Jagg Oil Cooler SystemsA GUIDE TO JAGG PRODUCTS
3
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Jagg Oil Coolers 101WHAT YOU NEED TO KNOW
The Jagg philosophy has always been to provide the high-est quality oil coolers and components with an engineered balance between performance and flow.
Why oil coolers?Properly cooling the oil in any air/oil-cooled engine is im-perative to optimal performance and component longevity. Cool oil helps engines last longer...it's as simple as that!However, merely cooling your bike's vital fluid is not enough. It has become increasingly important on modern V-Twins to consider oil cooling from a systems approach. Superior performance doesn't make much sense if pres-sure drop hinders the delivery of the cool oil to the internal components of the motor that require cooling and lubricat-ing.
What sets Jagg apart?Jagg’s unique HyperFlow Technology is the engi-neered balance between performance and flow—built into every compo-nent. It should first be described as a “systems” way of thinking. It is an entire organizational dynamic dedicated to your vehicle’s oil cooling system. The study and implementation of the best possible engi-neered balance between oil cooler performance and oil system flow.Air flow, air fins, oil flow, oil turbulators, brazing technology, metal finish, oil filter adapter design, thermostatic actuator — these are each components maximized to contribute to the overall system. It is only when each individual com-ponent is considered in relation to its contribution to the whole that a true systems approach can be claimed.
Which Jagg oil cooler should I choose?Jagg has a number of options available to meet the cooling needs of the modern V-Twin. Oil cooler kits are available in fan-assisted or non-fan-assisted configurations, in either 6-row or 10-row sizes, can be chosen for either a vertical frame-mount in the direct-airflow, or a low-profile LowMount that hides below the voltage regulator. You’ve got options!Choose a 10-row oil cooler for the most demanding appli-cations, and opt for a fan if you tend to get hot in traffic. The fans run on an automatic switch that’s included in the kit. Speaking of...
What’s included?All Jagg oil cooler systems are sold with everything you need for a complete, appli-cation-specific installation, including full, easy-to-follow installation instructions.
Performance FiltrationIf you could increase oil filtration performance while also increasing oil flow, reduce restriction on your oil pump and free up power, easily open up your oil filter to inspect what you caught and then clean it out and reuse it — forever — any other option begins to sound like a cop-out.The Jagg HyperFlow Oil Filter (page 30) is all of this, and more. Absolute filtration to 30 microns and a built-in rare-earth magnet catch harmful particles before they can reach your engine. The surgical-grade stainless-steel mesh media filter can be cleaned and reused indefinitely while increasing oil flow volume and reducing the workload of the pump.The HyperFlow Oil Filter’s CNC ma-chined billet aluminum body is anodized with a signature satin titanium gunmetal finish. This filter even looks better.
Filters better. Flows better.Lasts forever.
Densely packed, mini-louvred air fins (top) provide unmatched heat exchange performance, while internal oil turbula-tors (bottom) stir oil as it passes through the oil tubes for maximum cooling.
The closer to optimum temperature an engine's oil runs, the longer the engine will run...it's as simple as that.
“Why do I need an oil cooler?”
www.jagg.com
27
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Jagg Universal Oil CoolersOIL COOLERS ONLY
Product InformationPerfect for the fabricator, the customizer, and the racer, Jagg Universal Oil Coolers are the very same oil coolers that are use in all high-quality Jagg oil cooler systems. Supplied as oil cooler cores only.
Jagg Universal Oil Coolers
Part Number DescriptionDimension
A B C MSRP
3050 6-row oil cooler with 2 mounting tabs 8.25 2.50 1.50 $185.00
3080 14-row oil cooler with 4 mounting tabs 8.25 5.25 1.50 $275.00
3090 6-row oil cooler with 2 mounting bosses 8.25 2.50 1.50 $185.00
3100 6-row oil cooler with 2 mounting bosses 8.25 2.50 1.50 $185.00
3110 6-row oil cooler with 2 mounting bosses 8.25 2.50 1.50 $185.00
3120 10-row oil cooler with 2 mounting bosses 8.25 4.00 1.50 $240.00
3130 10-row oil cooler with 2 mounting bosses 8.25 4.00 1.50 $240.00
3140 10-row oil cooler with 2 mounting bosses 8.25 4.00 1.50 $240.00
3150 10-row oil cooler with 2 mounting tabs 8.25 4.00 1.50 $240.00
3160 10-row oil cooler with 2 mounting tabs & 2 mounting bosses 8.25 4.00 1.50 $240.00
30503080
3090 3100
314031303130
31603150
3110
Product Features• Fully-brazed construction, powdercoated gloss black• Sold individually without mounting hardware
0713-0205
0713-0206
0713-0207
0713-0208
0713-0209
0713-0210
0713-0211
0713-0212
0713-0213
0713-0214
0713-02050713-0206
0713-0207 0713-0208
0713-02090713-0210 0713-0211 0713-0212
0713-0213 0713-0214
www.jagg.com
30
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Jagg HyperFlow Lifetime Oil FilterPART # 11-J77-34
Product InformationFilters better. Flows better. Lasts forever.The Jagg HyperFlow Lifetime oil filter is cleanable and reusable, high-performing, high-flowing, and looks great—what more could you want from an oil filter?High flow volume, low pressure drop, absolute filtration, and a strong rare-earth magnet combine to deliver un-matched performance and protection. Precision CNC-ma-chined billet aluminum body offers a knurled non-slip grip surface and a hex boss for easy removal.
Product Features• Disassembles without tools for easy inspection &
cleaning• Cleanable/reusable filter element• 30 micron absolute filtration• Extreme flow volume greatly exceeds OEM filters• Surgical-grade stainless steel woven element• Built-in rare-earth magnet
Harley-DavidsonModel Year
All Harley-Davidson models with front-mount spin-on oil
filters (3/4”-16 thread)11-J77-34
MSRP $150.00
Applications
0712-0555
PART # 0712-0555
www.jagg.com
31
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Jagg Manual By-pass ValvePART # 4000
Product InformationThe Jagg Manual By-Pass Valve acts as a manual ther-mostat, allowing you to by-pass the oil cooling system for cold-weather riding or for faster warm-ups on cool days. Works with all oil coolers.* Durable anodized billet alumi-num construction. Compact in-line installation.Installation note: If the oil hoses between the oil cooler and the oil source are too short, the oil cooler by-pass valve may not fit in the oil lines. Jagg mini by-pass valves require at least 3 inches of straight hose.
Product Features• Manual by-pass control• CNC aluminum with knurled-grip knob
Harley-DavidsonModel Year
Universal Fitment 4000
MSRP $80.00
Applications
J4000B
PART # J4000B
www.jagg.com
34
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Thermostat Service Kit for Jagg Offset Oil Filter Adapter
PART # AK4700-T
Product InformationService kit to replace thermostatic by-pass element in Jagg 4700 Offset Oil Filter Adapter. Includes: New thermo-stat element assembly, AFM gasket, and large o-ring.
Product Features• Aluminum foam material (AFM) gasket provides leak-
free seal between adapter halves• Large rubber o-ring (square cross-section) seals rear
face of adapter
Harley-DavidsonModel
Services Jagg #4700 AK4700-T
MSRP $38.00
Applications
0713-0216
PART # 0713-0216
www.jagg.com
35
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Service Kit for Jagg Oil Filter Adapter
PART # SK4550
Product InformationService kit includes two replacement quad-seal O-rings for 4550 oil filter adapter.
Product Features• Quad-seal design offers excellent sealing characteri-
estics
Harley-DavidsonModel
Services Jagg #4550 SK4550
MSRP $10.50
Applications
0713-0217
PART # 0713-0217
www.jagg.com
36
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Service Kit for Jagg Manual By-pass Valve
PART # SK4000
Product InformationSK4000 service kit contains replacement o-rings, snap-ring retaining clip for manual by-pass knob, and a spare decal for the Jagg 4000 Manual By-pass Valve.
Product Features• Services Jagg Manual By-pass Valve
Harley-DavidsonModel
Services Jagg #4000 SK4000
MSRP $6.00
Applications
0713-0218
PART # 0713-0218
www.jagg.com
37
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Service Kit for Jagg Automatic By-pass Valve
PART # AK4050-T
Product InformationService kit to replace thermostatic element assembly in Jagg 4050 Automatic By-pass Valve.Assembly includes: thermostatic actuator, O-ring, sealing cap (anodized black to match 4050 by-pass valve), by-pass spring.
Product Features• Services Jagg Automatic By-pass Valve
Harley-DavidsonModel
Services Jagg #4050 AK4050-T
MSRP $30.00
Applications
0713-0219
PART # 0713-0219
www.jagg.com
38
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Service Kit for Jagg HyperFlow Engine Oil Filter
PART # SKJ77
Product InformationService kit includes two replacement quad-seal O-rings for 11-J77-34 Jagg HyperFlow Engine Oil Filters.
Product Features• Quad-seal design offers excellent sealing characteri-
estics
Harley-DavidsonModel
Services Jagg #11-J77-34 SKJ77
MSRP $10.50
Applications
0712-0556
PART # 0712-0556
www.jagg.com
39
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Anti-rotation Device for Jagg Offset Oil Filter Adapter
PART # 4600AR-C
Product InformationBolts to the face of Jagg #4600 & #4700 Offset Oil Filter Adapters to lock in place during future oil filter removals.
Product Features• Aluminum bracket, fits Jagg 4600 & 4700• Includes bolts
Harley-DavidsonModel
Services Jagg #4600, #4700 4600AR-C
MSRP $10.50
Applications
0713-0049
PART # 0713-0049
www.jagg.com
42
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Hose Upgrade KitsPART # 211-JLWN06-6
PART # 211-JSSN06-6
Product InformationSet your bike apart and give your Jagg oil cooler instal-lation a racy look with a set of performance braided oil hoses.Upgrade kit includes:• 6-foot length of your choice of either: bright stain-
less-steel braided hose, or black lightweight-fiber braided hose
• Two aluminum hose separators anozidzed in matching color
• Six aluminum hose finishers with integrated wormdrive clamps, anodized in matching color
Simply trim hose to required length, slip hose finishers over ends of hose, press hose onto nipple, and tighten hose clamp, to achieve an easy and beautiful upgrade.
Product Features• Hose features internal steel wire reinforcement and
braided outer jacket for stucture, toughness, and a racy look
• Hose finishers with integrated worm-drive hose clamps dress up hose ends and make for solid connections
• Hose separators manage hose lengths, keeping hose tight and tidy
211-JLWN06-6 211-JSSN06-6
Harley-DavidsonModel
Universal Fitment 211-JLWN06-6 211-JSSN06-6
MSRP $90.00
Applications
0711-02360711-0237
PART # 0711-0236
PART # 0711-0237
www.jagg.com
PART # 0711-0236 PART # 0711-0237
47
mfg’d & mkt’d by: sūsa, llc. | Centerburg, Ohio 43011 | +1 740 625 6228 | www.jagg.com
Back to Table of Contents
Miniature Thermal SwitchesPART # TS180, TS190, TS200
Product InformationSwitch on any 12V powered accessory at the prescribed temperature with easy plug-and-play thermal switches, the same used in all Jagg fan-assisted oil cooler kits.
Product Features• Thermal switch is naturally open (off) to switch on 12V
powered accessory at prescribed temperature• Available presets: 180/190/200 ºF• NPT1/8” threaded probe end plumbs into hot oil
source to access heat for activation• Simple brass prongs offer easy wire connections
TS180 / TS190 / TS200
UniversalModel
Universal Fitment TS180 TS190 TS200
MSRP $27.50
Applications
0713-02200713-02210713-0222
PART # 0713-0220, 0713-0221, 0713-0222
www.jagg.com
PART # 0713-0220, 0713-0221, 0713-0222