JG Low Tensile 2004

8/6/2019 JG Low Tensile 2004

1/12

Price List 2004

Low Tensile Fastners

HEADOFFICEADDRESS

Unit F2 3-29 Birni e Avenue

Lidcome NSW2141 Australia

Telephone (02) 9737 5252

Facsimile (02) 9737 0028

Email [email protected]

Outside Metropolitan area telephone freecall

(1-800) 112 415

POSTAL ADDRESS

Private Bag 2002

Lidcombe NSW1825 Australia

VICTORIA

114 Boundary Road, Braeside, VIC 3195

Telephone (03) 9587 1966

Facsimile (03) 9580 9141


Outside the Metropolitan area t elephone

(1-800) 331 739

WESTERN AUSTRALIA

54 Wittenburg Drive, Canning Vale, WA6155

Telephone (08) 9456 5955

Facsimile (08) 9456 5911



(1-800) 998 415

QUEENSLAND

12 Breene Place, Morningside, QLD4170

Telephone (07) 3395 5266

Facsimile (07) 3395 6860

email [email protected]


(1-800) 112 415

TASMANIA

c/- R.M. Daniels & Co. Pty. Ltd.

29 Mornington Road, Mornington TAS 7018

Telephone (03) 6244 7455

Facsimile (03) 6244 7317

NEW ZEALAND

5 Industry Road, Penrose, Auckland 1006

Telephone (09) 571 0007

Facsimile (09) 571 2111Email [email protected]

Outside the Auckland area telephone

(0800) 804 536

Email: [email protected] Inter net: www.jglen.com


2/12

PAGE 2Hexagon Head Bolts & Nuts Metric Class 4.6 Zinc & Galvanised

PAGE 8Hexagon Head Bolts & Nuts Mild Steel Zinc & Galvanised

PAGE 10Hexagon Set Screws Metric Class 4.6 Zinc & Galvanised

PAGE 11Hexagon Set Screws Mild Steel Zinc & Galvanised

PAGE 12Cup Head Bolts & Nuts Metric Class 4.6 Zinc & Galvanised

PAGE 14Cup Head Bolts & Nuts Mild Steel Zinc & Galvanised

PAGE 15Hexagon Coach Screw Zinc & Galvanised

PAGE 17Hexagon Nuts BSW Zinc & Galvanised

PAGE 18Nylon Insert Lock Nuts UNC& UNF ZincNylon Insert Lock Nuts BSW ZincNylon Insert Lock Nuts Metric Zinc

PAGE 18 - 19

Wing Nuts Steel Metric ZincWing Nuts Steel BSW Zinc

PAGE 19Flat Round Washers Imperial Engineers Quality Bright Steel ZincFlat Round Washers Metric Engineers Quality Bright Steel Zinc

PAGE 20Flat Round Washers Metric Commercial Zinc & GalvanisedFlat Round Washers Imperi al Bright Steel Large O.D ZincSpring Washers Medium Flat Section

THE BEST DESERVES THE BEST PAGE 1

Price List 2004Low Tensile Products

PAGE 3 THE BEST DESERVES THE BEST

Welcome to our 2004 edition Low Tensile Fasteners Price List

Thank you for selecting the James Glen range of quality Low Tensile Fasteners. Regular users of our catalogue will notice

the differences from the previous production, we trust t hat this new design and changes to our range will make it easier to

use. See back cover for full contact details of i ndividual branches includi ng: address, phone, fax and email details or vi sit

our web site at: www.jglen.com

Rememember, when ordering your Low Tensile products please consider the other ranges we offer.


3/12


Price List 2004

Hexagon Head Bolts & Nuts Metric Class 4.6 AS/NZS 1111 AS/NZS 1112

Diameter M6 1.0mm Pitch Zinc

Length Pkt Qty Part No. Excl. GST $

20 100 32208 42.88

25 100 32209 45.33

30 100 32210 52.68

35 100 32211 57.58

40 100 31627 58.80

45 100 32212 64.93

50 100 32213 66.15

60 100 32215 83.30

65 100 32217 93.10

70 100 32218 143.33

75 100 32220 166.60

80 100 32221 175.18

90 100 32226 231.53

100 100 32228 242.55

120 100 32230 275.63

Price Per 100

Low Tensile Products



Diameter M10 1.5mm Pitch Zinc M10 1.5mm Pitch Galvanised

Length Pkt Qty Part No. Excl. GST $ Part No. Excl. GST $

20 100 32321 88.20 31964 113.93

25 100 32323 91.88 31965 129.85

30 100 32326 104.13 31966 149.45

35 100 32329 109.03 31968 165.38

40 100 32331 111.48 31970 167.83

45 100 32332 133.53 31971 198.45

50 50 32333 138.43 31972 200.90

55 50 32334 169.05

60 50 32336 175.18 31974 280.53

65 50 32338 177.63 31976 287.88

70 50 32340 186.20 31981 294.00

75 50 32343 188.65 31984 300.13

80 50 32344 204.58

90 50 32346 207.03 31988 349.13

100 50 32347 257.25 31990 372.40

110 50 32534 289.10

120 50 32348 432.43 31992 478.98

130 50 32350 465.50 31994 524.30

140 50 32352 490.00 31997 554.93

150 50 32354 496.13 31999 562.28

170 25 32001 670.08

180 25 32004 711.73

200 25 32005 757.05

220 25 32006 1,227.45

260 25 32008 1,379.35

300 25 32017 1,467.55

Price Per 100

Hexagon Head Bolts & Nuts Metric Class 4.6 AS/NZS 1111 AS/NZS 1112Diameter M8 1.25mm Pitch Zinc M8 1.25mm Pitch Galvanised


20 100 32242 64.93 33998 85.00

25 100 32244 66.15 33999 86.00

30 100 32247 74.73 34000 102.00

35 100 32249 78.40 34001 109.00

40 100 32251 80.85 34002 115.00

45 100 32253 86.98

50 100 32255 90.65 34003 145.00

55 100 32258 109.03

60 100 32260 111.48

65 100 32262 124.95 34004 176.00

70 100 32264 151.90

75 100 32267 222.95 34005 237.00

80100

32269 242.5590 100 32274 253.58 34006 273.00

100 100 32278 289.10 34007 289.00

120 100 32282 340.55

130 100 32318 341.78

Price Per 100


4/12







20 100 32530 178.85

25 100 32356 142.10 32018 178.85

30 100 32358 150.68 32020 181.30

35 100 32360 150.68 32022 197.23

40 100 32363 175.18 32024 204.58

45 100 32364 193.55 32025 225.40

50 50 32365 196.00 32026 231.53

60 50 32368 268.28 32028 418.95

65 50 32369 297.68 32029 433.65

70 50 32370 291.55 32030 459.38

75 50 32372 322.18 32031 467.95

80 50 32374 368.73 32032 496.13

90 50 32377 376.08 32033 507.15

100 50 32378 436.10 32034 514.50

110 50 32535 477.75 32035 608.83

120 50 32380 543.90 32036 618.63

130 50 32382 550.03 32037 649.25

140 50 32383 634.55

150 50 32385 641.90 32039 725.20

160 25 32040 759.50

170 25 32041 797.48

180 25 32047 809.73

200 25 32073 883.23

220 25 32074 1,299.73

240 25 32075 1,320.55

350 10 32080 1,808.10

260 25 32076 1,435.70

280 25 32077 1,452.85

300 25 32078 1,468.78

Price Per 100




25 50 32386 275.63 32083 355.25

30 50 32389 279.30 32084 363.83

35 50 32390 285.43 32085 367.50

40 50 32391 330.75 32086 412.83

45 50 32393 327.08 32087 442.23

50 50 32395 371.18 32088 470.40

55 50 32397 467.95 32089 554.93

60 50 32398 472.85 32090 562.28

65 50 32400 521.85 32091 590.45

70 50 32401 595.35 32092 646.80

75 25 32403 616.18 32093 657.83

80 25 32405 775.43 32094 894.25

85 25 32095 923.65

90 25 32407 809.73 32096 933.45

100 25 32408 820.75 32097 945.70

110 25 32537 890.58 32098 1,101.28

120 25 32410 1,008.18 32099 1,119.65

130 25 32411 1,095.15 32100 1,169.88

140 25 32412 1,220.10 32101 1,285.03

150 25 32413 1,341.38 32102 1,326.68

160 25 32103 1,391.60

170 25 32104 1,408.75

180 25 32105 1,424.68

200 25 32107 1,458.98

220 25 32108 1,755.43

240 25 32109 1,843.63

260 25 32111 1,940.40

280 25 32113 1,989.40

300 25 32115 2,084.95

350 10 34009 2,713.38

400 10 34011 2,944.90

450 10 34013 3,483.90

500 10 34015 3,837.93

Price Per 100


5/12







40 25 32415 721.53 32216 763.18

45 25 32416 716.63 32219 782.78

50 25 32417 790.13 32222 809.73

55 25 32223 965.30

60 25 32419 937.13 32225 992.25

65 25 32420 1,069.43 32227 1,040.03

70 25 32421 1,024.10 32229 1,114.75

75 25 32422 1,064.53 32231 1,128.23

80 25 32423 1,161.30 32233 1,229.90

85 25 32235 1,421.00

90 25 32424 1,375.68 32236 1,474.90

100 20 32425 1,512.88 32237 1,474.90

110 20 32536 1,700.30 32238 1,549.63

120 20 32426 1,801.98 32239 1,891.40

130 20 32427 1,997.98 32240 1,915.90

140 20 32428 2,234.40 32241 2,028.60

150 20 32429 2,252.78 32243 2,149.88

160 25 32245 2,242.98

170 20 32246 2,370.38

180 20 32248 2,396.10

200 10 32250 2,619.05

220 10 32252 3,394.48

240 10 32254 3,563.53

260 10 32256 3,719.10

280 10 32257 4,006.98

300 10 32259 4,051.08

325 10 32261 4,365.90

350 10 32263 4,414.90

375 10 32265 4,646.43

400 10 32266 4,753.00

425 10 32268 5,238.10

450 10 32270 5,429.20

500 10 32271 5,924.10

600 10 32275 6,867.35

Price Per 100


Diameter M24 3.0mm Pitch Galvanised


50 25 32277 2,119.25

60 25 32279 2,143.75

65 25 32280 2,170.70

70 25 32283 2,196.43

75 25 32284 2,225.83

80 20 32289 2,396.10

90 20 32293 2,453.68

100 20 32294 2,600.68

110 20 32296 3,098.03

120 20 32298 3,129.88

130 20 32306 3,294.03

140 20 32307 3,540.25

150 10 32308 3,668.88

180 10 32310 4,013.10

200 10 32313 4,282.60

240 10 32315 5,447.58

260 10 32316 5,769.75

300 10 32319 6,159.30

325 10 32322 6,497.40

350 10 32325 6,573.35

400 5 32330 6,711.78

500 5 32339 7,628.08

550 5 32341 8,929.03

600 5 32342 9,062.55

Price Per 100


6/12




Hexagon Bolts & Nuts Mild Steel AS/NZS 2451

Diameter 1/4 BSW Zinc 5/16 BSW Zinc 3/8 BSW Zinc

Length Pkt Qt y Par t No. Excl . GST $ Pkt Qty Par t No. Excl. GST $ Pk t Qt y Par t No. Excl . GST $

3/4 100 31772 44.10 100 31795 67.38 100 31820 86.98

1 100 31773 46.55 100 31797 72.28

1.1/4 100 31775 52.68 100 31799 77.18 100 31825 101.68

1.1/2 100 31776 56.35 100 31801 79.63 100 31827 111.48

1.3/4 100 31777 66.15 100 31803 86.98 100 31829 123.73

2 100 31778 67.38 100 31804 93.10 100 31628 123.73

2.1/4 100 31779 68.60 100 31806 96.78 100 31832 145.78

2.1/2 100 31781 77.18 100 31808 101.68 100 31834 145.78

3 100 31785 96.78 100 31812 132.30 100 32539 162.93

3.1/2 100 31786 120.05 100 31813 150.68 50 31839 196.00

4 100 31788 138.43 100 31814 175.18 50 31841 221.73

4.1/2 100 31790 154.35 100 31815 205.80 50 31843 252.35

5 100 31791 170.28 100 31817 227.85 50 31844 267.05

5.1/2 100 100 31818 258.48 50 31845 338.10

6 100 31819 289.10 50 31846 343.00

Price Per 100

Hexagon Head Bolts & Nuts Mild Steel AS/NZS 2451Diameter 1/2 BSW Zinc 1/2 BSW Galvanised


1 25 31847 211.93 34107 297.12

1.1/4 25 31848 238.88 34108 334.43

1.1/2 25 31849 245.00 34109 343.43

1.3/4 25 31850 274.40

2 25 31851 276.85 34111 387.16

2.1/4 25 31853 294.00

2.1/2 25 31854 311.15 34112 436.04

3 25 31857 374.85 34113 526.08

3.1/2 25 31858 396.90 34114 556.95

4 25 31859 453.25 34115 635.41

4.1/2 25 31860 558.60

5 25 31861 579.43 34116 812.91

5.1/2 25 31862 623.53

6 25 31863 661.50 34117 927.39Price Per 100

Hexagon Head Bolts & Nuts Mild Steel AS/NZS 2451

Diameter 5/8 BSW Zinc 5/8 BSW Galvanised


1 20 31864 456.93

1.1/4 20 34118 598.11

1.1/2 20 31867 497.35 34119 601.97

1.3/4 20 34120 653.42

2 20 31869 558.60 34121 661.13

2.1/4 20 34122 810.34

2.1/2 20 31871 623.53 34123 818.06

2.3/4 20 31872 643.13 34124 995.56

3 20 31873 644.35 34125 1,008.42

3.1/2 20 31875 779.10 34126 1,116.47

4 20 31876 840.35 34127 1,139.62

4.1/2 20 31877 913.85

5 20 31881 1,146.60 34128 1,535.78

5.1/2 20 31884 1,340.15

6 20 31886 1,354.85 34129 1,929.38

Price Per 100

Hexagon Head Bolts & Nuts Mild Steel AS/NZS 2451Finish 3/4 BSW Zinc 3/4 BSW Galvanised


1.1/2 20 31888 1,064.53 34130 1,232.23

2 20 31892 1,075.55 34131 1,292.68

2.1/2 20 31895 1,173.55 34132 1,360.85

3 20 31899 1,292.38 34133 1,492.05

3.1/2 20 31901 1,506.75 34134 1,730.01

4 20 31902 1,636.60 34135 1,840.62

4.1/2 20 31904 1,786.05

5 20 31906 1,942.85

6 20 31909 2,046.98

Price Per 100


7/12




Hexagon Set Screws Metric Class 4.6 AS/NZS 1111

Diameter M4 0.7mm Pitch Zinc M5 0.8mm Pitch Zinc M6 1.0mm Pitch Zinc

Length Pkt Qt y Par t No. Excl . GST $ Pkt Qty Par t No. Excl. GST $ Pk t Qt y Par t No. Excl . GST $

10 200 32063 110.25 200 32119 110.25 200 32134 29.40

12 200 32064 101.98 200 32120 113.01 200 32136 31.85

16 200 32065 104.74 200 32121 115.76 200 32138 33.08

20 200 32066 107.49 200 32122 118.53 200 32140 35.53

25 200 32067 110.25 200 32123 124.03 200 32141 39.20

30 200 32068 113.01 200 32125 135.06 200 32143 53.90

35 200 32127 140.57 200 32145 61.25

40 200 32129 143.33 200 31633 68.60

50 100 32132 154.35 100 32150 107.80

75 100 32152 2 45.00

Price Per 100

Hexagon Set Screws Mild Steel AS/NZS 2451


Length Pkt Qt y Par t No. Excl . GST $ Pkt Qty Par t No. Excl. GST $ Pkt Qty Par t No. Exc l. GST $

3/8 200 31911 110.25

1/2 200 31913 113.01 200 31926 31.85 200 31987 51.45

5/8 200 31928 33.08 200 31989 52.68

3/4 200 31917 118.52 200 31930 34.30 200 31991 53.90

1 200 31919 124.03 200 31975 36.75 200 31993 55.13

1.1/4 200 31977 55.13 200 31995 88.20

1.1/2 200 31922 135.06 200 31979 75.95 200 31996 90.65

1.3/4 100 31980 120.05

2 200 31923 143.33 100 31982 121.28 100 32000 121.28

2.1/2 100 31983 138.43 100 32002 158.03

3 100 32003 193.55

Price Per 100

Hexagon Set Screws Mild Steel AS/NZS 2451


Length Pkt Qt y Par t No. Excl . GST $ Pkt Qty Par t No. Excl. GST $ Pkt Qty Par t No. Exc l. GST $

1/2 200 32009 63.705/8 200 32011 64.31

3/4 200 32012 64.93 100 32043 249.90

1 200 32013 66.15 100 32044 253.58

1.1/4 100 32014 83.30 100 32045 271.95

1.1/2 100 32015 113.93 100 32046 275.63 50 32056 503.48

1.3/4 100 32016 142.10

2 100 31634 151.90 50 32049 303.80 50 32057 535.33

2.1/2 100 32019 232.75 50 32050 376.08 25 32059 727.65

3 100 32021 252.35 50 32051 510.83 25 32060 730.10

4 100 32042 352.80 25 32053 656.60 25 32062 796.25

Price Per 100

Hexagon Set Screws Metric Class 4.6 AS/NZS 1111

Diameter M8 1.25mm Pitch Zinc M10 1.5mm Pitch Zinc M12 1.75mm Pitch Zinc

Length Pkt Qt y Par t No. Excl . GST $ Pkt Qty Par t No. Excl. GST $ Pk t Qt y Par t No. Exc l. GST $

12 200 32153 58.80 100 32171 88.20

16 200 32154 61.25 100 32172 84.53

20 200 32155 62.48 100 32173 85.75 100 32185 164.1525 200 32156 64.93 100 32174 86.98 100 32187 176.40

30 200 32157 85.75 100 32175 88.20 100 32189 184.98

35 200 32159 101.68 100 32176 144.55 100 32192 193.55

40 200 32161 110.25 100 32177 188.65 100 32193 196.00

45 100 32178 219.28

50 100 32165 160.48 50 32179 248.68 50 32197 249.90

60 50 32198 287.88

65 100 32167 268.28 50 32180 296.45

75 100 32170 323.40 50 32181 312.38 50 32201 361.38

90 50 32182 407.93 50 32203 527.98

100 50 32184 414.05 25 32204 564.73

Price Per 100

Hexagon Set Screws Metric Class 4.6 AS/NZS 1111Diameter M16 2.0mm Pitch Zinc


30 50 32205 398.13

40 50 32206 466.73

50 50 32207 492.45

Price Per 100


8/12




Cup Head Bolts & Nuts Metric Class 4.6 AS/NZS 1390 AS/NZS 1112

Finish M6 Galvanised


40 200 34066 112.70

50 200 34068 124.95

75 100 34071 171.50

100 100 34073 220.50

Price Per 100




20 100 34075 127.40

25 100 34076 138.43

30 100 34077 142.10

40 100 34078 148.23

50 100 34079 155.58

65 100 34081 161.70

75 100 34083 203.35

90 100 34084 213.15

100 100 34085 225.40

120 100 34086 318.50

Price Per 100

Cup Head Bolts & Nuts Metric Class 4.6 AS/NZS 1390 AS/NZS 1112Finish M10 Galvanised


25 100 32531 188.65

40 100 32388 236.43

50 100 32392 256.03

60 100 32532 260.93

65 100 32394 270.73

70 100 32396 278.08

75 100 32399 282.98

85 50 34091 307.48

90 50 32404 308.70

100 50 32406 311.15

110 50 32533 350.35

120 50 32409 360.15

130 50 32433 368.73

140 50 32437 403.03

150 50 32450 406.70

160 50 32453 586.78

170 50 32456 586.78

180 50 32462 607.60

190 50 32464 645.58

200 50 32467 649.25

220 50 32469 732.55

240 50 32471 777.88

260 50 32473 820.75

280 50 32475 910.18

300 50 32478 926.10

Price Per 100




30 100 32480 325.85

40 100 32483 349.13

50 100 32484 372.40

65 100 32485 380.98

70 100 32486 442.23

75 100 32487 444.68

85 50 32488 467.95

90 50 32489 476.53

100 50 32490 478.98

120 50 32491 541.45

130 50 32492 562.28

140 50 32493 594.13

150 50 32494 618.63

160 50 32495 857.50

170 50 32496 857.50

180 50 32497 884.45

200 50 32499 919.98

220 50 32500 939.58

240 50 32501 997.15

260 50 32502 1,199.28

280 50 32503 1,229.90

300 50 32504 1,294.83

350 50 34094 1,629.25

Price Per 100




50 50 32505 988.58

65 50 32506 1,014.30

75 50 32507 1,022.88

90 50 32508 1,155.18

100 50 32509 1,204.18

120 50 32510 1,217.65

130 50 32511 1,353.63

150 50 32513 1,383.03160 25 32514 1,533.70

170 25 32515 1,630.48

180 25 32517 1,662.33

200 25 32520 1,846.08

220 25 32522 1,879.15

240 25 32523 1,895.08

280 25 32525 2,481.85

300 25 32526 2,563.93

Price Per 100


9/12




Cup Head Bolts & Nuts Mild Steel AS B108

Finish 3/8 BSW Zinc 1/2 BSW Zinc

Length Pkt Qty Part No. Excl. GST $ Pkt Qty Part No. Excl. GST $

1 100 31852 101.68

1.1/2 100 31855 111.48 25 31910 270.73

1.3/4 100 31865 135.98

2 100 31636 139.65 25 31914 300.13

2.1/2 100 31878 147.00 25 31918 313.60

3 50 31879 150.68 25 31920 343.00

3.1/2 50 31880 209.48 25 31924 439.78

4 50 31882 215.60 25 31927 465.50

4.1/2 50 31883 225.40 25 31929 520.63

5 50 31885 243.78 25 31931 563.50

5.1/2 50 31887 270.73 25 31932 592.90

6 50 31889 280.53 25 31933 592.90

6.1/2 50 31890 371.18 25 31935 623.53

7 50 31893 414.05 25 31936 715.40

8 50 31896 452.03 25 31937 840.35

9 50 31898 539.00 25 31938 997.15

10 50 31900 635.78 25 31939 1,109.85

11 50 31903 655.38 25 31940 1,128.23

12 50 31908 671.30 25 31941 1,187.03

Price Per 100

Cup Head Bolts & Nuts Mild Steel AS B108

Finish 1/4 BSW Zinc 5/16 BSW Zinc


1 100 31774 44.10 31816 71.05

1.1/4 100 31780 46.55 31822 77.18

1.1/2 100 31782 52.68 31823 80.85

1.3/4 100 31784 57.58

2 100 31787 60.03 31828 96.78

2.1/4 100 31789 67.38

2.1/2 100 31792 71.05 31830 101.68

3 100 31796 79.63 31831 134.75

3.1/2 100 31800 113.93 31833 147.00

4 100 31802 120.05 31835 160.48

4.1/2 100 31805 142.10 31837 183.75

5 100 31807 153.13 31838 205.80

5.1/2 100 31809 160.48 31840 220.50

6 100 31811 164.15 31842 243.78

Price Per 100

Hexagon Coach Screws AS/NZS 1393

Finish M10 Zinc M10 Galvanised


40 100 32303 96.78 100 32446 184.98

50 100 32304 113.93 100 32447 205.80

65 100 32305 133.53 100 32448 237.65

75 100 32312 149.45 50 32449 241.33

90 100 32328 199.68 50 32451 319.73

100 100 32349 209.48 50 32452 320.95

120 50 32454 394.45

130 50 32353 274.40 50 32455 426.30

150 50 32355 346.68 50 32457 467.95

Price Per 100




30 100 32292 72.28 32439 138.43

40 100 32295 73.50 32440 138.43

50 100 32297 85.75 32441 156.80

65 100 32299 99.23 32442 227.85

75 100 32300 118.83 32443 249.90

100 100 32302 156.80 32445 303.80

Price Per 100


Finish M6 Zinc


25 100 32276 40.43

30 100 32281 45.33

40 100 31645 47.78

50 100 32285 53.90

65 100 32286 72.28

Price Per 100


10/12







50 50 32357 289.10 25 32459 518.18

65 50 32359 318.50 25 32460 536.55

75 50 32361 324.63 25 32461 536.55

90 50 32362 406.70

100 50 32366 416.50 25 32465 588.00

120 25 32466 692.13

130 50 32371 480.20 25 32468 735.00

150 50 32373 553.70 25 32470 757.05

200 25 32472 1,690.50

Price Per 100




50 50 32474 1,091.48

75 25 32476 1,136.80

100 25 32477 1,282.58

150 25 32481 1,806.88

200 25 32482 2,022.48

Price Per 100

Hexagon Nuts BSW AS/NZS2451

Finish Zinc Zinc

Diameter Pkt Qty Part No. Excl. GST $ Bulk Pkt Qty Part No. Excl. GST $

1/8 200 33111 13.84

5/32 200 33113 14.21

3/16 200 33117 14.33 10000 33100 8.33

1/4 200 33119 15.19 5000 33102 10.29

5/16 200 33120 24.75 4000 33104 16.91

3/8 200 33122 42.26 3000 33105 23.28

1/2 150 31765 108.41 1000 33107 73.13

5/8 50 33375 190.00 500 33108 140.75

3/4 50 33115 447.62 250 33109 336.39

Price Per 100


Finish Galvanised Galvanised

Diameter Pkt Qty Part No. Excl. GST $ Bulk Pkt Qty Part No. Excl. GST $

5/16 4000 34036 31.73

3/8 3000 34037 37.98

1/2 150 37635 130.95 1000 34038 108.41

5/8 500 34039 209.72

3/4 250 34040 416.62

7/8 250 34041 532.02

1 100 34053 585.55

1.1/4 50 34043 1,689.28

1.1/2 50 34044 3,271.98

Price Per 100


Finish Black

Diameter Bulk Pkt Qty Part No. Excl. GST $

1/4 5000 34045 8.58

5/16 4000 34046 14.33

3/8 3000 34047 22.54

1/2 1000 34048 59.17

5/8 500 34049 112.58

3/4 250 34050 268.897/8 250 34051 419.44

1 100 34052 463.05

1.1/8 100 34054 1,141.09

1.1/4 50 34055 1,267.88

1.1/2 50 34056 2,465.31

1.3/4 25 34057 4,930.63

2 25 34058 5,494.13

Price Per 100


11/12




Nylon Insert Lock Nuts Metric DIN 985

Finish Zinc

Diameter Pkt Qty Part No. Excl. GST $

M4 100 33404 16.90

M5 100 33405 16.90

M6 100 33406 16.90

M8 100 33407 23.40

M10 100 33408 46.80

M12 100 33409 87.10

M14 100 33994 121.03

M16 100 33410 128.44

M20 50 33411 270.40

M24 25 33412 794.69

Price Per 100

Nylon Insert Lock Nuts BSW JG91

Finish Zinc


3/16 100 33420 27.82

1/2 100 33424 158.34

Price Per 100

Nylon Insert Lock Nuts UNC & UNF NM-NE

Finish UNC - Zinc UNF - Zinc


10-24 / 10-32 100 33427 16.12 33447 17.81

1/4 100 33428 17.81 33445 19.89

5/16 100 33429 19.89 33446 23.79

3/8 100 33430 31.20 33448 35.88

7/16 100 33431 56.81 33449 56.81

1/2 100 33432 80.60 33450 80.60

5/8 100 33433 141.96 33451 162.76

3/4 50 33434 226.98 33452 228.54

7/8 50 33435 900.64 33453 1,035.19

1 25 33436 1,299.48 33454 1,393.60

Price Per 100

Wing Nuts Steel Metric JG53

Finish Zinc


M4 200 31769 80.12

M5 200 33162 80.97

M6 200 33164 101.31

M8 100 33165 137.69

M10 100 33166 192.33

M12 100 33168 545.13

Price Per 100

Wing Nuts Steel BSW JG53

Finish Zinc


3/16 200 33191 80.73

1/4 200 33193 101.31

5/16 100 33194 137.6

3/8 100 33197 192.33

Price Per 100

Flat Round Washers Imperial Engineers Quality Bright Steel BS 3410

Finish Zinc

Size Outside Gauge Pkt Qty Part No. Excl. GST $

1/8 3/8 20 200 33580 5.89

5/32 3/8 20 200 33581 5.89

3/16 7/16 20 200 33582 6.21

3/16 1/2 20 200 33583 7.35

1/4 1/2 20 200 33584 8.48

1/4 5/8 18 200 33585 10.18

5/16 5/8 18 200 33586 10.18

5/16 3/4 18 200 33587 12.75

3/8 3/4 16 200 33588 15.85

3/8 7/8 16 200 33589 20.53

3/8 1 16 200 38082 23.03

7/16 7/8 16 200 33590 20.53

1/2 1 16 200 33591 25.88

1/2 1.1/8 16 200 33592 33.04

5/8 1.1/4 15 200 33593 49.54

3/4 1.1/2 14 100 33594 69.16

7/8 1.5/8 14 100 33595 85.25

1 1.7/8 14 100 33596 106.23

Price Per 100

Flat Round Washers Metric Engineers Quality Bright Steel AS 1237

Finish Zinc


M3 7.0 0.5 200 33597 5.18

M4 9.0 0.8 200 33598 5.62

M5 10.0 1.0 200 33599 5.92

M6 12.0 1.2 200 33600 8.45

M8 17.0 1.2 200 33601 11.83

M10 21.0 1.6 200 33602 21.92

M12 24.0 1.6 200 33603 24.95

M16 30.0 2.0 200 33604 45.08

M20 37.0 2.0 100 33605 69.63

M24 44.0 2.0 100 33606 104.00

Price Per 100


12/12




Flat Round Washers Imperial Bright Steel Large O.D BS 3410

Finish Zinc


3/16 3/4 16 200 33569 14.60

3/16 1 16 200 33570 22.38

1/4 3/4 16 200 33571 14.60

1/4 1 16 200 33572 22.38

1/4 1.1/4 16 200 33573 35.21

5/16 1 16 200 33574 22.38

5/16 1.1/4 16 200 33575 35.21

5/16 1.1/2 16 200 33576 63.163/8 1.1/4 16 200 33577 35.21

3/8 1.1/2 16 200 33578 63.16

1/2 2 12 100 33579 168.89

Price Per 100

Flat Round Washers Commercial Quality AS 1237

Finish Zinc Galvanised

Bolt Size Pkt Qty Part No. Excl. GST $ Part No. Excl. GST $

M6 5000 33629 109.03 33642 148.23

M8 4000 33630 183.75 33643 240.10

M10 3000 33631 274.40 33644 360.15

M12 1500 33632 431.20 33645 554.93

M16 1000 33633 701.93 33646 886.90

M20 500 33634 873.43 33647 1,177.23

M24 250 33635 2,458.58 33648 3,029.43

Price Per 100

Spring Washers Medium Flat Section ANSI B18.21.1

Finish Zinc

Size Outside Thickness Pkt Qty Part No. Excl. GST $

1/8 3/64 1/32 200 33667 6.19

3/16 1/16 3/64 200 33669 6.46

1/4 3/32 1/16 200 33670 9.11

5/16 1/8 5/64 200 33671 12.37

3/8 1/8 3/32 200 33672 14.33

1/2 3/16 1/8 200 33674 29.19

9/16 3/16 1/8 200 33675 35.395/8 7/32 5/32 100 33676 49.54

3/4 1/4 3/16 100 33677 85.75

7/8 1/4 7/32 50 33678 132.30

1 5/16 1/4 25 33679 220.50

Price Per 100

Conditions of Sale

1. TERMS:

Strictlynet 30 days from theend of the month in which thegoods aresold.

2. FREIGHT:

Intrastate and interstateorders with a net invoicevalue of $250.00 or more

will be delivered freeinto store. James Glen PtyLtd ( James Glen) reservethe

right to select themethod of transport for F.l.S. deliveries. Whereany special

freight is requested costs will bet ot hecustomers account.

3. PRICES:

a. James Glen reserves the right to amend therecommended prices and

information set out in its current In Stock Fastener List at any time.

b. Thepacket quantiti es referred to in James Glens current In-Stock Fastener

List arethe minimum salequantity. James Glen reservethe right to supply

someproducts in mult iples of Packet Quantity only.

c. special prices on bulk items available on request.

d. GST: Prices shown in t his catalogueas both inclusive and exclusiveof GST.

Customers areli ableto payGSTon all items shown and will becharged at the

applicablerat e.

4. GOODS

a. Goods shall remain the soleand absolute propertyof James Glen as legal or

equitable owner until such timeas the purchaser shall havepaid to JamesGlen theagreed price. Following such payment, tit let ot hegoods shall be

transferred tot hepurchaser provided that payment shall not bedeemed tobe

madeunti l anycheque in payment has been dulyhonoured.

b. Thepurchaser acknowledges that it is in possession of anygoods purchased

from James Glen solelyas baileef or James Glen until such timeas the full

price thereof is paid toJames Glen.

c. Thepurchasers right to possession of thegoods shall ceaseif it does

anything or fails todo anything which would entitle areceiver to take

possession of anyassets or which would entitleany person topresent a

petition for winding up of the purchaser. James Glen mayfor the purposeof

recoveryof i ts goods enter forciblyif necessaryupon anypremises wherethey

arest ored or wherethey arer easonablythought tobe stored and may

repossess and removethe same.

d. If new objects aremade out of the goods supplied, then James Glen will be

deemed the owner of the new goods as suretyfor the payment of the full price

for thematerials supplied.

e. Until full payment for themat erials supplied has been received byJames

Glen, thepurchaser shall keep the materials and new objects (comprising

materials sold) in its capacity as fiduciary owner thereof and if required store

them in such a waythat theycould be separatelyrecognised.

f. Thepurchaser shall beentitled tosell the new objects toa third partyi n the

normal courseof carrying on its business for a full and proper purchaseprice

or at a reduced price with the prior written consent of James Glen.

g. All monies or consideration received bythe purchaser for selling the new

objects or supplies toa third part yshall beheld on trust for James Glen until

such timeas thepurchaser pays the full purchaseprice to James Glen.

5. RETURNS:

a. Goods returned for credit will not be accepted unless authorisedin writing and

accompanied bya request for credit showing theoriginal invoice number,

date and reason for return.

b. Acceptanceof goods returned for credit does not implyagreement toi ssuea

credit note. Acredit notewill onlybe issued if thereturned goods aref ound to

besati sfactoryby James Glen.

c. Wherei ncorrectlyordered goods arereturned freight will be at the customers

expense. Such returns will be subject toa 20% handling chargeand

forwarding freight costs will be recharged as applicable.

d. Goods will not be accepted for return for credit where

1) Traceablepr oducts arenot returned in their original sealedpackets.

2) Anygoods arecut or otherwisereworked topurchasers specifications.

3) Anygoods arespeciallymanufactured to purchasers specifications.

4) Anygoods arealtered or damaged bythe purchaser.

5) Anystandard item, outside of normal product range, is specially

procured.

6) Theterms of clause6 are not complied with.

6. INSPECTIONBY PURCHASER:

Thepurchaser is obliged to open and check all goods supplied and to report

anyall eged deficiencywith details of the invoicenumber and specification of

the claim within 35 days of thedate of delivery. Anyclaims made outsidethat

time will not beaccepted for credit, except wherethe supplyof such goods

breaches a condition proscribed bystatute or regulation which is

unavoidable.

7. DISCLAIMER:

a. Wheret hegoods wereacquired or held out as being acquired for re-supplyor

being used up or transformed, in tradeor commerce, in thecourseof a process

of production manufacture, repair or treating other goods or fixtures on land

then all warranties and conditions express or implied whether byst atute

regulation custom or usageare herebyexpresslyexcluded and James Glen

shall not be liable for anyactual consequential or other loss expenseor

damagearising or related in anyway to thesupply or useof thegoods, or their

non performances.

b. Wheresub- clause(a) does not applyor wherelegislation orregulation

prescribes unavoidablewarranti es or conditions then theliabil ity of James

Glen for anybreach shall be limited to either thereplacement of thegoods, or

the supplyof equivalent goods, or payment of the cost of replacing thegoods

or of acquiring equivalent goods as James Glen in its absolutediscretion

thinks fit.

c. Whilst everycarehas been taken in preparing t his publication, James Glen

shall not beliable to anypurchaser relying on anyfact, matter or

representation. Purchasers should satisfythemselves as to the suitability and

fitness of anyproduct advertised, beforeorder.

d. Whilst everycare has been taken compiling the information and technical

data James Glen will not accept responsibility for subsequent loss or damage

arising from its use. Nothing in theseterms and conditions shall excludeor

modifyany conditional warrantyi mplied bylaw wheret odo sowould render

such terms and conditions void.

8. Anycontract for saleshall bedeemed tobe madein the state of New South

Wales and thelaw, courts or arbitration facilities of that State shall beused

toconstrueor applythe contract or todetermineor resolveanydisputeor

action arising under it.

9. Thesigning of the manifest or deliverydocket for goods received, shall

constitute acceptanceof theseConditions of Sale bythe purchaser.

Date post:	08-Apr-2018
Category:	Documents
Upload:	dagoose81
View:	214 times
Download:	0 times

JG Low Tensile 2004

Documents