Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
IW-125S - Hydraulic Punch & Shear - 125 TonneDual Hydraulic Cylinders with Independent Operating StationsIncludes Auto Touch & Cut Systems & 6 Sets of Round Punches &Dies
Limited StockLimited Stock
Ex GST Inc GST
$35,950.00 $39,545.00ORDER CODE: P177
MODEL: IW-125S
Punching Pressure (Tonne): 125
Punching Table Type: Manual with Guides and &Adjustable Stops
Punching (Diameter x Thickness) - MS(mm):
Ø33 x 27, Ø50 x 18
Punching Throat Depth (mm): 310
Punching Maximum Stroke Length(mm):
100
Punching Cycles (15mm Stroke) - MS(cpm):
28
Punching Work Table Height (mm): 1069
Flat Bar Shear (W x Thickness) - MS(mm):
610 x 18, 400 x 25
Flat Bar Shear - Blade Length - MS(mm):
620
Flat Bar Shear Work Table Height(mm):
920
Angle Shear 90º - MS (mm): 152 x 152 x 18
Angle Shear 45º - MS (mm): 80 x 80 x 10
Angle Flange Trim (mm): 100
Angle Shear Work Table Height (mm): 1185
Round Solid Bar Shear - MS (mm): Ø50
Square Solid Bar Shear - MS (mm): 50 x 50
Solid Bar Shear Work Table Height(mm):
1310
Notching - Rectangle - MS (mm): 63.5 x 90 x 13
Notching Work Table Height (mm): 920
Motor Power (kW / hp): 11 / 15
Voltage / Amperage (V / amp): 415
Shipping Dimensions (L x W x H) (cm): 217 x 103 x 195
Nett Weight (kg): 3590
DescriptionThe Sunrise Punch & Shears are manufactured in Taiwan, also known as Ironworkers are well recognised in our Australian market for themachines being reliable & durable due to their structurally well manufactured unique design & engineering excellence. Sunrise is ISO-9001certified by BVQI, and our products meet the CE safety requirements and regulations. Sunrise relentlessly seeks continuous improvement andproduct development to keep a step ahead of their competitors.
The double cylinder "S/SD" series have two control foot pedals, & separate operations can be safely performed simultaneously withoutinterference. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke & deep throatenable mounting a wide range of special optional equipment. The large punching base with the "T-slot" fixing provide a solid base for securingthe punching tooling, as well as a wide range of optional & custom designed tooling.
The hydraulic system & components that drives the shearing beam & punching head is considerably very quiet compared to most othermachines and operates efficiently smooth in all modes. The electrical components & DC control circuit are operated at a low 24 volt system &provides full protection & safety with in the separate key locked cabinet.
The Sunrise machines have proven themselves over & over again to provide trouble free service for many years in production and we havereferences all around Australia to verify our statement.
Features• Five work stations, Punching, Notching, Plate Shearing, Angle Iron Shearing and Bar Shearing (all stations are guarded)• Dual hydraulic cylinders allows simultaneous operation without interference • Punching capacity up to 50mm standard• Mitre cutting of angle iron• Magnetic base halogen lamp• Hydraulic system is protected with replaceable filter cartridge• Adjustable stroke for faster punching• Curved shear blade for minimal job distortion• Most cutting blades are four-sided for long life
Page 1 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification
Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
• Punch, shear & notching table fitted with stops & guides as standard• Two-pedal operation allows two people to work machine to greatly speed up production• Large punch table with multi-purpose bolster, featuring a removable block for channel and beam flange punching• Adjustable length stop with one-touch electronic backgauge for greater efficiency in repetitious work • PUNCHING• Large hole punching up to Ø50mm as standard• Overhang bolster for punching channel & beam flanges• Large ruled support table with removable front section for leg down punching in angle or section• Easily adjustable stripper & safety guard • Pre-Commissioning: • 1. Punch & Shear is run & tested prior delivery• 2. Hydraulic oil is included with machineIncludes• 6 sets of round punches & dies:• Punches: 20, 22, 24, 26, 28 & 30mm• Dies: 20.7, 23.2, 25.2, 27.2, 29.2 & 31.2mm• Full safety guarding at all workstations • Tooling to all workstations• Punch, Shear & Notch support tables• Now with Quick Change Tooling• 1 metre adjustable "Auto touch length stop" once the material has pushed the micro-switch stop the hydraulic system is activated to shear
work pieceOptional Accessories• Punch & dies are available in Round, Square, Rectangle & Oblong shapes
Specific Features
Machine Capabilities Includes large hole punching up to 50mm Diameter Includes Auto Touch & Cut Length Stop Flat Bar Shear
Angle Shear Angle Shear Angle Shear Angle Shear
Page 2 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification
Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
Angle Shear Round Bar Shear Square Bar Shear Notcher
Work Light Monoblock Design For Rigid Frame Structure Keyed Punch Ram For Shaped Tool Alignment Solid Punching Base With T-Slot Grooves
Optional Single Vee Pressbrake Attachment Optional Multi Vee Preesbrake Optional Vee Notcher Punch Side Optional Channel Shear
Optional Hydraulic Holddown for Flat Shear Optional Pipe Notcher Optional Channel Punching Die Holder Optional Goose Neck Die Holder
Page 3 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification
Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
Optional Large Hole Punching Optional Angle Bending Press Optional Multi Stop Gauge Optional Duplicating Table
Recommended Accessories
P163Laser Guide System
P188Single-Vee Pressbrake BendingAttachment
P188ASingle-Vee Pressbrake BendingAttachment
P187Multi-Vee Pressbrake BendingAttachment
P165Ø6-26mm Round Punch & DiesSet
P166Ø11-40mm Round Punch &Dies Set
P726Ø26mm Round Punch - RPN1
P726AØ26.7mm Round Die - RDN1
Page 4 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification
Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
P60058 x 20mm Slotted Punch
P60068.7 x 20.7mm Slotted Die
P60018 x 8mm Square Punch
P60028.7 x 8.7mm Square Die
M800Rubber Mat - Anti-Fatigue
M805Rubber Mat - Anti-Fatigue
O000SpillFix Universal OrganicAbsorbent
O000ANatural Zeolite Absorbent
O043Rust & Corrosion Preventive - Penetrant & Lubrication
O042General Purpose Lubricant &Corrosion Inhibitor
O040Rust & Corrosion Preventive - Penetrant & Lubrication
O044Rust & Corrosion Preventive - Penetrant & Lubrication
Page 5 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification
Product Brochure For P177
Sydney: (02) 9890 9111Brisbane: (07) 3715 2200
Melbourne: (03) 9212 4422Perth: (08) 9373 9999
O004Superdraulic 46 Hydraulic Oil
Powered by TCPDF (www.tcpdf.org)
Page 6 of 630/12/2021 11:21 PM Specifications and prices are subject to change without notification