Janisol – thermally insulateddoors and windows
Steel and stainless steel
3
Steel systemsFor doors, windows and façades
We take our inspiration from nature. The known structural benefits of plant stems and long bones are applied to steel profiles. The veryslender profile dimensions mean more light and more scope for creativity. Architects, designers and users value the range of optionsavailable.
Steel is robust and can withstand mechanical damage. Jansen profile systems are therefore partic-ularly suitable for all buildings frequently used by the public: in commercial and industrial build-ings, in schools and hospitals, sports and leisure centres, in service centres and railway stations.Of the materials widely used in building construction, steel has the highest modulus of elasticity,at around 210 kN/mm2. The material benefits offer new and interesting options in structuraldimensioning, in fire applications, burglar-resistant constructions and in sound reduction. Thewide range of products also includes thermally insulated systems and stainless steel profiles.
Doors, windows and façades are created using Jansen tubular steel profile systems. Industrial pre-fabrication means simple, time-saving and cost-effective manufacture. Our comprehensiverange of profiles is complemented by a complete range of fittings and accessories, and by ophisticated fabrication tools. In addition to technical documentation and specialist «Janisoft»planning software, comprehensive consultancy and training is available for architects, designersand fabricators.
4
Janisol – Doors and windows
Janisol doors. Proven technology in perfect harmony. The flush-fitted door profile series is ideally suited to creating visually attractiveand structurally superior single and double-leaf doors. The use of high-quality insulating bars and mechanically undercut rolling means that a high degree of rigidity is achieved despite a minimal basic depth of 60 mm. Structural reinforcements can also be easily added. The glass fibre reinforced insulating bars are heat-resistant. As a result, no special precautions are required before welding the frames. The range of coloursavailable is virtually unlimited; powder coating, enamelling and wet coatingare all possible. The appearance is co-ordinated to match the other Jansendoor systems for fire and smoke protection. The sight lines are practicallyidentical. For the designer, this guarantees that sight lines are identical even where requirements are different.
Janisol anti-finger-trap doors. Safety and design areperfectly combined. The rounded half profiles minimise the risk of injury at the secondary closing edge. This then prevents crushing and shearing points as per DIN 18650. Withmaintenance-free, high-performance hinge bushes, Janisol anti-finger-trap doors are particularly suitable for buildings with highfrequency use by the public, e.g. shopping centres, schools orhospitals. Janisol anti-finger-trap doors meet the product standard EN 14351-1 for external doors and are CE certified. The cable link connector from the frame to the leaf is concealedin the top hinge bush. The anti-finger-trap doors are compatiblewith the Janisol and Jansen-Economy 60 range of profiles.Integrated door closers and automatic side-hung door drives can also be installed.
The Janisol systems have successfully passed the tests laid down in the product standard EN 14351-1. On this basis, manufacturers can label windows and external doors with the CE mark which is obligatory throughout the EU.
Proven technology in perfect harmony
Janisol windows. Modern technology with a classicaltouch. Highly stable welded frames allow construction of large windows with extremely slender frames. Arched windows,structural reinforcement and aesthetic adaptations of standardsteel profiles can also be produced cost-effectively in individualunits and small quantities. As a result, the Janisol system is very much in demand, not only for new buildings, but also for renovation projects.
Our range of products is completed by a system-compatible andeasy-to-install range of fittings (surface-mounted or concealed).There are side-hung, turn/tilt, bottom-hung and double-vent window options, as well as tilt/slide doors or purely fixed glazingand also combinations of these..
6
Profile rangeJanisol doors and windows
630.013630.013 Z
630.114630.114 Z
630.416630.416 Z
60
3
4
46
7
40 15 10
65
1.5
22.5 15 10 40
87.5
60
4
46
7
3
1.5
4
46
7
60
87.5
15 10 40 22.5 3
1.5
15
62.5
15 10
1.5
360
22.5
446
7
15
40
15 10
1.5
34
467
60
15
62.5
15 10
1.5
3
604
467
22.5
630.110630.110 Z
630.010630.010 Z
630.411630.411 Z
601.635601.635 Z
603.635603.635 Z
602.635602.635 Z
6057
70
22.52522.5
3
1.5
1.5
6057
70
22.52522.5
3
1.5
6057
47.5
22.525
3
601.685601.685 Z
602.685602.685 Z
1.5
6057
72.5
22.550
3
1.5
6057
95
22.55022.5
3
603.685603.685 Z
1.5
22.56057
95
22.5503
604.685604.685 Z
60543
3
50 22.5
72.5
1.5 1.5
70
6054
22.52522.5
33
605.635605.635 Z
601.699.6601.699.6 Z
357 60
20 25 22.5
67.5
1226
22
1.5
605.685605.685 Z
1.5
95
6054
22.55022.5
33
7
600.005600.005 Z
600.001600.001 Z
1.5
50
60573
561.5
60
50
1.5
25
60573
56
1.5
25
60
600.002600.002 Z
600.006600.006 Z
50
543
60
3
1.5
600.007 Z
600.010 Z
15
46 54
1040
50
44
3
60
3
1.5
602.636602.636 Z
630.900630.900 Z
1.5
2023
63
6412
.511
.5
10
20
3
1.5
6461
65
20 25 20
3
630.115630.115 Z
630.016630.016 Z
75 10 15
100
34
467
60
1.5
22.5 75 10 15
122.5
34
467
60
1.5
630.417630.417 Z
22.5 75 10 15
122.53
76046
4
1.5
9
35
25 23 20
68
34.
561
1.5108.
512
.53
68.5
630.901 Z
Z = made from hot-dip galvanised steel strips, lightly oiled (275 g/m² zinc coating on both sides = approx. 20 µm zinc inside and outside)
8
Janisol doorsExample of application
50
7.5
50
50
9
6
7.5
23
50
23
1014
.5
7.5
7.5
50
14.5
B-B
407.002630.416
450.007
450.007
402.120 Z
455.400
630.114
630.416
450.047
452.998
455.006
455.410
407.001
450.007
402.125 Z
630.900
601.685
550.651
630.114
630.114
630.416
601.685
450.007
402.120 Z
450.007
402.120 Z
455.006
60/20/2
452.989
452.990
D-D
7.5
7.5
5050
1010
50
7.5
7.5
50
81326
.5
5
95 50
3020
22.5
8
22.5
Alternative
555.373555.366-
605.685
402.120 Z
450.007
60/20/2
23
14.5
7.5
50
Detail A'
452.998455.400
601.685
402.125 Z455.410 630.900 Z
50
7.5 7.5
7
601.685
402.120 Z
450.007
6
9
50
10
50
7.5
50
10
7.5 7.5
50
50
10
50
7.5
A-A
550.229
630.013
455.006
630.416
455.006
450.007
402.120 Z
455.006
630.416
455.006
630.013
550.229
550.641
555.467
550.190
630.416555.466
630.114
402.120 Z
450.007
50
7.5
7.57.5
50
10
5050
10
7.5
50
7.5
50
10
C-C
550.229
630.416
Z
630.114
402.120 Z
450.007
630.114
550.229
630.013
550.190
630.114
555.467
630.416
402.120 Z
450.007
555.466
B
A
A'
B
A C
D
D
C
The practical examples are available as DXF files at www.jansen.com
10
Janisol windowsExample of application
402.125 Z
450.007
630.900
605.635
602.636
450.047
407.001
450.006
402.125 Z
450.007
455.410
455.400
452.998
630.900
602.685
450.007
402.125 Z
601.635
601.685
7.5
14.
5
23
22.5
25
7.5
23
14.5
50
7.5
7.5
25
14.5
14.5
2323
7.5
7.5
25
50
550.651
630.900
450.047
407.001
450.006
B - B
450.007
601.635
402.120 Z
601.685
630.900
605.635
450.047
407.001
450.006
402.125 Z
450.007
455.410
455.400
452.998
630.900
602.635
7.5
14.
5
23
22.5
25
7.5
7.5
23
14.5
25
25
7.5
50
D - D
455.
400
452.
998
601.
635
602.
635
601.
685
7.5 7.5
7.5
25
25
50
14.5 1
23
450
.007
455
.410
402
.130
Z
630.
900
407.001 4
11
B
B
A A C C
D
D
450
.007
455
.410
402
.125
Z
630.
900
601.
635
601.
685
450
.007
455
.410
402
.125
Z
630.
900
601.
635
601.
685
7.5 7.5 7.5 7.5
14.5 14.5
23 23 23 23
17
50 50
630.
901
Z
630.
900
407.001 407.001
452.
998
452.
998
2525
C - C
450
.007
402
.125
Z
601.
635
602.
635
601.
685
7.5 7.5 7.5
7.5 7.5
25
25 50
14.5
23 23 23
17
450
.007
455
.410
402
.130
Z
630.
900
630.
901
Z
630.
900
407.001
452.
998
A - A
The practical examples are available as DXF files at www.jansen.com
0 10 20 30 40 50
mm
72.547.5107.582.5
50
3522.5 25
601.
685
601.
635
Alternative: concealed window fitting
13
Janisol stainless steelDoors and Windows
Janisol stainless steel doors: for elegant durability. Thermallyinsulated stainless steel profiles are based on tried and tested Janisoltechnology. Profiles and sizes are the same as those in the Janisol range.This makes it possible for the designer to combine both types of steeleasily and for the fabricator to use identical accessories and fabricationtools. The range is complemented by a comprehensive range of stainlesssteel fittings. The profile surface is mill finish or can be polished onrequest.
Janisol stainless steel windows. Exceeds even the highest of standards. Whether you are considering using stainless steel forreasons of function or because of its appearance, Janisol windows meet both requirements. A comprehensive range of fittings with theappearance of stainless steel (galvanised and white-chromated) can be used for side-hung, turn/tilt and bottom-hung windows as well as tilt/slide doors.
An energy-saving investment for generations to come. These slimline, thermally insulated profiles in 1.4401 (AISI 316) stainless steel complement the tried and tested Janisol range.
This material is particularly suitable for use::
● In industrial areas● In coastal areas (salty air)● In areas with strict hygiene requirements● Near roads (withstands salt and grit)
15
Material: stainless steel 1.4401 (increasedcorrosion resistance) suitable forindustrial environments andcoastal areas
Surface: plain rolled, exposedfaces can be polished onrequest.
1.5
22.5
6057
95
22.550
3
603.685.01
1.5
95
6054
22.55022.5
33
605.685.01
60543
3
50 22.5
72.5
1.5
604.685.01
20
20
402.520
25
20
15
20
30
20
402.525402.515 402.530
35
20
402.535 400.859
1.5
2023
63
6412
.511
.5
10
20
3
630.900.01
75 10 15
100
34
467
60
1.5
630.016.01
9
35
25 23 20
68
34.
561
1.510
8.5
12.5
3
68.5
630.901.01
60
3
4
46
7
40 15 10
65
1.5
630.013.01
4
46
7
60
87.5
15 10 40 22.5 3
1.5
630.114.01
22.5 15 10 40
87.5
60
4
46
7
3
1.5
630.416.01
1.5
6057
72.5
22.550
3
601.685.01
1.5
6057
95
22.55022.5
3
602.685.01
1.5
6057
47.5
22.525
3
601.635.01
1.5
6057
70
22.52522.5
3
602.635.01 605.635.01
Profile rangeJanisol stainless steel
1.5
70
6054
22.52522.5
33
15
15
25
16
Janisol doors stainless steelExample of application
630.416.01
630.416.01
630.114.01
601.685.01
450.025
402.520
402.520
450.025
455.006
455.006
2525
7.5
50
10
50
7.5
50
10
50
7.5
7.5
50
400.859
B-B
630.114.01
630.114.01
630.416.01
601.685.01
450.025
402.520
450.025
402.520
455.006
60/20/2
452.989
452.990
E-E
7.5
7.5
5050
1010
50
7.5
7.5
50
81326
.5
5
17
0 10 20 30 40 50
mm
601.685.01 630.114.01 630.416.01
630.013.01630.416.01
402.520
450.025 555.572
455.006
550.190
450.025402.520
A-A
50
7.5 7.5
5050
10 10
50
7.5 7.5
50
AA
B
B
C
C
D
E
E
D
50
10
50 50
10
50 50
10
50
7.5 7.5 7.5 7.5
D-D
630.013.01 630.114.01 630.013.01630.114.01
450.025402.520 402.520
450.025
555.260
455.006 455.006
555.260
630.416.01
550.190
630.114.01
The practical examples are available as DXF files at www.jansen.com
450.025
402.520
35/20/1.5
605.685.01
822
.550
103
840
22.5
Alternative
555.366-555.373
18
550.684-687
22.5
7.5
7.5
25
14.5
23
7.5
7.5
23
5014
.523
14.5
5014
.523
B-B
455.400
452.998
450.049
602.685.01
630.900.01
402.525
455.410
450.025
601.685.01
450.049
400.859
450.025
605.635.01
630.900.01
402.525
455.410
450.025
450.025
400.859
452.998
7.57.550
25
14.5
25
237.5
2
402.520
450.025 4
455.410
630.900.01
602.
635.
01
452.998
455.400 4
400.859
601.
685.
01
601.
635.
01
72.547.5107.582.5
502522.5
35
402.530
450.025 455.410
630.900.01
400.859
601.
685.
01
601.
635.
01
7022.5
105
2522.535
402.530
450.025 455.410
630.900.01
400.859
602.
635.
01
402.525
450.025
Alternative: concealed window fitting
Janisol windows stainless steelExample of application
19
The practical examples are available as DXF files at www.jansen.com
0 10 20 30 40 50
mm
50
23
2514
.5
7.5
Alternative
601.635.01
601.685.01
630.900.01
455.410450.049
450.025
402.530 450.025
400.859
B
B
A A C C
D
D
23
50
25 14.5
7.57.5
1723 23
7.523
7.5
2550
14.5
C-C
630.900.01455.410
402.530
450.025
402.530
450.025630.901.01 455.410630.900.01
455.400452.998
400.859400.859
601.
635.
01
601.
685.
01
601.
635.
01
601.
685.
01
25
237.5
2317
7.523
7.5
14.5 7.5
50
25
7.5
A-A
402.525
450.025
602.
635.
01
402.525
450.025630.901.01
4455.400
452.9984 400.859
630.900.01
455.410
6
402.520
450.025
601.
685.
01
601.
635.
01
21
Janisol Primo windowsFocus on thermal insulation
High quality insulation in a minimum of space. This highly thermally insulated profile system with a construction height of only 60 mm (64 mm vent) allows efficient fabrication of fixed glazing andwindows (side-hung, turn/tilt and bottom-hung) as well as tilt/slidewindow doors.All window vents have a centre gasket and a rebate gasket on the room side. We stock a range of system-tested fittings with one-handoperation and multi-point locking for all possible window opening types. Identical profile cross-sections greatly simplify the fabrication of Janisol Primo, and also allow them to be combined with tried andtested Janisol profiles.
Energy-saving measures and thermal insulation are increasing in significance as buildings begin to be viewed as a whole. For both economic and ecological reasons, the window should be accorded greater importance.
The heat transfer coefficient value Uf has been calculated in accordance with prEN ISO 10077-2:1998 «Calculation of the heat transfer coefficient values Uf – numerical method for frames» and is 1.4 to 2.5 W/(m2K) for all combinations of the Janisol Primo system (ift-test report 432 256 35/1 dated 21.7.2003).
23
1.5
25 22.5
70
36057
22.5
605.635.6 Z 630.900 Z 600.002.6 Z
1.5
2023
63
6412
.511
.5
10
20
3
9
35
25 23 20
68
34.
561
1.510
8.5
12.5
3
68.5
630.901 Z 601.699.6 Z 602.634.6 Z
357 60
20 25 22.5
67.5
1226
22
1.5
25
56 60
1.5
1.5
1.5
50 22.5
95
36057
1.5
22.5
603.685.6 Z
50 22.5
95
36057
1.5
22.5
605.685.6 Z
Z = made from hot-dip galvanised steel strips, lightly oiled (275 g/m² zinc coating on both sides = approx. 20 µm zinc inside and outside)
Profile rangeJanisol Primo windows
25 22.547.5
36057
1.5
601.635.6 Z
50 22.5
72.5
36057
1.5
601.685.6 Z
25 22.5
70
36057
1.5
22.5
602.635.6 Z
25 22.5
70
36057
1.5
22.5
603.635.6 Z
50 22.5
95
36057
1.5
22.5
602.685.6 Z
22.5 15 22.5
60
1.5
357 60
601.634.6 Z
15 22.5
37.5
357 60
1.5
24
Janisol Primo windowsExample of application
450.006
407.001
450.047
601.685.6 Z
601.635.6 Z
550.651
630.900 Z
450.007
402.125 Z
450.006
407.001
450.047
602.685.6 Z
455.410
630.900 Z
450.007
402.125 Z
630.900 Z
605.635.6 Z
7.5
22.5
2523
14.5
50
14.5
23
7.5
14.5
23
7.5
7.5
23
14.5
50
B-B
601.685.6 Z
601.635.6 Z
450.007
402.120 Z
630.900 Z
450.007
402.125 Z
455.410
630.900 Z
605.635.6 Z
450.006
407.001
450.047
602.635.6 Z
7.5
7.5
25
22.5
2523
23
14.5
14.5
7.5
7.5
2550
D-D
550.651
601.
685.
6 Z
601.
635.
6 Z
450.
007
402.
120
Z
630.
900
Z
450.
007
402.
125
Z
455.
410
407.001
602.
635.
6 Z
7.5 7
25 23
7.5 14.57.5
50 25
25
601.
685.
6 Z
601.
635.
6 Z
455.
410
630.
900
Z
402.
125
Z
450.
007
455.
400
601.
685.
6 Z
601.
635.
6 Z
455.
410
630.
900
Z
455.
400
407.001 407.001
7.5 7.5
23
14.5
50
7.5
23
14.5
50
17
2323
7.5
2525
C-C
630.
901
Z
630.
901
Z
402.
125
Z
450.
007
450.
007
630.
900
Z
450.
007
402.
125
Z
455.
410
601.
685.
6 Z
601.
635.
6 Z
402.
120
Z
602.
635.
6 Z407.0014
7.5 7.5 7.5
23 23 23 25
7.57.514.517
25 50
A-A
B
A A C C
D
B D
0 10 20 30 40 50
mm
The practical examples are available as DXF files at www.jansen.com
62.509
37.5
15
35
22.5
Alternative: concealed window fitting
26
Janisol HIHighly insulated solutions for minimal thermal flow
Steel windows with optimum thermal break. Modern windows must meet a number of different demands and perform a variety of functions. They must save energy, be airtight and watertight, easy to use, meet structural requirements, but also be highly attractive. Janisol HIsteel windows and fixed glazing feature isolators made from glass fibre-reinforced polyurethane and boast optimum thermal and structural properties, achieving UW values to 0.69 W/m2K for fixed glazing and UW values to 0.8 W/m2K for windows. With a basic depth of 90 mm, vent dimensions of up to 2800 mm and a vent weight of 180 kg are possible. Different infill unit thicknesses up to 67 mm can be used with triple glazing, but also with burglar-resistant or bullet-resistant glass. Due to the slimline external face width and the wide variety of coatingoptions, Janisol HI steel windows can meet high thermal insulation requirements in terms of both function and design.
Highly insulated steel doors reduce thermal flow to a minimum. In busy public buildings in particular, the requirements for thermal insulation and security are even greater. Janisol HI steel doors conveniently combine mechanical stability with high thermal insulation properties in one single steel profile system. Thanks to isolators made from glass fibre-reinforced polyurethane, Janisol HI achieves UD values to 1.0 W/m2K. With a basic depth of 80 mm, infill unit thicknesses of up to 57 mm can be used with triple glazing and burglar-resistant or bullet-resistant glass. A comprehensive and co-ordinated range of fittings and accessories, as well as a range of thresholds, which can be selected to suit the situation, provide the perfect solution for all possible applications. Thanks to the high-tech isolators, the lock is easy to fix in place and extremely efficient fabrication is guaranteed.
27
38 12 15
65
37
6010
80
1.5
38 12 15
85
20
37
6010
80
1.5
38 12 15
85
37
6010
80
20
1.5
20 50 20
90
33
74 80
1.5
30 20
50
377 80
1.5
50 20
70
377 80
1.5
30 20
70
377 80
20
1.5
50 20
90
377 80
20
1.5
30 20
70
377 80
20
1.5
20 50 20
90
377 80
1.5
30 20
703
77 80
20
1.5
50 20
90
377 80
20
1.5
20 15 10 20
65
4.5
60.5
12.5
12.5
90
3
1.5 109.6
12.4
20 30 20
387 90
1.5
70
681.630 Z 681.650 Z 682.630 Z 682.650 Z
683.630 Z 683.650 Z
680.900 Z 680.901 Z
685.630 Z 685.650 Z
Janisol HI profilesWindows, doors and fixed glazing
Fixed glazing
Windows
Doors
28
681.
630
Z
682.
630
Z
680.
900
Z
680.
900
Z
681.
630
Z
402.
120
402.
130
450.
007
450.
007
455.
025
455.
025
455.
025
450.
076
455.
452
455.
025
455.
450
450.
076
455.
025
455.
452
680.
900
Z
450.
076
680.
901
Z
681.
650
Z
681.
650
Z
772525
15BRFB
1530
7730 30
77
16525 30
1550 50
B-B
681.630 Z
682.630 Z
685.630 Z
450.007
455.464402.120
455.464
450.076
455.025
455.025
681.650 Z
77
730
77
3030
2050
C-C
681.630 Z
682.630 Z
680.900 Z
685.630 Z
680.900 Z
455.452
450.007
455.450
450.007
402.130
455.464
455.450
450.076
455.464
402.120
450.076
450.078
455.025
455.025
681.650 Z
77
2525
1515
307
730
3020
8
50
D-D
A A
C
C
B
B
Janisol HI windowsExample of highly thermally insulated windows
29
680.416 Z 680.114 Z 680.416 Z 680.013 Z 680.416 Z 680.013 Z
750
1050
750
1050
750
1050
7
A-A
680.416 Z
680.416 Z
600.012
681.650 Z
680.114 Z
750
1050
725
20
7
507
750
B-B
A
B
B
A
A'
Janisol HI doorsExample of highly thermally insulated doors
30
25
10 15
60
357
40
10 1515
603
57
40
10 1515
603
57
40
10 1515
603
543
601.610601.610 Z
602.610602.610 Z
603.610603.610 Z
605.610605.610 Z
Janisol ArteThe right system for every requirement
This profile series has been specially developed for the renovation of industrial and loft glazing, as well as the windows of listed buildings. Typical, slender, Bauhaus-style glazing can be almost perfectly restored using extremely slimline, thermally broken profiles.
Janisol Arte is therefore the first choice when redesigning former factory buildings. The profiles feature impressive face widths of just 25 or 40 mm. The selected materials – steel and glass fibre-reinforced high performance plastics – guarantee minimal heat loss and maximum stability. Currently standard insulating units can be easily built into the profiles with a basic depth of 60 mm. The conventional opening types for buildings from the fifties and sixties, such as inward or outward-opening side-hung, double-vent, bottom-hung, top-hung or projected top-hung windows, can be constructed using just four types of profile.
Compared with newbuilds, renovation projects are becomingincreasingly important. The conversion of industrial buildings and conservation of historical buildings in particular are proving to be the engines of economic growth in the construction and property markets.Steel plays a central role in this owing to its specific strengths in terms of material properties and design options.
The modular Jansen system offers architects and specifiers comprehensivesolutions for the authentic renovation, preservation or flexible conversionof old buildings. Jansen steel profiles can be used to authentically restore a wide variety of historical façade, window and door constructions –taking into account all the structural and safety requirements of the lawand from the client.
31
C
A A
B B
C
D
D
4040 404 4 4 4
20404
20 4044 4
60 60
5605.610 450.026
405.021
555.485
605.610450.026
405.021
555.485
455.044
555.484 603.610 405.021
557.082
602.610
A-A
4040
404
44
20
55
404
44
4060
2060
605.610555.485
450.026
405.021
605.610555.485
450.026
405.021
407.309/555.486
450.026
405.021
602.610
603.610
407.009
450.047452.994
407.309/555.486455.044
C-C
4015 10 15
40 4040
4
40204 4 4 4
2044 4
55605.610 450.026
405.021
555.485
603.610455.044
405.021 602.610 605.610450.026
405.021
555.485
407.309/555.486B-B
4020
6040
2060
404
44
44
44
5
4040
405.021
605.610
450.026
555.485
405.021
452.995
455.044
602.610
405.021
603.610455.044 407.309/555.486
450.026
405.021
605.610
450.026
555.485
557.081
407.009
D-D
Janisol lift-and-slide doorsA wonderful outlook for private homes
Janisol lift-and-slide doors are redefining living space. The robust,highly thermally insulated steel profiles provide narrow frames together with a high level of comfort. The chosen basic depth allows for the installation of triple insulating glass of up to 57 mm. This means Uw values to 0.9 W/m2K can be achieved. Despite a comparatively small basic depth of 80 mm and profile face widths of just 85 mm, door leaf sizes up to 4270 mm wide and 3210 mm high can be installed. In the standard design, weights of up to 400 kg are possible; as a special design with special running gear, weights of up to 600 kg are also possible. Janisol lift-and-slide doors are also distinguished by their straightforward fabrication and installation. The frame and door leaf profiles can be inserted continuously. The bottom threshold profile made of high quality glass fibre-reinforced plastic provides an easy-access threshold construction whilst ensuring optimum thermal insulation.
Janisol folding wallFlexible room design
Steel folding wall – thermally broken. The Janisol folding wall isbased on the Janisol thermally insulated system. Flexible in use, the Janisol folding wall system can be used as a room divider as well as for outside areas, and can be inward or outward-opening. A compatible range of fittings and accessories ensures perfectly smooth and quiet operation. A range of designs is available for the threshold. Depending on the size and loading, profiles with a face width of 25 mm or 50 mm can be used. The load-bearing capacity of the top running gear is up to 200 kg, which permits leaf weights of up to 100 kg.
34
Glazing beads
Steel glazing beads made from hot-dip galvanized steel strip (length 6 m)
402.112 Z
1520
402.115 Z
20
20
402.120 Z
25
20
402.125 Z
30
20
402.130 Z
12
20
62.507 GV+GC 62.508 GV+GC 62.509 GV+GC
Steel angled glazing beads (length approx. 6 m)
Aluminium glazing beads (length 6 m)
405.103 405.115 405.120
20
3
20
15
20
20
405.125
20
25
Aluminium glazing beads (length 6 m)
404.109
12
20
404.112
15
20
404.115
20 2
0
404.120
25
20
404.125 404.130
35
20
404.135
30
20 20
9
35
20
402.135 Z
5
5
3
3
1520
20
5
25520
3
203
3
5
203
530
25
Steel and aluminium
406.903
15
614 20
5
406.901
15 5
205
406.905 406.907
20
15
20
15
406.909
515 20
5
20
406.996
515
520
35
System versatilityThe right system for every application
Windo
ws
Doo
rs
Façade
s
Fixed glazing
Partition walls
Con
servatories
Fire protection
Thermal insulation
Safety and
security
◆ ◆ ◆◆ ◆ ◆
◆◆ ◆
◆
◆
◆ ◆
◆ ◆
◆ ◆◆
◆ ◆◆◆
◆
◆ ◆ ◆ ◆ ◆
◆ ◆ ◆ ◆
◆ ◆ ◆ ◆ ◆
◆ ◆◆
◆ ◆
◆ ◆ ◆ ◆ ◆
◆◆
◆ ◆ ◆
Systems Systems specifications
Doors and windows CE tested, anti-finger-trap door, folding wall, burglar resistance WK3 and bullet resistance, steel and stainless steel
Windows CE tested, burglar resistance WK3 and bullet resistance
Windows CE tested, inward and outward-opening windows, very slim face widths
Doors and fixed glazing, fire resistance tested to EI30, smoke protection,burglar resistance, steel and stainless steel
Doors and fixed glazing, fire resistance tested to EI60 and EI90, smoke protection
Mullion-transom construction for vertical glazing, dry glazing, CE tested, burglar resistance WK3 and bullet resistance
Mullion-transom construction for vertical and sloped glazing, dry glazing, CE tested, burglar resistance WK3 and bullet resistance
Mullion-transom construction for vertical and sloped glazing, tested for fire resistance to E90/EI90
Structural glazing façade based on the tried-and-tested VISS system
Construction for steel and stainless steel façades for mounting on any support
Doors and windows CE tested, anti-finger-trap door, fire resistance tested to E30, smoke resistance, bullet resistance, steel and stainless steel
Doors CE tested, anti-finger-trap door, fire resistance tested to E30, smoke resistance, burglar resistance and bullet resistance
Hollow steel profile series for swing doors, pressed steel doors, horizontal pivot windows and pilaster profiles
Hollow steel profile series for automatic or manual folding and sliding doors, CE tested
JanisolBasic depth of doors 60 mmBasic depth of windows 60/64 mm
Janisol PrimoBasic depth 60/64 mm
Janisol ArteBasic depth 60 mm
Janisol 2Basic depth 60 mm
Janisol C4Basic depth 70 mm
VISS TVFace width 50/60 mm
VISS TVSFace width 50/60 mm
VISS FireFace width 50 mm
VISS SGFace width 50/60 mm
VISS Basic / VISS Ixtra
Jansen-Economy 50Basic depth of doors 50 mmBasic depth of windows50/58.5 mm
Jansen-Economy 60Basic depth 60 mm
Standard profilesBasic depth 40, 50, 60, 80 mm
Folding and sliding doorsBasic depth 50, 60, 80 mm
◆
◆ ◆◆
◆ ◆◆◆