:2006
Annex V- Product Certification Body (AVCP) System 1
97/808/EC Floorings (2/2) : - Floor screed materials (for internal uses).
EN 13454-1:2004 EN 13813:2002
Annex V- Product Certification Body (AVCP) System 1
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14963:2006 EN 1873:2005 EN 14509:2006 EN 14509:2006/AC:2008
Annex V- Product
Certification Body (AVCP)
98/437/EC Internal and external wall and ceiling finishes (3/5) : -
EN 13964:2004 EN 13964:2004/A1:2006
System 1
Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
Annex V- Product Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Coverings in roll form (as
EN 14716:2004 EN 15102:2007+A1:2011
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 20 of 28
internal finishes in walls or ceilings subject to reaction to fire regulations).
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Panels
EN 15102:2007+A1:2011 EN 438-7:2005
Annex V- Product Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Sidings
EN 13245-2:2008 EN 13245-2:2008/AC:2009
Annex V- Product Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006 EN 13956:2012
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 21 of 28
Annex V- Product Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) :- water vapour control layers
EN 13859-1:2010 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006
Annex V- Product Certification Body (AVCP) System 1
2000/367/EC Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
EN 14915:2013
Directive/Regulation
Conformity Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1125:2008 EN 1154:1996/A1:2002 EN1154:1996/A1:2002/AC:2006 EN1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
EN 14846: 2008 EN 14351-1:2006+A1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : -
EN 14351-1:2006+A1:2010
Annex V- Product
Certification Body (AVCP) System 1
99/469/EC Products related to concrete, mortar and grout (2/2) : - Concrete protection and repair products (for uses subject to reaction to fire
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004
regulations).
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 22 of 28
Annex V- Product Certification Body (AVCP) System 1
2010/C71/03 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement & Part 2 Gypsum fibre boards
EN 15283-1:2008+A1:2009
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
99/91/EC Thermal insulating products (2/2) : - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2008 EN 13162:2012 EN 13163:2008 EN 13163:2012 EN 13164:2008 EN 13164:2012 EN 13165:2008 EN 13165:2012 EN 13166:2008 EN 13166:2012 EN 13167:2008 EN 13167:2012 EN 13168:2008 EN 13168:2012 EN 13169:2008 EN 13169:2012 EN 13170:2008 EN 13170:2012 EN 13171:2008 EN 13171:2012 EN 14064-1:2010 EN 14303:2009 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 23 of 28
EN 14317-1:2004 EN 14933:2007 EN 14934:2007
Annex V- Product
Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
EN 12150-2:2004 EN 1279-5:2005+A2:2010 EN 572-9:2004
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- Product Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) :
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V- Product
Certification Body (AVCP) System 1
EU 2019/896 + 98/213/EC Internal partition kits (1/5)
EAD 210005-00-0505
Annex V- Product
Certification Body (AVCP) System 1
EU 2018/C 19/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040287-00-0404
Annex V- Product
Certification Body (AVCP)
EU 2019/450 + 97/556/EC External thermal insulation composite systems/ kits
EAD 040427-00-0404
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 24 of 28
System 1 with rendering (ETICS) (1/1)
Annex V- FPC Certification
Body (AVCP) System 2+
EU 2019/450 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040427-00-0404
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/ Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V- FPC Certification Body (AVCP) System 2+
EU 2017/C 118/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040089-00-0404
Annex V- FPC Certification Body (AVCP) System 2+
EU 2018/C 19/04 + 97/556/EC External thermal insulation composite systems/ kits with rendering (ETICS) (1/1)
EAD 040287-00-0404
Annex V- Product
Certification Body (AVCP) System 1
2017/C 435/07 + 99/454/EC Fire stopping, fire sealing and fire protection products (1/2) :- Fire stopping, fire sealing
EAD 350140-00-1106 (2017) EAD 350142-00-1106 (2017) EAD 350141-00-1106 (2017) EAD 350454-00-1104 (2017)
Annex V- Product Certification Body (AVCP) System 1
2017/C 435/07 + 99/454/EC Fire stopping, fire sealing and fire protective products (2/2) :- fire protective products
EAD 350141-00-1106 (2017) EAD 350454-00-1104 (2017) EAD 350402-00-1106 (2017)
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 25 of 28
Annex V- Product
Certification Body (AVCP) System 1
2015/C 226/04 Pedestrian doorsets, industrial, commercial, garage doors and openable windows Product standard, performance characteristics — Fire resisting and/or smoke control characteristics
EN 16034:2014
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements:Product
specification/ Properties/Standards
As a Technical
Assessment Body (TAB) for developing European Assessment Documents
Annex IV –Product Areas 35 Fire stopping, fire sealing and fire protective products,
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 26 of 28
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements: Product specification/ Properties / Standards
Marine Equipment Directive:
Directive 96/98/EC: Article 10 and Annex B
Fire Protection
Standards pursuant to
Marine Equipment (Directive 2014/90/EU) implemented in Northern Ireland by the Merchant Shipping (Marine Equipment) Regulations 2016
Directive 2014/90/EU: Chpt 4, Article 15 & Annex II Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: EC Product Verification
A.1/3.1 A.1/3.11, A.1/3.13, A.1/3.18 A.1/3.20 - 3.22 A.1/3.32 - 3.36 A.1/3.64*
* National legislation implementing Directive 96/98/EC until repealed by Article 40 of Directive 2014/90/EU
MED. 1/3.1 - Primary
deck coverings MED. 1/3.11A - A class divisions MED. 1/3.11B - B class divisions MED. 1/3.13 - Non-combustible materials MED. 1/3.18A - Decorative veneers MED. 1/3.18B - Paint systems MED. 1/3.18C - Floor coverings MED. 1/3.18D - Pipe insulation
** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 27 of 28
MED. 1/3.18E - Adhesives MED. 1/3.18F - Combustible ducts MED. 1/3.20 - Upholstered furniture MED. 1/3.21 - Bedding MED. 1/3.32 - Fire restricting materials MED. 1/3.33 - Furniture MED. 1/3.64** ‘C’ Class Divisions
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/Module/Article
Category of products or individual products
Essential requirements: Product specification/ Properties / Standards
Marine Equipment (Directive 2014/90/EU) implemented in Northern Ireland by the Merchant Shipping (Marine Equipment) Regulations 2016
MED/3.19 Draperies, curtains and other suspended textile materials and films MED/3.26a Penetrations through ‘A’ class divisions – electric cable transits MED/3.26b Penetrations through ‘A’ class divisions – pipe, duct, trunk, etc. penetrations MED/3.27a Penetrations through ‘B’ class divisions – electric cable transits MED/3.27b Penetrations through ‘B’ class divisions – pipe, duct, trunk, etc. penetrations
** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
Note: The inspection of items marked thus * and ** are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the
0087
Accredited to
ISO/IEC 17065:2012 to provide product conformity
certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Warringtonfire Testing and Certification Limited, trading as Warringtonfire
Issue No: 043 Issue date: 16 March 2021
Assessment Manager: MS5 Page 28 of 28
relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation
END