Date post: | 03-Jan-2016 |
Category: |
Documents |
Upload: | avice-anthony |
View: | 216 times |
Download: | 0 times |
3
Agenda
• Welcome & Introductions• Aviation 2013 minutes approval• Future Meeting Plans • Organization Chart• Membership• Treasurer’s Report• Paper Sessions• Liaison Reports• Publications• DETC Design Guide• Awards• Design Engineering Award Recipient • Subcommittee Reports
4
DETC Minutes Aviation 2013
• New process for approving minutes Draft minutes published and placed on website within 30 days Members review and provide corrections/updates Reminder and draft minutes distributed with next meeting agenda and
notice Review and recommend for approval or update/corrections at next
meeting
• Aviation minutes Draft minutes sent out
• Recommend approval
DETC Meeting Schedule
2014 1st MeetingAIAA Science and Technology Forum
and Expostion (SciTech) 2014Location: National Harbor, MDDate: 13 - 17 January 2014
2014 2nd MeetingAIAA Aviation and Aeronautics Forum
and Exposition 2014Location: Atlanta, GADate: 16 - 20 June 2014
2015 1st MeetingAIAA Science and Technology Forum and Expostion (SciTech) 2015Location: Orlando, FLDate: 5 - 9 January 2015
2015 2nd MeetingAIAA Aviation and Aeronautics Forum and Exposition 2015Location: Dallas, TXDate: 22 - 26 June 2015
7
Organization
• DETC is part of the Aerospace Design & Structures Group Director – Kathleen Atkins
– Two deputy directors» Carlos Cesnik – Design» Achille Messac - Structures
• The Aerospace Design & Structures Group is part of the Technical Activities Committee (TAC) VP - Basil Hassan Deputy- Thomas Duerr
DETC Organization Chart
Design Engineering
Technical CommitteeSid Rowe – Chair
Chuck Hall – Vice-Chair
Bob Dauwalter – Treasurer
Jerry Brown – Chair Emeritus
Jon Cutshall - Webmaster
Publications
Russ Althof
Awards
Jerry Brown
Conference Planning???? – Aviation
Clark Briggs – SDM LRP
Russ Althof – Sci Tech
Design Guide S/CRuss Althof – Chair
Garfield Creary – V/C
Design Process S/CDave Staggers – Chair
TBD – V/C
Bob Dauwalter
Vladimir Balabanov
Garfield Creary
Jon Cutshall
Clark Briggs John DiNonno
Jerry Brown Dave Staggers
Jian Wang Clif Davies
Nans Kunz Chuck Hall
Steering
Committee
New Members:
Frank Dervault
Membership
Jim Faoro
Education S/CJon Cutshall – Chair
Jian Wang – V/C
Johann Schrell
Chuck Hall
Gary Honea Franz-Josef Kahlen
Lisa Saam Clark Briggs
Computer Aided Enterprise
Systems S/CMike Bailey- Chair
TBD- Vice-chair
Clark Briggs Garth Mattson
Phillip Pacini
9
Membership
• Currently 25 members on the DETC roster (effective last July 12th) 2 International member (Jian Wang, Franz-Joseph Kahlen)
• Nominations open until November 1st
• Farooq Akram – Potential International Member
TC Funds
• Request for expense reimbursement Russ Althof – Purchase of Estes rockets for Design,
Build, and Fly - $167.37 Bob Dauwalter - Purchase of design guides for SDM
best paper presentations- $225.74 Russ Althof - Purchase of Five (5) Additional DETC
T-shirts - $136.27
12
13
Paper Sessions
• Sci Tech 2014 – Three sessions completed.• Aviation 2014 – Six abstracts reviewed. One will
be rejected. Three accepted. Two in work.
16
TAC Meeting Report
• Concerns from SDM people with concessions made to combine into the SciTech Forum. Does DETC see pros/cons of this?
• No TAC funds for this fiscal year.• Annual report due 1/31.• Membership upgrades: Associate Fellows due Apr 15,
Fellows due Jun 15.• Crichlow prize nomination due Mar 15.
18
CADWG Report
1. Presentation by PointWise 'reliable CFD meshing'. Only meshing. Work with lots of native CAD. Block structure grids.
Unstructured grids. Overset meshes. Layered brick meshes.
2. Presentation Phoenix Integration, Andy Ko. Model based systems engineering.
There is a gap between systems engineering and engineering analysis. Phoenix modelcenter is graphical/diagrammatical programming for otherwise unconnected analysis tools. Solving can be network distributed and non collocated.
MBSE Pak ties MBSE architecture models with analytical (physics based) models. Represents an engineering analysis as a SysML Parametrics constraint block. When parametric block is run, modelcenter captures the inputs, runs the analysis tools and return results as outputs of the block.
Now SysML requirements can be tied to verification analyses. Demo showed MagicDraw (sysml authoring tool) running with ModelCenter.
19
Design, Build, Fly
• 17th year of the competition• 2013 Fly-off held in Tucson, AZ and hosted by
Raytheon Missile Systems in April• 90 entries, 81 report submittals (eligible for fly-
off), 60 teams in attendance, 55 with a successful flight attempt
20
DETC Newsletter
• Fall and Spring publications Fall (inputs due Sept 1?)
– After 3rd meeting in time for ASM distribution– End of year “hi-lites”
Spring (inputs due by Apr 1)– Prior to SDM– Emphasize paper sessions, DBF contest and for this
year’s spring edition, the Design Award winner
• Need inputs from S/C’s, SDM, DBF, Membership, etc
21
DETC Design Guide 6th Edition
Here are the latest sales figures for the 6th edition of the Design Guide.•iOS App - (April 2013 - Nov. 2013)
52 units sold (25 at Aviation 2013) 1796 student member downloads (provided as a
benefit of student membership)
•Print Book (Oct. 2012 - 18 December 2013) 162 units sold
22
Awards
• Design Engineering Award Nominations Will be awarded at SciTech to Michael Benjamin/GE We have a goal to get 6 quality nominations for the next
award Additional comments:
– The award recipient cannot have been a member of the TC for at least two years
– We need to NOT rely on AIAA only to advertise and solicit nominations for this award
– Create and post flyers at all conferences – Send solicitation letter to engineering management of major
aerospace firms for nominations
24
Subcommittee Reports
• Design Guide• Design Process• Education• Computer Aided Engineering Systems