JAENVIROTANKS Catalogue Solutions

THE E SOLUTION N PROVIDERS

Design n and d manufacturre e of

THEE OLUTIONSO N ROVIDERSPR

Designn ndand anufactuma ree ofoSTORAGE TANKS FOR ALL PURPOSES

ENCLOSED BUNDED ABOVEGROUND TANKSDOUBLE SKINNED BELOWGROUND TANKS

Contents

Aboveground Enclosed Bunded Storage TanksEnvirotank Rectangular 4T64 Range - Envirotank Cylindrical 5T34 Range - Envirotank Rectangular 6With Removable Pitched Roof 7Bio Envirotank 8-9

Belowground Double Skin Storage TanksEnvirotank Cylindrical 10-11

Other Enclosed Bunded Storage TanksGravity Feed Envirotank Rectangular 12Autolube Envirotank Rectangular 13

Open Bunded Storage TanksCylindrical 14Rectangular 15

Vertical Storage TanksOpen Bunded Cylindrical Tanks 16Cylindrical Single Skinned Tanks (Type D on legs/skirt) 17Cylindrical Single Skinned Tanks (Type G flat bottom) 18V2 Range - Cylindrical Enclosed Bunded Storage 19

Horizontal TanksCylindrical Single Skin Storage Tanks 20Rectangular Single Skin Storage Tanks 21

Other TanksSpecialist Tanks 22Galvanised Open Top 23Galvanised Bolted Top 24

AccessoriesLadders (Galvanised) 25Holding Down Straps 25Typical Connections 25Support Cradles Mild Steel 26Fuel Tank Components 27Pumps & Controls 28

Other InformationVolumes, Surface Areas & Conversion Tables 29C.A.D & Manufacturing 30Suitable Storage Products 31

1E [email protected] W www.jaenvirotanks.com

Underground tanksVertical tanksLubeOil tanks

Rectangular tanksBio Fuel Storage tanks

Enviro tanksHorizontal tanks

Aboveground tanksSpecialist tanksOpen Top tanksChemical tanks

2CompleteLiquidStorageSolutions


Joseph Ash was born in 1824, the son of aBirmingham Chemist. He founded his company in1857 which took an active part in the expansion of theMidlands. In 1864 he joined John Pierce Lacy to formAsh & Lacy. At the start of the new millennium Ash &Lacy were taken over by Hill & Smith Holdings Plc,now the Parent Company.

JA Envirotanks is a trading name within Joseph AshLtd specialising in the mass production ofaboveground enclosed bunded steel tanks and burieddouble skinned steel tanks. The company hasoccupied its current site for over 150 years, alwaysspecialising in tank production with high capacitycranes and specialist welding equipment technology.

More bespoke tanks and fabrications are produced onsite from carbon steels and stainless steels whichinclude conical hoppers, chemical and process tankswith specialised linings and ladders, platforms,stairways and frames. All steelwork is galvanised bythe sister company Joseph Ash Galvanising. JosephAsh is also one of the largest galvanising operations inEurope which includes many galvanising plants withinthe UK.

The patented ENVIROTANK product range ismanufactured in Birmingham which includes enclosedbunded rectangular and cylindrical tanks which complywith The Control of Pollution Regulations and arelicensed to OFTEC standard OFS T200.

JA Envirotanks products are suitable for all fuelsincluding specially engineered tanks for the storage ofthe latest formulated bio fuels with heaters andspecialist coatings.

JA Envirotanks produce tanks with a designed life of20 years to meet the needs of aggressive commercialand industrial environments.

Located at the hub of the UK motorway network JAEnvirotanks can despatch, deliver and offload at anymainland location or port.

4Aboveground EnclosedBunded Storage Tanks

Above

gro

und

Enclo

sed B

unded S

tora

ge T

anks

UK Patent No: 2 251 021

The ENVIROTANK is a primary storage tank, externally encased within an outer weatherproof bund to ensureany leakage or nominal overfill situation is safely contained.

The ENVIROTANK is easily transportable as a one-piece unit and reduces costly and time consuming site work.

The ENVIROTANK is delivered by JA Envirotanks transport to the customers premises. If at a later date a newsite for the ENVIROTANK is required it only has to be emptied of contents, cleaned internally, uplifted andtransported to its new location.

Outer bund designed to contain 110% of the inner tank volume.Inner tank manufactured to BS799 Part 5 from Steel plate to BS EN 10 025:2004:S275.

Compliance with the control of pollution regulations.Inner tank and outer bund pressure tested.

Envirotank RectangularE61A 2273 1753 1190 1220 1118E62A 2727 2104 1190 1220 1270E63 2841 2192 1190 1220 1296E64 2954 2274 1190 1220 1348E65 3409 2631 1190 1220 1500E66 3636 2806 1190 1220 1576E67A 4546 3080 1470 1220 1800E70 5682 3845 1470 1220 2102E71A 6819 3745 1470 1500 2408E72 7955 2704 1800 1830 2510E74A 9091 3035 2408 1500 2816E75A 11364 3790 2408 1500 3278E76A 13637 4540 2408 1500 3854E78 18183 3696 3008 1830 4486E79 22729 4610 3008 1830 5506E80 27275 5532 3008 1830 6102E81 31821 6454 3008 1830 6694E82 36367 7376 3008 1830 7550E83 40913 8298 3008 1830 8282E84 45459 9220 3008 1830 9524E85 54550 11064 3008 1830 10150E60 80000 10261 3008 3048 14000E99 90000 11545 3008 3048 15479E86 100000 12830 3008 3048 16918E99 110000 11780 3008 3650 17905E87 120000 12870 3008 3650 19295E88 140000 12500 3618 3650 22445E89 180000 14850 3960 3600 27000E90 200000 16500 3960 3600 30212E91 220000 18150 3960 3600 33500

Ref Capacity Length Width Height WeightLitres (Excl cabinet)mm mm mm (Approx)Kg


T64 Range

Envirotank Cylindrical

Enclosed bunded tank Space saving (smaller footprint) Reduced maintenance costs Weatherproof (Tank & Bund Enclosed) Cuts costly site work Needs only suitable level hard standing Overfilled product can be re-used Easily transportable Sizes/capacity to suit most situations Finished in green or black oil resistant paint Clients own in-house colours can be

accommodated on request Offloading and positioning facilities available

if required The optional security cabinet will extend the

overall length of the unit by 750mm.

T56 5000 3610 1500 2 1449T57 7000 3120 1900 2 1773T58 10000 4400 1900 2 2281T59 12000 5260 1900 2 2621T60 15000 3980 2500 2 3190T61 20000 5230 2500 2 3870T62 25000 6470 2500 3 4653T63 30000 7715 2500 3 5320T64 35000 8955 2500 4 6490T65 40000 10163 2500 4 6800T66 45000 11570 2500 5 7960T67 50000 12648 2500 5 8502T68 55000 14090 2500 6 9529T69 60000 10470 3000 5 10830T70 70000 12100 3000 5 11730T71 80000 13760 3000 5 13043T72 90000 12400 3390 5 13803T73 100000 13750 3390 5 14950T74 120000 16400 3390 6 17600

Ref Capacity Length Nom Dia Cradles WeightLitres mm mm (Approx)Kg

Advantages

50, 65 or 80mm fill pipe c/w valves, tankercoupling and cap

Venting assembly sized to suit Sludge drain pipe 40mm outlet pipe with valve Electric bund monitoring with alarm Contents guage in litres Overfill alarm and/or overfill prevention valve Dipstick, dip pipe, cap and chain Dispensing pumps with safety break couplings

and automatic nozzle (3m hose supplied) Fuel monitoring systems Optional galvanised ladder and platform Optional distribution board and lighting Optional security cabinet with aluminium roller

shutter door and steel doors.

Additional Fittings

Galvanised ladder andplatform (optional)

Multi compartment tanks available.Maximum size up to 120,000 litres on request.(ie for Diesel/Gas oil/Lube oil)

Open Mesh or Durbar Plate Flooring

Lockable Security Hatch CoveringCritical Connections

Above

gro

und

Enclo

sed B

unded S

tora

ge T

anks

Benefits:-Cylindrical Tanks due to their shape

free up more useable volume from thetank. Un-restricted access inside the

tank for cleaning and inspection.Specialised linings can be applied

internally (i.e. for aircraft fuels) Greater external surface areais visible for inspection and

future maintenance.


6T34 Range

Envirotank RectangularT30 2000 1180 1100 1830 865T31 3000 1660 1180 1830 1027T32 5000 2260 1460 1830 1531T33 7000 2520 1790 1830 1940T34 10000 3590 1790 1830 2540T35 15000 4020 2398 1830 3395T36 20000 5360 2398 1830 4285T37 25000 6700 2398 1830 5162T38 30000 6410 3008 1830 5828T39 40000 8550 3008 1830 7474T40 50000 10690 3008 1830 8947T41 60000 10660 3618 1830 9707T42 70000 12440 3618 1830 11790T43 80000 14220 3618 1830 13316

Ref Capacity Length Width Height WeightLitres mm mm mm (Approx)Kg

Above

gro

und

Enclo

sed B

unded S

tora

ge T

anks

The ENVIROTANK is an inner storagetank, externally encased within an outerweatherproof bund to ensure anyleakage or nominal overfill situation issafely contained.

The ENVIROTANK is easilytransportable as a one-piece unit andreduces costly and time consuming sitework.

The ENVIROTANK is delivered by JAEnvirotanks transport to the customerspremises. If at a later date a new sitefor the ENVIROTANK is required it hasonly to be emptied of contents, cleanedinternally, uplifted and transported to itsnew location.

Lockable Security Hatch CoveringCritical Connections

Galvanised ladder andplatform (optional)



Enclosed bunded tank Space saving (smaller footprint) Reduced maintenance costs Weatherproof (Tank & Bund Enclosed) Cuts costly site work Needs only suitable level hard standing Overfilled product can be re-used Easily transportable Sizes/capacity to suit most situations Finished in green or black oil resistant paint Clients own in-house colours can be

accommodated on request Offloading and positioning facilities available

if required The optional security cabinet will extend the

overall length of the unit by 750mm.

Envirotank SafeS30 2000 1180 1100 1830 1136S31 3000 1660 1180 1830 1344S32 5000 2170 1485 1830 1954S33 7000 2520 1790 1830 2448S34 10000 3590 1790 1830 3171S35 15000 4020 2398 1830 4195S36 20000 5360 2398 1830 5267S37 25000 6700 2398 1830 6326S38 30000 6410 3008 1830 7102S39 40000 8550 3008 1830 9075S40 50000 10690 3008 1830 10876S41 60000 10660 3618 1830 11825S42 70000 12440 3618 1830 14201S43 80000 14220 3618 1830 16023

Ref Capacity Length Width Height WeightLitres mm mm mm (Approx)Kg

Advantages

50, 65 or 80mm fill pipe c/w valves, tankercoupling and cap

Venting assembly sized to suit Sludge drain pipe 40mm outlet pipe with valve Electric bund monitoring with alarm Contents guage in litres Overfill alarm and/or overfill prevention valve Dipstick, dip pipe, cap and chain Dispensing pumps with safety break couplings

and automatic nozzle (3m hose supplied) Fuel monitoring systems Optional galvanised ladder and platform Optional distribution board and lighting Optional security cabinet with aluminium roller

shutter door and steel doors.

Additional Fittings

Above

gro

und

Enclo

sed B

unded S

tora

ge T

anks

BenefitsEnclosed Bunded Storage Tank with

Secondary Removable Pitched Roof for Total security

The ENVIROTANK SAFE is an inner storage tank, externally encasedwithin an outer weatherproof bund to ensure any leakage or nominaloverfill situation is safely contained.

The top connections, pipework and manway are enclosed by asecondary roof section for total security.

The ENVIROTANK SAFE is easily transportable as a one-piece unitand reduces costly and time consuming site work.

The ENVIROTANK SAFE is delivered by JA Envirotanks transport tothe customers premises. If at a later date a new site for theENVIROTANK SAFE is required it has only to be emptied of contents,cleaned internally, uplifted and transported to its new location.

Outer bund designed to contain 110% of the inner tank volume,manufactured to BS799 Part 5 from Steel plate to BS EN 10025:2004:S275.Compliance with the control of pollution regulations.Inner tank and outer bund pressure tested.

450mm

1,830mm

Padlockableaccess hatch

Padlockablesteel doors


8Above

gro

und

Bio

-Envi

rota

nk

Bio-EnvirotankRef Capacity Length Width Height Weight

Litres mm mm mm (Approx)Kg

BE1BE2BE3BE4BE5BE6BE7BE8BE9BE10BE11BE12BE13BE14

250050007500

1000015000200003000040000500007000090000

120000140000180000

1410261037603310508055606740716488649626

12276154761607617905

14601460146020102010241024103030303030083008316031603600

20002000200020002000200024002400240030483048304834003400

13722202293733064680555773729025

108391570219438242492648430700

A unique design (Pat App 2 477 266) comprising a primary storagetank without internal structure to enable ease of internal inspection andcleaning. The base of the tank has a sloping hopper style bottom to asump, the sump being serviced by a 25mm sludge drain pipeaccessible from the tank top.

The concept with correctly positioned manway inspection pointsallows tank cleaning without man entry reducing the need for confinedspace entry health and safety procedures.

The primary tank is enclosed by an outer steel bund that fully complieswith the control of pollution regulations, the bund holding the innertank capacity plus 10% (110% containment).

The tank can be split into compartments for gas oil/diesel/oils/Adbluand process liquids. Internal tank linings can easily be applied due tothe unrestrictive internal tank construction.

External manways and connections are enclosed within a steel securehatch which is padlockable to prevent tampering.

End or side mounted security cabinets can be fitted including steel orroller shutter doors and integral spillage trays, to house pipework,pumps, gauging, alarms and controls.

Designed life 20 years.

Inner tank and outer bund pressure tested.

Design for the FutureWith developing Bio-fuels water contentand bacterial growth is becoming more ofan issue in tanks; regular tank cleaning andinspections are now necessary.

Entering tanks presents health and safetyconcerns and by constructing a tank withfree internal space (no cross stays) makesentry and egress easier and safer. Accessand retrieval of remotely controlled cleaningtechnologies (non man entry systems) isalso more practical with Bio-Envirotanks.

The incorporation of sloping bases andsumps helps reduce the frequency ofcleaning as water and contaminants willeasily drain into the sump. Residues areextracted via the sludge drain pipe whichruns from the tank top to the sump.

Bio-EnvirotankRectangular AbovegroundEnclosed Bunded StorageTanks (Inner tank externallystiffened and with a slopinghopper style bottom)


Enclosed bunded tank design Reduced maintenance costs Needs only suitable level hardstanding for siting Easily transportable Lifting eyes for offloading Overfilled product can be reused Fill pipe sizes 50mm/65mm/80mm complete

with isolation valve Tanker coupling and cap and chain Venting systems to suit fill size 25mm desludge pipe to sump 50mm outlet pipe for gravity feed or top suction 50mm and 80mm overfill prevention valves

available to shut off the tanker fill when theprimary tank reaches capacity

Electronic low level and overfill alarm units Electronic bund warning alarm units Transfer pump sets available to feed boilers and

generators Dispensing pumps available with automatic

nozzles Fuel monitoring systems fitted to suit customer

needs.

Features

Above

gro

und

Bio

-Envi

rota

nk

Specialist Features (optional)

50mm/65mm/80mm vent dryers tominimise moisture and condensation

Internal linings to keep fuel sterile andprevent corrosion

Stainless steel pipework and fittings. Specialist filters including magnetic filter

technology in order to reduce bacteria inthe tank bottom.

Optional Bolt onPitched Roof tosecure all TopPipework & Tank Entries

Cabinet with aluminiumroller shutter door

(optional)

Lockable security hatchover manway andcritical connections

Outer Bund

Internal suction pipe

Internal desludgepipe to sump

Universalbeam bearers

450mmdiameter sump

Inner tank withhopper base to sump

Gauge

Fill Pipe

Pumping options

Overflow prevention device

AlarmPanel

Ladder & walkway (optional)

HeatingLow pressure hot water and steam coils can be built into the tankbottom if needed or electrically powered submersion heaters.All heating can be provided with temperature sensors and controlthermostats.

Lagging and cladding can be added to the outside of the unit forheating efficiency.

Gauging Hydrostatic gauges in litres Electronic gauges in litres Differential and level measurement systems for closed vent tanks Water monitor indicators are available with electronic gauges

ElectricalLighting, wiring and distribution boards with isolators to suitequipment fitted.

Heating Options Low pressure hot water coils Steam coils Immersion/submersion heaters Lagging and cladding to minimise heat losses

Cabinets Side cabinets and end cabinets Roller shutter doors or steel hinged doors

Access Vertical caged ladders and walkways Ships ladder and walkways Stairway to walkway All galvanised finish with open mesh or chequer plate flooring

10

Belo

wgro

und

Double

Skin

Sto

rage T

anks

Belowground Double SkinStorage Tanks

Holding down straps with ratchet tensioners Content gauges Dipsticks Overfill prevention valve with or without offset fill adapters Internal fill pipes Internal suction pipes Leak detection device (intrinsically safe) complete with reservoir,

alarm unit, relay and probe Installation kit for leak detection device Four litre container of leak detection fluid for filling reservoir on site Manway flanges for connection GRP access chambers.

Advantages

Additional Fittings

Continuous monitoring for total environmental protection Product stocks are safely contained Tank continuously under test throughout its life Tanks can be encased in a suitable granular or concrete back fill Multi compartment tanks are available to customers requirements Simplicity of design reduces costly site time Design approved by leading oil companies Manufactured at our Birmingham facility ideally suited on the hub

of the UK motorway network Accurate gauging systems available (magnetostrictive and

ultrastronic).

The Belowground ENVIROTANK is the latest conceptin the containment of hazardous fuels and chemicals,offering continuous protection to the surroundingenvironment. With its unique Leak Monitoring Systemthe ENVIROTANK will warn you if failure should occurwithout any loss of product.

The ENVIROTANK is produced from Certified CarbonSteel for strength and protected externally with twocoats of black bitumen or a tough corrosion resistantpolyurethane coating, spark tested prior to despatch.The cavity between the inner and outer skin is filled atour works with specialised leak fluid and sealed priorto despatch. Designed for 98% containment ofproduct and can be supplied with overfill preventionvalves if required. The inner tank and outer skin arepressure tested at our works and certificates issued.The ENVIROTANK is normally delivered by our ownfleet of vehicles in order to ensure delivery schedulesare maintained. Since being established in 1857 J AEnvirotanks are one of the leading suppliers to thePetroleum industry.

Our design is similar to storage tanks installed inEurope for the last 20 years. Manufactured to BS EN12285-1:2003. From Steel plate to BS EN 10 025:2004: S275

Compliance with the control of pollution regulations.

Cable joint to fieldconnections

Fill pipe

Vent pipe Manwayflange

Overfillprevention valve(Schematic)

Suction pipe

Leak detectorprobe

For high water-tables,install reservoir outsideManway Chamber Fluid reservoir

(Zone 0 certified)

Alarm panel(with BMS contacts)

Fluid ventconnection

For concrete infilltank to rest onfoundation slab

2 layers of a 193 meshreinforcement

(Schematic)Install OPVs tomanufacturersinstruction

Tank Lashwoven nylonstraps

Pea shingle, dry sandor concrete infill


Belo

wgro

und

Double

Skin

Sto

rage T

anks

Envirotank CylindricalRef Capacity O/A Length Inside Dia O/A Length Outer Dia Weight

Litres (inner tank)mm (inner tank)mm (outer tank)mm (outer skin)mm (Approx)Kg

EU01EU02EU03EU04EU05EU06EU07EU08EU09EU10EU11EU12EU13EU14EU15EU16EU17EU18EU19EU20EU21EU22EU23EU24EU25EU26EU27EU28EU29EU30EU31EU32EU33EU34EU35EU36EU37EU38EU39EU40EU41EU42EU43EU44EU45

2,0005,0007,00010,00012,00013,63713,63715,00018,18418,18420,00022,72922,72925,00025,00027,27527,27530,00030,00031,82131,82135,00036,36836,36840,00040,00040,91340,91345,45945,45950,00050,00054,55154,55155,00060,00060,00068,18968,18970,00080,00090,000100,000120,000130,000

1,4043,2352,8033,9704,7252,7083,1805,9003,5154,1534,6104,2685,0805,6704,7705,0306,0456,8105,6705,7917,0057,6786,5537,9688,6567,2397,3158,8488,0529,80210,7549,1909,75411,70911,80312,85310,99012,16814,57110,07411,60713,14214,67617,74414,916

1,5001,5001,9001,9001,9002,7432,5001,9002,7432,5002,5002,7432,5002,5002,7432,7432,5002,5002,7432,7432,5002,5002,7432,5002,5002,7432,7432,5002,7432,5002,5002,7432,7432,5002,5002,5002,7432,7432,5002,9862,9862,9862,9862,9863,350

1416325028153985474027203192591535274165462542805092568547855042605468255685580370177690656579808668725173278860806498141076692059766117211181512865110051218014583100861161913154146881775614928

153015301930193019302773253019302773253025302773253025302773277325302530277327732530253027732530253027732773253027732530253027732773253025302530277327732530301230123012301230123384

90012001900210026002800280030003375337537004100410044004400467046705300530053805380605058305830670067006750675072007200815081508510851086509700970010410104108795992911065122001447015996

12

Gra

vity

Feed

Enclo

sed B

unded S

tora

ge T

anks

The most cost effective and environmentally safe way of storing anddispensing gas, oil, diesel and kerosene. Ideal for fuelling plant atbuilding sites and smaller transport operations.

The Gravity Envirotank can also be coupled into small standbygenerator and boiler installations.

The Envirotanks compact design allows it to take up the minimum ofspace. Being a totally self contained, ready-to-use sealed unit, makesit easily movable when empty and gives low maintenance as norainwater can enter the bunded area.

The bund is designed to contain 110% of the primary tank volume.Manufactured generally to BS 799 Part 5 Type J 2010. From Steelplate to BS EN 10 025: 2004: S275


Gravity Feed EnvirotankRectangular EnclosedBunded Storage Tanks

Outer skin designed to contain 110% ofinner tank volume.

Notes

One coat of zinc phosphate primer, one coatof green oil resistant paint.

FinishOptions

Ball valve, hose and nozzle can be suppliedif a flow meter is not required.

D01 1364 1750 1170 1220 814 3D02 2273 2350 1170 1220 986 3D03 2727 2670 1170 1220 1024 3D04 3636 3300 1170 1220 1323 3D05 4546 3950 1170 1220 1515 3D06 5682 4750 1170 1220 1740 3D07 6819 3850 1474 1500 1846 3D08 9091 4865 1474 1500 2273 3

Ref Capacity Length Width Height Weight Thickness Litres mm mm mm (Approx)Kg mm

A built in end security cabinet. A standard feature.

Tank and Bund Bolt together

Access step

800

300

1450

100

750

HE

IGH

T

TANK ELEVATED FOR GRAVITY FEED

TANK ELEVATED USING BUND STRUCTURE


Electric oil dispersing pump complete with flowmeter, hose and nozzle. Suitable for a 240V,50Hz, single phase electricity supply, (pulseoutput optional if connection to a fuelmanagement system is required)

Waste oil tank with sump and extractor pipe.

Options

Lubricator on air operated pumps filledwith anti-freeze for external use,recommended air inlet pressure 90lb/in2

Pulse transducers and solenoid valves canbe fitted for connection to fuelmonitoring/management systems.

Notes

One coat of zinc phosphate primer, one coat ofgreen oil resistant paint.

Finish

Auto

lube

Enclo

sed B

unded S

tora

ge T

anks

AutolubeEnvirotankRectangularEnclosed BundedStorage Tanks

D09 938 1524 610 1219 375 3D10 1063 1727 610 1219 398 3D11 1266 2050 610 1219 452 3D12 1730 1376 1210 1245 491 3D13 2558 2031 1210 1245 651 3D14 4242 2815 1210 1500 891 3D15 2110 1691 1210 1245 590 3D16 2354 1869 1210 1245 640 3

Ref Capacity Length Width Height Weight Thickness Litres mm mm mm (Approx)Kg mm

The latest technology in the storage of lubricating, gear andhydraulic oils, etc.

Autolube Envirotank is one of the most environmentallysafe ways of storing most workshop fluids. Specificallydesigned with slimline dimensions to fit into the smallest ofworkshop areas.

The Autolube Envirotank can also be sited externally withvery little maintenance as being a sealed unit no rainwatercan enter the bunded area.

Various fittings are available to suit your requirements, so theAutolube Envirotank can be delivered to site ready to use.

Outer skin designed to contain 110% of the inner tankvolume. Manufactured generally to BS 799 Part 5 Type J2010. From Steel plate to BS EN 10 025: 2004: S 275



Air pump

Manway cover

40mm full socketc/w plug (spare)

Oil resistantrubber hose

Hose reel(Spring return type)bracketed to tankwith 8 metres of hose

50mm vent

Drain

50mm fill assemblywith cap and chain

Contents gauge

Two lifting lugs

R.S.C. supports stitchwelded to base

Commercial rose endmeter or precision hoseend for resale


Vent assembly

14

Cylindrical

Bunded Storage Tanks

B31B32B34B35B36B37B38B39B40B41B42B43B44B45B46B47

1545 x 1500 2895 x 15003575 x 19004415 x 19005255 x 19004325 x 24865305 x 24865029 x 27435791 x 27436502 x 27437315 x 27438051 x 27439754 x 2743

10262 x 300011225 x 300013564 x 3000

2438 x 2110 x 5103658 x 2110 x 6804190 x 2743 x 9145235 x 2743 x 9146285 x 2743 x 914

5075 x 3048 x 15006055 x 3048 x 15005791 x 3484 x 15006813 x 3658 x 15007432 x 3658 x 15008362 x 3658 x 15009136 x 3658 x 1500

10839 x 3658 x 150010973 x 3658 x 182911938 x 3658 x 189014326 x 3658 x 1981

2222222222334445

6666666666666666

6666666666666666

227045469091

11364136371818822729272753182136367409134545954551681897500090918

117019402910357036604540541060006650746082008790

10000118101300115739

Ref Tank Size Tank Thk Cradles Capacity Bund Size Bund Thk Weight(L xDia) mm mm Litres (LxWxH)mm mm (Approx)Kg

Bunded S

tora

ge T

anks

Time consuming site construction work for the installation of tanksto store diesel fuel, white spirit and other semi-hazardous liquids isno longer a problem.

A tank within a tank or Bunded Tank by the Birminghamspecialists, J A Envirotanks needs only a suitable hard standing. Ithas the very useful additional advantage of being portable from siteto site.

This tank is available in a range of sizes from 1,000 litres up to100,000 litres. The outer Bund tank normally has a capacity of110% compared with the inner tank to ensure any leakage is safelycontained.

The complete package comprises the storage tank, fitted inside itsBund tank, all ancillary pipework, valves, contents gauge, caps andlifting lugs. A dispensing pump and fuel monitoring equipmentcan also be fitted, if required, with all pipework connectedand wired to the isolating switch. After connection to amains supply the package is ready for use.

Fabricated from mild steel plate the tanks areprotected by a zinc phosphate alkyd primerand a coat of gloss finish paint forweatherproofing.

J A Envirotanks deliver the completepackage as a unit to the customerspremises. If, at a later date, a new site forthe Bunded tank is required it only has tobe emptied of liquid, lifted onto a truckand transported to its new location.

Bund designed to contain 110% of theinner tank volume. Manufactured to BS799Part 5 2010 from steel plate to BS EN 10025: 2004: S275. Compliance with thecontrol of pollution regulations.

Galvanised ladder and platform optional

Lift lugs

Inner tank to BS 799 Part 5Type A & EN 12285-2


B01B01AB02B03B03AB04B04AB05B05AB06B06AB07B07AB08B09B10B11B12B13B14

1829 x 1219 x 12191829 x 1219 x 12192438 x 1219 x 15003048 x 1219 x 15003048 x 1219 x 15003048 x 1500 x 15003048 x 1500 x 15003048 x 1219 x 24383048 x 1219 x 24383048 x 1500 x 24383048 x 1500 x 24383048 x 1828 x 24383048 x 1828 x 24383048 x 2438 x 24383962 x 2438 x 24384572 x 2438 x 24385486 x 2438 x 24386096 x 2438 x 24386096 x 2438 x 27436096 x 2438 x 3048

2438 x 1828 x 6862438 x 1828 x 6863048 x 1828 x 9143657 x 1828 x 9143657 x 1828 x 9143657 x 2311 x 9143657 x 2311 x 914

3962 x 2133 x 12193962 x 2133 x 12194191 x 2438 x 12194191 x 2438 x 12193657 x 2787 x 15003657 x 2787 x 15003657 x 3561 x 15004876 x 3484 x 15005486 x 3352 x 16766400 x 3352 x 16767010 x 3352 x 17017315 x 3352 x 18297315 x 3352 x 1981

53555556565656666666

55565656565656666666

272727274457557355736858685890919091

1114611146136371363718183227292727531821363674091345459

1050910

150018001500215018002880250034903090382033204420553060906920742085009230

Ref Tank Size Tank Thk Capacity Bund Size Bund Thk Weight(LxWxH)mm mm Litres (Brimful) (LxWxH)mm mm (Approx)Kg

Optional Equipment

Bunded S

tora

ge T

anks

Rectangular

50mm/65mm/80mm diameter fill pipe withvalve and brass cap

Vent complete with bird guard 25mm diameter sludge complete with valve

and plug 40mm diameter draw off complete with valve Hydrostatic contents gauge complete with

capillary tube and bracketed to the bund tank New commercial high speed pump with 12

months warranty Low duty pump suitable for fork trucks, etc., or

one high-speed new pump complete with fuelmonitoring equipment recording the fuelallocated to each vehicle 25 fobs

Flowmeter fitted with manual nozzle (elevatedtanks only) suitable for fork trucks

All electric pumps wired to firemans switchmounted on bund. All pumps supplied withautomatic cut off nozzle

Access ladder and platform in galvanised finish Cabinet with lockable doors (optional) cabinet

will extend the overall length by 750mm.

Lifting lugs

One coat of zinc phosphate primer, onecoat of green oil resistant paint

Inner tank manufactured generally to BS799 Part 5 Type J

Screwed or Flanged connections available Pipe work fitted to suit application Compliance with CoP regulations Outer bund to contain the capacity of the

inner tank plus 10% Inner tank pressure tested Bund tested sound.

16

Vert

ical

Cyl

indri

cal

Bunded S

tora

ge T

anks

Tank and Bund from 6mm thick mild steel plate

B61B62B64B65B66B67B68

B69B70B71B72B73B74B75B76B77B78

1500 x 15451500 x 28951900 x 35902486 x 29052486 x 34002743 x 33523000 x 3505

2743 x 50292743 x 64772743 x 80512743 x 9753

3000 x 102612743 x 64772743 x 80512743 x 9753

3000 x 102613000 x 11227

1981 x 1981 x 6861981 x 1981 x 13902438 x 2438 x 17752935 x 2935 x 15242935 x 2935 x 18283200 x 3200 x 19813657 x 3505 x 1981

4114 x 3656 x 19813810 x 3656 x 28964724 x 3656 x 28965638 x 3656 x 28965638 x 3656 x 36567010 x 3656 x 19818382 x 3656 x 19819753 x 3656 x 1981

12115 x 3656 x 198112115 x 3656 x 2200

1111111

1111122222

227045459120

11364136381818322730

27275363684545054551681897273590919

109103136379150000

Ref Inner Tank No of Capacity Bund Size(DiaxH)mm Tanks Litres (LxWxH)mm

All the above tanks are transported as one piece units (B61-B68)

All the above tanks are transported as seperate units to be bolted together at site (B69-B77)

Additional Fittings

50mm/65mm/80mm diameter fill pipewith valve and brass cap

Vent complete with bird guard 25mm diameter sludge complete with

valve and plug 40mm diameter draw off complete with

valve Hydrostatic contents gauge complete

with capillary tube and bracketed to thebund tank

Pumps available to suit application

One coat of zinc phosphate primer, onecoat of green oil resistant paint

Inner tank manufactured generally to BS799 Part 5 Type G

Side manway available on inner tank only

Screwed or Flanged connectionsavailable

Pipe work fitted to suit application

Compliance with CoP regulations

Outer bund to contain the capacity of theinner tank plus 10%

Access ladders, platforms, steelwork &periphery hand railing available

Inner tank pressure tested

Bund tested sound.

Non returnvalve fitted

Lift lugs

Vertical BundedCylindrical Tanks


Vertical SingleSkin CylindricalStorage Tanks

Vert

ical

Cyl

indri

cal

Sin

gle

Skin

Sto

rage T

anks

V01 2273 1.528 1.494 6 460V02 2841 1.867 1.494 6 530V03 3409 2.207 1.494 6 630V04 4546 2.889 1.494 6 790V05 5682 3.569 1.494 6 960V08 9092 3.547 1.900 6 1230V10 11365 4.389 1.900 6 1480V13 13638 5.230 1.900 6 1750V15 18184 4.320 2.486 6 1970V17 22730 5.303 2.486 6 2370V20 27275 6.286 2.486 6 2780V21 31821 7.270 2.486 6 2860V22 36367 8.253 2.486 6 3350V23 40913 6.600 2.986 6 3690V24 45459 7.281 2.986 6 3950V25 54551 8.390 2.986 6 4720V26 68189 10.262 2.986 6 5430V27 90918 13.654 2.986 6 6850V28 100010 14.935 2.986 6 7044V29 113647 16.926 2.986 6 7924V30 136377 11.735 4.000 8 11500

Ref Capacity Height Internal Dia Shell Thk WeightLitres metres metres mm (Approx)Kg

Type D

Manufactured in accordance with BS799: Part 5: Type D

All welded seams

Certified tested

Fitted with 600mm dia. Manhole with setpinned cover and gasket

Standard connections include two65mm, one 40mm and one 25mmscrewed sockets(flanged connections optional)

Finished one coat of primer/gloss finish,or to customers requirements

Steel plate to BS EN 10 025: 2004: S275

Access ladders, platforms, steelwork &periphery hand railing available.

Mounted on Steel Skirt Mounted on Legs

18

Vert

ical

Cyl

indri

cal

Fla

t B

ott

om

ed S

tora

ge T

anks Vertical Single Skin

Flat Bottomed CylindricalStorage Tanks

Manufactured in accordance with BS 799:Part 5: Type G or BS EN 14015

All welded seams

Certified tested

Fitted with 600mm dia. Manhole with setpinned cover and gasket

Standard connections include two 65mm,one 40mm and one 25mm screwedsockets

Finished one coat of primer/gloss finish,or to customers requirements

Steel plate to BS EN 10 025: 2004: S275.

V01 2273 1.528 1.494 6 460V02 2841 1.867 1.494 6 530V03 3409 2.207 1.494 6 630V04 4546 2.889 1.494 6 790V05 5682 3.569 1.494 6 960V08 9092 3.547 1.900 6 1230V10 11365 4.389 1.900 6 1480V13 13638 5.230 1.900 6 1750V15 18184 4.320 2.486 6 1970V17 22730 5.303 2.486 6 2370V20 27275 6.286 2.486 6 2780V21 31821 7.270 2.486 6 2860V22 36367 8.253 2.486 6 3350V23 40913 6.600 2.986 6 3690V24 45459 7.281 2.986 6 3950V25 54551 8.390 2.986 6 4720V26 68189 10.262 2.986 6 5430V27 90918 13.654 2.986 6 6850V28 100010 14.935 2.986 6 7044V29 113647 16.926 2.986 6 7924V30 136377 11.735 4.000 8 11500

Ref Capacity Height Internal Dia Shell Thk Base Thk WeightLitres metres metres mm mm (Approx)Kg

Type G

6666666688888

1010101010101010

Flat Bottom

Dished Top BS 799 Pt5Type G

Lifting lugs

Conical TopBS EN 14015

High load DPCmembranerecommendedbetween tank base &concrete foundation


Cylindrical

VerticalEnclosedBundedStorage Tanks

Vert

ical

Cyl

indri

cal

Enclo

sed B

unded S

tora

ge T

anks

V2 Range

V201V202V203V204V205V206V207V208V209V210V211V212V213V214V215V216V217

10000 15000 20000 25000 30000 35000 40000 50000 60000 70000 80000 90000

100000 110000 120000 130000 140000

4290402552156405759571808150

1010010160117909970

111701237013570114401236013280

68888

101010101010101010101010

55555555556666666

66666666668888888

19002500250025002500274327432743300030003500350035003500400040004000

282537394573527560566700739387829757

1102613863152451662718010180711928020489

Ref Capacity Height Diameter Shell Thk Base Thk WeightLitres mm mm Inner mm Outer mm mm (Approx)Kg

Lifting lugs

Manufactured in accordance with BS 799: Part 5:Type G & BS EN 14015 from steel plate to BS EN10 025: 2004: S275

Compliance with CoP regulations

One coat of zinc phosphate primer, one coat of greenoil resistant paint

Access ladders, platforms, steelwork & periphery handrailing available

Outer bund to contain the capacity of the inner tankplus 10%

Supplied with dished or coned roof

Access ladders, platforms, steelwork & periphery handrailing available

Screwed or Flanged connections available

External & Internal pipe work fitted to suit application


High load DPCmembranerecommendedbetween tank base &concrete foundation

20

Horizontal Single SkinStorage TanksAbove or Below Ground

Ref Capacity Overall Length Internal Diameter Plate ThicknessLitres metres metres & weight (Approx)Kg

5mm 6mm 7mm

Cyl

indri

cal

Sin

gle

Skin

Sto

rage T

anks

Single, double or multi-compartment tanks

BS 799: Part 5: Type A or Type B alsoBS EN 12285-2

Dished and flanged ends, all weldedseams

Certified tested

Fitted with 600mm dia. manhole with setpinned cover and gasket

Manufactured from steel plate to BS EN 10025: 2004: S275.

H01H02H03H04H05H08H10H13H17H19H22H23H24H25H26H27H36H28H30H31H32H37H33

227328413409454656829091

11364136371818422729272753136736367409134545954551681896818990918

100010113647115000136377

1.7532.0572.4383.2773.3533.5474.3895.2304.3205.3036.2865.7916.4777.3158.0529.754

12.16810.26213.56414.93516.91217.15011.735

1.4941.4941.4941.4941.4941.9001.9001.9002.4862.4862.4862.7432.7432.7432.7432.7432.7432.9862.9862.9862.9862.9864.000

3710380144574915525361247225722591179365

105501069811110

400440520653

457521622787953

122914701749196523682776285133433686394047115419541968387034791480268590

Cylindrical


Recta

ngula

r S

ingle

Skin

Sto

rage T

anks

BS 799: Part 5: Type J or K

Internally stayed as necessary

Certified tested

Fitted with 600mm dia. manhole with set pinnedcover and gasket

Standard connections include two 65mm, one40mm and one 25mm screwed sockets

Calibrated dipstick/gauge and other fittings ifrequired

Manufactured from steel plate to BS EN 10 025:2004: S275.

Ref Capacity Length Width Depth Plate ThicknessLitres metres metres metres & weight (Approx)Kg

3mm 5mm 6mm

R00R01R02R03R04R05R06R07R08R09R10R11R12R13R14R15R16R17R18R19R20R21R22R23R24R25

100022722727284129543409363644574545548655736858795590918916

1114713377136371818322729272753182136367409134545954551

1.2001.5241.8291.9051.9812.2862.4382.4383.0482.4383.0483.0482.4383.0482.4383.0483.6583.0483.0483.9623.6584.2674.8775.4866.0966.096

1.2001.2191.2191.2191.2191.2191.2191.5001.2191.5001.5001.5001.8292.4382.4382.4382.4382.4382.4382.4383.0483.0483.0483.0483.0483.048

7001.2191.2191.2191.2191.2191.2191.2191.2191.5001.2191.5001.8291.2191.5001.5001.5001.8292.4382.4382.4382.4382.4382.4382.4383.048

180305343343356394423470495495559

432483495508572598686686711812914965

1127

559635648674750788901940940

1051120412551476140816391927182522432753305133473775414147625075

Rectangular

Standard Connections

Inclusive of B.S.P screwed bosses to BS 21 Aboveground tanks finished in two coats of

primer or one coat zinc alkyd primer and onecoat of oil resistant gloss finish

Alternatively finished to customersrequirements

Calibrated dipstick, gauge, alarm and otherfittings if required.

22

Specia

list

Fabri

cati

ons

Special Tanks

J A Envirotanks specialise in bespokefabricated Vats, Tanks, Silos, Hoppers &Steelwork to meet your specific project needs

We Manufacture in Carbon Steel and StainlessSteel (316/304)

Certain size tanks & structures can be hotDipped Galvanised to BS EN 1461 at one ofour many Galvanising plants

All welded steel itemscan be grit blasted &painted externally& internally lined to suitspecific requirements.


Galv

anis

ed O

pen T

op T

anks

GalvanisedOpen TopTanks BS 417: Grade A

All welded and reinforced tops, cornerplates and stayed as necessary

Galvanised after manufacture inaccordance with BS EN 1461

Sockets, stooled flanges and lifting lugscan be supplied

Painted internally for Potable & Greywater if required

Hot dip galvanising is carried out at atemperature of 450 oC and the resultantzinc coating becomes an integral part ofthe steel that it protects.

Galvanising:-Size, weight, shape, thickness and radius are all factors to beconsidered in design for galvanising to minimise distortion.

Ref Capacity Length Width Depth Capacity at Plate Cover WeightLitres mm mm mm Waterline Thick Thick (incl cover)

Litres mm mm (Approx)Kg

G01G02G03G04G05G06G07G08G09G10G11G12G13G14G15G16G17G18G19G20G21G22G23G24G25G26G27G28G29

4590

110135180230270320360450570680910

113016002270272036404458557368589090

11147133771783522279267603182034090

457610610610686736762914914

1219965

109211681524152418291829243824383048304830483048365848774877487748774877

305406432457508559584610660610762864889914

114312191219121915001500150024382438243824383048365836583658

305381432482508559610584610610787736889813914

10161219121912191219150012191500150015001500150018291981

18546886

114159191227264327423491709841

122717272137266433014116596272009289

111481426817838211762614830694

1.61.61.61.61.6

22222

2.52.52.52.5

333555555666666

.91

.91

.91

.91

.91

.91

.91

.91

.911.21.21.21.61.61.61.61.61.61.61.61.6

22222222

132023263035404548547886

104120184241272498560683852964

1071164418242090234526002730

24

Galv

anis

ed B

olt

ed T

op T

anks

Galvanised Bolted Topand Welded Top Tanks

Ref Capacity Length Width Depth Capacity at Plate Cover WeightLitres mm mm mm Waterline Thick Thick (incl cover)

Litres mm mm (Approx)Kg

G51G52G53G54G55G56G57G58G59G60G61G62

450570680910

1,1151,5672,2732,7283,6374,4585,5736,858

1219 610 610965 762 787

1092 864 7371168 889 8891500 914 8131500 1143 9141829 1219 10161829 1219 12192438 1219 12192438 1500 12193048 1500 12193048 1500 1500

327423491709826

1,2071,7272,1372,6643,3014,1165,962

2.02.52.52.53.03.03.03.05.05.05.05.0

2.02.52.52.53.03.03.03.05.05.05.05.0

116143160182210290354385712810965

1080

BS 417: Grade A

All welded and reinforced tops, cornerplates and stayed as necessary


Sockets, stooled flanges and lifting lugscan be supplied

Painted internally for Potable & Greywater if required


Galvanising:-The best quality coatings are produced when molten zinccan flow freely over all surfaces, both external and internal.

Vent & Drain holes with free flow pathways are essential atthe design stage.


Access

ori

es

AccessoriesTanklash Woven Nylon Straps

Typical Connections

Lashing Kitincludes:1 Anchor strap fitted

with protectivecorners

1 Tension strap withratchet attached

Weight 5 - 6kgs perlashing according totank dia.

Patent Appn. 81.27759

Pull webbingthrough ratchettaking-up all slack

1. To tension Pump handle andtension as tight aspossible. Closeratchet as in fig. 3

2.

Pull webbingthrough ratchettaking-up all slack

3. To release forretensioning

Push handle flatthrough 180o torelease safety catch

4.

The Ratchet Tensioner

Ladders



For details to B.S. 10B.S. 4505 etc.

BRANCHConnections can be located

in any position

PAD

Tapped B.S.P.T./B.S.P.P.

SOCKET HALF SOCKET

Studs both sides.Double Pad.

Stud one side.Single pad.

26

Cra

dle

s

CradlesMild Steel

6mm

Rad.

Fully welded to tank

Central web in twohalves shaped tosuit saddle plate

BS799: Part 5: 2010Min. Height = 150mm Cradle Form for Tanks

1,000 to 1,700 diameter

Cradle positions Three uprights Five uprights Seven uprights Nine uprights

Cradle Form for Tanks 1,700 to 2,450 diameter



Widths

J

J - Web Thk2

Ditto

Ditto

J

10mm

6mm

Rad.

Fully welded to tank

10mm

Width

5mm

Depth

Section K - KISO. Detail

Four uprights Six uprights Eight uprights




BS799: Part 5: 2010Min. Height = 150mm

Cradle positions

Steel cradles are used to support horizontalcylindrical storage tanks (single skinned, enclosedbunded and double skinned)

It is normal practise to weld the cradle to the tank

A 1:50 slope is recommended for oil tanks

A 1:30 slope is required for aviation fuel tanks

Finish to match the tank.

Solid Cradles

Formed Cradles


Fuel

Tank C

om

ponents

Fuel Tank Components

Silica Gel Vent Dryer

Hydrostatic ContentsGauge in litres

10 Micron WaterParticle Filter

Magnetic FuelConditioner

50mm OverfillPrevention Valve

Adjustable OPVFloat Kit

80mm OverfillPrevention Valve

To shut downfilling pipe whentank has reached

capacity

Overfill & Bund Alarm 230V acor Battery powered(Volt free contacts included) Fill Point Cabinets

Spill Kits

Electronic Gauging withoutputs for BMS

Gauge in litres

28

Pum

ps

& C

ontr

ols

Pumps & Controls

Adblue DispensingPump

Hose Reels

Automatic FuelingNozzle

Vertical pump Foot mounted pump

Electrically driven pump Air motor driven pump

Spigot mounted pump

Simplex MeshBasket Filter

Two Product FuelDispensing Pump

MONO FuelDispensing Pump

with High Hose Mast

Standard FuelDispensing Pump

Fuel Management Systems


Other InformationVolumes & Surface Areas

Useful Conversions

Oth

er

Info

rmati

on

Metres - Yards 1.0936Metres - Feet 3.2808

Millimetres - Inches 0.0394Yards - Metres 0.9144Feet - Metres 0.3048

Inches - Millimetres 25.40Sq. Metres - Sq. Yards 1.196Sq. Metres - Sq. Feet 10.7639Sq. Yards - Sq. Metres 0.8361Sq. Feet - Sq. Metres 0.0929

To convert Multiply by To convert Multiply by To convert Multiply by

Cu. Metres - Cu. Yards 1.3079Cu. Metres - Cu. Feet 35.3146Cu. Yards - Cu. Metres 0.7645Cu. Feet - Cu. Metres 0.0283

Litres - Gallons 0.2199Litres - Pints 1.7598

Gallons - Litres 4.5459Pints - Litres 0.5682

Tonnes - Tons 0.984Kilos - Pounds 2.2046

Grammes - Ounces 0.0353Tons - Tonnes 1.016

Pounds - Kilos 0.4536Ounces - Grammes 28.3495

p.s.i - bar 0.069Bar - p.s.i 14.50

p.s.i - kN/m2 6.985kN/m2 - p.s.i 0.1432

Cu. Feet - Gallons 6.250C - 0F 1.8 (+ 32)

Rectangle

Area = LBPerimeter = 2L + 2B

L

B

SphereCircle

Cone

Volume = d2 x h4

Surface Area of Cylinder = d x h

Surface Area Ends = d2 x 24

Volume = 4/3 r3Surface Area = 4r2

h = vertical heightd = diameter

d

h

r

d

Area = r2 or d2/4Circumference = d or 2r

Calculation of Volume. Part full Cylinder

c = half length of cordr = radiusv = versed sine = riser = v2 + c2

2vv = r - (r2 - c2) c = [v(2r-v)]

Volume = 1/3 r2h (h=vertical height)Curved Surface Area = rl (l = slant height)Total Surface Area = rl + r2

Cylinder

r

hl

AreasSector OABD = 1/2 (Length of arc. ABD x Radius, r)

area of circle x angle AOD in degrees .r2.360 360

Segment ABDE = area of sector OABD minus area of triangle OAD.

c

rr

D

B

A Ev

o

C Spherical D Corner E Straight Volume of TwoA Diameter B Height Radius Radius Flange Ends (litres)

1494 192 2286 38 38 340

1900 210 3200 38 38 613

2486 447 2500 95 30 2462

2743 335 3600 38 38 2201

2984 575 3000 180 35 4808

3350 472 3810 50 50 4850

4000 596 4000 38 38 8792

Dished End

AC

D

EB

Let into Tank12.7mm

30

C.A

.D &

Manufa

ctu

ring

C.A.D andManufacturing J A Envirotanks have several CAD

workstations & all drawings areproduced in electronic format(PDF, DWG & DXF).

All our storage tanks designs arecarried out using Autocadsoftware.

3D solid modelling utilises ourAutocad Inventor workstation.

JA technicians are able to createbespoke tank designs to suitspecific applications.


Typic

al

Sto

rage L

iquid

s

Certain liquids may also be storedadequately in unlined carbonsteel tanks please consult ourSales Office. Liquids

for storage in carbon steel internally coated TanksAAliphatic HydrocarbonsAlkanesAmmonia Aqueous Solution 5%Ammonia Aqueous Solution 10%Ammonia Aqueous Solution 20%Ammonia Aqueous Solution 40%Ammonium Carbonate Aqueous Sol. 5%Ammonium Carbonate Aqueous Sol. 10%Ammonium Carbonate Aqueous Sol. 25%Ammonium Nitrate (all strengths)N-Amyl AcetateAnimal Oils and FatsAromasol HAromatic Hydrocarbons (not Benzene)Aromatic Solvents (Petroleum)Aviation Fuel

BBenzineBio FuelsButanol-isoButanol-normalButyl Methacrylate

CCalcium Chloride 10%Calcium Chloride 25%Calcium Chloride SaturatedCalcium HydroxideCarbon TetachlorideCashew Nut Oil (20oC)Castor oil (up to 20oC)Caustic Soda sol. 5%, 10%, 25%, 50%China Wood Oil (up to 40oC)Citric Acid 10%Cod Liver Oil (up to 20oC)Cotton Seed Oil (up to 20oC)Crude Oil (high and low sulphur)CumemeCyclohexaneCyclohexanolP-Cymene

DDecanolDiacetone AlcoholDibutyl PhthalateDicyclopentadieneDiesel OilDiethanolamineDiethylene GlycolDi-2-(ethyl Hexyl) PhthalateDi-IsobutyleneDi-iso Butyl KetoneDi-iso-octyl PhthalateDi-n-butyl PhthalateDipenteneDodencaneDutrex

EEngine OilsEss Aviation o12 12oEsso (base) Light A SpecialEsso Medium BaseEsso Base Light AEthyl BenzeneEthylene Glycol2-Ethyl Hexanol

FFats AnimalFerric Chloride (all strengths)Fuel Oil

GGamlen Tank Cleaning Oils Gasoline Premium (103 Octane)

Gasoline Premium (Europe)Gasoline Regular (Europe)Gasoline Premium (Canada)Gasoline Regular (Canada)Gas Oil (2) (Europe)GlycerineGlycerolGrainGroundnut Oil A.V.10

HHeating Oil No.2 (Canada)Heavy Aromatic NaphthaHeptane-normalHexane-normalHexylene GlycolHigh Aromatic White SpiritHydraulic OilHydrocarbon Aliphatic

IIsobutanolIso DodecaneIso OctanolIso Octyl AlcoholIsopentaneIsoprene

JJet Fuel JP4Jet Fuel A-1

KKaydol Heavy Duty WhiteKeroseneKontol A.162

LLanolineLardLinseed OilLube OilLube Oil AdditiveLubricating Oil

MMagnesium Chloride 5%Magnesium Chloride 10%Magnesium Chloride 25%Magnesium Chloride SaturatedMineral OilsMineral Spirit

NNaphthaNaphtha Coal TarNaphtha HeavyNaphtha PetroleumNaphthenic AcidNonanolNonylphenolNonyl HeptaneNonyl HexaneNonyl ButanolNonyl Butyl AlcoholNonyl PentaneNuoplaz

OOctane-isoOctanol-isoOctyl Phenol Ethylene OxideOils AnimalOils MineralOils VegetableOiticia Oil (up to 20oC) A.V.5OleumOlive Oil (up to 20oC) A.V.10Ortho Xylene

PPalm Oil (up to 40oC) A.V.10Palm Kernel Oil A.V.5ParaffinParaffin WaxPara XylenePeanut Oil A.V.10Pentane-nPentane-isoPerilla Oil (up to 20oC) A.V.10PetrolPetroleum Solvents AliphaticPetroluem Solvents AromaticPhthalate PlasticisersPine OilPolypropylene GlycolPoppy Seed Oil (up to 20oC) A.V.10Potassium Hydroxide (up to 50%)Propylene Glycol

SSea WaterShell Oil 1984Shellsol AShellsol EShellsol TShellsol ABShellsol NShellsol RSoap SolutionSodium Carbonate (all strengths)Sodium Chloride Solution (all strengths)Sodium Dichromate Solution (up to 25%)Sodium Hydroxide (up to 50%)Sodium Hypochlorite (up to 25%)Sodium Nitrate Solutions (all strengths)Solvent NaphthaSolvesso 100Solvesso 150Soya Bean Oil A.V.10Sperm OilSunflower Seed Oil (up to 20oC) A.V.5

TTallow (acid number not greater than 5)TeepolTetrahydronaphthaleneTitanium TetrachlorideTolueneTrichlorethaneTriethylene GlycolTriton X100Triphenyl Phosphate2.2.4 Trimethyl PentaneTung OilTurpentineTurpentine Substitute

WWater BallastWater SeaWhale Oil (up to 20%)White SpiritWhite Spirit Aromatic White Spirit LowAromaticWhite Spirit High Flash

XXylolXylene Industrial (mixed isomers)

ZZ.D.D.P(Zinc Dialykl Dithiophosphate)

PO O Box ox 16, 6, Charles es Henry y ry StrStreet, t, et Birmingham, m, B12 2 0SP Member

Main n Switchboararrrrd 0121 1 622 2 4661

General l Sales 0121 1 666 6 477801210121

661 661 666

7786 476 47740121

0121 661 66

1 666 7746 47

6 4787

Drawing g OffffOffffficccce 0121 1 666 6 4779

Sales s OffffOfffffice e HoursSaless OMonday

OfffOffifyy to

e oursHoceicefio o Thursday 8:45amm -- 1:00pm8:45am

2:00pmmm -

:00pm1- 5:00pm

Friday 8:45ammm -- 1:00pm8:45am1:30pm

mm -

:00p1- 4:1

00p15p

pmppppm

E [email protected]

W wwwwww.jaenvirirrirrotanks.com

Date post:	11-Sep-2015
Category:	Documents
Upload:	nuno-jorge
View:	29 times
Download:	1 times

JAENVIROTANKS Catalogue Solutions

Documents