6
ASEAN’s #1 International Exhibition on Assembly, Measurement and Testing Technologies for Electronics Manufacturing Japan Pavilion
ASEAN’s #1 International Exhibition on Assembly, Measurement and Testing Technologies for Electronics Manufacturing
Japan Pavilion
19 22 June 2014BITEC, Bangkok
34 ASEAN’s #1 International Exhibition on Assembly, Measurement and Testing Technologies for Electronics Manufacturing
Japa
n Pav
ilion
COSEL ASIA LTD.Room 601, 9 Chong Yip Street, Kwun Tong, Kowloon, Hong Kong
T: +852 2305 2712F: +852 2305 3006E: [email protected]: www.coselasia.com
Cosel is a world leading SMPS manufacturer headquartered in Japan. With Cosel’s commitment to quality, reliability, and customer service, backed by a very low field failure rate, Cosel has been the dependable choice for over 40 years. When quality is a must, reliability is critical and technical service is crucial, Cosel stands alone. Cosel offers an extensive product array in the AC/DC switching power, DC/DC converters and EMI filters. AC/DC products range from 5 to 10,000 watts with output voltages ranging from 3 to 48 volts. The DC/DC products range from 1.5 to 700 watts with output voltages ranging from 1.2 to 48 volts. We also offer extensive range of EMI filters of single phase or three phase, from 3A up to 300A.
Product and Service: Cosel is specialize in making AC/DC switching mode power supply, DC/DC converters and EMI filters.
Agents Name FURUTAKA–VIV (THAILAND) CO., LTD.22 Sukhumvit 42 Road, Prakanong, Klongtoey, Bangkok 10110 ThailandT: +66 2712 1032, +66 2712 1038F: +66 2712 1043E: [email protected]: www.furutaka-viv.com
FUJI MACHINE ASIA PTE LTD.51, Ubi Avenue 1, #01-24, Paya Ubi Industrial Park, 408933 Singapore
T: +65 6746 4966F: +65 6841 2326E: [email protected] W: www.fma-smt.com
FURUTAKA-VIV (THAILAND) CO., LTD22, Soi Sukhumvit 42, Sukhumvit Road, Phrakanong, Klongtoey, Bangkok 10110 Thailand.
T: +66 2712 1032, +66 2712 1038 F: +66 2712 1043W: www.furutaka-viv.com
Established : August 3, 2006Capital : THB 10,000,000.00Shareholder :Furutaka Electronics Co., Ltd. 49VIV Interchem Co., Ltd. 51
FURUTAKA-VIV
Furutaka Electronics is a long-established trading company, specializing in electronic components, and we have built up customer trust and an extensive track record, one step at a time.
Needs for electronic components go far beyond Japan, and inquiries from overseas manufacturing companies have been increased. To respond to rapid product cycles, Furutaka Electronics has established overseas branches as management centers for eash base, and through timely communication with our bases in Hong Kong, Shanghai, Singapore, Bangkok, Shenzhen and Hanoi, we provide electronic component solutions with greater speed, accuracy and customer satisfaction.
Fuji Machine Asia Pte Ltd.Established since 2001 (Formerly Fuji Machine Singapore Pte Ltd)..Located in Singapore with branches in Johor, Penang (Malaysia), Thailand, Ho Chi Minh, Hanoi (Vietnam) and supporting Batam, Jakarta (Indonesia),
Product and Service: Fuji mounters, Koh Young Inspection System, Finetech reworks systems and Europlasma plasma system.
19 22 June 2014BITEC, Bangkok
35www.nepconthailand.com
Japa
n Pav
ilion
JFE SHOJI ELECTRONICS (THAILAND) LIMITED21th Floor, Chamnan Phenjati Business Center Building, 65/173-174 Rama 9 Road, Huaykwang Sub-District, Huaykwang District, Bangkok 10310 Thailand
T: +66 2247 9949F: +66 2247 9950E: [email protected]: www.jfe-shoji-ele.co.th
JFE Shoji Electronics Corporation was established in January 2011 with the merger between Kawasho Semiconductor Corporation and Kawasho Electronics Corporation. This was the brand-new start of our company destined to play an important role as part of the JFE Shoji Group.
In the Surface Mount Technology field, in order to cope with high efficiency, downsizing, and weight-saving of electronic products, we are globally dealing with advanced SMT related equipment under the Key-words of “High speed, High density and High quality.” We provide our customers with so-called “One stop SMT solution” which is a comprehensive production system comprised of SPI, SMT, Reflow system and AOI as well as maintenance services that can solve the problems of our customers.
Product and Service: We provide the best coordination for facilities necessary to the mounting floor to match our customers’ products and specification requirements. With the motto of high productivity, high quality and stage switching properties as a total line, we provide this service as a one-stop solution. We also have a lineup of many peripheral devices.
JUKI SMT ASIA CO., LTD.700/166 Moo 1 Amata Nakorn Industrial Estate, Baankao, Phanthong District, Chonburi 20160 Thailand
T: +66 3846 5306-9F: +66 3846 5305E: [email protected] W: www.juki.co.jp
JUKI SMT ASIA Thailand office is sales & service HQ of S.E.A and branches in KL (Malaysia), Hanoi (Vietnam), Ho Chi Mih (Vietnam), Jakarta (Indonesia) also.
Product and Service: Surface Mount Technology system, Products and equipment
NIHON SUPERIOR (THAILAND) CO., LTD.13th Floor LPN Tower, Nanglinchee Road, Chong Non See, Yannawa, Bangkok 10120 Thailand
T: +66 2285 4471, +66 2285 4386F: +66 2285 4358E: [email protected] W: www.nihonsuperior.co.jp
Date Established : Oct 4.2000 Managing director : Mr.Tohru Shiratani Line of Business : Distribution of metal jointing materials for electronics (solder, flux, brazing alloys, etc.)Employee : 16 Persons (Japanese 2 persons)Certified to : ISO 9001 and ISO14001
Product and Service: Product : Lead Free Solder alloy. SN100C (Sn-Cu-Ni+Ge) High Reliability Lead Free SolderFeature : Less Shrinkage, Reduced Copper Erosion, Inhibition of IMC Growth, Excellent Resistance to Thermal Fatigue.
For Wave SolderingSolder Bar SN100C and SN100CESoldering Flux NS-F850 and NS-F901 (Halogen Free)
19 22 June 2014BITEC, Bangkok
36 ASEAN’s #1 International Exhibition on Assembly, Measurement and Testing Technologies for Electronics Manufacturing
Japa
n Pav
ilion
For Hot Air Leveling (HASL) Solder Bar SN100CLN3.
For Dipping SolderSolder Bar SN100C3 and SN100C4Soldering Flux NS-3
For SMTSolder Paste SN100C P506 D4 and SN100C P602 D4 (Halogen Free)Solder Paste SN97C P506 D4 (SAC305)
For Hand SolderingFlux Core Wire SN100C (031) F3% andSN100C (044) F3.5% (Halogen Free)
Service : Training IPC 610-A ,Wave Soldering, Manual Soldering
OSADA CO., LTD.825 Kamiongata-machi, Hachioji City, Japan
T: +814 2651 1411F: +814 2651 7581E: [email protected]: www.osada-terminal.co.jp
OSADA was founded in 1983 in Tokyo, Japan.
Product and Service: Specializes in terminal block manufacturing and general precision sheet metal processing. OSADA has a wide assortment of products and a flexible design system for custom made components. We have been selling a lot of types of terminal block of the various standards and terminal block of the high-voltage. It is popular with Japanese brands in power conditioner and solar panels. Competitive costs through automation of our factory is an advantage of us.
GSK ELECTRONICS THAILAND OFFICEUnit 1208 Rasa Tower I, 12th Floor, 555 Phaholyothin Road, Chatuchak, Bangkok 10900 ThailandT: +66 2937 0333F: +66 2937 0334E: [email protected]: http://gsk.com.sg/
NORITAKE CO., LIMITED.670-5 Uchimi, Taiki-Cho, Watarai-Gun, Mie-Pref. 519-2736 Japan
T: +815 9883 2375F: +815 9883 2214E: [email protected]: www.noritake-itron.jp
There are reasons why VFD continues to be selected. VFD provides the clear and distinct, high-visibility image renowned of this self-emitting display technology. It was pioneered in 1966 by Dr Tadashi Nakamura of Noritake Itron (formerly Ise Electronics), then developed and brought to production.
Product and Service: This innovative display captured the world’s attention, and was awarded the Science and Technology Agency Director-General’s Award, and the Society for Information Display (SID) Karl Ferdinand Braun Prize, among others. VFD use exploded with the rise of electronic calculators, POS devices and game machines. Since then, we have developed easy-to-use VFD modules. The outstanding performance characteristics of VFD continue to be recognized by manufacturers world-wide for home appliances, vending machines, measuring instrument, medical equipment, and industrial equipment.
Agents NameFURUTAKA – VIV (THAILAND) CO., LTD.22 Sukhumvit 42 Road, Prakanong, Klongtoey, Bangkok 10110 ThailandT: +66 2712 1032, +66 2712 1038F: +66 2712 1043E: [email protected] W: www.furutaka-viv.com
SATO PARTS CO., LTD.3-3-3, Ebisu, Shibuya, Tokyo 150-0013 Japan
T: +813 3441 7215F: +813 3442 4173E: [email protected] W: www.satoparts.co.jp
“SCREWLESS TERMINAL BLOCKS”It is a wire connector which can connect wire easily.No screw! No crimping! No soldering!No need for special tools!Simple 3 steps to connect! 1. PUSH button 2. INSERT wire into hole 3. PULL back button
19 22 June 2014BITEC, Bangkok
37www.nepconthailand.com
Japa
n Pav
ilion
We also specialize in…• FUSE HOLDER• INDICATOR LAMP• CONTROL KNOB• MECHANICAL SWITCH
and more.
CONTACT US :[Japan]SATO PARTS CO., LTD.E: [email protected]
[Thailand] Furutaka-VIV(Thailand)Co., Ltd.E: [email protected]
SHINDENKIZAI CO., LTD.2-2-13 Sotokanda, Chiyoda-ku, Tokyo, 101-0021 Japan
T: +813 3253 7439F: +813 3253 5965E: [email protected]: www.mac8japan.com
MAC8 (MAC EIGHT) is a leading company for PCB hardware and accessories in Japan. Main products are Spacers, Connectors, Test Pins, Jumpers, Socket Pins, and are applied by many industry customers. MAC8 established in 1972, and their motto “Creating special products that can’t be made by other companies” is still unchanged. MAC8 locate in only Japan, and all process supported in Japan. So MAC8 is proud of “Made in Japan” by quality and specification, total customer service. MAC8 products are used in various stages, from trial production to mass production stage. 7,000 line-up with 20 new items every year is now expanding to worldwide market.
Product and Service: Spacers, Connectors, Test Pins, Jumpers, Socket Pins
Agents NameFURUTAKA–VIV (THAILAND) CO., LTD.22 Sukhumvit 42 Road, Prakanong, Klongtoey, Bangkok 10110 ThailandT: +66 2712 1032, +66 2712 1038F: +66 2712 1043E: [email protected] [email protected]: www.furutaka-viv.com
SEMITEC HK CO., LTD.Units 211&212,2/F.,Koon Wahi Building,No.2 Yuen Shun Circuit, Shatin,Hong Kong
T: +852 2369 6773F: +852 2739 2396E: [email protected] W: www.semitec.com.hk
Semitec Corporation is the world leading company of the Thermistor supported by the fine Ceramic technology. Thermistor have contributed to great advances in the recent electronic gear by controlling. Inside temperature of downsized PCs and OA equipment, etc.
Product and Service:Providing standard items of NTC thermistor and customer made for products if customer need special require.
Distributors FURUTAKA – VIV (THAILAND) CO., LTD.22 Sukumvit 42 Road, Prakanong, Klongtoey, Bangkok 10110 ThailandT: +66 2712 1032, +66 2712 1038F: +66 2712 1043E: [email protected] W: www.furutaka-viv.com
19 22 June 2014BITEC, Bangkok
38 ASEAN’s #1 International Exhibition on Assembly, Measurement and Testing Technologies for Electronics Manufacturing
Japa
n Pav
ilion
ARTRAY CO., LTD.1-17-5 Kouenjikita, Suginami-ku, Tokyo, Japan
T: +813 3389 5488F: +813 3389 5486E: [email protected]: www.artray.us
Artray was founded in 1995. Since its establishment, Artray has been specializing in manufacturing image processing devices on different interfaces. We provide a variety of products including USB3.0 cameras, USB2.0 cameras, GigE cameras, LVDS cameras, LVDS-USB converters, LVDS-GigE converters, Device drivers and customized hardware/software applications.
Product and Service: USB3.0 CCD CAMERAUSB3.0 CMOS CAMERAUSB3.0 NIR CAMERAUSB3.0 High Speed CAMERAUSB2.0 CCD CAMERAUSB2.0 CMOS CAMERAUSB2.0 InGaAs CAMERAUSB2.0 NIR CAMERAUSB2.0 UV CAMERAUSB2.0 Thermo CAMERAGigE CCD CAMERAGigE CMOS CAMERAGigE Thermo CAMERA4K2K CAMERAHDMI CAMERAAuto Focus CAMERALVDS-USB CONVERTERANALOG-USB CONVERTERLVDS-GigE CONVERTER
SEIWA OPTICAL CO., LTD.4-12-17 Yayoi-cho, Nakano-ku, Tokyo, Japan 164-0013
T: +813 3383 6301F: +813 3383 6304E: [email protected]: www.seiwaopt.co.jp
SEIWA OPTICAL celebrate 50 years by designing and manufacturing Optics. Based on the optical technology, we supply microscope and machine vision system for inspection and QC control purpose of PCB and many kinds of other substrate.
Product and Service: Equipment 1) LED Mask Aligner 2) Wafer Alignment Inspection System 3) Auto Optical Inspection systemMicroscope 1) Though Hole Scope 2) Wide Field of View Telecentric Lens 3) Digital Microscope with HDMI camera
