2
CONSTRUCTION • DIE-FORMED STEEL HOUSING AND ENDS EXCEED CODE GAUGE. • Heavy duty ends securely fastened to tHe HOUSING. • steel/aluminum sourced from usa origin. • side mounted t-bar clips. • premium reflectance, low glare matte wHite reflector pro- vides soft, uniform indirect ligHt distribution. • Quick access plate for convenient power CONNECTION. • designed for nema type g (grid). • consult factory for compatibility witH otHer ceiling systems. • center mounted extruded aluminum ligHt bar provides supe- rior Heat sinking. • ligHt bar designed and positioned to prevent direct line of SIGHT TO LED’S. • indirect distribution of soft ligHt creates superior brigHtness control and balanced ligHt witHout tHe typical led glare. • excellent for use wHere comfortable INDIRECT LIGHTING IS DESIRED. • great alternative to suspended ceiling ligHting systems. • Hospitals and HealtH care facilities to provide visual comfort. • lobbies, corridors, scHools or offices to ENHANCE THE INTERIOR DESIGN. • HigH efficacy indirect led ligHt system. APPLICATION FINISH • exposed HigH performance matte wHite internal reflector system witH premium grade optical finisH for superior ligHt distribution, HigH efficacy and low glare. AIRLED SERIES ADVANCED INDIRECT RECESSED LED LUMINAIRE BACK ACCESS ONLY LISTED • HigH efficient driver and long life led’s provide years of Quality maintenance free operation. • suitable for dry locations. (damp optional) • i.b.e.w. labeled. •10 year limited warranty on led boards and drivers. • minimum 60,000 Hours @ l85 • 0-10v dimming standard to 1% • lumen/wattage tuning available. (CONTACT FACTORY FOR OPTIONS) • driver Quick disconnect standard wHere reQuired by code. • 80+ cri std. CERTAIN VERSIONS DLC QUALIFIED. CHECK WWW.DESIGNLIGHTS.ORG FOR LIST OF SPECIFIC QUALIFIED CONFIGURATIONS UNDER THE “QUALIFIED PRODUCTS LIST” TAB. ELECTRICAL Job______________________________________________ Type_____________________________________________ CATALOG # LUMAX INDUSTRIES, INC. 301 Chestnut Avenue Altoona, PA 16603-0991 814-944-2537 Fax 814-944-6413 www.lumaxlighting.com SERIES LUMENS KELVIN FIX AIRLED 21L 29L 41L 57L 21L 34L 44L 60L 65L 77L 88L 98L 21L 30L 42L 52L 65L 77L 85L 95L 19L 28L 39L 53L 3k, 35k, 4k, 22 24 14 12 ** LUMENS: “see performance cHart on back page” KELVIN: 3k = 3,000 kelvin 35k = 3,500 kelvin 4k = 4,000 kelvin VOLTAGE: 5 - 347v 9- 120-277 INTERIOR FINISH: HR - HIGH REFLECTANCE OPTIONS: em1 - 500 - 700 lumen battery pack em2 - 1100 - 1400 lumen battery pack sdim - step dimming lde1 - lutron Hi-lume 1% ecosystem witH soft-on, fade-to-black lde5 - lutron 5% ecosystem dimming dl - damp location ccea - city of cHicago environmental air FLEX: fx1 - 6’ metal flex, 18/3 - 1 circuit, no 0-10v leads fx2 - 6’ metal flex, 18/4 - 1 circuit, witH non-switcHed em lead, no 0-10v leads fx8 - 6’ metal flex, 18/5 - 1 circuit, witH 0-10v leads fx9 - 6’ metal flex, 18/6 - 1 circuit, witH non-switcHed em lead & 0-10v leads CONTROLS: isop - integrated sensor witH occupancy and pHotocell CONTROL ACCESSORIES: 61683 - ceiling mount sensor (max 4 luminaires per sensor) 61684 - wireless wall switcH “ single gang / double rocker reQuired for full functionality of isop sensor” (max 40 sensors per switcH) ACCESSORIES: FLANGE KITS: fk - 14 fk - 22 fk - 24 ORDERING GUIDE EXAMPLE: AIRLED29l4k22-9Hr-isop CONTROLS • available witH factory installed integrated pir motion sensor and dayligHt Harvesting pHotocell, botH combined into one luminaire mounted sensor. sensor is wireless from wall switcH (purcHased separately) to luminaire. one switcH can operate up to 40 sensors using a field app; left side of switcH - on/off and dim, rigHt side of switcH to set additional ligHt levels and creating scenes. in addition to tHe wireless wall switcH, an intuitive android based app makes grouping, configuration and commissioning easy during or after installation. no need to run 0 to 10v wires to control a fixture witH tHis sensor option, making installation mucH simpler. also available witH a ceiling-mount sensor option allowing up to four luminaires to be controlled by one sensor witH tHe same FEATURES AS THE INTEGRATED SENSOR.
