2
Isuzu D-MAX The versatile Isuzu D-MAX is both a hardworking Ute and a family 4WD. A night on the town, a trip to the gym, cruising the open road or engaging in a little recreational rough stuff, wherever your D-MAX takes you, ECB has the right accessory to add style while helping protect your car and your family. When it comes to protecting your Isuzu D-MAX it’s worth remembering that only the best will do. Genuine ECB products are manufactured from hi-tensile, structural grades of aluminium ensuring the best performance, strength and protection. From the sporty 76mm Nudge Bar through to the unmatched strength and reliability of an ECB Arc™ Winch Bar, ECB has a range of frontal protection bars and accessories that are styled to perfectly complement the Isuzu D-MAX and like the D-MAX they are tough enough to withstand almost anything suburbia or nature can dish out. Not only do ECB protection bars meet Australian Design Rules - each one is also covered by ECB’s exclusive Lifetime Warranty for complete peace of mind. East Coast Bullbars are the Strongest Built, Best Engineered and Australian Made, all components that are required to be the World’s Best Alloy Bullbars. Contact the ECB National Customer Service Centre for your local ECB Outlet FREE CALL: 1800 069 145 or visit our site: www.ecb.com.au AUSTRALIAN MADE C O M P A T I B L E A I R B A G W A R R A N T Y L I F E T I M E Fully Welded Gussets Quick-Click Harness One Piece Channel • Bumper Cut Design • Low Mount Winch Compatibility • 6mm One Piece Channel • 76mm Centre & 63mm Shoulder Tubes • LED Indicator/Park Lights • Optional ECB Bumper Lights • Bumper Cut Design • 6mm One Piece Channel • 76mm Centre & 63mm Shoulder Tubes • Fully Welded Gussets • LED Indicator/Park Lights • Optional ECB Bumper Lights For the best in frontal protection for the brand new Isuzu D-MAX, you can’t go past the strength, quality and distinctive style of the ECB Arc™ Winch Bar. Manufactured from hi-tensile, structural grade alloy, the one piece channel features 6mm thick construction, which is further reinforced with a full width, braced lower protection skirt. For serious off road enthusiasts, this ECB Arc™ Winch Bar will accommodate up to a 9,500lb Warn or Mean Mother low mount winch to help you get anywhere. Standard features include a 76mm x 4.75mm centre tube, fully gusseted 63mm x 4.2mm shoulder tubes, ECB bumper lights, LED indicator/park light combinations, air directional cooling vents, spotlight mounting provisions and an aerial tab. Also included with this ECB Arc™ Winch Bar is the Quick-Click Wiring System. This quick, reliable process has revolutionised the way indicator/park and fog lights are installed in bullbars. The Quick-Click has your LED indicator/park and fog light wiring all ready-to-go in a harness, all you need to do is plug it in which reduces fitting time by around 15 minutes. Manufactured from hi-tensile, structural grade alloy, this bar offers the best protection for the Isuzu D-MAX utilising the ECB Arc™ Bar bumper cut design. Boasting specifically engineered 6mm thick plasma cut steel mounting systems these bars are assured for the best fit and strongest design. The one piece channel features 6mm thick hi-tensile alloy construction, which is further reinforced with a full width, braced lower protection skirt to provide sufficient strength that will give you the level of safety and design you can count on. Standard features include optional ECB bumper lights, LED indicator/park light combinations, air directional cooling vents, spotlight mounting provisions and an aerial tab. Also included with the ECB Arc™ Bar for the Isuzu D-MAX is the Quick-Click Wiring System. The Quick-Click has your LED indicator/park and fog light wiring all ready-to-go in a harness, all you need to do is plug it in which reduces fitting time by around 15 minutes. ECB Arc™ Winch Bar - Mirror Polished Alloy Finish Shown ECB Arc™ Bar - Mirror Polished Alloy Finish Shown (07/2012 on)
