Jersey city data cabling

JDTECH… SOLUTIONS THAT WORK!

HOW TO PROPERLY RUN ETHERNET CABLING

FOR NETWORK CONFIGURATION.

JDTECH PROVIDES DATA & VOICE DATA CABLING SERVICES

IN JERSEY CITY, NJ AND SURROUNDING AREAS.

JDTECH… SOLUTIONS THAT WORK!

WWW. JDTECHSOLUTIONS.NET | 646-500-0032 | [email protected]

Let’s start with the basics to have a better understanding of data and voice communication.

What is Ethernet: is a technology protocol for local networks (LAN). It set the communication standards such as cable length, transfer speed, data transfer, etc. Ethernet has become the defacto LAN communication standard replacing other technologies such as Token Ring, FDDI, and ARCNET.

What type of cable should I use: It depends on various factors, though most office environments would suffice with Category 5 and above for data and VoIP communication there are variables that may lead you to a one or the other.

Jdtech is a jersey city computer repair company proving: jersey city network support, jersey city data cabling, jersey city network support, jersey city computer help, jersey city virus removal and all IT solutions for small and mid-sized businesses. We are located in jersey city and serve all Hudson County and NYC. What type of Ethernet cable should I buy, how to run data cables, jersey city security companies. What is a patch panel, how do I run network cables. Data cabling companies in jersey city , jersey city pc help, jersey city VoIP

Category 3: Obsolete, don’t even ask for it.

Category 4: Obsolete, mostly used in telephone networks.

Category 5: Twisted pair for carrying signals. Used for data, voice, and video. Don’t go for it, get Cat 5e instead

Category 5e: Enhanced Cat 5, it made improvements in noise cancellation and crosstalk. I recommend Cat 5e as the minimum for Data and VoIP runs. It’s available and affordable, most LANs would suffice with Cat 5e.

Category 6: Standard for Gigabit Ethernet, requires all communication components to be Cat 6 compatible to take advantage of its technology otherwise it degrades its performance. More expensive than Cat 5.


Do I need a patch Panel?: My answer is always yes, specially when I’m the one running the cables or managing the network. Though it is NOT required it really helps in organizing the network. Another huge incentive to use patch panel is that it helps in a layered security approach.

Should I Use T568A or T568B?: Doesn’t matter, just stick with the same standard from beginning to end and document it. I have seen T568B become the preferred standard in the past few years.

Do I need to hire a licensed electrician to run the cables for me? No, though it wouldn’t hurt to hire one, what you really want is someone who knows the codes and is experienced running cables.


A logical representation of the network topology using a patch panel. Devices plug in to the RJ45 Network Jack, the Ethernet connection is available in the form of RJ45 ports in the front end and connects to the Patch Panel in the backend. The Patch Panel Port is plugged in to the network Switch to “make the port live.”


End device connects to RJ45 Ethernet jack with straight through cable

Ethernet run terminates on the back of patch panel.

Front face of patch panel ports connect to network switch


DO YOU NEED DATA RUNS IN JERSEY CITY?

Call us at 646-500-0032. We’d love to come onsite and give you an estimate for the cable runs. We offer reliable, efficient, and cost effective solutions, our deliver results on time with the highest quality standards.

JDTech… Solutions that Work!

www.jdtechsolutions.net | info@ jdtechsolutions.net | 646-500-0032


http://www.jdtechsolutions.net/

Date post:	15-May-2015
Category:	Business
Upload:	jdtechsolutions
View:	18 times
Download:	0 times

Jersey city data cabling

Business